arXiv subjects

Alexey Shashurin

Publications and source records attributed to Alexey Shashurin.

18 recordsLinked to original sources

arXiv2026

Absolute Radar-REMPI via Two-Color REMPI and Absolutely Calibrated CMS for Diagnostics of Species in Gaseous Mixtures

This work demonstrates the initial development of the Absolute Radar-REMPI diagnostic technique, a development of the Radar-REMPI technique that provides an approach for absolutely calibrated measurements, which is universally applicable to any type of tested gaseous species. Absolute measurements are achieved through the utilization of two-color Resonance Enhanced Multiphoton Ionization (REMPI) and absolutely calibrated Coherent Microwave Scattering (CMS). Two-color REMPI of molecular oxygen (O2) was demonstrated using two intersected laser beams: a 355 nm beam and a tunable parametric beam at 241-242 nm. The results confirm that the two-beam configuration can successfully generate measurable ionization associated with the targeted transition of O2 within the beam intersection region, as verified using an ICCD camera. These findings establish a foundation for the further development of Absolute Radar-REMPI, which has the potential to enable highly sensitive, real-time diagnostics of absolute species densities in unsteady flowfields such as those occurring in hypersonic shock tunnels and electric propulsion systems.

physics.plasm-ph↗

arXiv2024

One-dimensional mapping of femtosecond laser filaments using coherent microwave scattering

This paper reports on the use of coherent microwave scattering (CMS) for spatially resolved electron number density measurements of elongated plasma structures induced at mid-IR femtosecond filamentation in air. The presented studies comprise one-dimensional mapping of laser filaments induced via 3.9 um, 127.3 fs laser pulses at output energies up to 15 mJ. The axial electron number density was measured to be invariant (about 2x10$^{15}$ cm$^{-3}$) along the entire filament length and for all tested laser pulse energies 5-15 mJ, and the corresponding laser intensity in the middle portion of the filament was estimated to be nearly constant for 5-15 mJ pulse energies (about 30-40 TW/cm$^2$). These fundings support that intensity clamping conditions were achieved in the experiments. The proposed approach enables capabilities that are currently unavailable to perform absolute and longitudinally resolved measurements of electron number density in laser filaments and to precisely characterize conditions associated with self-focusing and intensity clamping.

physics.plasm-ph↗

arXiv2023

Application of Coherent Microwave Scattering and Multiphoton Ionization for Diagnostics of Electric Propulsion Systems

Nonintrusive measurements of plasma properties are essential to evaluate, and numerically simulate, the in-flight performance of electric propulsion systems. As a logical first step in the development of new diagnostic techniques, this work depicts the implementation of multiphoton ionization and coherent microwave scattering (MPI-CMS) in a gridded-ion accelerator operating on rare gases. Presented studies primarily comprise photoionization spectroscopy of ground and excited state-populations of both neutrals and ions supplemented by optical emission spectroscopy and Langmuir probe derived plume properties. Results suggest the potential of MPI-CMS for non-intrusive measurements of specie number densities.

physics.plasm-ph↗

arXiv2022

Experimental Study of a Low-Voltage Pulsed Plasma Thruster for Nanosatellites

In this paper, a coaxial pulsed plasma thruster was designed, built, and tested. This design confirmed PPT operation at substantially reduced discharge voltages of 100 to 200 V across the discharge plasma at a discharge current level of 10.4 kA similar to magnetoplasmadynamic arcs. The PPT cathode was imaged with an ICCD camera over a wide range of pressures, and the photos indicated "spotless" diffuse arc attachment to the cathode at higher pressures, and the appearance of conventional cathode spots at lower pressures. Cathode erosion rate measurements support the conclusion of "spotless" operation at higher pressures and the presence of cathode spots at lower pressures (the erosion rates of 16.194 ug/C and 40.785 ug/C were measured at 4 Torr and 3.5e-5 Torr, respectively).

physics.plasm-ph↗

arXiv2022

Ionization rate and plasma dynamics at 3.9 micron femtosecond photoionization of air

The introduction of mid-IR optical parametric chirped pulse amplifiers (OPCPAs) has catalyzed interest in multi-millijoule, infrared femtosecond pulse-based filamentation. As tunneling ionization is a fundamental first stage in these high-intensity laser-matter interactions, characterizing the process is critical to understand derivative topical studies on femtosecond filamentation and self-focusing. Here, we report constructive-elastic microwave scattering-based measurements of total electron count, electron number densities, and photoionization rates generated by 3.9 micron femtosecond mid-infrared tunneling ionization of atmospheric air. Consequently, we determine photoionization rates in the range of 5.0x10$^{8}$-6.1x10$^{9}$ s$^{-1}$ for radiation intensities 1.3x10$^{13}$-1.9x10$^{14}$ W/cm$^{2}$, respectively. The proposed approach paves the wave to precisely tabulate photoionization rates in mid-IR for broad range of intensities and gas types and to study plasma dynamics at mid-IR filamentation.

physics.plasm-ph↗

arXiv2022

Initial transient stage of pin-to-pin nanosecond repetitively pulsed discharges in air

In this work, evolution of parameters of nanosecond repetitively pulsed (NRP) discharges in pin-to-pin configuration in air was studied during transient stage of initial twenty discharge pulses. Gas and plasma parameters in the discharge gap were measured using coherent microwave scattering (CMS), optical emission spectroscopy (OES) and laser Rayleigh scattering (LRS) for NRP discharges at repetition frequencies of 1, 10 and 100 kHz. Memory effects (when perturbations induced by the previous discharge pulse would not decay fully till the subsequent pulse) were detected for the repetition frequencies of 10 and 100 kHz. For 10 kHz NRP discharge, the discharge parameters experienced significant change after the first pulse and continued to substantially fluctuate between the subsequent pulses due to rapid evolution of gas density and temperature during the 100 us inter-pulse time caused by intense redistribution of the flow field in the gap on that time scale. For 100 kHz NRP discharge, the discharge pulse parameters reached a new steady state at about five pulses after initiation. This new steady state was associated with well-reproducible parameters between the discharge pulses and substantial reduction of breakdown voltage, discharge pulse energy, and electron number density in comparison with the first discharge pulse.

physics.plasm-ph↗

arXiv2021

Thomson and Collisional Regimes of In-Phase Coherent Microwave Scattering Off Gaseous Microplasmas

The total number of electrons in a classical microplasma can be non-intrusively measured through elastic in-phase coherent microwave scattering (CMS). Here, we establish a theoretical basis for the CMS diagnostic technique with an emphasis on Thomson and collisional scattering in short, thin unmagnetized plasma media. Experimental validation of the diagnostic is subsequently performed via linearly polarized, variable frequency microwave scattering off laser induced air-based microplasmas with diverse ionization and collisional features. Namely, conducted studies include a verification of short-dipole-like radiation behavior, plasma volume imaging via intensified charge-coupled device (ICCD) photography, and measurements of relative phases, total scattering cross sections, and total number of electrons $N_e$ in the generated plasma filaments following absolute calibration using a dielectric scattering sample. Findings of the paper suggest an ideality of the diagnostic in the Thomson "free-electron" regime - where a detailed knowledge of plasma and collisional properties (which are often difficult to accurately characterize due to the potential influence of inhomogeneities, local temperatures and densities, present species, and so on) is unnecessary to extract $N_e$ from the scattered signal.

physics.plasm-ph↗

arXiv2021

Experimental study of atmospheric pressure single-pulse nanosecond discharge in pin-to-pin configuration

In this work, we present an experimental study of nanosecond high-voltage discharges in a pin-to-pin electrode configuration at atmospheric conditions operating in single-pulse mode (no memory effects). Various discharge parameters, including voltage, current, gas density, rotational/vibrational/gas temperature, and electron number density, were measured. Several different measurement techniques were used, including microwave Rayleigh scattering, laser Rayleigh scattering, optical emission spectroscopy enhanced with a nanosecond probing pulse, fast photography, and electrical parameter measurements. Spark and corona discharge regimes were studied with discharge pulse duration of 90 ns and electrode gap sizes ranging from 2 to 10 mm. The spark regime was observed for gaps < 6 mm using discharge pulse energies of 0.6-1 mJ per mm of the gap length. Higher electron number densities, total electron number per gap length, discharge currents, and gas temperatures were observed for smaller electrode gaps and larger pulse energies, reaching maximal values of about 7.5x10^15 cm-3, 3.5x10^11 electrons per mm, 22 A, and 4,000 K (at 10 us after the discharge), respectively, for a 2 mm gap and 1 mJ/mm discharge pulse energy. Initial breakdown was followed by a secondary breakdown occurring about 30-70 ns later and was associated with ignition of a cathode spot and transition of the discharge to cathodic arc. A majority of the discharge pulse energy was deposited into the gas before the secondary breakdown (85-89%). The electron number density after the ns discharge pulse decayed with a characteristic time scale of 150 ns governed by dissociative recombination and electron attachment to oxygen mechanisms. For the corona regime, substantially lower pulse energies (~0.1 mJ/mm), peak conduction current (1-2 A), and electron numbers (3-5x10^10 electrons per mm), and gas temperatures (360 K) were observed.

physics.plasm-ph↗

arXiv2021

Combined Microwave and Laser Rayleigh Scattering Diagnostics for Pin-to-Pin Nanosecond Discharges

In this work, the temporal decay of electrons produced by an atmospheric pin-to-pin nanosecond discharge operating in the spark regime was measured via a combination of microwave Rayleigh scattering (MRS) and laser Rayleigh scattering (LRS). Due to the initial energy deposition of the nanosecond pulse, a variance in local gas density occurs on the timescale of electron decay. Thus, the assumption of a constant collisional frequency is no longer applicable when electron number data is extracted from the MRS measurements. To recalibrate the MRS measurements throughout the electron decay period, temporally-resolved LRS measurements of the local gas density were performed over the event duration. Local gas density was measured to be 30% of the ambient level during the later stages of electron decay and recovers at about 1 ms after the discharge. A shock front traveling approximately 500 m/s was additionally observed. Coupled with plasma volume calibration via temporally-resolved ICCD imaging, the corrected decay curves of the electron number and electron number density are presented with a measured peak electron number density of 4.5*10^15 cm^-3 and decay rate of ~ 0.1-0.35*10^7 s^-1. A hybrid MRS and LRS diagnostic technique can be applied for a broad spectrum of atmospheric-pressure microplasmas where a variation in number gas density is expected due to an energy deposition in the discharge.

physics.plasm-ph↗

arXiv2019

Liquid-Fed Pulsed Plasma Thruster for Propelling Nanosatellites

This paper presents a novel micropropulsion system for nanosatellite applications - a liquid fed pulsed-plasma thruster (LF-PPT) comprised of a Lorentz-force pulsed plasma accelerator (PPA) and a low-energy surface flashover (LESF) igniter. A 3 μF / 2 kV capacitor bank, offering shot energies of < 6 J, supported PPA current pulsed durations of ~ 16 μs with observed peaks of 7.42 kA. Plasma jet exhaust velocity was measured at ~ 32 km/s using a time-of-flight technique via a set of double probes located along the jet's path. Intensified charge coupled device (ICCD) photography was concurrently leveraged to visualize plasma dynamics and mechanisms of the ignition / acceleration events. A peak thrust and impulse bit of 5.8 N and 35 μNs, respectively, were estimated using large-area Langmuir probe measurements of total ion flux produced by the thruster.

physics.app-ph↗

arXiv2019

Enhancement of DC-driven flashing corona by dielectric enclosure

In this work, the effect of flashing corona enhancement by introducing Teflon dielectric enclosure in vicinity to the electrode assembly was studied. The discharge operating in air without the dielectric was able to operate within a very narrow voltage range of approximately 200 V. The pulsing frequency was below 1.2 kHz and current peaks were below 14 mA. Increasing the applied voltage onto the positive electrode beyond this range would result in sparks between the electrodes. When the Teflon tube enclosure surrounding the high voltage electrode was used, the window of stable flashing corona operation expanded up to 3-5 kV. The pulsing frequency increased up to 12 kHz and the current peak level increased to approximately 35 mA. Increasing voltage beyond the point with peak pulsing frequency would result in a drop of pulsing frequency until the discharge pulsations stopped completely. The Teflon enclosure was able to enhance the average power deposited into the discharge from 10 to 220 mWatt. In addition, the product gases of the enhanced flashing corona were tested to be mostly ozone with traceable amount of NO$_2$. The discharge used about 150 eV and 1950 eV per one ozone molecule and nitrogen dioxide molecule respectively.

physics.plasm-ph↗

arXiv2019

Thomson microwave scattering for electron number density diagnostics of miniature plasmas at low pressure

This work proposes a novel method of Thomson microwave scattering for electron number density measurements of miniature plasmas at pressures < 10 Torr. This method is applied to determine electron number density in a positive column of glow discharge initiated at 5 Torr in air with a plasma column diameter of 3.4 mm. The Thomson Microwave Scattering(TMS) system measured the electron number density to be 3.36*10^10 cm^-3. The result obtained using the TMS system was validated against the measurements made using the well-known technique of microwave quarter-wave hairpin resonator. Measurements with the hairpin resonator yielded an electron number density of 2.07*10^10 cm^-3 providing adequate agreement with the TMS system.

physics.plasm-ph↗

arXiv2018

Low Energy Surface Flashover for Initiation of Electric Propulsion Devices

An approach to utilize Low Energy Surface Flashover (LESF) for triggering the discharge in electric propulsion systems has been demonstrated. LESF uses conventional surface flashover mechanism with limited duration of high-current stage of the flashover below <100-200 ns. This eliminates the damage to the LESF assembly and allows robust operation of the same assembly for >1.5*10^6 consecutive flashovers. The amount of the seed plasma created in the individual LESF event was demonstrated to be sufficient to trigger a moderate current arc which models a discharge in an electric propulsion system.

physics.plasm-ph↗

arXiv2018

Time-Resolved Measurements of Electron Density in Nanosecond Pulsed Plasmas Using Microwave Scattering

In this work, Rayleigh microwave scattering was utilized to measure the electron number density produced by nanosecond high voltage breakdown in air between two electrodes in a pin-to-pin configuration (peak voltage 26 kV and pulse duration 55 ns). The peak electron density decreased from 1*10^17 cm^-3 down to 7*10^14 cm^-3 when increasing the gap distance from 2 to 8 mm (total electron number decreased from 2*10^13 down to 5*10^11 respectively). Electron number density decayed on the timescale of about several microseconds due to dissociative recombination.

physics.plasm-ph↗

arXiv2016

DC high voltage to drive helium plasma jet comprised of repetitive streamer breakdowns

This paper demonstrates and studies helium atmospheric pressure plasma jet comprised of series of repetitive streamer breakdowns, which is driven by a pure DC high voltage (auto-oscillations). Repetition frequency of the breakdowns is governed by the geometry of discharge electrodes/surroundings and gas flow rate. Each next streamer is initiated when the electric field on the anode tip recovers after the previous breakdown and reaches the breakdown threshold value of about 2.5 kV/cm. Repetition frequency of the streamer breakdowns excited using this principle can be simply tuned by reconfiguring the discharge electrode geometry. This custom-designed type of the helium plasma jet, which operates on the DC high voltage and is comprised of the series of the repetitive streamer breakdowns at frequency about 13 kHz, is demonstrated.

physics.plasm-ph↗

arXiv2016

Role of substrate temperature at graphene synthesis in arc discharge

The substrate temperature required for synthesis of graphene in an arc discharge plasma was studied. It was shown that an increase of copper substrate temperature up to the melting point leads to an increase in the amount of graphene production and the quality of graphene sheets. Favorable range of substrate temperatures for arc-based graphene synthesis was determined, and it is in a relatively narrow range of about 1210-1340 K.

physics.plasm-ph↗

arXiv2014

Modeling radio communication blackout and blackout mitigation in hypersonic vehicles

A procedure for the modeling and analysis of radio communication blackout of hypersonic vehicles is presented. The weakly ionized plasma generated around the surface of a hypersonic reentry vehicle is simulated using full Navier-Stokes equations in multi-species single fluid form. A seven species air chemistry model is used to compute the individual species densities in air including ionization - plasma densities are compared with experiment. The electromagnetic wave's interaction with the plasma layer is modeled using multi-fluid equations for fluid transport and full Maxwell's equations for the electromagnetic fields. The multi-fluid solver is verified for a whistler wave propagating through a slab. First principles radio communication blackout over a hypersonic vehicle is demonstrated along with a simple blackout mitigation scheme using a magnetic window.

physics.comp-ph↗

arXiv2014

Electromagnetic Wave Propagation In The Plasma Layer of A Reentry Vehicle

The ability to simulate a reentry vehicle plasma layer and the radio wave interaction with that layer, is crucial to the design of aerospace vehicles when the analysis of radio communication blackout is required. Results of aerothermal heating, plasma generation and electromagnetic wave propagation over a reentry vehicle are presented in this paper. Simulation of a magnetic window radio communication blackout mitigation method is successfully demonstrated.

physics.comp-ph↗