arXiv subjects

Alexander Eichler

Publications and source records attributed to Alexander Eichler.

At least 19 recordsLinked to original sources

arXiv2026

Activated switching between coexisting limit cycles

Noise-activated switching between coexisting stable states is a fundamental mechanism underlying stochastic dynamics in systems ranging from chemical reactions to neural networks. While this phenomenon is well understood for stationary attractors, it remains largely unexplored for limit cycles, whose periodic motion cannot be described by a static potential landscape. Here we experimentally demonstrate activated switching between two coexisting limit-cycle attractors in a driven nonlinear system of coupled resonators. Specifically, we introduce controlled fluctuations to directly observe the rare stochastic transitions between two limit cycles and measure their dependence on noise intensity and driving strength. The measured switching rates are well described by a large-deviation theory, which replaces the conventional activation barrier by the action along the most probable transition path. Our results extend the concept of activated dynamics from stationary to limit-cycle attractors and establish a framework for modeling stochastic transitions between limit cycles in driven-dissipative systems.

math.DS↗

arXiv2026

Determination of the intrinsic mechanical quality factor in high-stress silicon nitride resonators

Recent advances in silicon nitride nanomechanical resonators have pushed mechanical quality factors to ultra-high values by combining stress-induced dissipation dilution with mode-shape engineering. Neither mechanism alters the intrinsic quality factor $Q_{\mathrm{intr}}$. Targeting the intrinsic loss itself therefore remains an untapped route to even higher $Q$. Doing so first requires reliable quantification of $Q_{\mathrm{intr}}$, which has proven challenging. Here we present a robust methodology that quantifies $Q_{\mathrm{intr}}$ by combining automated mode identification with systematic ringdown measurements over a large number of mechanical modes. Applied to high-stress silicon nitride membranes, it reveals a systematic dependence of $Q_{\mathrm{intr}}$ on thickness that cannot be described using established models, particularly in the ultra-thin limit. We account for this trend with a phenomenological model that incorporates a thickness-dependent loss channel. Together, our method and model open a route toward a microscopic understanding of intrinsic dissipation and toward directly mitigating its loss channels.

physics.app-ph↗

arXiv2026

Nonequilibrium Kramers Turnover in a Kerr Parametric Oscillator

Activation processes govern noise-induced switching between long-lived states. In an equilibrium double well, the thermally activated switching rate exhibits a prefactor with a nonmonotonic dependence on environmental coupling, a foundational crossover known as Kramers turnover. Here, we demonstrate a Kramers turnover analogue in a Kerr parametric oscillator, a driven-dissipative nonlinear system featuring two stable phase states. First, we analytically establish turnover physics in this out-of-equilibrium setting. There, the strong physical correlation between the activation barrier and intrinsic damping fundamentally obscures the underlying turnover physics. To overcome this limitation, we rescale the rotating-frame dynamics and introduce a tunable effective friction controlled entirely by the parametric drive. This rescaling comes at the cost of a concurrent rescaling of the effective temperature. Exploiting this simultaneous scaling, we leverage the effective temperature to extract the turnover directly from temperature-dependent observations. Subsequently, measuring noise-induced phase slips in a micro-electromechanical device, we observe a distinct crossover in the prefactor's temperature dependence. Our results unambiguously isolate the out-of-equilibrium turnover regime and highlight that the competition between dissipation and fluctuations profoundly shapes activation dynamics also beyond equilibrium.

cond-mat.mes-hall↗

arXiv2025

From Cantilevers to Membranes: Advanced Scanning Protocols for Magnetic Resonance Force Microscopy

Magnetic Resonance Force Microscopy (MRFM) enables three-dimensional imaging of nuclear spin densities in nanoscale objects. Based on numerical simulations, we evaluate the performance of strained SiN resonators as force sensors and show that their out-of-plane oscillation direction improves the quality of the reconstructed sample. We further introduce a multislice, compressed-sensing scan protocol that maximizes the information obtained for a given measurement time. Our simulations predict that these new scanning protocols and optimized algorithms can shorten the total acquisition time by up to two orders of magnitude while maintaining the reconstruction fidelity. Our results demonstrate that combining advanced scanning protocols with state-of-the-art resonators is a promising path toward high-resolution MRFM for volumetric imaging of biological nanostructures.

physics.app-ph↗

arXiv2025

Dynamical Phase Transitions Across Slow and Fast Regimes in a Two-Tone Driven Duffing Resonator

The response of nonlinear resonators to multifrequency driving reveals rich dynamics beyond conventional single-tone theory. We study a Duffing resonator under bichromatic excitation and identify a competition between the two drives, governed by their detuning and relative amplitudes. In the slow-beating regime, where the tones are closely spaced, the secondary drive acts as a modulation that induces dynamical phase transitions between coexisting stationary states. We introduce the cycle-averaged amplitude as an order parameter and map the resulting phase diagram as a function of the drive detuning and amplitude ratio, capturing the pronounced asymmetry observed for blue versus red detuning in experiment. We devise a model to link the onset of these transitions to the resonance properties around the nonlinear stationary mode of the system. Our results provide a framework for controlling driven nonlinear systems, enabling state manipulation, and sensing in nanomechanical, optical, and superconducting circuit platforms.

cond-mat.mes-hall↗

arXiv2025

Near-resonant nuclear spin detection with megahertz mechanical resonators

Mechanical resonators operating in the megahertz range have become a versatile platform for fundamental and applied quantum research. Their exceptional properties, such as low mass and high quality factor, make them also appealing for force sensing experiments. In this work, we propose a method for detecting, and ultimately controlling, nuclear spins by coupling them to megahertz resonators via a magnetic field gradient. Dynamical backaction between the sensor and an ensemble of $N$ nuclear spins produces a shift in the sensor's resonance frequency. The mean frequency shift due to the Boltzmann polarization is challenging to measure in nanoscale sample volumes. Here, we show that the fluctuating polarization of the spin ensemble results in a measurable increase of the resonator's frequency variance. On the basis of analytical as well as numerical results, we predict that the variance measurement will allow single nuclear spin detection with existing resonator devices.

cond-mat.mes-hall↗

arXiv2025

On-Chip Frequency Noise Cancellation in Nanomechanical Resonators using Cavity Optomechanics

Understanding and minimizing the sources of frequency noise in nanomechanical resonators is crucial for many sensing applications. In this work, we report an ultracoherent perimeter-mode nanomechanical resonator co-integrated with an on-chip optical cavity. This device combines low thermomechanical force noise and low detector noise, allowing us to study its intrinsic frequency fluctuations in detail. We find that the fluctuations of two mechanical modes are strongly correlated. Moreover, we demonstrate the generation of a signal at the frequency difference between the two modes directly on chip via nonlinear optomechanical transduction. This `difference signal' has vastly reduced intrinsic frequency fluctuations and can be used for frequency tracking with high precision, as we establish in a proof-of-principle experiment.

physics.optics↗

arXiv2025

A network of parametrically driven silicon nitride mechanical membranes

Networks of nonlinear resonators offer a promising platform for analog computing and the emulation of complex systems. However, realizing such networks remains challenging, as it requires resonators with high quality factors, individual frequency tunability, and strong inter-resonator coupling. In this work, we present a system that meets all these criteria. Our system is based on metallized silicon nitride membranes that are coupled via their common substrate and controlled capacitively via electrodes. We demonstrate individual frequency tuning and strong parametric driving of each membrane. Notably, we tune membrane frequencies through avoided crossings and demonstrate tunability of the coupled membrane's parametric response. This platform provides a scalable and controllable setting for exploring collective phenomena, dynamical phase transitions, nonlinear topology, and analog computing.

cond-mat.mes-hall↗

arXiv2025

Three Strongly Coupled Kerr Parametric Oscillators Forming a Boltzmann Machine

Coupled Kerr parametric oscillators (KPOs) are a promising resource for classical and quantum analog computation, for example to find the ground state of Ising Hamiltonians. Yet, the state space of strongly coupled KPO networks is very involved. As such, their phase diagram sometimes features either too few or too many states, including some that cannot be mapped to Ising spin configurations. This complexity makes it challenging to find and meet the conditions under which an analog optimization algorithm can be successful. Here, we demonstrate how to use three strongly coupled KPOs as a simulator for an Ising Hamiltonian, and estimate its ground state using a Boltzmann sampling measurement. While fully classical, our work is directly relevant for quantum systems operating on coherent states.

physics.class-ph↗

arXiv2025

Symmetry breaking of large-amplitude parametric oscillations in few-layer graphene nanomechanical resonators

Graphene nanomechanical resonators are well suited for the study of parametric oscillations. Their large frequency tunability and their pronounced nonlinearities enable an efficient modulation of their resonant frequencies. Here, we present measurements of the response of few-layer graphene nanomechanical resonators, each driven by a large parametric pump at frequency $2\omega$ and a weak external drive at $\omega$, where $\omega$ is set near the mechanical resonant frequency $\omega_0$. The pump actuates the resonator beyond the threshold for large-amplitude parametric oscillations, while the drive breaks the symmetry between the parametric phase states. By increasing and decreasing a gate voltage to detune $\omega_0$ in the presence of the pump and the drive, we observe a double hysteresis in the response. The double hysteresis reveals the existence of two possible large-amplitude vibrational states whose phase difference is nearly $\pi$ radians. We deterministically prepare the resonator in either one of these states by cycling the gate voltage. We measure the stationary occupation probabilities of the two states in the presence of a white Gaussian force noise, and find that they strongly depend on the amplitude and on the phase of the external drive. The phase states of parametric oscillations with broken amplitude symmetry can be mapped to biased bi-modal degrees of freedom, such as Ising spins in an external magnetic field. Therefore, they hold promise as units of binary information.

cond-mat.mes-hall↗

arXiv2024

Differential Magnetic Force Microscopy with a Switchable Tip

The separation of physical forces acting on the tip of a magnetic force microscope (MFM) is essential for correct magnetic imaging. Electrostatic forces can be modulated by varying the tip-sample potential and minimized to map the local Kelvin potential. However, distinguishing magnetic forces from van der Waals forces typically requires two measurements with opposite tip magnetizations under otherwise identical measurement conditions. Here, we present an inverted magnetic force microscope where the sample is mounted on a flat cantilever for force sensing, and the magnetic tip is attached to a miniaturized electromagnet that periodically flips the tip magnetization. This setup enables the extraction of magnetic tip-sample interactions from the sidebands occurring at the switching rate in the cantilever oscillation spectrum. Our method achieves the separation of magnetic signals from other force contributions in a single-scan mode. Future iterations of this setup may incorporate membrane, trampoline, or string resonators with ultra-high quality factors, potentially improving measurement sensitivity by up to three orders of magnitude compared to the state-of-the-art MFM systems using cantilevers.

physics.app-ph↗

arXiv2024

Slow and fast topological dynamical phase transitions in a Duffing resonator driven by two detuned tones

The combination of a strong pump and a weak probe has been widely applied to investigate both optical and nanomechanical devices. Such pump-probe measurements allows for the exploration of nonlinear dynamics, driven by the large pump tone, by measuring the system response to a probe tone. In contrast, here we report on the dynamics of a mechanical Duffing resonator driven with a combination of two large tones at different frequencies. Our results indicate the presence of various distinct regimes with very different dynamics. We systematically investigate the impact of the relative strength and detuning between the two drives on the dynamical response. This provides an illustrative example of dynamical phase transitions in out-of-equilibrium systems.

cond-mat.mes-hall↗

arXiv2024

Vibrational Squeezing via Spin Inversion Pulses

Magnetic Resonance Force Microscopy (MRFM) describes a range of approaches to detect nuclear spins with mechanical sensors. MRFM has the potential to enable magnetic resonance imaging (MRI) with near-atomic spatial resolution, opening up exciting possibilities in solid state and biological research. In many cases, the spin-mechanics coupling in MRFM is engineered with the help of periodic radio-frequency pulses. In this paper, we report that such pulses can result in unwanted parametric amplification of the mechanical vibrations, causing misinterpretation of the measured signal. We show how the parametric effect can be cancelled by auxiliary radio-frequency pulses or by appropriate post-correction after careful calibration. Future MRFM measurements may even make use of the parametric amplification to reduce the impact of amplifier noise

physics.app-ph↗

arXiv2024

Topological classification of driven-dissipative nonlinear systems

In topology, one averages over local geometrical details to reveal robust global features. This approach proves crucial for understanding quantized bulk transport and exotic boundary effects of linear wave propagation in (meta-)materials. Moving beyond linear Hamiltonian systems, the study of topology in physics strives to characterize open (non-Hermitian) and interacting systems. Here, we establish a framework for the topological classification of driven-dissipative nonlinear systems. Specifically, we define a graph index for the Floquet semiclassical equations of motion describing such systems. The graph index builds upon topological vector analysis theory and combines knowledge of the particle-hole nature of fluctuations around each out-of-equilibrium stationary state. To test this approach, we divulge the topological invariants arising in a micro-electromechanical nonlinear resonator subject to forcing and a time-modulated potential. Our framework classifies the complete phase diagram of the system and reveals the topological origin of driven-dissipative phase transitions, as well as that of under- to over-damped responses. Furthermore, we predict topological phase transitions between symmetry-broken phases that pertain to population inversion transitions. This rich manifesting phenomenology reveals the pervasive link between topology and nonlinear dynamics, with broad implications for all fields of science.

cond-mat.mes-hall↗

arXiv2024

Enhancing Membrane-Based Scanning Force Microscopy Through an Optical Cavity

The new generation of strained silicon nitride resonators harbors great promise for scanning force microscopy, especially when combined with the extensive toolbox of cavity optomechanics. However, accessing a mechanical resonator inside an optical cavity with a scanning tip is challenging. Here, we experimentally demonstrate a cavity-based scanning force microscope based on a silicon nitride membrane sensor. We overcome geometric constraints by making use of the extended nature of the mechanical resonator normal modes, which allows us to spatially separate the scanning and readout sites of the membrane. Our microscope is geared towards low-temperature applications in the zeptonewton regime, such as nanoscale nuclear spin detection and imaging.

physics.optics↗

arXiv2024

The Stochastic Guitar

Stochastic physics is a central pillar of modern research in many fields, but is rarely presented to undergrad students in a hands-on experiment. Here, we demonstrate how a human-scale, simple, and affordable experimental setup can be used to fill this gap, and to illustrate many advanced concepts in a step-by-step approach. Based on a metal wire (such as a guitar string), our setup facilitates the observation of fluctuating dynamics in the time domain, the frequency spectrum, and in the rotating phase space. The latter allows introducing time-dependent cross-correlations between the sine and cosine quadratures of the stochastic motion, which feature deterministic order even in the absence of any deterministic forces.

physics.class-ph↗

arXiv2024

Hamiltonian reconstruction via ringdown dynamics

Many experimental techniques aim at determining the Hamiltonian of a given system. The Hamiltonian describes the system's evolution in the absence of dissipation, and is often central to control or interpret an experiment. Here, we theoretically propose and experimentally demonstrate a method for Hamiltonian reconstruction from measurements over a large area of phase space, overcoming the main limitation of previous techniques. A crucial ingredient for our method is the presence of dissipation, which enables sampling of the Hamiltonian through ringdown-type measurements. We apply the method to a driven-dissipative system -- a parametric oscillator -- observed in a rotating frame, and reconstruct the (quasi-)Hamiltonian of the system. Furthermore, we demonstrate that our method provides direct experimental access to the so-called symplectic norm of the stationary states of the system, which is tied to the particle- or hole-like nature of excitations of these states. In this way, we establish a method to unveil qualitative differences between the fluctuations around stabilized minima and maxima of the nonlinear out-of-equilibrium stationary states. Our method constitutes a versatile approach to characterize a wide class of driven-dissipative systems.

cond-mat.mes-hall↗

arXiv2023

Roadmap on Nanoscale Magnetic Resonance Imaging

The field of nanoscale magnetic resonance imaging (NanoMRI) was started 30 years ago. It was motivated by the desire to image single molecules and molecular assemblies, such as proteins and virus particles, with near-atomic spatial resolution and on a length scale of 100 nm. Over the years, the NanoMRI field has also expanded to include the goal of useful high-resolution nuclear magnetic resonance (NMR) spectroscopy of molecules under ambient conditions, including samples up to the micron-scale. The realization of these goals requires the development of spin detection techniques that are many orders of magnitude more sensitive than conventional NMR and MRI, capable of detecting and controlling nanoscale ensembles of spins. Over the years, a number of different technical approaches to NanoMRI have emerged, each possessing a distinct set of capabilities for basic and applied areas of science. The goal of this roadmap article is to report the current state of the art in NanoMRI technologies, outline the areas where they are poised to have impact, identify the challenges that lie ahead, and propose methods to meet these challenges. This roadmap also shows how developments in NanoMRI techniques can lead to breakthroughs in emerging quantum science and technology applications.

cond-mat.mes-hall↗