arXiv subjects

Akshay Rao

Publications and source records attributed to Akshay Rao.

At least 37 records · Page 2Linked to original sources

arXiv2024

Optical read and write of spin states in organic diradicals

Optical control and read-out of the ground state spin structure has been demonstrated for defect states in crystalline semiconductors, including the diamond NV- center, and these are promising systems for quantum technologies. Molecular organic semiconductors offer synthetic control of spin placement, in contrast to current limitations in these crystalline systems. Here we report the discovery of spin-optical addressability in a diradical molecule that comprises two trityl radical groups coupled via a fluorene bridge. We demonstrate the three important properties that enable operation as a spin-photon interface: (i) triplet and singlet spin states show photoluminescence peaked at 640 and 700 nm respectively; this allows easy optical measurement of ground state spin. (ii) the ground state spin exchange is small (~60 μeV) that allows preparation of ground state spin population. This can be achieved by spin-selective excited state intersystem crossing, and we report up to 8% microwave-driven contrast in photoluminescence. (iii) both singlet and triplet manifolds have near-unity photoluminescence quantum yield, which is in contrast to the near-zero quantum yields in prior reports of molecular diradicals. Our results establish these tuneable open-shell organic molecules as a platform to engineer tailor-made spin-optical interfaces.

cond-mat.mtrl-sci↗

arXiv2024

Extending the Defect Tolerance of Halide Perovskite Nanocrystals to Hot Carrier Cooling Dynamics

Defect tolerance is a critical enabling factor for efficient lead-halide perovskite materials, but the current understanding is primarily on band-edge (cold) carriers, with significant debate over whether hot carriers (HCs) can also exhibit defect tolerance. Here, this important gap in the field is addressed by investigating how internationally-introduced traps affect HC relaxation in CsPbX3 nanocrystals (X = Br, I, or mixture). Using femtosecond interband and intraband spectroscopy, along with energy-dependent photoluminescence measurements and kinetic modelling, it is found that HCs are not universally defect tolerant in CsPbX3, but are strongly correlated to the defect tolerance of cold carriers, requiring shallow traps to be present (as in CsPbI3). It is found that HCs are directly captured by traps, instead of going through an intermediate cold carrier, and deeper traps cause faster HC cooling, reducing the effects of the hot phonon bottleneck and Auger reheating. This work provides important insights into how defects influence HCs, which will be important for designing materials for hot carrier solar cells, multiexciton generation, and optical gain media.

physics.app-ph↗

arXiv2024

Factors Enabling Delocalized Charge-Carriers in Pnictogen-Based Solar Absorbers: In-depth Investigation into CuSbSe2

Inorganic semiconductors based on heavy pnictogen cations (Sb3+ and Bi3+) have gained significant attention as potential nontoxic and stable alternatives to lead-halide perovskites for solar cell applications. A limitation of these novel materials, which is being increasingly commonly found, is carrier localization, which substantially reduces mobilities and diffusion lengths. Herein, the layered příbramite CuSbSe2 is investigated and discovered to have delocalized free carriers, as shown through optical pump terahertz probe spectroscopy and temperature-dependent mobility measurements. Using a combination of theory and experiment, it is found that the underlying factors are: 1) weak coupling to acoustic phonons due to low deformation potentials, as lattice distortions are primarily accommodated through rigid inter-layer movement rather than straining inter-atomic bonds, and 2) weak coupling to optical phonons due to the ionic contributions to the dielectric constant being low compared to electronic contributions. This work provides important insights into how pnictogen-based semiconductors avoiding carrier localization could be identified.

cond-mat.mtrl-sci↗

arXiv2023

Fast near-infrared photodetectors based on nontoxic and solution-processable AgBiS2

Solution-processable near-infrared (NIR) photodetectors are urgently needed for a wide range of next-generation electronics, including sensors, optical communications and bioimaging. However, there is currently a compromise between low toxicity and slow (<300 kHz cut-off frequency) organic materials versus faster detectors (>300 kHz cut-off frequency) based on compounds containing toxic lead or cadmium. Herein, we circumvent this trade-off by developing solution-processed AgBiS2 photodetectors with high cut-off frequencies under both white light (>1 MHz) and NIR (approaching 500 kHz) illumination. These high cut-off frequencies are due to the short transit distances of charge-carriers in the AgBiS2 photodetectors, which arise from the strong light absorption of these materials, such that film thicknesses well below 120 nm are adequate to absorb >65% of near-infrared to visible light. By finely controlling the thickness of the photoactive layer, we can modulate the charge-collection efficiency, achieve low dark current densities, and minimize the effects of ion migration to realize fast photodetectors that are stable in air. These outstanding characteristics enable real-time heartbeat sensors based on NIR AgBiS2 photodetectors. # equal contribution, * corresponding authors

cond-mat.mtrl-sci↗

arXiv2023

Ultrafast In vivo Transient Absorption Spectroscopy

Transient absorption (TA) spectroscopy has proved fundamental to our understanding of energy and charge transfer in biological systems, allowing measurements of photoactive proteins on sub-picosecond timescales. Recently, ultrafast TA spectroscopy has been applied in vivo, providing sub-picosecond measurements of photosynthetic light harvesting and electron transfer processes within living photosynthetic microorganisms. The analysis of the resultant data is hindered by the number of different photoactive pigments and the associated complexity of photoactive reaction schemes within living cells. Here we show how in vivo ultrafast TA spectroscopy can be applied to a diverse array of organisms from the tree of life, both photosynthetic and non-photosynthetic. We have developed a series of software tools for performing global, lifetime and target analysis of in vivo TA datasets. These advances establish in vivo TA spectroscopy as a versatile technique for studying energy and charge transfer in living systems.

physics.bio-ph↗

arXiv2023

Correlating activity and defects in (photo)electrocatalysts using in-situ transient optical microscopy

(Photo)electrocatalysts capture sunlight and use it to drive chemical reactions such as water splitting to produce H2. A major factor limiting photocatalyst development is their large heterogeneity which spatially modulates reactivity and precludes establishing robust structure-function relationships. To make such links requires simultaneously probing of the electrochemical environment at microscopic length scales (nm to um) and broad timescales (ns to s). Here, we address this challenge by developing and applying in-situ steady-state and transient optical microscopies to directly map and correlate local electrochemical activity with hole lifetimes, oxygen vacancy concentration and the photoelectrodes crystal structure. Using this combined approach alongside spatially resolved X-Ray absorption measurements, we study microstructural and point defects in prototypical hematite (Fe2O3) photoanodes. We demonstrate that regions of Fe2O3, adjacent to microstructural cracks have a better photoelectrochemical response and reduced back electron recombination due to an optimal oxide vacancy concentration, with the film thickness and carbon impurities also dramatically influencing activity in a complex manner. Our work highlights the importance of microscopic mapping to understand activity and the impact of defects in even, seemingly, homogeneous solid-state metal oxide photoelectrodes.

physics.chem-ph↗

arXiv2023

Tailoring Interlayer Charge Transfer Dynamics in 2D Perovskites with Electroactive Spacer Molecules

The family of hybrid organic-inorganic lead-halide perovskites are the subject of intense interest for optoelectronic applications, from light-emitting diodes to photovoltaics to X-ray detectors. Due to the inert nature of most organic molecules, the inorganic sublattice generally dominates the electronic structure and therefore optoelectronic properties of perovskites. Here, we use optically and electronically active carbazole-based Cz-Ci molecules, where Ci indicates an alkylammonium chain and i indicates the number of CH2 units in the chain, varying from 3-5, as cations in the 2D perovskite structure. By investigating the photophysics and charge transport characteristics of (Cz-Ci)2PbI4, we demonstrate a tunable electronic coupling between the inorganic lead-halide and organic layers. The strongest interlayer electronic coupling was found for (Cz-C3)2PbI4, where photothermal deflection spectroscopy results remarkably demonstrate an organic-inorganic charge transfer state. Ultrafast transient absorption spectroscopy measurements demonstrate ultrafast hole transfer from the photoexcited lead-halide layer to the Cz-Ci molecules, the efficiency of which increases by varying the chain length from i=5 to i=3. The charge transfer results in long-lived carriers (10-100 ns) and quenched emission, in stark contrast with the fast (sub-ns) and efficient radiative decay of bound excitons in the more conventional 2D perovskite (PEA)2PbI4, in which phenylethylammonium (PEA) acts as an inert spacer. Electrical charge transport measurements further support enhanced interlayer coupling, showing increased out-of-plane carrier mobility from i=5 to i=3. This study paves the way for the rational design of 2D perovskites with combined inorganic-organic electronic proper-ties through the wide range of functionalities available in the world of organics.

physics.app-ph↗

arXiv2023

Generalised Framework for Controlling and Understanding Ion Dynamics with Passivated Lead Halide Perovskites

Metal halide perovskite solar cells have gained widespread attention due to their high efficiency and high defect tolerance. The absorbing perovskite layer is as a mixed electron-ion conductor that supports high rates of ion and charge transport at room temperature, but the migration of mobile defects can lead to degradation pathways. We combine experimental observations and drift-diffusion modelling to demonstrate a new framework to interpret surface photovoltage (SPV) measurements in perovskite systems and mixed electronic ionic conductors more generally. We conclude that the SPV in mixed electronic ionic conductors can be understood in terms of the change in electric potential at the surface associated with changes in the net charge within the semiconductor system. We show that by modifying the interfaces of perovskite bilayers, we may control defect migration behaviour throughout the perovskite bulk. Our new framework for SPV has broad implications for developing strategies to improve the stability of perovskite devices by controlling defect accumulation at interfaces. More generally, in mixed electronic conductors our framework provides new insights into the behaviour of mobile defects and their interaction with photoinduced charges, which are foundational to physical mechanisms in memristivity, logic, impedance, sensors and energy storage.

cond-mat.mtrl-sci↗

arXiv2023

Optical Efficiency Measurements of Large Area Luminescent Solar Concentrators

Luminescent solar concentrators (LSCs) are able to concentrate both direct and diffuse solar radiation and this ability has led to great interest in using them to improve solar energy capture when coupled to traditional photovoltaics (PV). In principle, a large area LSC could concentrate light onto a much smaller area of PV, thus reducing costs or enabling new architectures. However, LSCs suffer from various optical losses which are hard to quantify using simple measurements of power conversion efficiency. Here, we show that spatially resolved photoluminescence quantum efficiency measurements on large area LSCs can be used to resolve various losses processes such as out-coupling, self-absorption via emitters and self-absorption from the LSC matrix. Further, these measurements allow for the extrapolation of device performance to arbitrarily large LSCs. Our results provide insight into the optimization of optical properties and guide the design of future LSCs for improved solar energy capture.

physics.optics↗

arXiv2023

Direct Linearly-Polarised Electroluminescence from Perovskite Nanoplatelet Superlattices

Polarised light is critical for a wide range of applications, but is usually generated by filtering unpolarised light, which leads to significant energy losses and requires additional optics. Herein, the direct emission of linearly-polarised light is achieved from light-emitting diodes (LEDs) made of CsPbI3 perovskite nanoplatelet superlattices. Through use of solvents with different vapour pressures, the self-assembly of perovskite nanoplatelets is achieved to enable fine control over the orientation (either face-up or edge-up) and therefore the transition dipole moment. As a result of the highly-uniform alignment of the nanoplatelets, as well as their strong quantum and dielectric confinement, large exciton fine-structure splitting is achieved at the film level, leading to pure-red LEDs exhibiting a high degree of linear polarisation of 74.4% without any photonic structures. This work unveils the possibilities of perovskite nanoplatelets as a highly promising source of linearly-polarised electroluminescence, opening up the development of next-generation 3D displays and optical communications from this highly versatile, solution-processable system.

physics.optics↗

arXiv2023

Chemical treatments of Monolayer Transition Metal Dichalcogenides and Their Prospect in Optoelectronic Applications

The interest in obtaining high-quality monolayer transition metal dichalcogenides (TMDs) for optoelectronic device applications has been growing dramatically. However, the prevalence of defects and unwanted doping in these materials remains a challenge, as they both limit optical properties and device performance. Surface chemical treatments of monolayer TMDs have been effective in improving their photoluminescence yield and charge transport properties. In this scenario, a systematic understanding of the underlying mechanism of chemical treatments will lead to a rational design of passivation strategies in future research, ultimately taking a step toward practical optoelectronic applications. We will therefore describe in this review the strategies, progress, mechanisms, and prospects of chemical treatments to passivate and improve the optoelectronic properties of TMDs.

physics.chem-ph↗

arXiv2022

Direct Observation of Ultrafast Singlet Exciton Fission in Three Dimensions

We present quantitative ultrafast interferometric pump-probe microscopy capable of tracking of photoexcitations with sub 10 nm spatial precision in three dimensions with 15 fs temporal resolution, through retrieval of the full transient photoinduced complex refractive index. We use this methodology to study the spatiotemporal dynamics of the quantum coherent photophysical process of ultrafast singlet exciton fission. Measurements on microcrystalline pentacene films grown on glass (SiO$_2$) and boron nitride (hBN) reveal a 25 nm, 70 fs expansion of the joint-density-of-states along the crystal a,c-axes accompanied by a 6 nm, 115 fs change in the exciton density along the crystal b-axis. We propose that photogenerated singlet excitons expand along the direction of maximal orbital $π$-overlap in the crystal a,c-plane to form correlated triplet pairs, which subsequently electronically decouples into free triplets along the crystal b-axis due to molecular sliding motion of neighbouring pentacene molecules. This methodology opens a new route for the study of three dimensional transport on ultrafast timescales.

physics.optics↗

arXiv2022

Local Symmetry Breaking Drives Picosecond Spin Domain Formation in Polycrystalline Semiconducting Films

Photoinduced spin-charge interconversion in semiconductors with spin-orbit coupling could provide a route to optically addressable spintronics without the use of external magnetic fields. A central question is whether the resulting spin-associated charge currents are robust to structural disorder, which is inherent to polycrystalline semiconductors that are desirable for device applications. Using femtosecond circular polarization-resolved pump-probe microscopy on polycrystalline halide perovskite thin films, we observe the photoinduced ultrafast formation of spin-polarized positive and, unexpectedly, negative spin domains on the micron scale formed through lateral currents. Further, the polarization of these domains and lateral transport direction is switched upon switching the polarization of the pump helicity. Micron scale variations in the intensity of optical second-harmonic generation and vertical piezoresponse suggest that the spin domain formation is driven by the presence of strong local inversion symmetry breaking via inter-grain structural disorder. We propose that this leads to spatially varying Rashba-like spin textures that drive spin-momentum locked currents, leading to local spin accumulation. Our results establish ultrafast spin domain formation in polycrystalline semiconductors as a new optically addressable platform for nanoscale spin-device physics.

cond-mat.mes-hall↗

arXiv2022

Thermodynamic Limits of Photon-Multiplier Luminescent Solar Concentrators

Luminescent solar concentrators (LSCs) are theoretically able to concentrate both direct and diffuse solar radiation with extremely high efficiencies. Photon-multiplier luminescent solar concentrators (PM-LSCs) contain chromophores which exceed 100\% photoluminescence quantum efficiency. PM-LSCs have recently been experimentally demonstrated and hold promise to outcompete traditional LSCs. However, we find that the thermodynamic limits of PM-LSCs are different and are sometimes more extreme relative to traditional LSCs. As might be expected, to achieve very high concentration factors a PM-LSC design must also include a free energy change, analogous to the Stokes shift in traditional LSCs. Notably, unlike LSCs, the maximum concentration ratio of a PM-LSC is dependent on brightness of the incident photon field. For some brightnesses, but equivalent energy loss, the PM-LSC has a greater maximum concentration factor than that of the traditional LSC. We find that the thermodynamic requirements to achieve highly concentrating PM-LSCs differ from traditional LSCs. The new model gives insight into the limits of concentration of PM-LSCs and may be used to extract design rules for further PM-LSC design.

physics.optics↗

arXiv2022

Photosynthesis re-wired on the pico-second timescale

Photosystems II and I (PSII and PSI) are the reaction centre complexes that drive the light reactions of photosynthesis. PSII performs light-driven water oxidation (quantum efficiencies and catalysis rates of up to 80% and 1000 $e^{-}\text{s}^{-1}$, respectively) and PSI further photo-energises the harvested electrons (quantum efficiencies of ~100%). The impressive performance of the light harvesting components of photosynthesis has motivated extensive biological, artificial and biohybrid approaches to re-wire photosynthesis to enable higher efficiencies and new reaction pathways, such as H2 evolution or alternative CO2 fixation. To date these approaches have focussed on charge extraction at the terminal electron quinones of PSII and terminal iron-sulfur clusters of PSI. Ideally electron extraction would be possible immediately from the photoexcited reaction centres to enable the greatest thermodynamic gains. However, this was believed to be impossible because the reaction centres are buried around 4 nm within PSII and 5 nm within PSI from the cytoplasmic face. Here, we demonstrate using in vivo ultrafast transient absorption (TA) spectroscopy that it is possible to extract electrons directly from photoexcited PSI and PSII, using both live cyanobacterial cells and isolated photosystems, with the exogenous electron mediator 2,6-dichloro1,4-benzoquinone (DCBQ). We postulate that DCBQ can oxidise peripheral chlorophyll pigments participating in highly delocalised charge transfer (CT) states after initial photoexcitation. Our results open new avenues to study and re-wire photosynthesis for bioenergy and semi-artificial photosynthesis.

physics.bio-ph↗

arXiv2022

Photophysical comparison of liquid and mechanically exfoliated WS$_2$ monolayers

Semiconducting transition metal dichalcogenides (TMDs) are desired as active materials in optoelectronic devices due to their strong excitonic effects. They can be exfoliated from their parent layered materials with low-cost and for mass production via a liquid exfoliation method. However, the device application of TMDs prepared by liquid phase exfoliation is limited by their poor photoluminescence quantum efficiencies (PLQE). It is crucial to understand the reason to low PLQE for their practical device development. Here we evaluate the quality of monolayer-enriched liquid phase exfoliated (LPE) WS$_2$ dispersions by systematically investigating their optical and photophysical properties and contrasting with mechanically exfoliated (ME) WS2 monolayers. An in-depth understanding of the exciton dynamics is gained with ultrafast pump-probe measurements. We reveal that the energy transfer between monolayer and few-layers in LPE WS$_2$ dispersions is a substantial reason for their quenched PL. In addition, we show that LPE WS$_2$ is promising to build high performance optoelectronic devices with excellent optical quality.

physics.app-ph↗

arXiv2021

Tuning the coherent propagation of organic exciton-polaritons through dark state delocalization

While there have been numerous reports of long-range polariton transport at room-temperature in organic cavities, the spatio-temporal evolution of the propagation is scarcely reported, particularly in the initial coherent sub-ps regime, where photon and exciton wavefunctions are inextricably mixed. Hence the detailed process of coherent organic exciton-polariton transport and in particular the role of dark states has remained poorly understood. Here, we use femtosecond transient absorption microscopy to directly image coherent polariton motion in microcavities of varying quality factor. We find the transport to be well-described by a model of band-like propagation of an initially Gaussian distribution of exciton-polaritons in real space. The velocity of the polaritons reaches values of ~0.65x10^6 m s-1, substantially lower than expected from the polariton dispersion. Further, we find that the velocity is proportional to the quality factor of the microcavity. We suggest this unexpected link between the quality-factor and polariton velocity and slow coherent transport to be a result of varying admixing between delocalised dark and polariton states.

physics.chem-ph↗

arXiv2021

Operando monitoring of single-particle kinetic state-of-charge heterogeneities and cracking in high-rate Li-ion anodes

Recent years have seen a rapidly escalating demand for battery technologies capable of storing more energy, charging more quickly and having longer usable lifetimes, driven largely by increased electrification of transport and by grid-scale energy storage systems. This has led to the development of many promising new electrode materials for high-rate lithium ion batteries. In order to rationalise and improve upon material performance, it is crucial to understand the fundamental ion-intercalation and degradation mechanisms occurring during realistic battery operation, on the nano- to meso-scale. Here we apply a straightforward laboratory-based operando optical scattering microscopy method to study micron-sized rods of the high-rate anode material Nb$_{14}$W$_3$O$_{44}$ during cycling at rates of up to 30C. We directly visualise an elongation of the rods, which, by comparison with ensemble X-ray diffraction, allows us to determine the state of charge (SOC) of the individual particle. A continuous change in scattering intensity with SOC is also seen, enabling observation of a non-equilibrium kinetic phase separation within individual particles. Phase field modelling (informed by pulsed-field-gradient nuclear magnetic resonance and electrochemical experiments) is used to verify the kinetic origin of this separation, which arises from a dependence of the Li-ion diffusion coefficient upon SOC. Finally, we witness how such intra-particle SOC heterogeneity can lead to particle cracking; we follow the cycling behaviour of the resultant fragments, and show that they may become electrically disconnected from the electrode. These results demonstrate the power of optical scattering microscopy to track rapid non-equilibrium processes, often occurring over less than 1 minute, which would be inaccessible with established characterisation techniques.

physics.app-ph↗