arXiv subjects

Albert Schliesser

Publications and source records attributed to Albert Schliesser.

At least 37 records · Page 2Linked to original sources

arXiv2020

Stroboscopic quantum optomechanics

We consider an optomechanical cavity that is driven stroboscopically by a train of short pulses. By suitably choosing the inter-pulse spacing we show that ground-state cooling and mechanical squeezing can be achieved, even in the presence of mechanical dissipation and for moderate radiation-pressure interaction. We provide a full quantum-mechanical treatment of stroboscopic backaction-evading measurements, for which we give a simple analytic insight, and discuss preparation and verification of squeezed mechanical states. We further consider stroboscopic driving of a pair of non-interacting mechanical resonators coupled to a common cavity field, and show that they can be simultaneously cooled and entangled. Stroboscopic quantum optomechanics extends measurement-based quantum control of mechanical systems beyond the good-cavity limit.

quant-ph↗

arXiv2020

Membrane-based scanning force microscopy

We report the development of a scanning force microscope based on an ultra-sensitive silicon nitride membrane transducer. Our development is made possible by inverting the standard microscope geometry - in our instrument, the substrate is vibrating and the scanning tip is at rest. We present first topography images of samples placed on the membrane surface. Our measurements demonstrate that the membrane retains an excellent force sensitivity when loaded with samples and in the presence of a scanning tip. We discuss the prospects and limitations of our instrument as a quantum-limited force sensor and imaging tool.

physics.app-ph↗

arXiv2020

Soft-clamped phononic dimers for mechanical sensing and transduction

Coupled micro- and nanomechanical resonators are of significant interest within a number of areas of research, ranging from synchronisation, nonlinear dynamics and chaos, to quantum sensing and transduction. Building upon our work on soft-clamped membrane resonators, here we present a study on phononic dimers, consisting of two defects embedded in a phononic crystal membrane. These devices exhibit widely tunable (2-100 kHz) inter-defect coupling strengths, leading to delocalized hybrid modes with mechanical Qf-products > 10^14 Hz at room temperature,ensuring low thermomechanical force noise. The mode splitting exhibits a strong dependence on the dimer orientation within the crystal lattice, as well as the spatial separation between the two defects. Given the importance of dynamic range for sensing applications, we characterize the relevant mechanical nonlinearities, specifically the self- and cross-Duffing parameters, as well as self and cross-nonlinear dampings. This work establishes soft-clamped resonators with engineered spatial and spectral multi-mode structure as a versatile mechanical platform both in the classical and quantum regimes. Applications in microwave-to-optical transduction and magnetic resonance force microscopy are particularly attractive prospects.

physics.app-ph↗

arXiv2020

Entanglement between Distant Macroscopic Mechanical and Spin Systems

Entanglement is a vital property of multipartite quantum systems, characterised by the inseparability of quantum states of objects regardless of their spatial separation. Generation of entanglement between increasingly macroscopic and disparate systems is an ongoing effort in quantum science which enables hybrid quantum networks, quantum-enhanced sensing, and probing the fundamental limits of quantum theory. The disparity of hybrid systems and the vulnerability of quantum correlations have thus far hampered the generation of macroscopic hybrid entanglement. Here we demonstrate, for the first time, generation of an entangled state between the motion of a macroscopic mechanical oscillator and a collective atomic spin oscillator, as witnessed by an Einstein-Podolsky-Rosen variance below the separability limit, $0.83 \pm 0.02<1$. The mechanical oscillator is a millimeter-size dielectric membrane and the spin oscillator is an ensemble of $10^9$ atoms in a magnetic field. Light propagating through the two spatially separated systems generates entanglement due to the collective spin playing the role of an effective negative-mass reference frame and providing, under ideal circumstances, a backaction-free subspace; in the experiment, quantum backaction is suppressed by 4.6 dB. Our results pave the road towards measurement of motion beyond the standard quantum limits of sensitivity with applications in force, acceleration,and gravitational wave detection, as well as towards teleportation-based protocols in hybrid quantum networks.

quant-ph↗

arXiv2019

Entanglement of Propagating Optical Modes via a Mechanical Interface

Many applications of quantum information processing (QIP) require distribution of quantum states in networks, both within and between distant nodes. Optical quantum states are uniquely suited for this purpose, as they propagate with ultralow attenuation and are resilient to ubiquitous thermal noise. Mechanical systems are then envisioned as versatile interfaces between photons and a variety of solid-state QIP platforms. Here, we demonstrate a key step towards this vision, and generate entanglement between two propagating optical modes, by coupling them to the same, cryogenic mechanical system. The entanglement persists at room temperature, where we verify the inseparability of the bipartite state and fully characterize its logarithmic negativity by homodyne tomography. We detect, without any corrections, correlations corresponding to a logarithmic negativity of $E_\mathrm{N}=0.35$. Combined with quantum interfaces between mechanical systems and solid-state qubit processors already available or under development, this paves the way for mechanical systems enabling long-distance quantum information networking over optical fiber networks.

quant-ph↗

arXiv2019

Magnetic resonance imaging with optical preamplification and detection

Magnetic resonance (MR) imaging relies on conventional electronics that is increasingly challenged by the push for stronger magnetic fields and higher channel count. These problems can be avoided by utilizing optical technologies. As a replacement for the standard low-noise preamplifier, we have implemented a new transduction principle that upconverts an MR signal to the optical domain and imaged a phantom in a clinical 3 T scanner with signal-to-noise comparable to classical induction detection.

physics.med-ph↗

arXiv2018

Observing and Verifying the Quantum Trajectory of a Mechanical Resonator

Continuous weak measurement allows localizing open quantum systems in state space, and tracing out their quantum trajectory as they evolve in time. Efficient quantum measurement schemes have previously enabled recording quantum trajectories of microwave photon and qubit states. We apply these concepts to a macroscopic mechanical resonator, and follow the quantum trajectory of its motional state conditioned on a continuous optical measurement record. Starting with a thermal mixture, we eventually obtain coherent states of 78% purity--comparable to a displaced thermal state of occupation 0.14. We introduce a retrodictive measurement protocol to directly verify state purity along the trajectory, and furthermore observe state collapse and decoherence. This opens the door to measurement-based creation of advanced quantum states, and potential tests of gravitational decoherence models.

quant-ph↗

arXiv2018

Continuous Force and Displacement Measurement Below the Standard Quantum Limit

Quantum mechanics dictates that the precision of physical measurements must be subject to certain constraints. In the case of inteferometric displacement measurements, these restrictions impose a 'standard quantum limit' (SQL), which optimally balances the precision of a measurement with its unwanted backaction. To go beyond this limit, one must devise more sophisticated measurement techniques, which either 'evade' the backaction of the measurement, or achieve clever cancellation of the unwanted noise at the detector. In the half-century since the SQL was established, systems ranging from LIGO to ultracold atoms and nanomechanical devices have pushed displacement measurements towards this limit, and a variety of sub-SQL techniques have been tested in proof-of-principle experiments. However, to-date, no experimental system has successfully demonstrated an interferometric displacement measurement with sensitivity (including all relevant noise sources: thermal, backaction, and imprecision) below the SQL. Here, we exploit strong quantum correlations in an ultracoherent optomechanical system to demonstrate off-resonant force and displacement sensitivity reaching 1.5dB below the SQL. This achieves an outstanding goal in mechanical quantum sensing, and further enhances the prospects of using such devices for state-of-the-art force sensing applications.

quant-ph↗

arXiv2018

Measurement-based quantum control of mechanical motion

Controlling a quantum system based on the observation of its dynamics is inevitably complicated by the backaction of the measurement process. Efficient measurements, however, maximize the amount of information gained per disturbance incurred. Real-time feedback then enables both canceling the measurement's backaction and controlling the evolution of the quantum state. While such measurement-based quantum control has been demonstrated in the clean settings of cavity and circuit quantum electrodynamics, its application to motional degrees of freedom has remained elusive. Here we show measurement-based quantum control of the motion of a millimetre-sized membrane resonator. An optomechanical transducer resolves the zero-point motion of the soft-clamped resonator in a fraction of its millisecond coherence time, with an overall measurement efficiency close to unity. We use this position record to feedback-cool a resonator mode to its quantum ground state (residual thermal occupation n = 0.29 +- 0.03), 9 dB below the quantum backaction limit of sideband cooling, and six orders of magnitude below the equilibrium occupation of its thermal environment. This realizes a long-standing goal in the field, and adds position and momentum to the degrees of freedom amenable to measurement-based quantum control, with potential applications in quantum information processing and gravitational wave detectors.

quant-ph↗

arXiv2018

Electro-optomechanical equivalent circuits for quantum transduction

Using the techniques of optomechanics, a high-$Q$ mechanical oscillator may serve as a link between electromagnetic modes of vastly different frequencies. This approach has successfully been exploited for the frequency conversion of classical signals and has the potential of performing quantum state transfer between superconducting circuitry and a traveling optical signal. Such transducers are often operated in a linear regime, where the hybrid system can be described using linear response theory based on the Heisenberg-Langevin equations. While mathematically straightforward to solve, this approach yields little intuition about the dynamics of the hybrid system to aid the optimization of the transducer. As an analysis and design tool for such electro-optomechanical transducers, we introduce an equivalent circuit formalism, where the entire transducer is represented by an electrical circuit. Thereby we integrate the transduction functionality of optomechanical systems into the toolbox of electrical engineering allowing the use of its well-established design techniques. This unifying impedance description can be applied both for static (DC) and harmonically varying (AC) drive fields, accommodates arbitrary linear circuits, and is not restricted to the resolved-sideband regime. Furthermore, by establishing the quantized input-output formalism for the equivalent circuit, we obtain the scattering matrix for linear transducers using circuit analysis, and thereby have a complete quantum mechanical characterization of the transducer. Hence, this mapping of the entire transducer to the language of electrical engineering both sheds light on how the transducer performs and can at the same time be used to optimize its performance by aiding the design of a suitable electrical circuit.

quant-ph↗

arXiv2018

Nano-Opto-Electro-Mechanical Systems

A new class of hybrid systems that couple optical, electrical and mechanical degrees of freedom in nanoscale devices is under development in laboratories worldwide. These nano-opto-electro-mechanical systems (NOEMS) offer unprecedented opportunities to dynamically control the flow of light in nanophotonic structures, at high speed and low power consumption. Drawing on conceptual and technological advances from cavity optomechanics, they also bear the potential for highly efficient, low-noise transducers between microwave and optical signals, both in the classical and quantum domains. This Progress Article discusses the fundamental physical limits of NOEMS, reviews the recent progress in their implementation, and suggests potential avenues for further developments in this field.

physics.optics↗

arXiv2017

Figures of merit for quantum transducers

Recent technical advances have sparked renewed interest in physical systems that couple simultaneously to different parts of the electromagnetic spectrum, thus enabling transduction of signals between vastly different frequencies at the level of single photons. Such hybrid systems have demonstrated frequency conversion of classical signals and have the potential of enabling quantum state transfer, e.g., between superconducting circuits and traveling optical signals. This article describes a simple approach for the theoretical characterization of the performance of quantum transducers. Given that, in practice, one cannot attain ideal one-to-one quantum conversion, we explore how well the transducer performs in scenarios ranging from classical signal detection to applications for quantum information processing. While the performance of the transducer depends on the particular application in which it enters, we show that the performance can be characterized by defining two simple parameters: the signal transfer efficiency $η$ and the added noise $N$.

quant-ph↗

arXiv2017

Quantum back action evading measurement of motion in a negative mass reference frame

Quantum mechanics dictates that a continuous measurement of the position of an object imposes a random back action perturbation on its momentum. This randomness translates with time into position uncertainty, thus leading to the well known uncertainty on the measurement of motion. Here we demonstrate that the quantum back action on a macroscopic mechanical oscillator measured in the reference frame of an atomic spin oscillator can be evaded. The collective quantum measurement on this novel hybrid system of two distant and disparate oscillators is performed with light. The mechanical oscillator is a drum mode of a millimeter size dielectric membrane and the spin oscillator is an atomic ensemble in a magnetic field. The spin oriented along the field corresponds to an energetically inverted spin population and realizes an effective negative mass oscillator, while the opposite orientation corresponds to a positive mass oscillator. The quantum back action is evaded in the negative mass setting and is enhanced in the positive mass case. The hybrid quantum system presented here paves the road to entanglement generation and distant quantum communication between mechanical and spin systems and to sensing of force, motion and gravity beyond the standard quantum limit.

quant-ph↗

arXiv2017

Polarimetric analysis of stress anisotropy in nanomechanical silicon nitride resonators

We realise a circular gray-field polariscope to image stress-induced birefringence in thin (submicron thick) silicon nitride (SiN) membranes and strings. This enables quantitative mapping of the orientation of principal stresses and stress anisotropy, complementary to, and in agreement with, finite element modeling (FEM). Furthermore, using a sample with a well known stress anisotropy, we extract a new value for the photoelastic (Brewster) coefficient of silicon nitride, $C \approx (3.4~\pm~0.1)\times~10^{-6}~\mathrm{MPa}^{-1}$. We explore possible applications of the method to analyse and quality-control stressed membranes with phononic crystal patterns

cond-mat.mes-hall↗

arXiv2016

Ultra-coherent nanomechanical resonators via soft clamping and dissipation dilution

The small mass and high coherence of nanomechanical resonators render them the ultimate force probe, with applications ranging from biosensing and magnetic resonance force microscopy, to quantum optomechanics. A notorious challenge in these experiments is thermomechanical noise related to dissipation through internal or external loss channels. Here, we introduce a novel approach to defining nanomechanical modes, which simultaneously provides strong spatial confinement, full isolation from the substrate, and dilution of the resonator material's intrinsic dissipation by five orders of magnitude. It is based on a phononic bandgap structure that localises the mode, without imposing the boundary conditions of a rigid clamp. The reduced curvature in the highly tensioned silicon nitride resonator enables mechanical $Q>10^{8}$ at $ 1 \,\mathrm{MHz}$, yielding the highest mechanical $Qf$-products ($>10^{14}\,\mathrm{Hz}$) yet reported at room temperature. The corresponding coherence times approach those of optically trapped dielectric particles. Extrapolation to $4{.}2$ Kelvin predicts $\sim$quanta/ms heating rates, similar to trapped ions.

quant-ph↗

arXiv2016

Multimode optomechanical system in the quantum regime

We realise a simple and robust optomechanical system with a multitude of long-lived ($Q>10^7$) mechanical modes in a phononic-bandgap shielded membrane resonator. An optical mode of a compact Fabry-Perot resonator detects these modes' motion with a measurement rate ($96~\mathrm{kHz}$) that exceeds the mechanical decoherence rates already at moderate cryogenic temperatures ($10\,\mathrm{K}$). Reaching this quantum regime entails, i.~a., quantum measurement backaction exceeding thermal forces, and thus detectable optomechanical quantum correlations. In particular, we observe ponderomotive squeezing of the output light mediated by a multitude of mechanical resonator modes, with quantum noise suppression up to -2.4 dB (-3.6 dB if corrected for detection losses) and bandwidths $\lesssim 90\,\mathrm{ kHz}$. The multi-mode nature of the employed membrane and Fabry-Perot resonators lends itself to hybrid entanglement schemes involving multiple electromagnetic, mechanical, and spin degrees of freedom.

quant-ph↗

arXiv2014

Determination of effective mechanical properties of a double-layer beam by means of a nano-electromechanical transducer

We investigate the mechanical properties of a doubly-clamped, double-layer nanobeam embedded into an electromechanical system. The nanobeam consists of a highly pre-stressed silicon nitride and a superconducting niobium layer. By measuring the mechanical displacement spectral density both in the linear and the nonlinear Duffing regime, we determine the pre-stress and the effective Young's modulus of the nanobeam. An analytical double-layer model quantitatively corroborates the measured values. This suggests that this model can be used to design mechanical multilayer systems for electro- and optomechanical devices, including materials controllable by external parameters such as piezoelectric, magnetrostrictive, or in more general multiferroic materials.

cond-mat.mes-hall↗

arXiv2013

Demonstration of suppressed phonon tunneling losses in phononic bandgap shielded membrane resonators for high-Q optomechanics

Dielectric membranes with exceptional mechanical and optical properties present one of the most promising platforms in quantum opto-mechanics. The performance of stressed silicon nitride nanomembranes as mechanical resonators notoriously depends on how their frame is clamped to the sample mount, which in practice usually necessitates delicate, and difficult-to-reproduce mounting solutions. Here, we demonstrate that a phononic bandgap shield integrated in the membrane's silicon frame eliminates this dependence, by suppressing dissipation through phonon tunneling. We dry-etch the membrane's frame so that it assumes the form of a $\mathrm{cm}$-sized bridge featuring a 1-dimensional periodic pattern, whose phononic density of states is tailored to exhibit one, or several, full band gaps around the membrane's high-$Q$ modes in the MHz-range. We quantify the effectiveness of this phononic bandgap shield by optical interferometry measuring both the suppressed transmission of vibrations, as well as the influence of frame clamping conditions on the membrane modes. We find suppressions up to $40~\mathrm{dB}$ and, for three different realized phononic structures, consistently observe significant suppression of the dependence of the membrane's modes on sample clamping - if the mode's frequency lies in the bandgap. As a result, we achieve membrane mode quality factors of $5\times 10^{6}$ with samples that are tightly bolted to the $8~\mathrm{K}$-cold finger of a cryostat. $Q\times f$-products of $6\times 10^{12}~\mathrm{Hz}$ at $300~\mathrm{K}$ and $14\times 10^{12}~\mathrm{Hz}$ at $8~\mathrm{K}$ are observed, satisfying one of the main requirements for optical cooling of mechanical vibrations to their quantum ground-state.

cond-mat.mes-hall↗