arXiv subjects

Anand Sivaramakrishnan

Publications and source records attributed to Anand Sivaramakrishnan.

At least 19 recordsLinked to original sources

arXiv2026

A Candidate Innermost Fifth Planet In the HR 8799 System Revealed By JWST NIRISS Aperture Masking Interferometry

We detect a candidate fifth planet in the HR 8799 system, directly imaged with the JWST/NIRISS Aperture Masking Interferometer (AMI). The detected source lies just above a $3σ$ contrast curve at a contrast of $\sim2\times10^{-4}$ in the F380M filter at a projected separation of $\sim150$ mas, corresponding to a few-to-several Jupiter mass planet at an orbital radius of $\sim 7$au. The separation of the candidate is compatible with absolute proper-motion constraints from Gaia and Hipparcos assuming it is bound, while its orbital position lies near a stable orbital solution of a fifth planet in a 3:1 mean motion resonance with planet e. This detection was made possible by a new JWST/NIRISS AMI data pipeline that reaches the photon noise limited potential of AMI by accounting for the optical and electronic systematics that limited sensitivity in prior analyses. Confirmation of this candidate would make HR 8799 the first directly imaged five-planet system and provide insight into the orbital dynamics and the dynamical evolution of planetary systems with widely-separated gas giants.

astro-ph.EP↗

arXiv2026

Calibration of an Analog-to-Digital Conversion Nonlinearity in JWST/NIRISS

We quantify an unusual flux-dependent systematic which is periodic in raw counts in flight data from the James Webb Space Telescope's Near Infrared Imager and Slitless Spectrograph (JWST/NIRISS), used extensively for exoplanet imaging and spectroscopy. Originally discovered in the aperture masking interferometry (AMI) mode, it also manifests in the Single Object Slitless Spectroscopy (SOSS) mode with the same dominant period of 1024 in raw analog-to-digital units (ADU). The likely cause of the signal is an analog-to-digital converter (ADC) integral nonlinearity (INL) in which case it will apply to all observations taken with the NIRISS instrument. Fortunately, it is straightforward to correct the data in postprocessing. The periodic INL is shown to be flux-dependent, increasing in amplitude with higher pixel counts on the detector. We derive a model of this periodic INL by fitting a combination of a polynomial and sinusoid multiplied with the residuals of ramp fits to the uncalibrated data and find an amplitude of 125ppm, up to a 2.5-count shift for a pixel with 20,000ADU. We apply this model to correct the well-studied NIRISS SOSS Program ERS1366 dataset of WASP-39b and reduce the data into a transmission spectrum. We find that our corrected transmission spectrum removes the INL systematic from the uncorrected spectrum at the 30ppm level across both orders, and also corrects a 55ppm offset between Order 1 and Order 2. We recommend a larger scale data-driven calibration of the periodic INL and the adoption of the outcome into NIRISS data pipelines.

astro-ph.IM↗

arXiv2026

AMIGO: a Data-Driven Calibration of the JWST Interferometer

The James Webb Space Telescope (JWST) hosts a non-redundant Aperture Masking Interferometer (AMI) in its Near Infrared Imager and Slitless Spectrograph (NIRISS) instrument, providing the only dedicated interferometric facility aboard - magnitudes more precise than any interferometric experiment previously flown. However, the performance of AMI (and other high resolution approaches such as kernel phase) in recovery of structure at high contrasts has not met design expectations. A major contributing factor has been the presence of uncorrected detector systematics, notably charge migration effects in the H2RG sensor, and insufficiently accurate mask metrology. Here we present Amigo, a data-driven calibration framework and analysis pipeline that forward-models the full JWST AMI system - including its optics, detector physics, and readout electronics - using an end-to-end differentiable architecture implemented in the Jax framework and in particular exploiting the dLux optical modelling package. Amigo directly models the generation of up-the-ramp detector reads, using an embedded neural sub-module to capture non-linear charge redistribution effects, enabling the optimal extraction of robust observables, for example kernel amplitudes and phases, while mitigating systematics such as the brighter-fatter effect. We demonstrate Amigo's capabilities by recovering the ABDor AC binary from commissioning data with high-precision astrometry, and detecting both HD206893B and the inner substellar companion HD206893c: a benchmark requiring contrasts approaching 10 magnitudes at separations of only 100 mas. These results exceed outcomes from all published pipelines, and re-establish AMI as a viable competitor for imaging at high contrast at the diffraction limit. Amigo is publicly available as open-source software community resource.

astro-ph.IM↗

arXiv2026

Image reconstruction with the JWST Interferometer

Flying on board the James Webb Space Telescope (JWST) above Earth's turbulent atmosphere, the Aperture Masking Interferometer (AMI) on the NIRISS instrument is the highest-resolution infrared interferometer ever placed in space. However, its performance was found to be limited by non-linear detector systematics, particularly charge migration - or the Brighter-Fatter Effect. Conventional interferometric Fourier observables are degraded by non-linear transformations in the image plane, with the consequence that the inner working angle and contrast limits of AMI were seriously compromised. Building on the end-to-end differentiable model & calibration code amigo, we here present a regularised maximum-likelihood image reconstruction framework dorito which can deconvolve AMI images either in the image plane or from calibrated Fourier observables, achieving high angular resolution and contrast over a wider field of view than conventional interferometric limits. This modular code by default includes regularisation by maximum entropy, and total variation defined with $l_1$ or $l_2$ metrics. We present imaging results from dorito for three benchmark imaging datasets: the volcanoes of Jupiter's moon Io, the colliding-wind binary dust nebula WR 137 and the archetypal Seyfert 2 active galactic nucleus NGC 1068. In all three cases we recover images consistent with the literature at diffraction-limited resolutions. The performance, limitations, and future opportunities enabled by amigo for AMI imaging (and beyond) are discussed.

astro-ph.IM↗

arXiv2025

HD 143811 AB b: A Directly Imaged Planet Orbiting a Spectroscopic Binary in Sco-Cen

We present confirmation of HD 143811 AB b, a substellar companion to spectroscopic binary HD 143811 AB through direct imaging with the Gemini Planet Imager (GPI) and Keck NIRC2. HD 143811 AB was observed as a part of the Gemini Planet Imager Exoplanet Survey (GPIES) in 2016 and 2019 and is a member of the Sco-Cen star formation region. The exoplanet is detected $\sim 430$ mas from the host star by GPI. With two GPI epochs and one from Keck/NIRC2 in 2022, we confirm through common proper motion analysis that the object is bound to its host star. We derive an orbit with a semi-major axis of $64 ^{+32}_{-14}$ au and eccentricity ${0.23 ^{+0.24}_{-0.16}}$. Spectral analysis of the GPI $H$-band spectrum and NIRC2 \textit{L'} photometry provides additional proof that this object is a substellar companion. We compare the spectrum of HD 143811 AB b to PHOENIX stellar models and Exo-REM exoplanet atmosphere models and find that Exo-REM models provide the best fits to the data. From the Exo-REM models, we derive an effective temperature of $1042^{+178}_{-132}$ K for the planet and translate the derived luminosity of the planet to a mass of $5.6 \pm 1.1~M_\textrm{Jup}$ assuming hot-start evolutionary models. HD 143811 AB b is the first directly imaged planet around a binary that is not on an ultra-wide orbit. Future characterization of this object will shed light on the formation of planets around binary star systems.

astro-ph.EP↗

arXiv2025

Characterization of the Host Binary of the Directly Imaged Exoplanet HD 143811 AB b

HD~143811~AB is the host star to the directly imaged planet HD~143811~AB~b, which was recently discovered using data from the Gemini Planet Imager and Keck NIRC2. A member of the Sco-Cen star-forming region with an age of $13 \pm 4$ Myr, HD~143811~AB is somewhat rare among hosts of directly imaged planets as it is a close stellar binary, with an $\sim$18 day period. Accurate values for the orbital and stellar parameters of this binary are needed to understand the formation and evolutionary history of the planet in orbit. We utilize archival high-resolution spectroscopy from FEROS on the MPG/ESO 2.2-meter telescope to fit the orbit of the binary, and combine with unresolved photometry to derive the basic stellar properties of the system. From the orbit, we derive precise values of orbital period of $18.59098 \pm 0.00007$ days, and mass ratio of $0.885 \pm 0.003$. When combined with stellar evolutionary models, we find masses of both components of $M_A = 1.30^{+0.03}_{-0.05}$ M$_\odot$ and $M_B = 1.15^{+0.03}_{-0.04}$ M$_\odot$. While the current data are consistent with the planet and stellar orbits being coplanar, the 3D orientations of both systems are currently poorly constrained, with additional observations required to more rigorously test for coplanarity.

astro-ph.EP↗

arXiv2025

Wavefront Error Recovery and Companion Identification with the James Webb Space Telescope

The James Webb Space Telescope is orders of magnitude more sensitive than any other facility across the near to mid-infrared wavelengths. Many approved programs take advantage of its highly stable point spread function (PSF) to directly detect faint companions using diverse high-contrast imaging (HCI) techniques. However, periodic re-phasing of the Optical Telescope Element (OTE) is required due to slow thermal drifts distorting to the primary mirror backplane along with stochastic tilt events on individual mirror segments. Many programs utilize observations of a reference star to remove the stellar contribution within an image which can typically take half of the total allocated time. We present a high-contrast imaging technique for the NIRISS instrument that uses the measured wavefront error (WFE) from a phase calibration observation (performed roughly every 48 hours) as prior information in a Bayesian analysis with nested sampling. This technique estimates the WFE of a given observation and simultaneously searches for faint companions, without using a reference star. We estimate the wavefront error for both full aperture and aperture masking interferometry (AMI) imaging modes using three low order Zernike coefficients per mirror segment, using the Hexike basis, to generate synthetic PSFs and compare to simulations. We compare our technique to traditional interferometric analysis in realistic NIRISS F430M simulations both relative to the photon noise limit, and through recovering an injected companion with $Δ$F430M= 8 mag at 0.2''. With future testing, this technique may save significant amounts of observing time given the results of our current implementation on NIRISS simulations.

astro-ph.IM↗

arXiv2025

JWST 1.5 μm and 4.8 μm Photometry of Y Dwarfs

Brown dwarfs lack nuclear fusion and cool with time; the coldest known have an effective temperature below 500 K, and are known as Y dwarfs. We present a James Webb Space Telescope (JWST) photometric dataset of Y dwarfs: twenty-three were imaged in wide-field mode, 20 using NIRCam with the F150W and F480M filters, and 3 using NIRISS with the F480M filter. We present an F480M vs. F150W $-$ F480M color-magnitude diagram for our sample, and other brown dwarfs with F150W and F480M colors synthesized from JWST spectra by Beiler et al. (2024). For one target, WISEA J083011.95$+$283716.0, its detection in the near-infrared confirms it as one of the reddest Y dwarfs known, with F150W $-$ F480M $= 9.62$ mag. We provide its updated parallax and proper motion. One of the Beiler et al. Y dwarfs, CWISEP J104756.81+545741.6, is unusually blue, consistent with strong CO absorption seen in its spectrum which the F480M filter is particularly sensitive to. The strong CO and the kinematics of the object suggest it may be very low-mass and young. We update the resolved photometry for the close binary system WISE J033605.05$-$014350.4 AB, and find that the secondary is almost as cold as WISE 085510.83$-$071442.5, with $T_{\rm eff} \lesssim 300$ K, however the F150W $-$ F480M color is significantly bluer, possibly suggesting the presence of water clouds. Astrometry is measured at the JWST epoch for the sample which is consistent with parallax and proper motion values reported by Kirkpatrick et al. (2021) and Marocco et al. (in prep).

astro-ph.SR↗

arXiv2024

The James Webb Interferometer: Space-based interferometric detections of PDS 70 b and c at 4.8 $μ$m

We observed the planet-hosting system PDS 70 with the James Webb Interferometer, JWST's Aperture Masking Interferometric (AMI) mode within NIRISS. Observing with the F480M filter centered at 4.8 $μ$m, we simultaneously fit geometrical models to the outer disk and the two known planetary companions. We re-detect the protoplanets PDS 70 b and c at an SNR of 14.7 and 7.0, respectively. Our photometry of both PDS 70 b and c provides tentative evidence of mid-IR circumplanetary disk emission through fitting SED models to these new measurements and those found in the literature. We also newly detect emission within the disk gap at an SNR of $\sim$4, at a position angle of $220^{+10}_{-15}$ degrees, and an unconstrained separation within $\sim$200 mas. Follow-up observations will be needed to determine the nature of this emission. We place a 5$σ$ upper limit of 208 $\pm$ 10 $μ$Jy on the flux of the candidate PDS 70 d at 4.8 $μ$m, which indicates that if the previously observed emission at shorter wavelengths is due to a planet, this putative planet has a different atmospheric composition than PDS 70 b or c. Finally, we place upper limits on emission from any additional planets in the disk gap. We find an azimuthally averaged 5$σ$ contrast upper limit $>$7 magnitudes at separations greater than 110 mas. These are the deepest limits to date within $\sim$250 mas at 4.8 $μ$m and the first space-based interferometric observations of this system.

astro-ph.EP↗

arXiv2024

High-contrast imager for complex aperture telescopes (HiCAT): 8. Dark zone demonstration with simultaneous closed-loop low-order wavefront sensing and control

We present recent laboratory results demonstrating high-contrast coronagraphy for the future space-based large IR/Optical/Ultraviolet telescope recommended by the Decadal Survey. The High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed aims to implement a system-level hardware demonstration for segmented aperture coronagraphs with wavefront control. The telescope hardware simulator employs a segmented deformable mirror with 37 hexagonal segments that can be controlled in piston, tip, and tilt. In addition, two continuous deformable mirrors are used for high-order wavefront sensing and control. The low-order sensing subsystem includes a dedicated tip-tilt stage, a coronagraphic target acquisition camera, and a Zernike wavefront sensor that is used to measure and correct low-order aberration drifts. We explore the performance of a segmented aperture coronagraph both in static operations (limited by natural drifts and instabilities) and in dynamic operations (in the presence of artificial wavefront drifts added to the deformable mirrors), and discuss the estimation and control strategies used to reach and maintain the dark-zone contrast using our low-order wavefront sensing and control. We summarize experimental results that quantify the performance of the testbed in terms of contrast, inner/outer working angle and bandpass, and analyze limiting factors.

astro-ph.IM↗

arXiv2024

High-contrast imager for complex aperture telescopes (HiCAT): 11. System-level demonstration of the Apodized Pupil Lyot Coronagraph with a segmented aperture in air

We present the final results of the Apodized Pupil Lyot Coronagraph (APLC) on the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed, under NASA's Strategic Astrophysics Technology program. The HiCAT testbed was developed over the past decade to enable a system-level demonstration of coronagraphy for exoplanet direct imaging with the future Habitable Wolds Observatory. HiCAT includes an active, segmented telescope simulator, a coronagraph, and metrology systems (Low-order and Mid-Order Zernike Wavefront Sensors, and Phase Retrieval camera). These results correspond to an off-axis (un-obscured) configuration, as was envisioned in the 2020 Decadal Survey Recommendations. Narrowband and broadband dark holes are generated using two continuous deformable mirrors (DM) to control high order wavefront aberrations, and low-order drifts can be further stabilized using the LOWFS loop. The APLC apodizers, manufactured using carbon nanotubes, were optimized for broadband performance and include the calibrated geometric aperture. HiCAT is, to this date, the only testbed facility able to demonstrate high-contrast coronagraphy with a truly segmented aperture, as is required for the Habitable World Observatory, albeit limited to ambient conditions. Results presented here include $6\times 10^{-8}$ (90% CI) contrast in 9% bandpass in a 360 deg dark hole with inner and outer working angles of $4.4 λ/D_{pupil}$ and $11 λ/D_{pupil}$ . Narrowband contrast (3% bandpass) reaches $2.4\times 10^{-8}$ (90% confidence interval).

astro-ph.IM↗

arXiv2024

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems IV: NIRISS Aperture Masking Interferometry Performance and Lessons Learned

We present a performance analysis for the aperture masking interferometry (AMI) mode on board the James Webb Space Telescope Near Infrared Imager and Slitless Spectrograph (JWST/NIRISS). Thanks to self-calibrating observables, AMI accesses inner working angles down to and even within the classical diffraction limit. The scientific potential of this mode has recently been demonstrated by the Early Release Science (ERS) 1386 program with a deep search for close-in companions in the HIP 65426 exoplanetary system. As part of ERS 1386, we use the same data set to explore the random, static, and calibration errors of NIRISS AMI observables. We compare the observed noise properties and achievable contrast to theoretical predictions. We explore possible sources of calibration errors and show that differences in charge migration between the observations of HIP 65426 and point-spread function calibration stars can account for the achieved contrast curves. Lastly, we use self-calibration tests to demonstrate that with adequate calibration NIRISS F380M AMI can reach contrast levels of $\sim9-10$ mag at $\gtrsim λ/D$. These tests lead us to observation planning recommendations and strongly motivate future studies aimed at producing sophisticated calibration strategies taking these systematic effects into account. This will unlock the unprecedented capabilities of JWST/NIRISS AMI, with sensitivity to significantly colder, lower-mass exoplanets than lower-contrast ground-based AMI setups, at orbital separations inaccessible to JWST coronagraphy.

astro-ph.EP↗

arXiv2023

A First Look with JWST Aperture Masking Interferometry (AMI): Resolving Circumstellar Dust around the Wolf-Rayet Binary WR 137 beyond the Rayleigh Limit

We present infrared aperture masking interferometry (AMI) observations of newly formed dust from the colliding winds of the massive binary system Wolf-Rayet (WR) 137 with JWST using the Near Infrared Imager and Slitless Spectrograph (NIRISS). NIRISS AMI observations of WR 137 and a point-spread-function calibrator star, HD~228337, were taken using the F380M and F480M filters in 2022 July and August as part of the Director's Discretionary Early Release Science (DD-ERS) program 1349. Interferometric observables (squared visibilities and closure phases) from the WR 137 "interferogram" were extracted and calibrated using three independent software tools: ImPlaneIA, AMICAL, and SAMpip. The analysis of the calibrated observables yielded consistent values except for slightly discrepant closure phases measured by ImPlaneIA. Based on all three sets of calibrated observables, images were reconstructed using three independent software tools: BSMEM, IRBis, and SQUEEZE. All reconstructed image combinations generated consistent images in both F380M and F480M filters. The reconstructed images of WR 137 reveal a bright central core with a $\sim300$ mas linear filament extending to the northwest. A geometric colliding-wind model with dust production constrained to the orbital plane of the binary system and enhanced as the system approaches periapsis provided a general agreement with the interferometric observables and reconstructed images. Based on a colliding-wind dust condensation analysis, we suggest that dust formation within the orbital plane of WR 137 is induced by enhanced equatorial mass-loss from the rapidly rotating O9 companion star, whose axis of rotation is aligned with that of the orbit.

astro-ph.SR↗

arXiv2023

The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope -- III. Single Object Slitless Spectroscopy

The Near Infrared Imager and Slitless Spectrograph instrument (NIRISS) is the Canadian Space Agency (CSA) contribution to the suite of four science instruments of JWST. As one of the three NIRISS observing modes, the Single Object Slitless Spectroscopy (SOSS) mode is tailor-made to undertake time-series observations of exoplanets to perform transit spectroscopy. The SOSS permits observing point sources between 0.6 and 2.8 um at a resolving power of 650 at 1.25 um using a slit-less cross-dispersing grism while its defocussing cylindrical lens enables observing targets as bright as J=6.7 by spreading light across 23 pixels along the cross-dispersion axis. This paper officially presents the design of the SOSS mode, its operation, characterization, and its performance, from ground-based testing and flight-based Commissioning. On-sky measurements demonstrate a peak photon conversion efficiency of 55% at 1.2 um. The first time-series on the A-type star BD+60o1753 achieves a flux stability close to the photon-noise limit, so far tested to a level of 20 parts per million on 40-minute time-scales after simply subtracting a long-term trend. Uncorrected 1/f noise residuals underneath the spectral traces add an extra source of noise equivalent to doubling the readout noise. Preliminary analysis of a HAT-P-14b transit time-series indicates that it is difficult to remove all the noise in pixels with partially saturated ramps. Overall, the SOSS delivers performance at the level required to tackle key exoplanet science programs such as detecting secondary atmospheres on terrestrial planets and measuring abundances of several chemical species in gas giants.

astro-ph.IM↗

arXiv2023

The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope -- I. Instrument Overview and in-Flight Performance

The Near-Infrared Imager and Slitless Spectrograph (NIRISS) is the science module of the Canadian-built Fine Guidance Sensor (FGS) onboard the James Webb Space Telescope (JWST). NIRISS has four observing modes: 1) broadband imaging featuring seven of the eight NIRCam broadband filters, 2) wide-field slitless spectroscopy (WFSS) at a resolving power of $\sim$150 between 0.8 and 2.2 $μ$m, 3) single-object cross-dispersed slitless spectroscopy (SOSS) enabling simultaneous wavelength coverage between 0.6 and 2.8 $μ$m at R$\sim$700, a mode optimized for exoplanet spectroscopy of relatively bright ($J<6.3$) stars and 4) aperture masking interferometry (AMI) between 2.8 and 4.8 $μ$m enabling high-contrast ($\sim10^{-3}-10^{-4}$) imaging at angular separations between 70 and 400 milliarcsec for relatively bright ($M<8$) sources. This paper presents an overview of the NIRISS instrument, its design, its scientific capabilities, and a summary of in-flight performance. NIRISS shows significantly better response shortward of $\sim2.5\,μ$m resulting in 10-40% sensitivity improvement for broadband and low-resolution spectroscopy compared to pre-flight predictions. Two time-series observations performed during instrument commissioning in the SOSS mode yield very stable spectro-photometry performance within $\sim$10% of the expected noise. The first space-based companion detection of the tight binary star AB Dor AC through AMI was demonstrated.

astro-ph.IM↗

arXiv2023

JWST/NIRCam discovery of the first Y+Y brown dwarf binary: WISE J033605.05$-$014350.4

We report the discovery of the first brown dwarf binary system with a Y dwarf primary, WISE J033605.05$-$014350.4, observed with NIRCam on JWST with the F150W and F480M filters. We employed an empirical point spread function binary model to identify the companion, located at a projected separation of 84 milliarcseconds, position angle of 295 degrees, and with contrast of 2.8 and 1.8 magnitudes in F150W and F480M, respectively. At a distance of 10$\,$pc based on its Spitzer parallax, and assuming a random inclination distribution, the physical separation is approximately 1$\,$au. Evolutionary models predict for that an age of 1-5 Gyr, the companion mass is about 4-12.5 Jupiter masses around the 7.5-20 Jupiter mass primary, corresponding to a companion-to-host mass fraction of $q=0.61\pm0.05$. Under the assumption of a Keplerian orbit the period for this extreme binary is in the range of 5-9 years. The system joins a small but growing sample of ultracool dwarf binaries with effective temperatures of a few hundreds of Kelvin. Brown dwarf binaries lie at the nexus of importance for understanding the formation mechanisms of these elusive objects, as they allow us to investigate whether the companions formed as stars or as planets in a disk around the primary.

astro-ph.SR↗

arXiv2023

Testing the Interaction Between a Substellar Companion and a Debris Disk in the HR 2562 System

The HR 2562 system is a rare case where a brown dwarf companion resides in a cleared inner hole of a debris disk, offering invaluable opportunities to study the dynamical interaction between a substellar companion and a dusty disk. We present the first ALMA observation of the system as well as the continued GPI monitoring of the companion's orbit with 6 new epochs from 2016 to 2018. We update the orbital fit and, in combination with absolute astrometry from GAIA, place a 3$σ$ upper limit of 18.5 $M_J$ on the companion's mass. To interpret the ALMA observations, we used radiative transfer modeling to determine the disk properties. We find that the disk is well resolved and nearly edge on. While the misalignment angle between the disk and the orbit is weakly constrained due to the short orbital arc available, the data strongly support a (near) coplanar geometry for the system. Furthermore, we find that the models that describe the ALMA data best have an inner radius that is close to the companion's semi-major axis. Including a posteriori knowledge of the system's SED further narrows the constraints on the disk's inner radius and place it at a location that is in reasonable agreement with, possibly interior to, predictions from existing dynamical models of disk truncation by an interior substellar companion. HR\,2562 has the potential over the next few years to become a new testbed for dynamical interaction between a debris disk and a substellar companion.

astro-ph.EP↗

arXiv2023

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems: Best Practices for Data Collection in Cycle 2 and Beyond

We present a set of recommended best practices for JWST data collection for members of the community focussed on the direct imaging and spectroscopy of exoplanetary systems. These findings and recommendations are based on the early analysis of the JWST Early Release Science Program 1386, "High-Contrast Imaging of Exoplanets and Exoplanetary Systems with JWST." Our goal is for this information to be useful for observers in preparation of JWST proposals for Cycle 2 and beyond. In addition to compiling a set of best practices from our ERS program, in a few cases we also draw on the expertise gained within the instrument commissioning programs, as well as include a handful of data processing best practices. We anticipate that this document will be regularly updated and resubmitted to arXiv.org to ensure that we have distributed our knowledge of best-practices for data collection as widely and efficiently as possible.

astro-ph.IM↗