Searcharxiv⌕ Search

arXiv subjects

Andrei V. Lavrinenko

Publications and source records attributed to Andrei V. Lavrinenko.

At least 37 records · Page 2Linked to original sources

Experimental Demonstration of Effective Medium Approximation Breakdown in Deeply Subwavelength All-Dielectric Multilayers

We experimentally demonstrate the effect of anomalous breakdown of the effective medium approximation in all-dielectric deeply subwavelength thickness ($d \simλ/160-λ/30$) multilayers, as recently predicted theoretically [H.H. Sheinfux et al., Phys. Rev. Lett. 113, 243901 (2014)]. Multilayer stacks are composed of alternating alumina and titania layers fabricated using atomic layer deposition. For light incident on such multilayers at angles near the total internal reflection we observe pronounced differences in the reflectance spectra for structures with 10-nm versus 20-nm thick layers, as well as for structures with different layers ordering, contrary to the predictions of the effective medium approximation. The reflectance difference can reach values up to 0.5, owing to the chosen geometrical configuration with an additional resonator layer employed for the enhancement of the effect. Our results are important for the development of new high-precision multilayer ellipsometry methods and schemes, as well as in a broad range of sensing applications.

physics.optics↗

Dark-field hyperlens: Super-resolution imaging of weakly scattering objects

We propose and numerically demonstrate a technique for subwavelength imaging based on a metal-dielectric multilayer hyperlens designed in such a way that only the large-wavevector waves are transmitted while all propagating waves from the image area are blocked by the hyperlens. As a result, the image plane only contains scattered light from subwavelength features of the objects and is free from background illumination. Similar in spirit to conventional dark-field microscopy, the proposed dark-field hyperlens is promising for optical imaging of weakly scattering subwavelength objects, such as optical nanoscopy of label-free biological objects.

physics.optics↗

Bismuth ferrite as low-loss switchable material for plasmonic waveguide modulator

We propose new designs of plasmonic modulators, which can be utilized for dynamic signal switching in photonic integrated circuits. We study performance of plasmonic waveguide modulator with bismuth ferrite as an active material. The bismuth ferrite core is sandwiched between metal plates (metal-insulator-metal configuration), which also serve as electrodes so that the core changes its refractive index under applied voltage by means of partial in-plane to out-of-plane reorientation of ferroelectric domains in bismuth ferrite. This domain switch results in changing of propagation constant and absorption coefficient, and thus either phase or amplitude control can be implemented. Efficient modulation performance is achieved because of high field confinement between the metal layers, as well as the existence of mode cut-offs for particular values of the core thickness, making it possible to control the signal with superior modulation depth. For the phase control scheme, π phase shift is provided by 0.8-μm length device having propagation losses 0.29 dB/μm. For the amplitude control, we predict up to 38 dB/μm extinction ratio with 1.2 dB/μm propagation loss. In contrast to previously proposed active materials, bismuth ferrite has nearly zero material losses, so bismuth ferrite based modulators do not bring about additional decay of the propagating signal.

physics.optics↗

Photonic band-gap engineering for volume plasmon polaritons in multiscale multilayer hyperbolic metamaterials

We theoretically study the propagation of large-wavevector waves (volume plasmon polaritons) in multilayer hyperbolic metamaterials with two levels of structuring. We show that when the parameters of a subwavelength metal-dielectric multilayer ("substructure") are modulated ("superstructured") on a larger, wavelength scale, the propagation of volume plasmon polaritons in the resulting multiscale hyperbolic metamaterials is subject to photonic band gap phenomena. A great degree of control over such plasmons can be exerted by varying the superstructure geometry. When this geometry is periodic, stop bands due to Bragg reflection form within the volume plasmonic band. When a cavity layer is introduced in an otherwise periodic superstructure, resonance peaks of the Fabry-Perot nature are present within the stop bands. More complicated superstructure geometries are also considered. For example, fractal Cantor-like multiscale metamaterials are found to exhibit characteristic self-similar spectral signatures in the volume plasmonic band. Multiscale hyperbolic metamaterials are shown to be a promising platform for large-wavevector bulk plasmonic waves, whether they are considered for use as a new kind of information carrier or for far-field subwavelength imaging.

physics.optics↗

Giant Photogalvanic Effect in Metamaterials Containing Non-Centrosymmetric Plasmonic Nanoparticles

Photoelectric properties of metamaterials containing non-centrosymmetric, similarly oriented metallic nanoparticles embedded in a homogeneous semiconductor matrix are theoretically studied. Due to the asymmetric shape of the nanoparticle boundary, photoelectron emission acquires a preferred direction, resulting in a photocurrent flow in that direction when nanoparticles are uniformly illuminated by a homogeneous plane wave. This effect is a direct analogy of the photogalvanic (or bulk photovoltaic) effect known to exist in media with non-centrosymmetric crystal structure, such as doped lithium niobate or bismuth ferrite, but is several orders of magnitude stronger. Termed the giant plasmonic photogalvanic effect, the reported phenomenon is valuable for characterizing photoemission and photoconductive properties of plasmonic nanostructures, and can find many uses for photodetection and photovoltaic applications.

physics.optics↗

From surface to volume plasmons in hyperbolic metamaterials: General existence conditions for bulk high-k waves in metal-dielectric and graphene-dielectric multilayers

We theoretically investigate general existence conditions for broadband bulk large-wavevector (high-k) propagating waves (such as volume plasmon polaritons in hyperbolic metamaterials) in subwavelength periodic multilayer structures. Describing the elementary excitation in the unit cell of the structure by a generalized resonance pole of a reflection coefficient, and using Bloch's theorem, we derive analytical expressions for the band of large-wavevector propagating solutions. We apply our formalism to determine the high-k band existence in two important cases: the well-known metal-dielectric, and recently introduced graphene-dielectric stacks. We confirm that short-range surface plasmons in thin metal layers can give rise to hyperbolic metamaterial properties, and demonstrate that long-range surface plasmons cannot. We also show that graphene-dielectric multilayers tend to support high-k waves and explore the range of parameters for which this is possible, confirming the prospects of using graphene for materials with hyperbolic dispersion. The approach is applicable to a large variety of structures, such as continuous or structured microwave, terahertz (THz) and optical metamaterials.

physics.optics↗

Enhanced electron photoemission by collective lattice resonances in plasmonic nanoparticle-array photodetectors and solar cells

We propose to use collective lattice resonances in plasmonic nanoparticle arrays to enhance photoelectron emission in Schottky-barrier photodetectors and solar cells. We show that the interaction of lattice resonances (the Rayleigh anomaly) and individual particle excitations (localized surface plasmon resonances) leads to stronger local field enhancement and significant increase of the photocurrent compared to the case when only individual particle excitations are present. The results can be used to design new photodetectors with highly selective, tunable spectral response, able to detect photons with the energy below the semiconductor bandgap, and to develop solar cells with increased efficiency.

physics.optics↗

Electron Photoemission in Plasmonic Nanoparticle Arrays: Analysis of Collective Resonances and Embedding Effects

We theoretically study the characteristics of photoelectron emission in plasmonic nanoparticle arrays. Nanoparticles are partially embedded in a semiconductor, forming Schottky barriers at metal/semiconductor interfaces through which photoelectrons can tunnel from the nanoparticle into the semiconductor; photodetection in the infrared range, where photon energies are below the semiconductor band gap (insufficient for band-to-band absorption in semiconductor), is therefore possible. The nanoparticles are arranged in a sparse rectangular lattice so that the wavelength of the lattice-induced Rayleigh anomalies can overlap the wavelength of the localized surface plasmon resonance of the individual particles, bringing about collective effects from the nanoparticle array. Using full-wave numerical simulations, we analyze the effects of lattice constant, embedding depth, and refractive index step between the semiconductor layer and an adjacent transparent conductive oxide layer. We show that the presence of refractive index mismatch between media surrounding the nanoparticles disrupts the formation of a narrow absorption peak associated with the Rayleigh anomaly, so the role of collective lattice effects in the formation of plasmonic resonance is diminished. We also show that 5 to 20-times increase of photoemission can be achieved on embedding of nanoparticles without taking into account dynamics of ballistic electrons. The results obtained can be used to increase efficiency of plasmon-based photodetectors and photovoltaic devices. The results may provide clues to designing an experiment where the contributions of surface and volume photoelectric effects to the overall photocurrent would be defined.

physics.optics↗

Ultra-compact modulators based on novel CMOS-compatible plasmonic materials

We propose several planar layouts of ultra-compact plasmonic waveguide modulators that utilize alternative CMOS-compatible materials. The modulation is efficiently achieved by tuning the carrier concentration in a transparent conducting oxide layer, thereby tuning the waveguide either in plasmonic resonance or off-resonance. Resonance significantly increases the absorption coefficient of the plasmonic waveguide, which enables larger modulation depth. We show that an extinction ratio of 86 dB/um can be achieved, allowing for a 3-dB modulation depth in less than one micron at the telecommunication wavelength. Our multilayer structures can potentially be integrated with existing plasmonic and photonic waveguides as well as novel semiconductor-based hybrid photonic/electronic circuits.

physics.optics↗

Plasmonic finite-thickness metal-semiconductor-metal waveguide as ultra-compact modulator

We propose a plasmonic modulator with semiconductor gain material for optoelectronic integrated circuits. We analyze properties of a finite-thickness metal-semiconductor-metal (F-MSM) waveguide to be utilized as an ultra-compact and fast plasmonic modulator. The InP-based semiconductor core allows electrical control of signal propagation. By pumping the core we can vary the gain level and thus the transmittance of the whole system. The study of the device was made using both analytical approaches for planar two-dimensional case as well as numerical simulations for finite-width waveguides. We analyze the eigenmodes of the F-MSM waveguide, propagation constant, confinement factor, Purcell factor, absorption coefficient, and extinction ratio of the structure. We show that using thin metal layers instead of thick ones we can obtain higher extinction ratio of the device.

physics.optics↗

Graphene hyperlens for terahertz radiation

We propose a graphene hyperlens for the terahertz (THz) range. We employ and numerically examine a structured graphene-dielectric multilayered stack that is an analogue of a metallic wire medium. As an example of the graphene hyperlens in action we demonstrate an imaging of two point sources separated with distance $λ_{0}/5$. An advantage of such a hyperlens as compared to a metallic one is the tunability of its properties by changing the chemical potential of graphene. We also propose a method to retrieve the hyperbolic dispersion, check the effective medium approximation and retrieve the effective permittivity tensor.

physics.optics↗

Metamaterial Polarization Converter Analysis: Limits of Performance

In this paper we analyze the theoretical limits of a metamaterial converter that allows for linear-to- elliptical polarization transformation with any desired ellipticity and ellipse orientation. We employ the transmission line approach providing a needed level of the design generalization. Our analysis reveals that the maximal conversion efficiency for transmission through a single metamaterial layer is 50%, while the realistic re ection configuration can give the conversion efficiency up to 90%. We show that a double layer transmission converter and a single layer with a ground plane can have 100% polarization conversion efficiency. We tested our conclusions numerically reaching the designated limits of efficiency using a simple metamaterial design. Our general analysis provides useful guidelines for the metamaterial polarization converter design for virtually any frequency range of the electromagnetic waves.

physics.optics↗

Plasmonic modulator optimized by patterning of active layer and tuning permittivity

We study an ultra-compact plasmonic modulator that can be applied in photonic integrated circuits. The modulator is a metal-insulator-metal waveguide with an additional ultra-thin layer of indium tin oxide (ITO). Bias is applied to the multilayer core by means of metal plates that serve as electrodes. External field changes carrier density in the ultra-thin ITO layer, which influences the permittivity. The metal-insulator-metal system possesses a plasmon resonance, and it is strongly affected by changes in the permittivity of the active layer. To improve performance of the structure we propose several optimizations. We examine influence of the ITO permittivity on the modulator's performance and point out appropriate values. We analyze eigenmodes of the waveguide structure and specify the range for its efficient operation. We show that substituting the continuous active layer by a one-dimension periodic stripes increases transmittance through the device and keeps the modulator's performance at the same level. The dependence on the pattern size and filling factor of the active material is analyzed and optimum parameters are found. Patterned ITO layers allow us to design a Bragg grating inside the waveguide. The grating can be turned on and off, thus modulating reflection from the structure. The considered structure with electrical control possesses a high performance and can efficiently work as a plasmonic component in nanophotonic architectures.

physics.optics↗

Bloch-mode analysis for retrieving effective parameters of metamaterials

We introduce a new approach for retrieving effective parameters of metamaterials based on the Bloch-mode analysis of quasi-periodic composite structures. We demonstrate that, in the case of single-mode propagation, a complex effective refractive index can be assigned to the structure, being restored by our method with a high accuracy. We employ both surface and volume averaging of the electromagnetic fields of the dominating (fundamental) Bloch modes to determine the Bloch and wave impedances, respectively. We discuss how this method works for several characteristic examples, and demonstrate that this approach can be useful for retrieval of both material and wave effective parameters of a broad range of metamaterials.

physics.optics↗

Nanocouplers for infrared and visible light

An efficient and compact coupler - a device that matches a micro-waveguide and a nano-waveguide - is an essential component for practical applications of nanophotonic systems. The number of coupling approaches has been rapidly increasing in the past ten years with the help of plasmonic structures and metamaterials. In this paper we overview recent as well as common solutions for nanocoupling. More specifically we consider the physical principles of operation of the devices based on a tapered waveguide section, a direct coupler, a lens and a scatterer and support them with a number of examples.

physics.optics↗

Plasmonic modulator based on gain-assisted metal-semiconductor-metal waveguide

We investigate plasmonic modulators with a gain material to be implemented as ultra-compact and ultra-fast active nanodevices in photonic integrated circuits. We analyze metal-semiconductor-metal (MSM) waveguides with InGaAsP-based active material layers as ultra-compact plasmonic modulators. The modulation is achieved by changing the gain of the core that results in different transmittance through the waveguides. A MSM waveguide enables high field localization and therefore high modulation speed. Bulk semiconductor, quantum wells and quantum dots, arranged in either horizontal or vertical layout, are considered as the core of the MSM waveguide. Dependences on the waveguide core size and gain values of various active materials are studied. The designs consider also practical aspects like n- and p-doped layers and barriers in order to obtain results as close to reality. The effective propagation constants in the MSM waveguides are calculated numerically. Their changes in the switching process are considered as a figure of merit. We show that a MSM waveguide with electrical current control of the gain incorporates compactness and deep modulation along with a reasonable level of transmittance.

physics.optics↗

High symmetry versus optical isotropy of a negative index metamaterial

Optically isotropic metamaterials (MMs) are required for the implementation of subwavelength imaging systems. At first glance one would expect that their design should be based on unit cells exhibiting a cubic symmetry being the highest crystal symmetry. It is anticipated that this is a sufficient condition since it is usually assumed that light does not resolve the spatial details of MM but experiences the properties of an effective medium, which is then optically isotropic. In this work we challenge this assumption by analyzing the isofrequency surfaces of the dispersion relation of the split-cube in carcass (SCiC) negative index MM. We show that this MM is basically optically isotropic, but not in the spectral domain where it exhibits negative refraction. The primary goal of this contribution is to introduce a tool that allows to probe a MM against optical isotropy.

physics.optics↗

Wave Propagation Retrieval Method For Metamaterials: Unambiguous Restoration Of Effective Parameters

In this article we propose a new direct method of effective parameters restoration that is based on the wave propagation phenomenon. It retrieves the effective properties unambiguously, is applicable to thick metamaterial (MTM) slabs and is easy in implementation. It is validated on the case studies of fishnet, split cube in carcass, Jerusalem cross and ultrahigh refractive index MTMs. The constraints of the method are designated.

physics.optics↗