arXiv subjects

Ali Rajabpour

Publications and source records attributed to Ali Rajabpour.

26 records · Page 2Linked to original sources

arXiv2019

Thermal rectification and interface thermal resistance in hybrid pillared-graphene and graphene: A molecular dynamics approach

In this study, we investigate the thermal rectification and thermal resistance in the hybrid pillared-graphene and graphene (PGG) system. This is done through the classical molecular dynamics simulation (MD) and also with a continuum model. At first, the thermal conductivity of both pillared-graphene and graphene is calculated employing MD simulation and Fourier low. Our results show that the thermal conductivity of the pillared-graphene is much smaller than the graphene by an order of magnitude. Next, by applying positive and negative temperature gradients along the longitudinal direction of PGG, the thermal rectification is examined. The MD results indicate that for the lengths in the range of 36 to 86nm, the thermal rectification remains almost constant (~3-5%). We have also studied the phonon density of states (DOS) on both sides of the interface of PGG. The DOS curves show that there is phonon scattering at low frequencies (acoustic mode) that depends on the imposed temperature gradient direction in the system. Therefore, we can introduce the PGG as a promising thermal rectifier at room temperature. Furthermore, in the following of this work, we also explore the temperature distribution over the PGG by using the continuum model. The results that obtained from the continuum model predict the MD results such as the temperature distribution in the upper half layer and lower full layer graphene, the temperature gap and also the thermal resistance at the interface.

cond-mat.mtrl-sci↗

arXiv2019

Thermal conductivity and thermal rectification of nanoporous graphene: A molecular dynamics simulation

Using non-equilibrium molecular dynamics (NEMD) simulation, we study thermal properties of the so-called nanoporous graphene (NPG) sheet which contains a series of nanoporous in an ordered way and was synthesized recently (Science 360 (2018), 199). The dependence of thermal conductivity on sample size, edge chirality, and porosity concentration are investigated. Our results indicate that the thermal conductivity of NPG is about two orders smaller compared with of pristine graphene. Therefore this sheet can be used as a thermoelectric material. Also, the porosity concentration helps us to tune the thermal conductivity. Moreover, the results show that the thermal conductivity increases with growing sample length due to ballistic transport. On the other hand, along the armchair direction, the thermal conductivity is larger than zigzag direction. We also examined the thermal properties of the interface of NPG and graphene. The temperature drops significantly through the interface leading to the thermal resistance. The thermal resistance changes with imposed heat flux direction, and this difference cause significantly large thermal rectification factor, and heat current prefers one direction to another. Besides, to investigate those quantities fundamentally, we study the phonon density of states and scattering of them.

physics.comp-ph↗

arXiv2019

The effect of water/carbon interaction strength on interfacial thermal resistance and the surrounding molecular nanolayer of CNT and graphene nanoparticles

Heat transfer at the liquid/solid interface, especially at the nanoscale, has enormous importance in nanofluids. This study investigates liquid/solid interfacial thermal resistance and structure of the formed molecular nanolayer around a carbon-based nanoparticle. Employing non-equilibrium molecular dynamics simulation and thermal relaxation method, the nanofluid systems with different nanoparticle diameters and different surface wettability were investigated. Simulation results show that carbon nanotubes (CNTs) with a smaller diameter attract more value of the base fluid and lead to a reduced Kapitza resistance. It was found that the thickness of the nanolayer around the nanoparticle is independent of the water/carbon interaction strength. Also, the value of the Kapitza resistance decreases with increasing the interaction strength. Ultimately, a correlation was proposed for the thermal resistance of CNT/water and graphene/water nanofluids in terms of wettability intensity of nanoparticle surface. The proposed correlation in addition to fitting to simulation results can cover the physical conditions of the system.

cond-mat.soft↗

arXiv2019

Thermal transport at a nanoparticle-water interface: A molecular dynamics and continuum modeling study

Heat transfer between a silver nanoparticle and surrounding water has been studied using molecular dynamics (MD) simulations. The thermal conductance (Kapitza conductance) at the interface between a nanoparticle and surrounding water has been calculated using four different approaches: transient with/without temperature gradient (internal thermal resistance) in the nanoparticle, steady-state non-equilibrium and finally equilibrium simulations. The results of steady-state non-equilibrium and equilibrium are in agreement but differ from the transient approach results. MD simulations results also reveal that in the quenching process of a hot silver nanoparticle, heat dissipates into the solvent over a length-scale of ~ 2nm and over a timescale of less than 5ps. By introducing a continuum solid-like model and considering a heat conduction mechanism in water, it is observed that the results of the temperature distribution for water shells around the nanoparticle agree well with MD results. It is also found that the local water thermal conductivity around the nanoparticle is greater by about 50 percent than that of bulk water. These results have important implications for understanding heat transfer mechanisms in nanofluids systems and also for cancer photothermal therapy, wherein an accurate local description of heat transfer in an aqueous environment is crucial.

cond-mat.mtrl-sci↗

arXiv2019

Thermal transport in silicene nanotubes: Effects of length, grain boundary and strain

Thermal transport behavior in silicene nanotubes has become more important due to the application of these promising nanostructures in the engineering of next-generation nanoelectronic devices. We apply non-equilibrium molecular dynamics (NEMD) simulations to study the thermal conductivity of silicene nanotubes with different lengths and diameters. We further explore the effects of grain boundary, strain, vacancy defect, and temperature in the range of 300-700 K on the thermal conductivity. Our results indicate that the thermal conductivity varies with the length approximately in the range of 24-34 W/m.K but exhibits insensitivity to the diameter and chirality. Besides, silicene nanotubes consisting of the grain boundary exhibit nearly 30% lower thermal conductivity compared with pristine ones. We discuss the underlying mechanism for the conductivity suppression of the system consisting of the grain boundary by calculating the phonon power spectral density. We find that by increasing the defect concentration and temperature, the thermal conductivity of the system decreases desirably. Moreover, for strained nanotubes, we observe unexpected changes in the thermal conductivity, so that the conductivity first increases significantly with tensile strain and then starts to decrease. The maximum thermal conductivity for the armchair and zigzag edge tubes appears at the strains about 3% and 5%, respectively, which is about 28% more than that of the unstrained structure.

physics.comp-ph↗

arXiv2019

Thermal transport across grain boundaries in polycrystalline silicene: a multiscale modeling

During the fabrication process of large scale silicene through common chemical vapor deposition (CVD) technique, polycrystalline films are quite likely to be produced, and the existence of Kapitza thermal resistance along grain boundaries could result in substantial changes of their thermal properties. In the present study, the thermal transport along polycrystalline silicene was evaluated by performing a multiscale method. Non-equilibrium molecular dynamics simulations (NEMD) was carried out to assess the interfacial thermal resistance of various constructed grain boundaries in silicene as well as to examine the effects of tensile strain and the mean temperature on the interfacial thermal resistance. In the following stage, the effective thermal conductivity of polycrystalline silicene was investigated considering the effects of grain size and tensile strain. Our results indicate that the average values of Kapitza conductance at grain boundaries at room temperature were estimated nearly 2.56*10^9 W/m2K and 2.46*10^9 W/m2K through utilizing Tersoff and Stillinger-Weber interatomic potentials, respectively. Also, in spite of the mean temperature whose increment does not change Kapitza resistance, the interfacial thermal resistance can be controlled by applying strain. Furthermore, it was found that, by tuning the grain size of polycrystalline silicene, its thermal conductivity can be modulated up to one order of magnitude.

physics.comp-ph↗

arXiv2017

Inter-layer and Intra-layer Heat Transfer in Bilayer/Monolayer Graphene van der Waals Heterostructure: Is There a Kapitza Resistance Analogous?

Van der Waals heterostructures have exhibited interesting physical properties. In this paper, heat transfer in hybrid coplanar bilayer/monolayer (BL-ML) graphene, as a model layered van der Waals heterostructure, was studied using non-equilibrium molecular dynamics (MD) simulations. Temperature profile and inter- and intra-layer heat fluxes of the BL-ML graphene indicated that, there is no fully developed thermal equilibrium between layers and the drop in average temperature profile at the step-like BL-ML interface is not attributable to the effect of Kapitza resistance. By increasing the length of the system up to 1 $μ$m in the studied MD simulations, the thermally non-equilibrium region was reduced to a small area near the step-like interface. All MD results were compared to a continuum model and a good match was observed between the two approaches. Our results provide a useful understanding of heat transfer in nano- and micro-scale layered 2D materials and van der Waals heterostructures.

cond-mat.mtrl-sci↗

arXiv2013

Phonon Heat Conduction in Corrugated Silicon Nanowires Below the Casimir Limit

The thermal conductance of straight and corrugated monocrystalline silicon nanowires has been measured between 0.3 K and 5 K. The difference in the thermal transport between corrugated nanowires and straight ones demonstrates a strong reduction in the mean free path of the phonons. This averaged mean free path is remarkably smaller than the smaller diameter of the nanowire, evidencing a phonon thermal transport reduced below the Casimir limit. Monte Carlo simulations highlight that this effect can be attributed to significant multiple scattering of ballistic phonons occuring on the corrugated surfaces. This result suggests an original approach to transforming a monocrystalline material into a phonon glass.

cond-mat.mes-hall↗