SearcharxivSearch

arXiv subjects

Andrew M. Mounce

Publications and source records attributed to Andrew M. Mounce.

18 recordsLinked to original sources

Anisotropic spin-valley coupling in SiMOS and Si/SiGe quantum dots

While bulk silicon has long been understood to exhibit relatively weak spin-orbit coupling (SOC), confinement of electrons to quantum dots (QDs) at a silicon heterointerface results in significantly larger SOC. This is a concern for electron spin qubit performance, as intravalley and intervalley SOC can significantly perturb the operation of electron spin qubits. While these interactions can be harnessed to drive coherent rotations in a singlet-triplet qubit, coupling to low-lying excited valley states can lead to undesirable spin relaxation when valley splitting is on resonance with the Zeeman energy. In this work, we measure the angular dependence of the interfacial spin-orbit interaction as a function of the direction and magnitude of an applied external magnetic field in SiMOS and Si/SiGe heterostructures, two common material platforms for silicon spin qubits. We construct a physical model that accurately infers intra- and inter-valley SOC physics from fits to the data, allowing for a direct comparison between these two material systems. For the devices measured we find that, while the $g$-factor differences are comparable, the SiMOS QDs exhibit an order of magnitude larger spin-valley coupling than for Si/SiGe. Moreover, we find that the angular dependence of the spin-valley coupling is similar for both devices, with similar magnetic field orientations minimizing the spin-valley coupling. Our work points towards operational schemes for optimizing spin-valley coupling to avoid or exploit this mechanism for qubit operation.

cond-mat.mes-hall

Quantum Nanophotonic Interface for Tin-Vacancy Centers in Thin-Film Diamond

The negatively charged tin-vacancy center in diamond (SnV$^-$) is an excellent solid state qubit with optically-addressable transitions and a long electron spin coherence time at elevated ($\sim1.7$ K). However, implementing scalable quantum nodes with high-fidelity optical readout of the electron spin state requires efficient photon emission and collection from the system. In this manuscript, we report a quantum photonic interface for SnV$^-$ centers based on one-dimensional photonic crystal cavities fabricated in diamond thin films. Furthermore, we provide a rigorous description of the spontaneous emission dynamics of our system, taking into account individual contributions from both the C and D transitions of the emitter. This allows for determination of Purcell factors per transition and, by extension, the C/D branching ratio SnV$^{-}$ zero phonon line. We observe quality factors up to $\sim$6000 across this sample, and measure up to a 12-fold lifetime reduction, which translates into a Purcell factor of $F_C=26.2\pm1.5$ for a targeted C transition. By considering the cavity mode polarization alignment with the C and D transition dipole moments, we validate the C/D branching ratio to be $η_{\text{BR}}=0.75\pm0.01$, in line with previous theoretical and experimental findings.

quant-ph

Homogeneous Microwave Delivery for Quantum Sensing with Nitrogen-Vacancy Centers at High Pressures

Nitrogen vacancy (NV) centers have been demonstrated as a useful tool in high pressure environments. However, the geometry and small working area of the diamond anvil cells (DACs) used to apply pressure present a challenge to effective delivery of microwave (mw) fields. We designed and characterized a novel slotted design for mw transmission to nitrogen-vacancy centers (NVs) in a diamond anvil cell via zero-field and in-field optically detected magnetic resonance (ODMR) measurements across pressures between 1 and 48 GPa. The mw fields experienced by NVs across the diamond culet was calculated from Rabi frequency and found to be higher and more uniform than those generated by an equivalent simple mw line, which will improve performance for wide-field, high-pressure measurements to probe spatial variations across samples under pressure.

cond-mat.mtrl-sci

A spin-embedded diamond optomechanical resonator with mechanical quality factor exceeding one million

Diamond optomechanical crystal (OMC) devices with embedded color center spins are promising platforms for a broad range of applications in quantum sensing, networking, and computing applications, offering an interface between a GHz-frequency mechanical mode and both optical photons and coherent spins. A crucial but elusive step towards realizing this platform is to engineer a device with a high-quality factor mechanical mode while preserving the bulk-like coherence of embedded spins. Here we demonstrate sideband-resolved diamond OMCs with mechanical quality factors in excess of $10^6$ at cryogenic temperatures, and find coherence times up to $T_2$ = 270 $μ$s for embedded nitrogen vacancy (NV) centers. Furthermore, we measure these devices across five orders of magnitude in intracavity optical power, demonstrating robust power handling and a high optomechanical cooperativity ($C\gg1$) at cryogenic temperatures that is essential for a broad range of quantum protocols requiring strong, coherent interactions between photons and phonons. These results are enabled by a robust, high-throughput method for forming single-crystal diamond membranes in combination with chemical vapor deposition (CVD) diamond overgrowth with nitrogen $δ$-doping. We discuss the prospects of this platform for hybrid spin-mechanical devices in the quantum regime.

quant-ph

Fault Localization in a Microfabricated Surface Ion Trap using Diamond Nitrogen-Vacancy Center Magnetometry

As quantum computing hardware becomes more complex with ongoing design innovations and growing capabilities, the quantum computing community needs increasingly powerful techniques for fabrication failure root-cause analysis. This is especially true for trapped-ion quantum computing. As trapped-ion quantum computing aims to scale to thousands of ions, the electrode numbers are growing to several hundred with likely integrated-photonic components also adding to the electrical and fabrication complexity, making faults even harder to locate. In this work, we used a high-resolution quantum magnetic imaging technique, based on nitrogen-vacancy (NV) centers in diamond, to investigate short-circuit faults in an ion trap chip. We imaged currents from these short-circuit faults to ground and compared to intentionally-created faults, finding that the root-cause of the faults was failures in the on-chip trench capacitors. This work, where we exploited the performance advantages of a quantum magnetic sensing technique to troubleshoot a piece of quantum computing hardware, is a unique example of the evolving synergy between emerging quantum technologies to achieve capabilities that were previously inaccessible.

physics.ins-det

Wide-field microwave magnetic field imaging with nitrogen-vacancy centers in diamond

Non-invasive imaging of microwave (MW) magnetic fields with microscale lateral resolution is pivotal for various applications, such as MW technologies and integrated circuit failure analysis. Diamond nitrogen-vacancy (NV) center magnetometry has emerged as an ideal tool, offering $μ$m-scale resolution, millimeter-scale field of view, high sensitivity, and non-invasive imaging compatible with diverse samples. However, up until now, it has been predominantly used for imaging of static or low-frequency magnetic fields or, concerning MW field imaging, to directly characterize the same microwave device used to drive the NV spin transitions. In this work we leverage an NV center ensemble in diamond for wide-field imaging of MW magnetic fields generated by a test device employing a differential measurement protocol. The microscope is equipped with a MW loop to induce Rabi oscillations between NV spin states, and the MW field from the device-under-test is measured through local deviations in the Rabi frequency. This differential protocol yields magnetic field maps of a 2.57 GHz MW field with a sensitivity of $\sim$ 9 $μ$T Hz$^{-1/2}$ for a total measurement duration of $T = 357$ s, covering a $340\times340$ $μ$m$^2$ field of view with a $μ$m-scale spatial resolution and a DUT input power dynamic range of 30 dB. This work demonstrates a novel NV magnetometry protocol, based on differential Rabi frequency measurement, that extends NV wide-field imaging capabilities to imaging of weak MW magnetic fields that would be difficult to measure directly through standard NV Rabi magnetometry.

physics.app-ph

Cryogenic platform to investigate strong microwave cavity-spin coupling in correlated magnetic materials

We present a comprehensive exploration of loop-gap resonators (LGRs) for electron spin resonance (ESR) studies, enabling investigations into the hybridization of solid-state magnetic materials with microwave polariton modes. The experimental setup, implemented in a Physical Property Measurement System by Quantum Design, allows for ESR spectra at temperatures as low as 2 Kelvin. The versatility of continuous wave ESR spectroscopy is demonstrated through experiments on CuSO4.5H2O and MgCr2O4, showcasing the g-tensor and magnetic susceptibilities of these materials. The study delves into the challenges of fitting spectra under strong hybridization conditions and underscores the significance of proper calibration and stabilization. The detailed guide provided serves as a valuable resource for laboratories interested in exploring hybrid quantum systems through microwave resonators.

cond-mat.str-el

Fabrication of thin diamond membranes by Ne$^+$ implantation

Color centers in diamond are one of the most promising tools for quantum information science. Of particular interest is the use of single-crystal diamond membranes with nanoscale-thickness as hosts for color centers. Indeed, such structures guarantee a better integration with a variety of other quantum materials or devices, which can aid the development of diamond-based quantum technologies, from nanophotonics to quantum sensing. A common approach for membrane production is what is known as "smart-cut", a process where membranes are exfoliated from a diamond substrate after the creation of a thin sub-surface amorphous carbon layer by He$^+$ implantation. Due to the high ion fluence required, this process can be time-consuming. In this work, we demonstrated the production of thin diamond membranes by neon implantation of diamond substrates. With the target of obtaining membranes of $\sim$ 200 nm thickness and finding the critical damage threshold, we implanted different diamonds with 300 keV Ne$^+$ ions at different fluences. We characterized the structural properties of the implanted diamonds and the resulting membranes through SEM, Raman spectroscopy, and photoluminescence spectroscopy. We also found that a SRIM model based on a two-layer diamond/sp$^2$-carbon target better describes ion implantation, allowing us to estimate the diamond critical damage threshold for Ne$^+$ implantation. Compared to He$^+$ smart-cut, the use of a heavier ion like Ne$^+$ results in a ten-fold decrease in the ion fluence required to obtain diamond membranes and allows to obtain shallower smart-cuts, i.e. thinner membranes, at the same ion energy.

physics.app-ph

Mitigation of Nitrogen Vacancy Ionization from Material Integration for Quantum Sensing

The nitrogen-vacancy (NV) color center in diamond has demonstrated great promise in a wide range of quantum sensing. Recently, there have been a series of proposals and experiments using NV centers to detect spin noise of quantum materials near the diamond surface. This is a rich complex area of study with novel nano-magnetism and electronic behavior, that the NV center would be ideal for sensing. However, due to the electronic properties of the NV itself and its host material, getting high quality NV centers within nanometers of such systems is challenging. Band bending caused by space charges formed at the metal-semiconductor interface force the NV center into its insensitive charge states. Here, we investigate optimizing this interface by depositing thin metal films and thin insulating layers on a series of NV ensembles at different depths to characterize the impact of metal films on different ensemble depths. We find an improvement of coherence and dephasing times we attribute to ionization of other paramagnetic defects. The insulating layer of alumina between the metal and diamond provide improved photoluminescence and higher sensitivity in all modes of sensing as compared to direct contact with the metal, providing as much as a factor of 2 increase in sensitivity, decrease of integration time by a factor of 4, for NV $T_1$ relaxometry measurements.

cond-mat.mes-hall

Current Paths in an Atomic Precision Advanced Manufactured Device Imaged by Nitrogen-Vacancy Diamond Magnetic Microscopy

The recently-developed ability to control phosphorous-doping of silicon at an atomic level using scanning tunneling microscopy (STM), a technique known as atomic-precision-advanced-manufacturing (APAM), has allowed us to tailor electronic devices with atomic precision, and thus has emerged as a way to explore new possibilities in Si electronics. In these applications, critical questions include where current flow is actually occurring in or near APAM structures as well as whether leakage currents are present. In general, detection and mapping of current flow in APAM structures are valuable diagnostic tools to obtain reliable devices in digital-enhanced applications. In this paper, we performed nitrogen-vacancy (NV) wide-field magnetic imaging of stray magnetic fields from surface current densities flowing in an APAM test device over a mm-field of view with μm-resolution. To do this, we integrated a diamond having a surface NV ensemble with the device (patterned in two parallel mm-sized ribbons), then mapped the magnetic field from the DC current injected in the APAM device in a home-built NV wide-field microscope. The 2D magnetic field maps were used to reconstruct the surface current density, allowing us to obtain information on current paths, device failures such as choke points where current flow is impeded, and current leakages outside the APAM-defined P-doped regions. Analysis on the current density reconstructed map showed a projected sensitivity of ~0.03 A/m, corresponding to a smallest detectable current in the 200 μm-wide APAM ribbon of ~6 μA. These results demonstrate the failure analysis capability of NV wide-field magnetometry for APAM materials, opening the possibility to investigate other cutting-edge microelectronic devices.

physics.app-ph

Robust incorporation in multi-donor patches created using atomic-precision advanced manufacturing

Atomic-precision advanced manufacturing enables the placement of dopant atoms within $\pm$1 lattice site in crystalline Si. However, it has recently been shown that reaction kinetics can introduce uncertainty in whether a single donor will incorporate at all in a minimal 3-dimer lithographic window. In this work, we explore the combined impact of lithographic variation and stochastic kinetics on P incorporation as the size of such a window is increased. We augment a kinetic model for PH$_3$ dissociation leading to P incorporation on Si(100)-2$\times$1 to include barriers for reactions across distinct dimer rows. Using this model, we demonstrate that even for a window consisting of 2$\times$3 silicon dimers, the probability that at least one donor incorporates is nearly unity. We also examine the impact of size of the lithographic window, finding that the incorporation fraction saturates to $δ$-layer like coverage as the circumference-to-area ratio approaches zero. We predict that this incorporation fraction depends strongly on the dosage of the precursor, and that the standard deviation of the number of incorporations scales as $\sim \sqrt{n}$, as would be expected for a series of largely independent incorporation events. Finally, we characterize an array of experimentally prepared multi-donor lithographic windows and use our kinetic model to study variability due to the observed lithographic roughness, predicting a negligible impact on incorporation statistics. We find good agreement between our model and the inferred incorporation in these windows from scanning tunneling microscope measurements, indicating the robustness of atomic-precision advanced manufacturing to errors in patterning for multi-donor patches.

cond-mat.mes-hall

Nanoscale Solid-State Nuclear Quadrupole Resonance Spectroscopy using Depth-Optimized Nitrogen-Vacancy Ensembles in Diamond

Nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) spectroscopy of bulk quantum materials have provided insight into phenomena such as quantum phase criticality, magnetism, and superconductivity. With the emergence of nanoscale 2-D materials with magnetic phenomena, inductively-detected NMR and NQR spectroscopy are not sensitive enough to detect the smaller number of spins in nanomaterials. The nitrogen-vacancy (NV) center in diamond has shown promise in bringing the analytic power of NMR and NQR spectroscopy to the nanoscale. However, due to depth-dependent formation efficiency of the defect centers, noise from surface spins, band bending effects, and the depth dependence of the nuclear magnetic field, there is ambiguity regarding the ideal NV depth for surface NMR of statistically-polarized spins. In this work, we prepared a range of shallow NV ensemble layer depths and determined the ideal NV depth by performing NMR spectroscopy on statistically-polarized \fluorine{} in Fomblin oil on the diamond surface. We found that the measurement time needed to achieve an SNR of 3 using XY8-N noise spectroscopy has a minimum at an NV depth of 5.4 nm. To demonstrate the sensing capabilities of NV ensembles, we perform NQR spectroscopy on the \boron{} of hexagonal boron nitride flakes. We compare our best diamond to previous work with a single NV and find that this ensemble provides a shorter measurement time with excitation diameters as small as 4 $μ$m. This analysis provides ideal conditions for further experiments involving NMR/NQR spectroscopy of 2-D materials with magnetic properties.

cond-mat.mes-hall

A fitting algorithm for optimizing ion implantation energies and fluences

We describe a method to automatically generate an ion implantation recipe, a set of energies and fluences, to produce a desired defect density profile in a solid using the fewest required energies. We simulate defect density profiles for a range of ion energies, fit them with an appropriate function, and interpolate to yield defect density profiles at arbitrary ion energies. Given $N$ energies, we then optimize a set of $N$ energy-fluence pairs to match a given target defect density profile. Finally, we find the minimum $N$ such that the error between the target defect density profile and the defect density profile generated by the $N$ energy-fluence pairs is less than a given threshold. Inspired by quantum sensing applications with nitrogen-vacancy centers in diamond, we apply our technique to calculate optimal ion implantation recipes to create uniform-density 1 $μ$m surface layers of $^{15}$N or vacancies (using $^4$He).

cond-mat.mtrl-sci

The impact of stochastic incorporation on atomic-precision Si:P arrays

Scanning tunneling microscope lithography can be used to create nanoelectronic devices in which dopant atoms are precisely positioned in a Si lattice within $\sim$1 nm of a target position. This exquisite precision is promising for realizing various quantum technologies. However, a potentially impactful form of disorder is due to incorporation kinetics, in which the number of P atoms that incorporate into a single lithographic window is manifestly uncertain. We present experimental results indicating that the likelihood of incorporating into an ideally written three-dimer single-donor window is $63 \pm 10\%$ for room-temperature dosing, and corroborate these results with a model for the incorporation kinetics. Nevertheless, further analysis of this model suggests conditions that might raise the incorporation rate to near-deterministic levels. We simulate bias spectroscopy on a chain of comparable dimensions to the array in our yield study, indicating that such an experiment may help confirm the inferred incorporation rate.

cond-mat.mes-hall

A physically unclonable function using NV diamond magnetometry and micromagnet arrays

A physically unclonable function (PUF) is an embedded hardware security measure that provides protection against counterfeiting. Here we present our work on using an array of randomly-magnetized micron-sized ferromagnetic bars (micromagnets) as a PUF. We employ a 4 $μ$m thick surface layer of nitrogen-vacancy (NV) centers in diamond to image the magnetic fields from each micromagnet in the array, after which we extract the magnetic polarity of each micromagnet using image analysis techniques. After evaluating the randomness of the micromagnet array PUF and the sensitivity of the NV readout, we conclude by discussing the possible future enhancements for improved security and magnetic readout.

cond-mat.mes-hall

Spin-orbit Interactions for Singlet-Triplet Qubits in Silicon

Spin-orbit coupling is relatively weak for electrons in bulk silicon, but enhanced interactions are reported in nanostructures such as the quantum dots used for spin qubits. These interactions have been attributed to various dissimilar interface effects, including disorder or broken crystal symmetries. In this Letter, we use a double-quantum-dot qubit to probe these interactions by comparing the spins of separated singlet-triplet electron pairs. We observe both intravalley and intervalley mechanisms, each dominant for [110] and [100] magnetic field orientations, respectively, that are consistent with a broken crystal symmetry model. We also observe a third spin-flip mechanism caused by tunneling between the quantum dots. This improved understanding is important for qubit uniformity, spin control and decoherence, and two-qubit gates.

cond-mat.mes-hall

All-electrical universal control of a double quantum dot qubit in silicon MOS

Qubits based on transistor-like Si MOS nanodevices are promising for quantum computing. In this work, we demonstrate a double quantum dot spin qubit that is all-electrically controlled without the need for any external components, like micromagnets, that could complicate integration. Universal control of the qubit is achieved through spin-orbit-like and exchange interactions. Using single shot readout, we show both DC- and AC-control techniques. The fabrication technology used is completely compatible with CMOS.

cond-mat.mes-hall

Probing low noise at the MOS interface with a spin-orbit qubit

The silicon metal-oxide-semiconductor (MOS) material system is technologically important for the implementation of electron spin-based quantum information technologies. Researchers predict the need for an integrated platform in order to implement useful computation, and decades of advancements in silicon microelectronics fabrication lends itself to this challenge. However, fundamental concerns have been raised about the MOS interface (e.g. trap noise, variations in electron g-factor and practical implementation of multi-QDs). Furthermore, two-axis control of silicon qubits has, to date, required the integration of non-ideal components (e.g. microwave strip-lines, micro-magnets, triple quantum dots, or introduction of donor atoms). In this paper, we introduce a spin-orbit (SO) driven singlet-triplet (ST) qubit in silicon, demonstrating all-electrical two-axis control that requires no additional integrated elements and exhibits charge noise properties equivalent to other more model, but less commercially mature, semiconductor systems. We demonstrate the ability to tune an intrinsic spin-orbit interface effect, which is consistent with Rashba and Dresselhaus contributions that are remarkably strong for a low spin-orbit material such as silicon. The qubit maintains the advantages of using isotopically enriched silicon for producing a quiet magnetic environment, measuring spin dephasing times of 1.6 $μ$s using 99.95% $^{28}$Si epitaxy for the qubit, comparable to results from other isotopically enhanced silicon ST qubit systems. This work, therefore, demonstrates that the interface inherently provides properties for two-axis control, and the technologically important MOS interface does not add additional detrimental qubit noise.

cond-mat.mes-hall