arXiv subjects

Andrea Ferretti

Publications and source records attributed to Andrea Ferretti.

At least 37 records · Page 2Linked to original sources

arXiv2021

Quantum ESPRESSO toward the exascale

Quantum ESPRESSO is an open-source distribution of computer codes for quantum-mechanical materials modeling, based on density-functional theory, pseudopotentials, and plane waves, and renowned for its performance on a wide range of hardware architectures, from laptops to massively parallel computers, as well as for the breadth of its applications. In this paper we present a motivation and brief review of the ongoing effort to port Quantum ESPRESSO onto heterogeneous architectures based on hardware accelerators, which will overcome the energy constraints that are currently hindering the way towards exascale computing.

physics.comp-ph↗

arXiv2021

Narrowing of d bands of FeCo layers intercalated under graphene

We report on the electronic properties of an artificial system obtained by the intercalation of equiatomic FeCo layers under graphene grown on Ir(111). Upon intercalation, the FeCo film grows epitaxially on Ir(111), resulting in a lattice-mismatched system. By performing Density Functional Theory calculations, we show that the intercalated FeCo layer leads to a pronounced corrugation of the graphene film. At the same time, the FeCo intercalated layers induce a clear transition from a nearly undisturbed to a strongly hybridized graphene π-band, as measured by angle-resolved photoemission spectroscopy. A comparison of experimental results with the computed band structure and the projected density of states unveils a spin-selective hybridization between the π band of graphene and FeCo-3d states. Our results demonstrate that the reduced dimensionality, as well as the hybridization within the FeCo layers, induce a narrowing and a clear splitting of Fe 3d-up and Fe 3d-down spin bands of the confined FeCo layers with respect to bulk Fe and Co.

cond-mat.mtrl-sci↗

arXiv2021

Magnetic response and electronic states of well defined Graphene/Fe/Ir(111) heterostructure

We investigate a well defined heterostructure constituted by magnetic Fe layers sandwiched between graphene (Gr) and Ir(111). The challenging task to avoid Fe-C solubility and Fe-Ir intermixing has been achieved with atomic controlled Fe intercalation at moderate temperature below 500 K. Upon intercalation of a single ordered Fe layer in registry with the Ir substrate, an intermixing of the Gr bands and Fe d states breaks the symmetry of the Dirac cone, with a downshift in energy of the apex by about 3 eV, and well-localized Fe intermixed states induced in the energy region just below the Fermi level. First principles electronic structure calculations show a large spin splitting of the Fe states, resulting in a majority spin channel almost fully occupied and strongly hybridized with Gr π states. X-ray magnetic circular dichroism on the Gr/Fe/Ir heterostructure reveals an ordered spin configuration with a ferromagnetic response of Fe layer(s), with enhanced spin and orbital configurations with respect to the bcc-Fe bulk values. The magnetization switches from a perpendicular easy magnetization axis when the Fe single layer is lattice matched with the Ir(111) surface to a parallel one when the Fe thin film is almost commensurate with graphene.

cond-mat.mtrl-sci↗

arXiv2019

Electronic and optical properties of doped TiO2 by many-body perturbation theory

Doping is one of the most common strategies for improving the photocatalytic and solar energy conversion properties of TiO$_2$, hence an accurate theoretical description of the electronic and optical properties of doped TiO$_2$ is of both scientific and practical interest. In this work we use many-body perturbation theory techniques to investigate two typical n-type dopants, Niobium and Hydrogen, in TiO$_2$ rutile. Using the GW approximation to determine band edges and defect energy levels, and the Bethe Salpeter equation for the calculation of the absorption spectra, we find that the defect energy levels form non-dispersive bands %associated with localized states lying $\simeq 2.2 eV$ above the top of the corresponding valence bands ($\simeq 0.9 eV$ below the conduction bands of the {\it pristine} material). The defect states are also responsible for the appearance of low energy absorption peaks that enhance the solar spectrum absorption of rutile. The spatial distributions of the excitonic wavefunctions associated with these low energy excitations are very different for the two dopants, suggesting a larger mobility of photoexcited electrons in Nb-TiO$_2$.

cond-mat.mtrl-sci↗

arXiv2019

Intrinsic edge excitons in two-dimensional MoS$_2$

Using accurate first-principles calculations based on many-body perturbation theory we predict that two-dimensional MoS$_2$ hosts edge excitons with universal character, intrinsic to the existence of edges and lying well below the onset of bulk features. These excitons are largely insensitive to edge terminations or orientation, persisting even in the presence of metallic screening at zigzag edges, with large binding energies of $\sim$0.4 eV. Additional excitons can also emerge in ultranarrow ribbons, or as a function of the chemical nature of the termination. The chemical, structural, and electronic similarities with Se- or W-based transition-metal dichalcogenides suggest that these optical features could be common in this class of materials.

cond-mat.mes-hall↗

arXiv2019

Reproducibility in $G_0W_0$ Calculations for Solids

Ab initio many-body perturbation theory within the $GW$ approximation is a Green's function formalism widely used in the calculation of quasiparticle excitation energies of solids. In what has become an increasingly standard approach, Kohn-Sham eigenenergies, generated from a DFT calculation with a strategically-chosen exchange correlation functional ``starting point'', are used to construct $G$ and $W$, and then perturbatively corrected by the resultant $GW$ self-energy. In practice, there are several ways to construct the $GW$ self-energy, and these can lead to variations in predicted quasiparticle energies. For example, for ZnO and TiO$_2$, reported $GW$ fundamental gaps can vary by more than 1 eV. In this work, we address the convergence and key approximations in contemporary $G_0W_0$ calculations, including frequency-integration schemes and the treatment of the Coulomb divergence in the exact-exchange term. We study several systems,and compare three different $GW$ codes: BerkeleyGW, Abinit and Yambo. We demonstrate, for the first time, that the same quasiparticle energies for systems in the condensed phase can be obtained with different codes, and we provide a comprehensive assessment of implementations of the $GW$ approximation.

cond-mat.mtrl-sci↗

arXiv2018

Ferromagnetic and Antiferromagnetic Coupling of Spin Molecular Interfaces with High Thermal Stability

We report an advanced organic spin-interface architecture with magnetic remanence at room temperature, constituted by metal phthalocyanine molecules magnetically coupled with Co layer(s), mediated by graphene. Fe- and Cu-phthalocyanines assembled on graphene/Co have identical structural configurations, but FePc couples antiferromagnetically with Co up to room temperature, while CuPc couples ferromagnetically with weaker coupling and thermal stability, as deduced by element-selective X-ray magnetic circular dichroic signals. The robust antiferromagnetic coupling is stabilized by a superexchange interaction, driven by the out-of-plane molecular orbitals responsible of the magnetic ground state and electronically decoupled from the underlying metal via the graphene layer, as confirmed by ab initio theoretical predictions. These archetypal spin interfaces can be prototypes to demonstrate how antiferromagnetic and/or ferromagnetic coupling can be optimized by selecting the molecular orbital symmetry.

cond-mat.mtrl-sci↗

arXiv2018

Koopmans-compliant functionals and potentials and their application to the GW100 test-set

Koopmans-compliant (KC) functionals have been shown to provide accurate spectral properties through a generalized condition of piece-wise linearity of the total energy as a function of the fractional addition/removal of an electron to/from any orbital. We analyze the performance of different KC functionals on the GW100 test-set, comparing the ionization potentials (as opposite of the energy of the highest occupied orbital) of these 100 molecules to those obtained from CCSD(T) total energy differences, and experimental results, finding excellent agreement with a mean absolute error of 0.20 eV for the KIPZ functional, that is state-of-the-art for both DFT-based calculations and many-body perturbation theory. We highlight similarities and differences between KC functionals and other electronic-structure approaches, such as dielectric-dependent hybrid functionals and G$_0$W$_0$, both from a theoretical and from a practical point of view, arguing that Koopmans-compliant potentials can be considered as a local and orbital-dependent counterpart to the electronic GW self-energy, albeit already including approximate vertex corrections.

physics.comp-ph↗

arXiv2018

Probing optical excitations in chevron-like armchair graphene nanoribbons

The bottom-up fabrication graphene nanoribbons (GNRs) has opened new opportunities to specifically control their electronic and optical properties by precisely controlling their atomic structure. Here, we address excitations in GNRs with periodic structural wiggles, so-called Chevron GNRs. Based on reflectance difference and high-resolution electron energy loss spectroscopies together with ab-initio simulations, we demonstrate that their excited-state properties are dominated by strongly bound excitons. The spectral fingerprints corresponding to different reaction stages in their bottom-up fabrication are also unequivocally identified, allowing us to follow the exciton build-up from the starting monomer precursor to the final ribbon structure.

cond-mat.mtrl-sci↗

arXiv2018

Effects of spin-orbit coupling on the optical response of a material

We investigate the effects of spin-orbit coupling on the optical response of materials. In particular, we study the effects of the commutator between the spin-orbit coupling part of the potential and the position operator on the optical matrix elements. Using a formalism that separates a fullyrelativistic Kleinman-Bylander pseudopotential into the scalar-relativistic and spin-orbit-coupling parts, we calculate the contribution of the commutator arising from spin-orbit coupling to the squared optical matrix elements of isolated atoms, monolayer transition metal dichalcogenides, and topological insulators. In the case of isolated atoms from H ($Z = 1$) to Bi ($Z = 83$), the contribution of spin-orbit coupling to the squared matrix elements can be as large as 14 %. On the other hand, in the cases of monolayer transition metal dichalcogenides and topological insulators, we find that this contribution is less than 1 % and that it is sufficient to calculate the optical matrix elements and subsequent physical quantities without considering the commutator arising from spin-orbit coupling.

cond-mat.mtrl-sci↗

arXiv2018

FePc Adsorption on the Moiré Superstructure of Graphene Intercalated with a Co Layer

The moiré superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moiré pattern) is performed here by density functional theory, which provides an accurate description of the template as a function of the corrugation parameters. The theoretical results are a preliminary step to describe the interaction process of the FePc molecules adsorption on the Gr/Co system. Core level photoemission and absorption spectroscopies have been employed to control the preferential adsorption regions of the FePc on the graphene moiré superstructure and the interaction of the central Fe ion with the underlying Co. Our results show that upon molecular adsorption the distance of C atoms from the Co template mainly drives the strength of the molecules-substrate interaction, thereby allowing for locally different electronic properties within the corrugated interface.

cond-mat.mtrl-sci↗

arXiv2018

Bright electroluminescence from single graphene nanoribbon junctions

Thanks to their highly tunable band gaps, graphene nanoribbons (GNRs) with atomically precise edges are emerging as mechanically and chemically robust candidates for nanoscale light emitting devices of modulable emission color. While their optical properties have been addressed theoretically in depth, only few experimental studies exist, limited to ensemble measurements and without any attempt to integrate them in an electronic-like circuit. Here we report on the electroluminescence of individual GNRs suspended between the tip of a scanning tunneling microscope (STM) and a Au(111) substrate, constituting thus a realistic opto-electronic circuit. Emission spectra of such GNR junctions reveal a bright and narrow band emission of red light, whose energy can be tuned with the bias voltage applied to the junction, but always lying below the gap of infinite GNRs. Comparison with {\it ab initio} calculations indicate that the emission involves electronic states localized at the GNR termini. Our results shed light on unpredicted optical transitions in GNRs and provide a promising route for the realization of bright, robust and controllable graphene-based light emitting devices.

cond-mat.mes-hall↗

arXiv2017

Screening in orbital-density-dependent functionals

Electronic-structure functionals that include screening effects, such as Hubbard or Koopmans' functionals, require to describe the response of a system to the fractional addition or removal of an electron from an orbital or a manifold. Here, we present a general method to incorporate screening based on linear-response theory, and we apply it to the case of the orbital-by-orbital screening of Koopmans' functionals. We illustrate the importance of such generalization when dealing with challenging systems containing orbitals with very different chemical character, also highlighting the simple dependence of the screening on the localization of the orbitals. We choose a set of 46 transition-metal complexes for which experimental data and accurate many-body perturbation theory calculations are available. When compared to experiment, results for ionization potentials show a very good performance with a mean absolute error of $~0.2$ eV, comparable to the most accurate many-body perturbation theory approaches. These results reiterate the role of Koopmans' compliant functionals as simple and accurate quasiparticle approximations to the exact spectral functional, bypassing diagrammatic expansions and relying only on the physics of the local density or generalized-gradient approximation.

physics.comp-ph↗

arXiv2017

Koopmans-compliant spectral functionals for extended systems

Koopmans-compliant functionals have been shown to provide accurate spectral properties for molecular systems; this accuracy is driven by the generalized linearization condition imposed on each charged excitation - i.e. on changing the occupation of any orbital in the system, while accounting for screening and relaxation from all other electrons. In this work we discuss the theoretical formulation and the practical implementation of this formalism to the case of extended systems, where a third condition, the localization of Koopmans' orbitals, proves crucial to reach seamlessly the thermodynamic limit. We illustrate the formalism by first studying one-dimensional molecular systems of increasing length. Then, we consider the band gaps of 30 paradigmatic solid-state test cases, for which accurate experimental and computational results are available. The results are found to be comparable with the state-of-the-art in diagrammatic techniques (self-consistent many-body perturbation theory with vertex corrections), notably using just a functional formulation for spectral properties and the physics of the generalized-gradient approximation; when ionization potentials are compared, the results are roughly twice as accurate.

cond-mat.mtrl-sci↗

arXiv2017

Electronic Structure Evolution during the Growth of Graphene Nanoribbons on Au(110)

Surface-assisted polymerization of molecular monomers into extended chains can be used as the seed of graphene nanoribbon (GNR) formation, resulting from a subsequent cyclo-dehydrogenation process. By means of valence-band photoemission and ab-initio density-functional theory (DFT) calculations, we investigate the evolution of molecular states from monomer 10,10'-dibromo-9,9'bianthracene (DBBA) precursors to polyanthryl polymers, and eventually to GNRs, as driven by the Au(110) surface. The molecular orbitals and the energy level alignment at the metal-organic interface are studied in depth for the DBBA precursors deposited at room temperature. On this basis, we can identify a spectral fingerprint of C-Au interaction in both DBBA single-layer and polymerized chains obtained upon heating. Furthermore, DFT calculations help us evidencing that GNRs interact more strongly than DBBA and polyanthryl with the Au(110) substrate, as a result of their flatter conformation.

cond-mat.mtrl-sci↗

arXiv2017

Many-body correlations and coupling in benzene-dithiol junctions

Most theoretical studies of nanoscale transport in molecular junctions rely on the combination of the Landauer formalism with Kohn-Sham density functional theory (DFT) using standard local and semilocal functionals to approximate exchange and correlation effects. In many cases, the resulting conductance is overestimated with respect to experiments. Recent works have demonstrated that this discrepancy may be reduced when including many-body corrections on top of DFT. Here we study benzene-dithiol (BDT) gold junctions and analyze the effect of many-body perturbation theory (MBPT) on the calculation of the conductance with respect to different bonding geometries. We find that the many-body corrections to the conductance strongly depend on the metal-molecule coupling strength. In the BDT junction with the lowest coupling, many-body corrections reduce the overestimation on the conductance to a factor two, improving the agreement with experiments. In contrast, in the strongest coupling cases, many-body corrections on the conductance are found to be sensibly smaller and standard DFT reveals a valid approach.

cond-mat.mes-hall↗

arXiv2016

First-principles photoemission spectroscopy of DNA and RNA nucleobases from Koopmans-compliant functionals

The need to interpret ultraviolet photoemission data strongly motivates the refinement of first-principles techniques able to accurately predict spectral properties. In this work we employ Koopmans-compliant functionals, constructed to enforce piecewise linearity in approximate density functionals, to calculate the structural and electronic properties of DNA and RNA nucleobases. Our results show that not only ionization potentials and electron affinities are accurately predicted with mean absolute errors < 0.1 eV, but also that calculated photoemission spectra are in excellent agreement with experimental ultraviolet photoemission spectra. In particular, the role and contribution of different tautomers to the photoemission spectra are highlighted and discussed in detail. The structural properties of nucleobases are also investigated, showing an improved description with respect to local and semilocal density-functional theory. Methodologically, our results further consolidate the role of Koopmans-compliant functionals in providing, through orbital-density-dependent potentials, accurate electronic and spectral properties.

physics.chem-ph↗

arXiv2016

Accurate Tight-Binding Hamiltonians for 2D and Layered Materials

We present a scheme to controllably improve the accuracy of tight-binding Hamiltonian matrices derived by projecting the solutions of plane-wave ab initio calculations on atomic orbital basis sets. By systematically increasing the completeness of the basis set of atomic orbitals, we are able to optimize the quality of the band structure interpolation over wide energy ranges including unoccupied states. This methodology is applied to the case of interlayer and image states, which appear several eV above the Fermi level in materials with large interstitial regions or surfaces such as graphite and graphene. Due to their spatial localization in the empty regions inside or outside of the system, these states have been inaccessible to traditional tight-binding models and even to ab initio calculations with atom-centered basis functions.

cond-mat.mtrl-sci↗