The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope -- I. Instrument Overview and in-Flight Performance

Abstract

The Near-Infrared Imager and Slitless Spectrograph (NIRISS) is the science module of the Canadian-built Fine Guidance Sensor (FGS) onboard the James Webb Space Telescope (JWST). NIRISS has four observing modes: 1) broadband imaging featuring seven of the eight NIRCam broadband filters, 2) wide-field slitless spectroscopy (WFSS) at a resolving power of $\sim$150 between 0.8 and 2.2 $\mu$m, 3) single-object cross-dispersed slitless spectroscopy (SOSS) enabling simultaneous wavelength coverage between 0.6 and 2.8 $\mu$m at R$\sim$700, a mode optimized for exoplanet spectroscopy of relatively bright ($J<6.3$) stars and 4) aperture masking interferometry (AMI) between 2.8 and 4.8 $\mu$m enabling high-contrast ($\sim10^{-3}-10^{-4}$) imaging at angular separations between 70 and 400 milliarcsec for relatively bright ($M<8$) sources. This paper presents an overview of the NIRISS instrument, its design, its scientific capabilities, and a summary of in-flight performance. NIRISS shows significantly better response shortward of $\sim2.5\,\mu$m resulting in 10-40% sensitivity improvement for broadband and low-resolution spectroscopy compared to pre-flight predictions. Two time-series observations performed during instrument commissioning in the SOSS mode yield very stable spectro-photometry performance within $\sim$10% of the expected noise. The first space-based companion detection of the tight binary star AB Dor AC through AMI was demonstrated.