arXiv subjects

Alexandros Emboras

Publications and source records attributed to Alexandros Emboras.

10 recordsLinked to original sources

arXiv2026

Elemental Germanium Phase-Change Memory

Phase-change memory (PCM) is a mature technology for fast, scalable, non-volatile data storage, with applications spanning embedded memory, as well as in-memory and neuromorphic computing. PCM predominantly relies on chalcogenide alloys, with $\mathrm{Ge_2Sb_2Te_5}$ (GST) as the industry standard. Yet in these alloys, the individual Ge, Sb, and Te atoms redistribute upon cycling, causing stochastic operation and ultimately device failure. To address this issue, elemental antimony was proposed as a PCM material, but it exhibits a metastable amorphous state that prevents reliable data retention. Moreover, tellurium and antimony can contaminate complementary metal-oxide-semiconductor (CMOS) production lines or act as unintended dopants, restricting manufacturing of PCM to dedicated fabs. Here we introduce elemental germanium (Ge) as a CMOS-native phase-change material that overcomes these fundamental limitations. In a vertical PCM cell architecture, Ge enables sub-nanosecond crystallization (240 ps, 40 times faster than GST), non-volatile data storage with excellent thermal stability ($>$110 {\deg}C for 10 years vs. $\sim$87 {\deg}C for GST), and a resistance drift coefficient approximately 60% lower than in GST. These results establish pure Ge, a standard semiconductor, as an alternative to chalcogenide phase-change materials, achieving superior performance in key metrics and enabling phase-change memory to be fabricated in standard semiconductor facilities.

cond-mat.mtrl-sci↗

arXiv2026

20 ps Non-Destructive Read and 1 ns Write Operations at <5 V in Ferroelectric HfO2/ZrO2 Non-Volatile Memories

Achieving low-voltage, nanosecond multi-level programming and non-destructive read-out of ferroelectric non-volatile memories (NVM) is critical for analog in-memory computing architectures relying on ferroelectric capacitive devices (FeCap). We integrate HfO2/ZrO2 ferroelectric nanolayers concurrently in the BEOL of CMOS and on SiO2/Si, achieving nanosecond multilevel switching with programming voltages below 5 V. Partial ferroelectric switching enhances FeCap endurance above 1011 cycles, leading to MemCapacitance (MC) states with non-destructive read-out and 10-year retention. However, experiments reveal the collapse of the MC window for read frequencies above 1 MHz. To overcome this speed limit, we introduce a novel, non-destructive readout methodology. Using electrical pulses with widths down to 20 ps, below the RC time constant of the FeCaps, we enable measurement of the polarization-dependent leakage current, providing ultrafast and non-destructive read operations at only 14 fJ.

physics.app-ph↗

arXiv2026

Multiscale Modeling of Metal/Oxide/Metal Conductive Bridging Random Access Memory Cells: from Ab Initio to Finite Element Calculations

We present a multiscale simulation framework to compute the current vs. voltage (I-V ) characteristics of metal/oxide/metal structures building the core of conductive bridging random access memory (CBRAM) cells and to shed light on their resistance switching properties. The approach relies on a finite element model whose input material parameters are extracted either from ab initio or from machine-learned empirical calculations. The applied techniques range from molecular dynamics and nudged elastic band to electronic and thermal quantum transport. Such an approach drastically reduces the number of fitting parameters needed and makes the resulting modeling environment more accurate than traditional ones. The developed computational framework is then applied to the investigation of an Ag/a-SiO2/Pt CBRAM, reproducing experimental data very well. Moreover, the relevance of Joule heating is assessed by considering various cell geometries. It is found that self-heating manifests itself in devices with thin conductive filaments with few-nanometer diameters and at current concentrations in the 10s-microampere range. With the proposed methodology it is now possible to explore the potential of not-yet fabricated memory cells and to reliably optimize their design.

cond-mat.mtrl-sci↗

arXiv2025

Conductance-dependent Photoresponse in a Dynamic SrTiO3 Memristor for Biorealistic Computing

Modern computers perform pre-defined operations using static memory components, whereas biological systems learn through inherently dynamic, time-dependent processes in synapses and neurons. The biological learning process also relies on global signals - neuromodulators - who influence many synapses at once depending on their dynamic, internal state. In this study, using optical radiation as a global neuromodulatory signal, we investigate nanoscale SrTiO3 (STO) memristors that can act as solid-state synapses. Via diverse sets of measurements, we demonstrate that the memristor's photoresponse depends on the electrical conductance state, following a well-defined square root relation. Additionally, we show that the conductance decays after photoexcitation with time constants in the range of 1 - 10 s and that this effect can be reliably controlled using an electrical bias. These properties in combination with our device's low power operation (< 1pJ per optical pulse) and small measurement variability may pave the way for space- and energy-efficient implementations of complex biological learning processes in electro-optical hardware.

cs.ET↗

arXiv2025

Termination-Dependent Resistive Switching in SrTiO$_3$ Valence Change Memory Cells

Valence change memory (VCM) cells based on SrTiO$_3$ (STO), a perovskite oxide, are a promising type of emerging memory device. While the operational principle of most VCM cells relies on the growth and dissolution of one or multiple conductive filaments, those based on STO are known to exhibit a distinctive, 'interface-type' switching, which is associated with the modulation of the Schottky barrier at their active electrode. Still, a detailed picture of the processes that lead to interface-type switching is not available. In this work, we use a fully atomistic and ab initio model to study the resistive switching of a Pt-STO-Ti stack. We identify that the termination of the crystalline STO plays a decisive role in the switching mechanism, depending on the relative band alignment between the material and the Pt electrode. In particular, we show that the accumulation of oxygen vacancies at the Pt side can be at the origin of resistive switching in TiO$_2$-terminated devices by lowering the conduction band minimum of the STO layer, thus facilitating transmission through the Schottky barrier. Moreover, we investigate the possibility of filamentary switching in STO and reveal that it is most likely to occur at the Pt electrode of the SrO-terminated cells.

cond-mat.mtrl-sci↗

arXiv2024

Single Neuromorphic Memristor closely Emulates Multiple Synaptic Mechanisms for Energy Efficient Neural Networks

Biological neural networks do not only include long-term memory and weight multiplication capabilities, as commonly assumed in artificial neural networks, but also more complex functions such as short-term memory, short-term plasticity, and meta-plasticity - all collocated within each synapse. Here, we demonstrate memristive nano-devices based on SrTiO3 that inherently emulate all these synaptic functions. These memristors operate in a non-filamentary, low conductance regime, which enables stable and energy efficient operation. They can act as multi-functional hardware synapses in a class of bio-inspired deep neural networks (DNN) that make use of both long- and short-term synaptic dynamics and are capable of meta-learning or "learning-to-learn". The resulting bio-inspired DNN is then trained to play the video game Atari Pong, a complex reinforcement learning task in a dynamic environment. Our analysis shows that the energy consumption of the DNN with multi-functional memristive synapses decreases by about two orders of magnitude as compared to a pure GPU implementation. Based on this finding, we infer that memristive devices with a better emulation of the synaptic functionalities do not only broaden the applicability of neuromorphic computing, but could also improve the performance and energy costs of certain artificial intelligence applications.

cs.NE↗

arXiv2019

Waveguide-integrated van der Waals heterostructure photodetector at telecom band with high speed and high responsivity

Intensive efforts have been devoted to exploit novel optoelectronic devices based on two-dimensional (2D) transition-metal dichalcogenides (TMDCs) owing to their strong light-matter interaction and distinctive material properties. In particular, photodetectors featuring both high-speed and high-responsivity performance are of great interest for a vast number of applications such as high-data-rate interconnects operated at standardized telecom wavelengths. Yet, the intrinsically small carrier mobilities of TMDCs become a bottleneck for high-speed application use. Here, we present high-performance vertical van der Waals heterostructure-based photodetectors integrated on a silicon photonics platform. Our vertical MoTe2/graphene heterostructure design minimizes the carrier transit path length in TMDCs and enables a record-high measured bandwidth of at least 24GHz under a moderate bias voltage of -3 volts. Applying a higher bias or employing thinner MoTe2 flakes boosts the bandwidth even to 50GHz. Simultaneously, our device reaches a high external responsivity of 0.2A/W for incident light at 1300nm, benefiting from the integrated waveguide design. Our studies shed light on performance trade-offs and present design guidelines for fast and efficient devices. The combination of 2D heterostructures and integrated guided-wave nano photonics defines an attractive platform to realize high-performance optoelectronic devices, such as photodetectors, light-emitting devices and electro-optic modulators.

cond-mat.mes-hall↗

arXiv2018

Single Atom Plasmonic Switch

The atom sets an ultimate scaling limit to Moores law in the electronics industry. And while electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling-similar to electronics-is only limited by the atom. More precisely, we introduce an electrically controlled single atom plasmonic switch. The switch allows for fast and reproducible switching by means of the relocation of an individual or at most -- a few atoms in a plasmonic cavity. Depending on the location of the atom either of two distinct plasmonic cavity resonance states are supported. Experimental results show reversible digital optical switching with an extinction ration of 10 dB and operation at room temperature with femtojoule (fJ) power consumption for a single switch operation. This demonstration of a CMOS compatible, integrated quantum device allowing to control photons at the single-atom level opens intriguing perspectives for a fully integrated and highly scalable chip platform -- a platform where optics, electronics and memory may be controlled at the single-atom level.

physics.optics↗

arXiv2018

Plasmonically enhanced graphene photodetector featuring 100 GBd, high-responsivity and compact size

Graphene has shown great potentials for high-speed photodetection. Yet, the responsivities of graphene-based high-speed photodetectors are commonly limited by the weak effective absorption of atomically thin graphene. Here, we propose and experimentally demonstrate a plasmonically enhanced waveguide-integrated graphene photodetector. The device which combines a 6 micron long layer of graphene with field-enhancing nano-sized metallic structures, demonstrates a high external responsivity of 0.5 A/W and a fast photoresponse way beyond 110 GHz. The high efficiency and fast response of the device enables for the first time 100 Gbit/s PAM-2 and 100 Gbit/s PAM-4 data reception with a graphene based device. The results show the potential of graphene as a new technology for highest-speed communication applications.

physics.optics↗

arXiv2017

Ab-initio Modeling of CBRAM Cells: from Ballistic Transport Properties to Electro-Thermal Effects

We present atomistic simulations of conductive bridging random access memory (CBRAM) cells from first-principles combining density-functional theory and the Non-equilibrium Green's Function formalism. Realistic device structures with an atomic-scale filament connecting two metallic contacts have been constructed. Their transport properties have been studied in the ballistic limit and in the presence of electron-phonon scattering, showing good agreement with experimental data. It has been found that the relocation of few atoms is sufficient to change the resistance of the CBRAM by 6 orders of magnitude, that the electron trajectories strongly depend on the filament morphology, and that self-heating does not affect the device performance at currents below 1 $μ$A.

cond-mat.mes-hall↗