arXiv subjects

Alexander Eichler

Publications and source records attributed to Alexander Eichler.

At least 37 records · Page 2Linked to original sources

arXiv2023

Nanoscale magnets embedded in a microstrip

Nanoscale magnetic resonance imaging (NanoMRI) is an active area of applied research with potential use in structural biology and quantum engineering. The success of this technological vision hinges on improving the instrument's sensitivity and functionality. A particular challenge is the optimization of the magnetic field gradient required for spatial encoding, and of the radio-frequency field used for spin control, in analogy to the components used in clinical MRI. In this work, we present the fabrication and characterization of a magnet-in-microstrip device that yields a compact form factor for both elements. We find that our design leads to a number of advantages, among them a fourfold increase of the magnetic field gradient compared to those achieved with traditional fabrication methods. Our results can be useful for boosting the efficiency of a variety of different experimental arrangements and detection principles in the field of NanoMRI.

physics.app-ph↗

arXiv2023

Near-resonant nuclear spin detection with high-frequency mechanical resonators

Mechanical resonators operating in the high-frequency regime have become a versatile platform for fundamental and applied quantum research. Their exceptional properties, such as low mass and high quality factor, make them also very appealing for force sensing experiments. In this Letter, we propose a method for detecting and ultimately controlling nuclear spins by directly coupling them to high-frequency resonators via a magnetic field gradient. Dynamical backaction between the sensor and an ensemble of nuclear spins produces a shift in the sensor's resonance frequency, which can be measured to probe the spin ensemble. Based on analytical as well as numerical results, we predict that the method will allow nanoscale magnetic resonance imaging with a range of realistic devices. At the same time, this interaction paves the way for new manipulation techniques, similar to those employed in cavity optomechanics, enriching both the sensor's and the spin ensemble's features.

cond-mat.mes-hall↗

arXiv2023

A biased Ising model using two coupled Kerr parametric oscillators with external force

Networks of coupled Kerr parametric oscillators (KPOs) are a leading physical platform for analog solving of complex optimization problems. These systems are colloquially known as ``Ising machines''. We experimentally and theoretically study such a network under the influence of an external force. The force breaks the collective phase-parity symmetry of the system and competes with the intrinsic coupling in ordering the network configuration, similar to how a magnetic field biases an interacting spin ensemble. Specifically, we demonstrate how the force can be used to control the system, and highlight the crucial role of the phase and symmetry of the force. Our work thereby provides a method to create Ising machines with arbitrary bias, extending even to exotic cases that are impossible to engineer in real spin systems.

physics.class-ph↗

arXiv2023

Proliferation of unstable states and their impact on stochastic out-of-equilibrium dynamics

Networks of nonlinear parametric resonators are promising candidates as Ising machines for annealing and optimization. These many-body out-of-equilibrium systems host complex phase diagrams of coexisting stationary states. The plethora of states manifest via a series of bifurcations, including bifurcations that proliferate purely unstable solutions, which we term ``ghost bifurcations''. Here, we demonstrate that the latter take a fundamental role in the stochastic dynamics of the system in the presence of noise. Specifically, they determine the switching paths and the switching rates between stable solutions. We demonstrate experimentally the impact of ghost bifurcations on the noise-activated switching dynamics in a network of two coupled parametric resonators.

physics.class-ph↗

arXiv2023

The role of fluctuations in quantum and classical time crystals

Discrete time crystals (DTCs) are a many-body state of matter whose dynamics are slower than the forces acting on it. The same is true for classical systems with period-doubling bifurcations. Hence, the question naturally arises what differentiates classical from quantum DTCs. Here, we analyze a variant of the Bose-Hubbard model, which describes a plethora of physical phenomena and has both a classical and a quantum time-crystalline limit. We study the role of fluctuations on the stability of the system and find no distinction between quantum and classical DTCs. This allows us to probe the fluctuations in an experiment using two strongly coupled parametric resonators subject to classical noise.

quant-ph↗

arXiv2023

Deterministic and stochastic sampling of two coupled Kerr parametric oscillators

The vision of building computational hardware for problem optimization has spurred large efforts in the physics community. In particular, networks of Kerr parametric oscillators (KPOs) are envisioned as simulators for finding the ground states of Ising Hamiltonians. It was shown, however, that KPO networks can feature large numbers of unexpected solutions that are difficult to sample with the existing deterministic (i.e., adiabatic) protocols. In this work, we experimentally realize a system of two classical coupled KPOs, and we find good agreement with the predicted mapping to Ising states. We then introduce a protocol based on stochastic sampling of the system, and we show how the resulting probability distribution can be used to identify the ground state of the corresponding Ising Hamiltonian. This method is akin to a Monte Carlo sampling of multiple out-of-equilibrium stationary states and is less prone to become trapped in local minima than deterministic protocols.

cond-mat.mes-hall↗

arXiv2022

Nanomechanical Resonators: Toward Atomic Scale

The quest for realizing and manipulating ever smaller man-made movable structures and dynamical machines has spurred tremendous endeavors, led to important discoveries, and inspired researchers to venture to new grounds. Scientific feats and technological milestones of miniaturization of mechanical structures have been widely accomplished by advances in machining and sculpturing ever shrinking features out of bulk materials such as silicon. With the flourishing multidisciplinary field of low-dimensional nanomaterials, including one-dimensional (1D) nanowires/nanotubes, and two-dimensional (2D) atomic layers such as graphene/phosphorene, growing interests and sustained efforts have been devoted to creating mechanical devices toward the ultimate limit of miniaturization--genuinely down to the molecular or even atomic scale. These ultrasmall movable structures, particularly nanomechanical resonators that exploit the vibratory motion in these 1D and 2D nano-to-atomic-scale structures, offer exceptional device-level attributes, such as ultralow mass, ultrawide frequency tuning range, broad dynamic range, and ultralow power consumption, thus holding strong promises for both fundamental studies and engineering applications. In this Review, we offer a comprehensive overview and summary of this vibrant field, present the state-of-the-art devices and evaluate their specifications and performance, outline important achievements, and postulate future directions for studying these miniscule yet intriguing molecular-scale machines.

cond-mat.mes-hall↗

arXiv2022

Extracting the lifetime of a synthetic two-level system

The Kerr Parametric Oscillator (KPO) is a nonlinear resonator system that is often described as a synthetic two-level system. In the presence of noise, the system switches between two states via a fluctuating trajectory in phase space, instead of following a straight path. The presence of such fluctuating trajectories makes it hard to establish a precise count or even a useful definition, of the "lifetime" of the state. Addressing this issue, we compare several rate counting methods that allow to estimate a lifetime for the levels. In particular, we establish that a peak in the Allan variance of fluctuations can also be used to determine the levels' lifetime. Our work provides a basis for characterizing KPO networks for simulated annealing where an accurate determination of the state lifetime is of fundamental importance.

cond-mat.mes-hall↗

arXiv2022

Soft-clamped silicon nitride string resonators at millikelvin temperatures

We demonstrate that soft-clamped silicon nitride strings with large aspect ratio can be operated at \si{\milli\kelvin} temperatures. The quality factors ($Q$) of two measured devices show consistent dependency on the cryostat temperature, with soft-clamped mechanical modes reaching $Q > 10^9$ at $46~\mathrm{mK}$. For low optical readout power, $Q$ is found to saturate, indicating good thermalization between the sample and the stage it is mounted on. Our best device exhibits a force sensitivity of $9.6~\mathrm{zN}/\sqrt{\mathrm{Hz}}$ and a thermal decoherence time of $0.38~\mathrm{s}$ which bode well for future applications such as nanomechanical force sensing and beyond.

cond-mat.mes-hall↗

arXiv2022

Ultra-High Q Nanomechanical Resonators for Force Sensing

Nanomechanical resonators with ultra-high quality factors have become a central element in fundamental research, enabling measurements below the standard quantum limit and the preparation of long-lived quantum states. Here, I propose that such resonators will allow the detection of electron and nuclear spins with high spatial resolution, paving the way to future nanoscale magnetic resonance imaging instruments. The article lists the challenges that must be overcome before this vision can become reality, and indicates potential solutions.

physics.app-ph↗

arXiv2022

Force-detected Magnetic Resonance Imaging of Influenza Viruses in the Overcoupled Sensor Regime

Long and thin scanning force cantilevers are sensitive to small forces, but also vulnerable to detrimental non-contact interactions. Here we present an experiment with a cantilever whose spring constant and static deflection are dominated by the interaction between the tip and the surface, a regime that we refer to as ``overcoupled''. The interactions are an obstacle for ultrasensitive measurements like nanoscale magnetic resonance imaging (nanoMRI). We discuss several strategies to overcome the challenges presented by the overcoupling, and demonstrate proton nanoMRI measurements of individual influenza virus particles.

cond-mat.mes-hall↗

arXiv2022

Ising machines with strong bilinear coupling

Networks of coupled parametric resonators (parametrons) hold promise for parallel computing architectures. En route to realizing complex networks, we report an experimental and theoretical analysis of two coupled parametrons. In contrast to previous studies, we explore the case of strong bilinear coupling between the parametrons, as well as the role of detuning. We show that the system can still operate as an Ising machine in this regime, even though careful calibration is necessary to ensure that the correct solution space is available. Apart from the formation of split normal modes, new states of mixed symmetry are generated. Furthermore, we predict that systems with $N>2$ parametrons will undergo multiple phase transitions before arriving at a regime that can be equivalent to the Ising problem.

cond-mat.mes-hall↗

arXiv2021

Strong parametric coupling between two ultra-coherent membrane modes

We demonstrate parametric coupling between two modes of a silicon nitride membrane. We achieve the coupling by applying an oscillating voltage to a sharp metal tip that approaches the membrane surface to within a few 100 nm. When the voltage oscillation frequency is equal to the mode frequency difference, the modes exchange energy periodically and much faster than their free energy decay rate. This flexible method can potentially be useful for rapid state control and transfer between modes, and is an important step towards parametric spin sensing experiments with membrane resonators.

cond-mat.mes-hall↗

arXiv2021

Spatially resolved surface dissipation over metal and dielectric substrates

We report spatially resolved measurements of static and fluctuating electric fields over conductive (Au) and non-conductive (SiO2) surfaces. Using an ultrasensitive `nanoladder' cantilever probe to scan over these surfaces at distances of a few tens of nanometers, we record changes in the probe resonance frequency and damping that we associate with static and fluctuating fields, respectively. We find that the two quantities are spatially correlated and of similar magnitude for the two materials. We quantitatively describe the observed effects on the basis of trapped surface charges and dielectric fluctuations in an adsorbate layer. Our results provide direct, spatial evidence for surface dissipation in adsorbates that affects nanomechanical sensors, trapped ions, superconducting resonators, and color centers in diamond.

cond-mat.mes-hall↗

arXiv2020

Membrane-based scanning force microscopy

We report the development of a scanning force microscope based on an ultra-sensitive silicon nitride membrane transducer. Our development is made possible by inverting the standard microscope geometry - in our instrument, the substrate is vibrating and the scanning tip is at rest. We present first topography images of samples placed on the membrane surface. Our measurements demonstrate that the membrane retains an excellent force sensitivity when loaded with samples and in the presence of a scanning tip. We discuss the prospects and limitations of our instrument as a quantum-limited force sensor and imaging tool.

physics.app-ph↗

arXiv2019

Rapid flipping of parametric phase states

Since the invention of the solid-state transistor, the overwhelming majority of computers followed the von Neumann architecture that strictly separates logic operations and memory. Today, there is a revived interest in alternative computation models accompanied by the necessity to develop corresponding hardware architectures. The Ising machine, for example, is a variant of the celebrated Hopfield network based on the Ising model. It can be realized with artifcial spins such as the `parametron' that arises in driven nonlinear resonators. The parametron encodes binary information in the phase state of its oscillation. It enables, in principle, logic operations without energy transfer and the corresponding speed limitations. In this work, we experimentally demonstrate flipping of parametron phase states on a timescale of an oscillation period, much faster than the ringdown time τthat is often (erroneously) deemed a fundamental limit for resonator operations. Our work establishes a new paradigm for resonator-based logic architectures.

physics.app-ph↗

arXiv2019

Classical many-body time crystals

Discrete time crystals are a many-body state of matter where the extensive system's dynamics are slower than the forces acting on it. Nowadays, there is a growing debate regarding the specific properties required to demonstrate such a many-body state, alongside several experimental realizations. In this work, we provide a simple and pedagogical framework by which to obtain many-body time crystals using parametrically coupled resonators. In our analysis, we use classical period-doubling bifurcation theory and present a clear distinction between single-mode time-translation symmetry breaking and a situation where an extensive number of degrees of freedom undergo the transition. We experimentally demonstrate this paradigm using coupled mechanical oscillators, thus providing a clear route for time crystals realizations in real materials.

physics.class-ph↗

arXiv2019

GHz nanomechanical resonator in an ultraclean suspended graphene p-n junction

We demonstrate high-frequency mechanical resonators in ballistic graphene p-n junctions. Fully suspended graphene devices with two bottom gates exhibit ballistic bipolar behavior after current annealing. We determine the graphene mass density and built-in tension for different current annealing steps by comparing the measured mechanical resonant response to a simplified membrane model. We consistently find that after the last annealing step the mass density compares well with the expected density of pure graphene. In a graphene membrane with high built-in tension, but still of macroscopic size with dimensions 3 $\times$ 1 $μm^{2}$, a record resonance frequency of 1.17 GHz is observed after the final current annealing step. We further compare the resonance response measured in the unipolar with the one in the bipolar regime. Remarkably, the resonant signals are strongly enhanced in the bipolar regime. This enhancement is caused in part by the Fabry-Perot resonances that appear in the bipolar regime and possibly also by the photothermoelectric effect that can be very pronounced in graphene p-n junctions under microwave irradiation.

cond-mat.mes-hall↗