arXiv subjects

Ali Javey

Publications and source records attributed to Ali Javey.

32 records · Page 2Linked to original sources

arXiv2008

Synthesis, Contact Printing, and Device Characterization of Ni-Catalyzed, Crystalline InAs Nanowires

InAs nanowires have been actively explored as the channel material for high performance transistors owing to their high electron mobility and ease of ohmic metal contact formation. The catalytic growth of non-epitaxial InAs nanowires, however, has often relied on the use of Au colloids which is non-CMOS compatible. Here, we demonstrate the successful synthesis of high yield of crystalline InAs nanowires with high yield and tunable diameters by using Ni nanoparticles as the catalyst material on amorphous SiO2 substrates. The nanowires show superb electrical properties with field-effect electron mobility ~2,700 cm2/Vs and ION/IOFF >103. The uniformity and purity of the grown InAs nanowires are further demonstrated by large-scale assembly of parallel arrays of nanowires on substrates via the contact printing process that enables high performance, printable transistors, capable of delivering 5-10 mA ON currents (~400 nanowires).

cond-mat.mtrl-sci↗

arXiv2007

Wafer-Scale Assembly of Semiconductor Nanowire Arrays by Contact Printing

Controlled and uniform assembly of "bottom-up" nanowire (NW) materials with high scalability has been one of the significant bottleneck challenges facing the potential integration of nanowires for both nano and macro electronic circuit applications. Many efforts have focused on tackling this challenge, and while significant progress has been made, still most presented approaches lack either the desired controllability in the positioning of nanowires or the needed uniformity over large scales. Here, we demonstrate wafer-scale assembly of highly ordered, dense, and regular arrays of NWs with high uniformity and reproducibility through a simple contact printing process. We demonstrate contact printing as a versatile strategy for direct transfer and controlled positioning of various NW materials into complex structural configurations on substrates. The assembled NW pitch is shown to be readily modulated through the surface chemical treatment of the receiver substrate, with the highest density approaching ~8 NW/um, ~95% directional alignment and wafer-scale uniformity. Furthermore, we demonstrate that our printing approach enables large-scale integration of NW arrays for various device structures on both Si and plastic substrates, with a controlled semiconductor channel width, and therefore ON current, ranging from a single NW (~10 nm) and up to ~250 um, consisting of a parallel array of over 1,250 NWs.

cond-mat.mtrl-sci↗

arXiv2005

Ultra-High Yield Growth of Vertical Single-Walled Carbon Nanotubes: Hidden Roles of Hydrogen and Oxygen

An oxygen assisted hydrocarbon chemical vapor deposition (CVD) method is developed to afford large-scale highly reproducible ultra high-yield growth of vertical single-walled carbon nanotubes (SWNT). It is revealed that reactive hydrogen (H)-species, inevitable in hydrocarbon-based growth, are damaging to the formation of sp2-like SWNTs. The addition of oxygen scavenges H-species and provides a powerful control over the C/H ratio to favor SWNT growth. The revelation of the roles played by hydrogen and oxygen leads to a unified and universal optimum growth condition for SWNTs. Further, a versatile method is developed to form vertical SWNT films on any substrate, lifting a major substrate-type limitation for aligned SWNTs.

cond-mat.mtrl-sci↗

arXiv2005

Electrical Contacts to Carbon Nanotubes Down to 1nm in Diameter

Rhodium (Rh) is found similar to Palladium (Pd) in making near-ohmic electrical contacts to single-walled carbon nanotubes (SWNTs) with diameters d > ~ 1.6 nm. Non-negligible positive Schottky barriers (SBs) exist between Rh or Pd and semiconducting SWNTs (S-SWNTs) with d < ~ 1.6 nm. With Rh and Pd contacts, the characteristics of SWNT field-effect transistors (FETs) and SB heights at the contacts are largely predictable based on the SWNT diameters, without random variations among devices. Surprisingly, electrical contacts to metallic SWNTs (M-SWNTs) also appear to be diameter dependent especially for small SWNTs. Ohmic contacts are difficult for M-SWNTs with diameters < ~ 1.0 nm possibly due to tunnel barriers.

cond-mat.mes-hall↗

arXiv2005

Deterministic Synthesis of Carbon Nanotubes

A novel method is developed to enable the formation, positioning and patterning of individual metal nano-clusters with controllable and monodispersed sizes down to 1-2 nm-scale. Among wide range of potential applications, the nanoparticle arrays are used for deterministic synthesis of monodispersed single walled carbon nanotubes. The carbon nanotubes are grown at individually controlled locations with near one-to-one yield, reaching one of the ultimate goals of nanotube synthesis.

cond-mat.mtrl-sci↗

arXiv2005

High Performance N-Type Carbon Nanotube Field Effect Transistors with Chemically Doped Contacts

Short channel (~80 nm) n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) with potassium (K) doped source and drain regions and high-k gate dielectrics (ALD HfO2) are obtained. For nanotubes with diameter ~ 1.6 nm and bandgap ~ 0.55 eV, we obtain n-MOSFET-like devices exhibiting high on-currents due to chemically suppressed Schottky barriers at the contacts, subthreshold swing of 70mV/decade, negligible ambipolar conduction and high on/off ratios up to 10^6 at a bias voltage of 0.5V. The results compare favorably with the state-of-the-art silicon n-MOSFETs and demonstrate the potential of SWNTs for future complementary electronics. The effects of doping level on the electrical characteristics of the nanotube devices are discussed.

cond-mat.mtrl-sci↗

arXiv2004

10 to 50 nm Long Quasi Ballistic Carbon Nanotube Devices Obtained Without Complex Lithography

A simple method combining photolithography and shadow (or angle) evaporation is developed to fabricate single-walled carbon nanotube (SWCNT) devices with tube lengths L~10-50 nm between metal contacts. Large numbers of such short devices are obtained without the need of complex tools such as electron beam lithography. Metallic SWCNTs with lengths ~ 10 nm, near the mean free path (mfp) of lop~15 nm for optical phonon scattering, exhibit near-ballistic transport at high biases and can carry unprecedented 100 mA currents per tube. Semiconducting SWCNT field-effect transistors (FETs) with ~ 50 nm channel lengths are routinely produced to achieve quasi-ballistic operations for molecular transistors. The results demonstrate highly length-scaled and high-performance interconnects and transistors realized with SWCNTs.

cond-mat.mtrl-sci↗

arXiv2004

Miniature Organic Transistors With Carbon Nanotubes as Quasi-One Dimensional Electrodes

As the dimensions of electronic devices approach those of molecules, the size, geometry and chemical composition of the contact electrodes play increasingly dominant roles in device functions. It is shown here that single-walled carbon nanotubes (SWNT) can be used as quasi one-dimensional (1D) electrodes to construct organic field effect transistors (FET) with molecular scale width (~2 nm) and channel length (1-3 nm). An important feature owing to the quasi 1D electrode geometry is the favorable gate electrostatics that allows for efficient switching of ultra-short organic channels. This affords room temperature conductance modulation by orders of magnitude for organic transistors that are only several-molecules in length, with switching characteristics superior to similar devices with lithographically patterned metal electrodes. With nanotubes, covalent carbon-carbon bonds could be utilized to form contacts to molecular materials. The unique geometrical, physical and chemical properties of carbon nanotube electrodes may lead to various interesting molecular devices.

cond-mat.mtrl-sci↗

arXiv2004

Self-Aligned Ballistic Molecular Transistors and Electrically Parallel Nanotube Arrays

Carbon nanotube field-effect transistors with structures and properties near the scaling limit with short (down to 50 nm) channels, self aligned geometries, palladium electrodes with low contact resistance and high-k dielectric gate insulators are realized. Electrical transport in these miniature transistors is near ballistic up to high biases at both room and low temperatures. Atomic layer deposited (ALD) high-k films interact with nanotube sidewalls via van der Waals interactions without causing weak localization at 4 K. New fundamental understanding of ballistic transport, optical phonon scattering and potential interfacial scattering mechanisms in nanotubes are obtained.

cond-mat.other↗

arXiv2004

High-Field, Quasi-Ballistic Transport in Short Carbon Nanotubes

Single walled carbon nanotubes with Pd ohmic contacts and lengths ranging from several microns down to 10 nm are investigated by electron transport experiments and theory. The mean free path (mfp) for acoustic phonon scattering is estimated to be lap~300 nm, and that for optical phonon scattering is lop~15 nm. Transport through very short (~10 nm) nanotubes is free of significant acoustic and optical phonon scattering and thus ballistic and quasi-ballistic at the low and high bias voltage limits respectively. High currents of up to 70 uA can flow through a short nanotube. Possible mechanisms for the eventual electrical breakdown of short nanotubes at high fields are discussed. The results presented here have important implications to high performance nanotube transistors and interconnects.

cond-mat.mes-hall↗

arXiv2004

Advancements in Complementary Carbon Nanotube Field-Effect Transistors

High performance p- and n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) are obtained by using high and low work function metals, Pd and Al as source/drain (S/D) electrodes respectively. Ohmic contacts made to chemically intrinsic SWNTs, with no or small Schottky barriers (SB), afford high ON-state currents up to 20 uA per tube. The lack of significant Fermi-level pinning at the nanotube-metal interfaces allows for fine-tuning of the barrier heights for p-and n-channel conductions by changing the contact metals. The air-stable p- and n-FETs thus obtained can be used for complementary nanoelectronics, as demonstrated with the fabrication of an inverter. Other important issues regarding nanotube FETs including hysteresis, OFF-state leak currents, choice of nanotube diameter, and threshold voltage control are discussed.

cond-mat.mes-hall↗

arXiv2003

Carbon Nanotube Field-Effect Transistors With Integrated Ohmic Contacts and High-k Gate Dielectrics

High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped nanotube segments as source/drain electrodes. The combination of these elements affords high ON currents, subthreshold swings of ~ 70-80 mV/decade, and allows for low OFF currents and suppressed ambipolar conduction. The doped source and drain approach resembles that of MOSFETs and can impart excellent OFF states to nanotube FETs under aggressive vertical scaling. This presents an important advantage over devices with metal source/drain, or devices commonly referred to as Schottky barrier FETs.

cond-mat.mes-hall↗

arXiv2003

Ballistic Transport in Metallic Nanotubes With Reliable Pd Ohmic Contacts

Contacting metallic single-walled carbon nanotubes by palladium (Pd) affords highly reproducible ohmic contacts and allows for detailed elucidation of ballistic transport in metallic nanotubes. The Pd ohmic contacts are more reliable than titanium (Ti) previously used for ballistic nanotube devices. In contrast, Pt contacts appear to give non-ohmic contacts to metallic nanotubes. For both ohmic and non-ohmic contacts, the length of the nanotube under the metal contact area is electrically turned off. Transport occurs from metal to nanotube at the edges of the contacts. Measurements with large numbers of Pd contacted nanotube samples reveal that the mean free path for defect scattering in SWNTs grown by chemical vapor deposition can be up to 4 microns. The mean free paths for acoustic phonon scattering are on the order of 500 nm at room temperature and >> 4 microns at low temperatures.

cond-mat↗

arXiv2003

Predicted Performance Advantages of Carbon Nanotube Transistors with Doped Nanotubes as Source/Drain

Most carbon nanotube field-effect transistors (CNTFETs) directly attach metal source/drain contacts to an intrinsic nanotube channel. When the gate oxide thickness is reduced, such transistors display strong ambipolar conduction, even when the Schottky barrier for electrons (or for holes) is zero. The resulting leakage current, which increases exponentially with the drain voltage, constrains the potential applications of such devices. In this paper, we use numerical simulations to show that if CNT based metal-oxide-semiconductor (MOS) FETs can be achieved by using heavily doped CNT sections as source and drain, ambipolar conduction will be suppressed, leakage current will be reduced, and the scaling limit imposed by source-drain tunneling will be extended. By eliminating the Schottky barrier between the source and channel, the transistor will be capable of delivering more on-current. The leakage current of such devices will be controlled by the full bandgap of CNTs (instead of half of the bandgap for SB CNTFETs) and band-to-band tunneling. These factors will depend on the diameter of nanotubes and the power supply voltage.

cond-mat.mes-hall↗