arXiv subjects

Akshay Rao

Publications and source records attributed to Akshay Rao.

At least 55 records · Page 3Linked to original sources

arXiv2021

Dielectric control of reverse intersystem crossing in thermally-activated delayed fluorescence emitters

Thermally-activated delayed fluorescence (TADF) enables organic semiconductors with charge transfer (CT)-type excitons to convert dark triplet states into bright singlets via a reverse intersystem crossing (rISC) process. Here, we consider the role of the dielectric environment in a range of TADF materials with varying changes in dipole moment upon optical excitation. In a dipolar reference emitter, TXO-TPA, environmental reorganisation after excitation in both solution and doped films triggers the formation of the full CT product state. This lowers the singlet excitation energy by 0.3 eV and minimises the singlet-triplet energy gap (ΔEST). Using impulsive Raman measurements, we observe the emergence of two (reactant-inactive) modes at 412 and 813 cm-1 as a vibrational fingerprint of the CT product. In contrast, the dielectric environment plays a smaller role in the electronic excitations of a less dipolar material, 4CzIPN. Quantum-chemical calculations corroborate the appearance of these new product modes in TXO-TPA and show that the dynamic environment fluctuations are large compared to ΔEST. The analysis of the energy-time trajectories and the corresponding free energy functions reveals that the dielectric environment significantly reduces the activation energy for rISC, thus increasing the rISC rate by up to three orders of magnitude when compared to a vacuum environment.

physics.app-ph↗

arXiv2021

Extracting Quantitative Dielectric Properties from Pump-Probe Spectroscopy

Optical pump-probe spectroscopy is a powerful tool for the study of non-equilibrium electronic dynamics and finds wide applications across a range of fields, from physics and chemistry to material science and biology. However, a shortcoming of conventional pump-probe spectroscopy is that photoinduced changes in transmission, reflection and scattering can simultaneously contribute to the measured differential spectra, leading to ambiguities in assigning the origin of spectral signatures and ruling out quantitative interpretation of the spectra. Ideally, these methods would measure the underlying dielectric function (or the complex refractive index) which would then directly provide quantitative information on the transient excited state dynamics free of these ambiguities. Here we present and test a model independent route to transform differential transmission or reflection spectra, measured via conventional optical pump-probe spectroscopy, to changes in the quantitative transient dielectric function. We benchmark this method against changes in the real refractive index measured using time-resolved Frequency Domain Interferometry in prototypical inorganic and organic semiconductor films. Our methodology can be applied to existing and future pump-probe data sets, allowing for an unambiguous and quantitative characterisation of the transient photoexcited spectra of materials. This in turn will accelerate the adoption of pump-probe spectroscopy as a facile and robust materials characterisation and screening tool.

physics.app-ph↗

arXiv2021

Untargeted Effects in Organic Exciton-Polariton Transient Spectroscopy: A Cautionary Tale

Strong light-matter coupling to form exciton- and vibropolaritons is increasingly touted as a powerful tool to alter the fundamental properties of organic materials. It is proposed that these states and their facile tunability can be used to rewrite molecular potential energy landscapes and redirect photophysical pathways, with applications from catalysis to electronic devices. Crucial to their photophysical properties is the exchange of energy between coherent, bright polaritons and incoherent dark states. One of the most potent tools to explore this interplay is transient absorption/reflectance spectroscopy. Previous studies have revealed unexpectedly long lifetimes of the coherent polariton states, for which there is no theoretical explanation. Applying these transient methods to a series of strong-coupled organic microcavities, we recover similar long-lived spectral effects. Based on transfer-matrix modelling of the transient experiment, we find that virtually the entire photoresponse results from photoexcitation effects other than the generation of polariton states. Our results suggest that the complex optical properties of polaritonic systems make them especially prone to misleading optical signatures, and that more challenging high-time-resolution measurements on high-quality microcavities are necessary to uniquely distinguish the coherent polariton dynamics.

physics.chem-ph↗

arXiv2021

Imaging the coherent propagation of collective modes in the excitonic insulator candidate Ta$_2$NiSe$_5$ at room temperature

Excitonic insulators host a condensate of electron-hole pairs at equilibrium, giving rise to collective many-body effects. Although several materials have emerged as excitonic insulator candidates, evidence of long-range coherence is lacking and the origin of the ordered phase in these systems remains controversial. Here, using ultrafast pump-probe microscopy, we investigate the possible excitonic insulator Ta$_2$NiSe$_5$. Below 328 K, we observe the anomalous micrometer-scale propagation of coherent modes at velocities of the order of $\sim10^5$ m/s, which we attribute to the hybridization between phonon modes and the phase mode of the condensate. We develop a theoretical framework to support this explanation and propose that electronic interactions provide a significant contribution to the ordered phase in Ta$_2$NiSe$_5$. These results allow us to understand how the condensate's collective modes transport energy and interact with other degrees of freedom. Our study provides a unique paradigm for the investigation and manipulation of these properties in strongly correlated materials.

cond-mat.str-el↗

arXiv2021

Efficient Energy Transport in an Organic Semiconductor Mediated by Transient Exciton Delocalization

Efficient energy transport is highly desirable for organic semiconductor (OSC) devices such as photovoltaics, photodetectors, and photocatalytic systems. However, photo-generated excitons in OSC films mostly occupy highly localized states over their lifetime. Energy transport is hence thought to be mainly mediated by the site-to-site hopping of localized excitons, limiting exciton diffusion coefficients to below ~10^{-2} cm^2/s with corresponding diffusion lengths below ~50 nm. Here, using ultrafast optical microscopy combined with non-adiabatic molecular dynamics simulations, we present evidence for a new highly-efficient energy transport regime: transient exciton delocalization, where energy exchange with vibrational modes allows excitons to temporarily re-access spatially extended states under equilibrium conditions. In films of highly-ordered poly(3-hexylthiophene) nanofibers, prepared using living crystallization-driven self-assembly, we show that this enables exciton diffusion constants up to 1.1+-0.1 cm^2/s and diffusion lengths of 300+-50 nm. Our results reveal the dynamic interplay between localized and delocalized exciton configurations at equilibrium conditions, calling for a re-evaluation of the basic picture of exciton dynamics. This establishes new design rules to engineer efficient energy transport in OSC films, which will enable new devices architectures not based on restrictive bulk heterojunctions.

cond-mat.mtrl-sci↗

arXiv2021

Nanoscale Chemical Heterogeneity Dominates the Optoelectronic Response over Local Electronic Disorder and Strain in Alloyed Perovskite Solar Cells

Halide perovskites perform remarkably in optoelectronic devices including tandem photovoltaics. However, this exceptional performance is striking given that perovskites exhibit deep charge carrier traps and spatial compositional and structural heterogeneity, all of which should be detrimental to performance. Here, we resolve this long-standing paradox by providing a global visualisation of the nanoscale chemical, structural and optoelectronic landscape in halide perovskite devices, made possible through the development of a new suite of correlative, multimodal microscopy measurements combining quantitative optical spectroscopic techniques and synchrotron nanoprobe measurements. We show that compositional disorder dominates the optoelectronic response, while nanoscale strain variations even of large magnitude (~1 %) have only a weak influence. Nanoscale compositional gradients drive carrier funneling onto local regions associated with low electronic disorder, drawing carrier recombination away from trap clusters associated with electronic disorder and leading to high local photoluminescence quantum efficiency. These measurements reveal a global picture of the competitive nanoscale landscape, which endows enhanced defect tolerance in devices through spatial chemical disorder that outcompetes both electronic and structural disorder.

physics.app-ph↗

arXiv2021

Giant Photoluminescence Enhancement in MoSe$_{2}$ monolayers treated with Oleic Acid Ligands

The inherently low photoluminescence (PL) yields in as prepared transition metal dichalcogenide (TMD) monolayers are broadly accepted to be the result of atomic vacancies (i.e. defects) and uncontrolled doping, which give rise to non-radiative exciton decay pathways. To date, a number of chemical passivation schemes have been successfully developed to improve PL in sulphur based TMDs i.e. molybdenum disulphide (MoS2) and tungsten disulphide (WS2) monolayers. Reports on solution based chemical passivation schemes for improving PL yields in selenium (Se) based TMDs are lacking I comparison, with only one known study that uses hydrobromic acid vapour to improve PL in chemical vapour deposited (CVD) Molybdenum diselenide (MoSe2). Here, we demonstrate that treatment with oleic acid (OA) provides a simple wet chemical passivation method for monolayer MoSe2, enhancing PL yield by an average of 58 fold, while also enhancing spectral uniformity across the material and reducing emission linewidth. Excitation intensity dependent PL reveals trap-free PL dynamics dominated by neutral exciton recombination. Time-resolved PL (TRPL) studies reveal significantly increased PL lifetimes, with pump intensity dependent TRPL measurements also confirming trap free PL dynamics in OA treated MoSe2. Field effect transistors show reduced charge trap density and improved on-off ratios after treatment with OA. These results indicate defect passivation by OA, which we hypothesise act as ligands, passivating chalcogen defects through oleate coordination to Mo dangling bonds.

cond-mat.mtrl-sci↗

arXiv2021

Ultrafast melting and recovery of collective order in the excitonic insulator Ta$_{2}$NiSe$_{5}$

The layered chalcogenide Ta$_{2}$NiSe$_{5}$ has been proposed to host an excitonic condensate in its ground state, a phase that could offer a unique platform to study and manipulate many-body states at room temperature. However, identifying the dominant microscopic contribution to the observed spontaneous symmetry breaking remains challenging, perpetuating the debate over the ground state properties. Here, using broadband ultrafast spectroscopy we investigate the out-of-equilibrium dynamics of Ta$_{2}$NiSe$_{5}$ and demonstrate that the transient reflectivity in the near-infrared range is connected to the system's low-energy physics. We track the status of the ordered phase using this optical signature, establishing that high-fluence photoexcitations can suppress this order. From the sub-50 fs quenching timescale and the behaviour of the photoinduced coherent phonon modes, we conclude that electronic correlations provide a decisive contribution to the excitonic order formation. Our results pave the way towards the ultrafast control of an exciton condensate at room temperature.

cond-mat.str-el↗

arXiv2021

Optical projection and spatial separation of spin entangled triplet-pairs from the S1 (21Ag-) state of pi-conjugated systems

The S1 (21Ag-) state is an optically dark state of natural and synthetic pi-conjugated materials that can play a critical role in optoelectronic processes such as, energy harvesting, photoprotection and singlet fission. Despite this widespread importance, direct experimental characterisations of the electronic structure of the S1 (21Ag-) wavefunction have remained scarce and uncertain, although advanced theory predicts it to have a rich multi-excitonic character. Here, studying an archetypal polymer, polydiacetylene, and carotenoids, we experimentally demonstrate that S1 (21Ag-) is a superposition state with strong contributions from spin-entangled pairs of triplet excitons (1(TT)). We further show that optical manipulation of the S1 (21Ag-) wavefunction using triplet absorption transitions allows selective projection of the 1(TT) component into a manifold of spatially separated triplet-pairs with lifetimes enhanced by up to one order of magnitude and whose yield is strongly dependent on the level of inter-chromophore coupling. Our results provide a unified picture of 21Ag-states in pi-conjugated materials and open new routes to exploit their dynamics in singlet fission, photobiology and for the generation of entangled (spin-1) particles for molecular quantum technologies.

physics.chem-ph↗

arXiv2021

Optical and electronic properties of colloidal CdSe Quantum Rings

Luminescent colloidal CdSe nanorings are a new type of semiconductor structure that have attracted interest due to the potential for unique physics arising from their non-trivial toroidal shape. However, the exciton properties and dynamics of these materials with complex topology are not yet well understood. Here, we use a combination of femtosecond vibrational spectroscopy, temperature-resolved photoluminescence (PL), and single particle measurements to study these materials. We find that on transformation of CdSe nanoplatelets to nanorings, by perforating the center of platelets, the emission lifetime decreases and the emission spectrum broadens due to ensemble variations in the ring size and thickness. The reduced PL quantum yield of nanorings (~10%) compared to platelets (~30%) is attributed to an enhanced coupling between: (i) excitons and CdSe LO-phonons at 200 cm-1 and (ii) negatively charged selenium-rich traps which give nanorings a high surface charge (~-50 mV). Population of these weakly emissive trap sites dominates the emission properties with an increased trap emission at low temperatures relative to excitonic emission. Our results provide a detailed picture of the nature of excitons in nanorings and the influence of phonons and surface charge in explaining the broad shape of the PL spectrum and the origin of PL quantum yield losses. Furthermore, they suggest that the excitonic properties of nanorings are not solely a consequence of the toroidal shape but are also a result of traps introduced by puncturing the platelet center.

physics.app-ph↗

arXiv2020

Operando optical tracking of single-particle ion dynamics and phase transitions in battery electrodes

Key to advancing lithium-ion battery technology, and in particular fast charging capabilities, is our ability to follow and understand the dynamic processes occurring in operating materials under realistic conditions, in real time, and on the nano- to meso-scale. Currently, operando imaging of lithium-ion dynamics requires sophisticated synchrotron X-ray or electron microscopy techniques, which do not lend themselves to high-throughput material screening. This limits rapid and rational materials improvements. Here we introduce a simple lab-based, optical interferometric scattering microscope to resolve nanoscopic lithium-ion dynamics in battery materials and apply it to follow the repeated cycling of the archetypical cathode material Li$_\textit{x}$CoO$_2$. The method allows us to visualise directly the insulator-metal, solid solution and lithium ordering phase transitions in this material. We determine rates of lithium insertion and removal at the single-particle level and identify different mechanisms that occur on charge vs. discharge. Finally, we capture the dynamic formation of domain boundaries between different crystal orientations associated with the monoclinic lattice distortion at around Li$_{0.5}$CoO$_2$. The high throughput nature of our methodology allows many particles to be sampled across the entire electrode and, moving forward, will enable exploration of the role of dislocations, morphologies and cycling rate on battery degradation. The generality of our imaging concept means that it can be applied to study any battery electrode, and more broadly, systems where the transport of ions is associated with electronic or structural changes, including nanoionic films, ionic conducting polymers, photocatalytic materials and memristors.

cond-mat.mtrl-sci↗

arXiv2020

The role of charge recombination to spin-triplet excitons in non-fullerene acceptor organic solar cells

The power conversion efficiencies (PCEs) of organic solar cells (OSCs) using non-fullerene acceptors (NFAs) have now reached 18%. However, this is still lower than inorganic solar cells, for which PCEs >20% are commonplace. A key reason is that OSCs still show low open-circuit voltages (Voc) relative to their optical band gaps, attributed to non-radiative recombination. For OSCs to compete with inorganics in efficiency, all non-radiative loss pathways must be identified and where possible, removed. Here, we show that in most NFA OSCs, the majority of charge recombination at open-circuit proceeds via formation of non-emissive NFA triplet excitons (T1); in the benchmark PM6:Y6 blend, this fraction reaches 90%, contributing 60 mV to the reduction of Voc. We develop a new design to prevent recombination via this non-radiative channel through the engineering of significant hybridisation between the NFA T1 and the spin-triplet charge transfer exciton (3CTE). We model that the rate of the back charge transfer from 3CTE to T1 can be reduced by an order of magnitude, allowing re-dissociation of the 3CTE. We then demonstrate NFA systems where T1 formation is suppressed. This work therefore provides a clear design pathway for improved OSC performance to 20% PCE and beyond.

physics.app-ph↗

arXiv2020

How Does the Symmetry of S1 Influence Exciton Transport in Conjugated Polymers?

Many optoelectronic devices based on organic materials require rapid and long-range singlet exciton transport. Key factors that control the transport of singlet excitons includes the electronic structure of the material, disorder and exciton-phonon coupling. An important parameter whose influence on exciton transport has not been explored is the symmetry of the singlet electronic state (S1). Here, we employ femtosecond transient absorption spectroscopy and microscopy to reveal the relationship between the symmetry of S1 and exciton transport in highly aligned, near-disorder free, one-dimensional conjugated polymers based on polydiacetylene.

cond-mat.mes-hall↗

arXiv2020

Mechanistic Insight to the Chemical Treatments of Monolayer Transition Metal Disulfides for Photoluminescence Enhancement

There is a growing interest in obtaining high quality monolayer transition metal disulfides (TMDSs) for optoelectronic device applications. Surface chemical treatments using a range of chemicals on monolayer TMDSs have proven effective to improve their photoluminescence (PL) yield. However, the underlying mechanism for PL enhancement by these treatments is not clear, which prevents a rational design of passivation strategies. In this work, a simple and effective approach to significantly enhance PL of TMDSs is demonstrated by using a family of cation donors, which we show to be much more effective than commonly used p-dopants which achieve PL enhancement through electron transfer. We develop a detailed mechanistic picture for the action of these cation donors and demonstrate that one of them, Li-TFSI (bistriflimide), enhances the PL of both MoS2 and WS2 to a level double that compared to the widely discussed and currently best performing super acid H-TFSI treatment. In addition, the ionic salts used in chemical treatments are compatible with a range of greener solvents and are easier to handle than super-acids, which provides the possibility of directly treating TMDSs during device fabrication. This work sets up rational selection rules for ionic chemicals to passivate TMDSs and increases the potential of TMDSs in practical optoelectronic applications.

physics.app-ph↗

arXiv2020

Ligand Directed Self-Assembly of Bulk Organic-Semiconductor/Quantum-Dot Blend Films Enables Near Quantitative Harvesting of Triplet Excitons

Singlet fission (SF), an exciton multiplication process occurring in organic semiconductors, offers a way to break the Shockley-Queisser limit in single-bandgap photovoltaics (PV). If the triplet excitons generated by SF can be transferred to inorganic quantum dots (QDs), where they radiatively recombine, SF based photon multiplication is achieved, converting a single high-energy photon into two low-energy photons. Such a SF photon multiplication film (SF-PMF) could raise the efficiency of the best Si-PV from 26.7% to 32.5%. But a precise nanoscale morphology is required within such a film consisting of the appropriate morphology for the organic phase, allowing for efficient SF, within which the QD emitters are well dispersed on a tens of nm length scale to enable efficient harvesting of the triplets. However, it has been a long-standing problem that the individual components in organic-QD blends have a tendency to aggregate and phase separate, due to a mismatch of their size, shape and surface energies. Here, we demonstrate a QD surface engineering approach using an electronically active, highly soluble semiconductor ligand that is matched to the SF material, which allows us to direct the self-assembly process yielding solution processed films with well-dispersed QDs and minimal aggregation, as characterised by X-ray and neutron scattering and electron microscopy. Steady state and time-resolved optical spectroscopy show that the films support efficient SF (190% yield) in the organic phase and quantitative triplet energy transfer across the organic-QD interface, resulting in 95% of the triplet excitons being harvested by the QDs. Our results establish the SF-PMF as a highly promising architecture to harness the SF process to enhance PV efficiencies, and also provide a highly versatile approach to overcome challenges in the blending of organic semiconductors with QDs.

cond-mat.mtrl-sci↗

arXiv2020

Directed Energy Transfer from Monolayer $WS_{2}$ to NIR Emitting PbS-CdS Quantum Dots

Heterostructures of two-dimensional (2D) transition metal dichalcogenides (TMDs) and inorganic semiconducting zero-dimensional (0D) quantum dots (QDs) offer unique charge and energy transfer pathways which could form the basis of novel optoelectronic devices. To date, most has focused on charge transfer and energy transfer from QDs to TMDs, i.e. from 0D to 2D. Here, we present a study of the energy transfer process from a 2D to 0D material, specifically exploring energy transfer from monolayer tungsten disulphide ($WS_{2}$) to near infrared (NIR) emitting lead sulphide-cadmium sulphide (PbS-CdS) QDs. The high absorption cross section of $WS_{2}$ in the visible region combined with the potentially high photoluminescence (PL) efficiency of PbS QD systems, make this an interesting donor-acceptor system that can effectively use the WS2 as an antenna and the QD as a tuneable emitter, in this case downshifting the emission energy over hundreds of meV. We study the energy transfer process using photoluminescence excitation (PLE) and PL microscopy, and show that 58% of the QD PL arises due to energy transfer from the $WS_{2}$. Time resolved photoluminescence (TRPL) microscopy studies show that the energy transfer process is faster than the intrinsic PL quenching by trap states in the $WS_{2}$, thus allowing for efficient energy transfer. Our results establish that QDs could be used as tuneable and high PL efficiency emitters to modify the emission properties of TMDs. Such TMD/QD heterostructures could have applications in light emitting technologies, artificial light harvesting systems or be used to read out the state of TMD devices optically in various logic and computing applications

physics.app-ph↗

arXiv2020

First principles modeling of exciton-polaritons in polydiacetylene chains

Exciton-polaritons in organic materials are hybrid states that result from the strong interaction of photons and the bound excitons that these materials host. Organic polaritons hold great interest for optoelectronic applications, however progress towards this end has been impeded by the lack of a first principles approach that quantifies light-matter interactions in these systems, and which would allow the formulation of molecular design rules. Here we develop such a first principles approach, quantifying light-matter interactions. We exemplify our approach by studying variants of the conjugated polymer polydiacetylene, and we show that a large polymer conjugation length is critical towards strong exciton-photon coupling, hence underlying the importance of pure structures without static disorder. By comparing to our experimental reflectivity measurements, we show that the coupling of excitons to vibrations, manifested by phonon side bands in the absorption, has a strong impact on the magnitude of light-matter coupling over a range of frequencies. Our approach opens the way towards a deeper understanding of polaritons in organic materials, and we highlight that a quantitatively accurate calculation of the exciton-photon interaction would require accounting for all sources of disorder self-consistently.

cond-mat.mtrl-sci↗

arXiv2020

The impact of exciton delocalization on exciton-vibration interactions in organic semiconductors

Organic semiconductors exhibit properties of individual molecules and extended crystals simultaneously. The strongly bound excitons they host are typically described in the molecular limit, but excitons can delocalize over many molecules, raising the question of how important the extended crystalline nature is. Using accurate Green's function based methods for the electronic structure and non-perturbative finite difference methods for exciton-vibration coupling, we describe exciton interactions with molecular and crystal degrees of freedom concurrently. We find that the degree of exciton delocalization controls these interactions, with thermally activated crystal phonons predominantly coupling to delocalized states, and molecular quantum fluctuations predominantly coupling to localized states. Based on this picture, we quantitatively predict and interpret the temperature and pressure dependence of excitonic peaks in the acene series of organic semiconductors, which we confirm experimentally, and we develop a simple experimental protocol for probing exciton delocalization. Overall, we provide a unified picture of exciton delocalization and vibrational effects in organic semiconductors, reconciling the complementary views of finite molecular clusters and periodic molecular solids.

cond-mat.mtrl-sci↗