arXiv subjects

Andrew N. Jordan

Publications and source records attributed to Andrew N. Jordan.

At least 55 records · Page 3Linked to original sources

arXiv2023

Energy-efficient quantum non-demolition measurement with a spin-photon interface

Spin-photon interfaces (SPIs) are key devices of quantum technologies, aimed at coherently transferring quantum information between spin qubits and propagating pulses of polarized light. We study the potential of a SPI for quantum non demolition (QND) measurements of a spin state. After being initialized and scattered by the SPI, the state of a light pulse depends on the spin state. It thus plays the role of a pointer state, information being encoded in the light's temporal and polarization degrees of freedom. Building on the fully Hamiltonian resolution of the spin-light dynamics, we show that quantum superpositions of zero and single photon states outperform coherent pulses of light, producing pointer states which are more distinguishable with the same photon budget. The energetic advantage provided by quantum pulses over coherent ones is maintained when information on the spin state is extracted at the classical level by performing projective measurements on the light pulses. The proposed schemes are robust against imperfections in state of the art semi-conducting devices.

quant-ph↗

arXiv2023

Many-body quantum vacuum fluctuation engines

We propose a many-body quantum engine powered by the energy difference between the entangled ground state of the interacting system and local separable states. Performing local energy measurements on an interacting many-body system can produce excited states from which work can be extracted via local feedback operations. These measurements reveal the quantum vacuum fluctuations of the global ground state in the local basis and provide the energy required to run the engine. The reset part of the engine cycle is particularly simple: The interacting many-body system is coupled to a cold bath and allowed to relax to its entangled ground state. We illustrate our proposal on two types of many-body systems: a chain of coupled qubits and coupled harmonic oscillator networks. These models faithfully represent fermionic and bosonic excitations, respectively. In both cases, analytical results for the work output and efficiency of the engine can be obtained. Generically, the work output scales as the number of quantum systems involved, while the efficiency limits to a constant. We prove the efficiency is controlled by the "local entanglement gap" -- the energy difference between the global ground state and the lowest energy eigenstate of the local Hamiltonian. In the qubit chain case, we highlight the impact of a quantum phase transition on the engine's performance as work and efficiency sharply increase at the critical point. In the case of a one-dimensional oscillator chain, we show the efficiency approaches unity as the number of coupled oscillators increases, even at finite work output.

quant-ph↗

arXiv2023

Fundamental Limits on Subwavelength Range Resolution

We establish fundamental bounds on subwavelength resolution for the radar ranging problem, ``super radar''. Information theoretical metrics are applied to probe the resolution limits for the case of both direct electric field measurement and photon-counting measurements. To establish fundamental limits, we begin with the simplest case of range resolution of two point targets from a metrology perspective. These information-based metrics establish fundamental bounds on both the minimal discrimination distance of two targets as well as the precision on the separation of two subwavelength resolved targets. For the minimal separation distance, both the direct field method and photon counting method show that the discriminability vanishes quadratically as the target separation goes to zero, and is proportional to the variance of the second derivative of the electromagnetic field profile. Nevertheless, robust subwavelength estimation is possible. Several different band-limited function classes are introduced to optimize discrimination. We discuss the application of maximum likelihood estimation to improve the range precision with optimal performance. The general theory of multi-parameter estimation is analyzed, and a simple example of estimating both the separation and relative strength of the two point reflectors is presented.

physics.optics↗

arXiv2023

A quantum Stirling heat engine operating in finite time

In a quantum Stirling heat engine, the heat exchanged with two thermal baths is partly utilized for performing work by redistributing the energy levels of the working substance. We analyze the thermodynamics of a quantum Stirling engine operating in finite time. We develop a model in which a time-dependent potential barrier changes the energy-level structure of the working substance. The process takes place under a constant interaction with the thermal bath. We further show that in the limit of slow operation of the cycle and low temperature, the efficiency of such an engine approaches Carnot efficiency. We also show that the maximum output power , for the strokes that affect the energy levels, is obtained at an intermediate operating speed, demonstrating the importance of a finite-time analysis.

quant-ph↗

arXiv2023

Quantum State Driving along Arbitrary Trajectories

Starting with the quantum brachistochrone problem of the infinitesimal form, we solve the minimal time and corresponding time-dependent Hamiltonian to drive a pure quantum state with limited resources along arbitrary pre-assigned trajectories. It is also shown that out of all possible trajectories, with limited resources, which are physically accessible and which are not. The solution is then generalized to the mixed quantum state cases, and applied to trajectories parameterized by single or multiple parameters with discrete or continuous spectrum. We then compare the solution to that of the counterdiabatic driving, and show how the Berry phase is directly involved in both driving processes.

quant-ph↗

arXiv2023

Supergrowth and sub-wavelength object imaging

We further develop the concept of supergrowth [Jordan, Quantum Stud.: Math. Found. $\textbf{7}$, 285-292 (2020)], a phenomenon complementary to superoscillation, defined as the local amplitude growth rate of a function being higher than its largest wavenumber. We identify the superoscillating and supergrowing regions of a canonical oscillatory function and find the maximum values of local growth rate and wavenumber. Next, we provide a quantitative comparison of lengths and relevant intensities between the superoscillating and the supergrowing regions of a canonical oscillatory function. Our analysis shows that the supergrowing regions contain intensities that are exponentially larger in terms of the highest local wavenumber compared to the superoscillating regions. Finally, we prescribe methods to reconstruct a sub-wavelength object from the imaging data using both superoscillatory and supergrowing point spread functions. Our investigation provides an experimentally preferable alternative to the superoscillation based superresolution schemes and is relevant to cutting-edge research in far-field sub-wavelength imaging.

physics.optics↗

arXiv2023

Beyond Superoscillation: General Theory of Approximation with Bandlimited Functions

We give a general strategy to construct superoscillating/growing functions using an orthogonal polynomial expansion of a bandlimited function. The degree of superoscillation/growth is controlled by an anomalous expectation value of a pseudodistribution that exceeds the band limit. The function is specified via the rest of its cumulants of the pseudodistribution. We give an explicit construction using Legendre polynomials in the Fourier space, which leads to an expansion in terms of spherical Bessel functions in the real space. The other expansion coefficients may be chosen to optimize other desirable features, such as the range of super behavior. We provide a prescription to generate bandlimited functions that mimic an arbitrary behavior in a finite interval. As target behaviors, we give examples of a superoscillating function, a supergrowing function, and even a discontinuous step function. We also look at the energy content in a superoscillating/supergrowing region and provide a bound that depends on the minimum value of the logarithmic derivative in that interval. Our work offers a new approach to analyzing superoscillations/supergrowth and is relevant to the optical field spot generation endeavors for far-field superresolution imaging.

math-ph↗

arXiv2023

Measurement-based quantum thermal machines with feedback control

We investigate coupled-qubit-based thermal machines powered by quantum measurements and feedback. We consider two different versions of the machine: 1) a quantum Maxwell's demon where the coupled-qubit system is connected to a detachable single shared bath, and 2) a measurement-assisted refrigerator where the coupled-qubit system is in contant with a hot and cold bath. In the quantum Maxwell's demon case we discuss both discrete and continuous measurements. We find that the power output from a single qubit-based device can be improved by coupling it to the second qubit. We further find that the simultaneous measurement of both qubits can produce higher net heat extraction compared to two setups operated in parallel where only single-qubit measurements are performed. In the refrigerator case, we use continuous measurement and unitary operations to power the coupled-qubit-based refrigerator. We find that the cooling power of a refrigerator operated with swap operations can be enhanced by performing suitable measurements.

quant-ph↗

arXiv2022

Cyclic Superconducting Quantum Refrigerators Using Guided Fluxon Propagation

We propose cyclic quantum refrigeration in solid-state, employing a gas of magnetic field vortices in a type-II superconductor -- also known as fluxons -- as the cooling agent. Refrigeration cycles are realized by envisioning a racetrack geometry consisting of both adiabatic and isothermal arms, etched into a type-II superconductor. The guided propagation of fluxons in the racetrack is achieved by applying an external electrical current, in a Corbino geometry, through the sample. A gradient of magnetic field is set across the racetrack allowing one to adiabatically cool down and heat up the fluxons, which subsequently exchange heat with the cold, and hot reservoirs, respectively. We characterize the steady state of refrigeration cycles thermodynamically for both $s-$wave and $d-$wave pairing symmetries, and present their figures of merit such as the cooling power delivered, and the coefficient of performance. Our cooling principle can offer significant cooling for on-chip micro-refrigeration purposes, by locally cooling below the base temperatures achievable in a conventional dilution refrigerator. We estimate $10\mathrm{nW}/\mathrm{mm}^2$ of cooling power per unit area under typical operating conditions. Integrating the fluxon fridge to quantum circuits can enhance their coherence time by locally suppressing thermal fluctuations, and improve the efficiency of single photon detectors and charge sensors.

cond-mat.mes-hall↗

arXiv2022

Quantum Telescopy Clock Games

We consider the clock game-a task formulated in the framework of quantum information theory-that can be used to improve the existing schemes of quantum-enhanced telescopy. The problem of learning when a stellar photon reaches a telescope is translated into an abstract game, which we call the clock game. A winning strategy is provided that involves performing a quantum non-demolition measurement that verifies which stellar spatio-temporal modes are occupied by a photon without disturbing the phase information. We prove tight lower bounds on the entanglement cost needed to win the clock game, with the amount of necessary entangled bits equaling the number of time-bins being distinguished. This lower bound on the entanglement cost applies to any telescopy protocol that aims to non-destructively extract the time-bin information of an incident photon through local measurements, and our result implies that the protocol of Khabiboulline et al. [\text{Phys. Rev. Lett.} 123, 70504 (2019)] is optimal in terms of entanglement consumption. The full task of the phase extraction is also considered, and we show that the quantum Fisher information of the stellar phase can be achieved by local measurements and shared entanglement without the necessity of nonlinear optical operations. The optimal phase measurement is achieved asymptotically with increasing number of ancilla qubits, whereas a single qubit pair is required if nonlinear operations are allowed.

quant-ph↗

arXiv2022

Programmable Heisenberg interactions between Floquet qubits

The fundamental trade-off between robustness and tunability is a central challenge in the pursuit of quantum simulation and fault-tolerant quantum computation. In particular, many emerging quantum architectures are designed to achieve high coherence at the expense of having fixed spectra and consequently limited types of controllable interactions. Here, by adiabatically transforming fixed-frequency superconducting circuits into modifiable Floquet qubits, we demonstrate an XXZ Heisenberg interaction with fully adjustable anisotropy. This interaction model is on one hand the basis for many-body quantum simulation of spin systems, and on the other hand the primitive for an expressive quantum gate set. To illustrate the robustness and versatility of our Floquet protocol, we tailor the Heisenberg Hamiltonian and implement two-qubit iSWAP, CZ, and SWAP gates with estimated fidelities of 99.32(3)%, 99.72(2)%, and 98.93(5)%, respectively. In addition, we implement a Heisenberg interaction between higher energy levels and employ it to construct a three-qubit CCZ gate with a fidelity of 96.18(5)%. Importantly, the protocol is applicable to various fixed-frequency high-coherence platforms, thereby unlocking a suite of essential interactions for high-performance quantum information processing. From a broader perspective, our work provides compelling avenues for future exploration of quantum electrodynamics and optimal control using the Floquet framework.

quant-ph↗

arXiv2022

Time-Dependent Hamiltonian Reconstruction using Continuous Weak Measurements

Reconstructing the Hamiltonian of a quantum system is an essential task for characterizing and certifying quantum processors and simulators. Existing techniques either rely on projective measurements of the system before and after coherent time evolution and do not explicitly reconstruct the full time-dependent Hamiltonian or interrupt evolution for tomography. Here, we experimentally demonstrate that an a priori unknown, time-dependent Hamiltonian can be reconstructed from continuous weak measurements concurrent with coherent time evolution in a system of two superconducting transmons coupled by a flux-tunable coupler. In contrast to previous work, our technique does not require interruptions, which would distort the recovered Hamiltonian. We introduce an algorithm which recovers the Hamiltonian and density matrix from an incomplete set of continuous measurements and demonstrate that it reliably extracts amplitudes of a variety of single qubit and entangling two qubit Hamiltonians. We further demonstrate how this technique reveals deviations from a theoretical control Hamiltonian which would otherwise be missed by conventional techniques. Our work opens up novel applications for continuous weak measurements, such as studying non-idealities in gates, certifying analog quantum simulators, and performing quantum metrology.

quant-ph↗

arXiv2022

Anomalous energy exchanges and Wigner function negativities in a single qubit gate

Anomalous weak values and Wigner function's negativity are well known witnesses of quantum contextuality. We show that these effects occur when analyzing the energetics of a single qubit gate generated by a resonant coherent field traveling in a waveguide. The buildup of correlations between the qubit and the field is responsible for bounds on the gate fidelity, but also for a nontrivial energy balance recently observed in a superconducting setup. In the experimental scheme, the field is continuously monitored through heterodyne detection and then post-selected over the outcomes of a final qubit's measurement. The post-selected data can be interpreted as field's weak values and can show anomalous values in the variation of the field's energy. We model the joint system dynamics with a collision model, gaining access to the qubit-field entangled state at any time. We find an analytical expression of the quasi-probability distribution of the post-selected heterodyne signal, i.e. the conditional Husimi-Q function. The latter grants access to all the field's weak values: we use it to obtain that of the field's energy change and display its anomalous behaviour. Finally, we derive the field's conditional Wigner function and show that anomalous weak values and Wigner function's negativities arise for the same values of the gate's angle.

quant-ph↗

arXiv2022

Analog Quantum Simulation of the Dynamics of Open Quantum Systems with Quantum Dots and Microelectronic Circuits

We introduce a general setup for the analog quantum simulation of the dynamics of open quantum systems based on semiconductor quantum dots electrically connected to a chain of quantum $RLC$ electronic circuits. The dots are chosen to be in the regime of spin-charge hybridization to enhance their sensitivity to the $RLC$ circuits while mitigating the detrimental effects of unwanted noise. In this context, we establish an experimentally realizable map between the hybrid system and a qubit coupled to thermal harmonic environments of arbitrary complexity that enables the analog quantum simulation of open quantum systems. We assess the utility of the simulator by numerically exact emulations that indicate that the experimental setup can faithfully mimic the intended target even in the presence of its natural inherent noise. We further provide a detailed analysis of the physical requirements on the quantum dots and the $RLC$ circuits needed to experimentally realize this proposal that indicates that the simulator can be created with existing technology. The approach can exactly capture the effects of highly structured non-Markovian quantum environments typical of photosynthesis and chemical dynamics, and offer clear potential advantages over conventional and even quantum computation. The proposal opens a general path for effective quantum dynamics simulations based on semiconductor quantum dots.

quant-ph↗

arXiv2022

Thermodynamics of Quantum Measurement and the Demon's Arrow of Time

We discuss the thermodynamic aspects of a single qubit based device, powered by weak quantum measurements, and feedback controlled by a quantum Maxwell's demon. We discuss both discrete and time-continuous operation of the measurement based device at finite temperature of the reservoir. In the discrete example where a demon acquires information via discrete weak measurements, we find that the thermodynamic variables including the heat exchanged, extractable work, and the entropy produced are completely determined by an information theoretic measure of the demon's perceived arrow of time. We also discuss a realistic time-continuous operation of the device where the feedback is applied after a sequence of weak measurements. In the time-continuous limit, we derive the exact finite-time statistics of work, heat and entropy changes along individual quantum trajectories of the quantum measurement process, and relate them to the demon's arrow of time.

quant-ph↗

arXiv2022

Energetics of a Single Qubit Gate

Qubits are physical, a quantum gate thus not only acts on the information carried by the qubit but also on its energy. What is then the corresponding flow of energy between the qubit and the controller that implements the gate? Here we exploit a superconducting platform to answer this question in the case of a quantum gate realized by a resonant drive field. During the gate, the superconducting qubit becomes entangled with the microwave drive pulse so that there is a quantum superposition between energy flows. We measure the energy change in the drive field conditioned on the outcome of a projective qubit measurement. We demonstrate that the drive's energy change associated with the measurement backaction can exceed by far the energy that can be extracted by the qubit. This can be understood by considering the qubit as a weak measurement apparatus of the driving field.

quant-ph↗

arXiv2022

Continuous Measurement Boosted Adiabatic Quantum Thermal Machines

We present a unified approach to study continuous measurement based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate definition for heat transfer and dissipation owing to continous measurement in the presence and absence of adiabatic driving. We illustrate the aforementioned ideas and study the phenomena of refrigeration in two different paradigmatic examples: a coupled quantum dot and a coupled qubit system, both undergoing continuous measurement and slow driving. In the time-independent case, we show that quantum coherence can improve the cooling power of measurement based quantum refrigerators. Exclusively for the case of coupled qubits, we consider linear as well as non-linear system-bath couplings. We observe that non-linear coupling produces cooling effects in certain regime where otherwise heating is expected. In the adiabatically driven case, we observe that quantum measurement can provide significant boost to the power of adiabatic quantum refrigerators. We also observe that the obtained boost can be larger than the sum of power due to individual effects. The measurement based refrigerators can have similar or better coefficient of performance (COP) in the driven case compared to the static one in the regime where heat extraction is maximum. Our results have potential significance for future application in devices ranging from measurement based quantum thermal machines to refrigeration in quantum processing networks.

quant-ph↗

arXiv2022

Post-selection and quantum energetics

We investigate the anomalous energy change of the measurement apparatus when a qubit is measured in bases that do not commute with energy. We model two possible measurement implementations: one is a quantum clock model with a completely time-independent Hamiltonian, while the other is a Jaynes-Cummings model which is time-dependent but conserves the total excitation number. We look at the mean energy change of the measurement apparatus in both models, conditioned on the qubit post-selection, and find that this change can be much greater than the level spacing of the qubit, like an anomalous weak value. In the clock model, the expression for the apparatus energy shift explicitly contains the weak value of the qubit Hamiltonian. However, in our case, no explicit weak measurements are carried out. Our two models give different results, which we explain to be a consequence of the non-degenerate spectrum of the Jaynes-Cummings model. We compare our calculations in the Jaynes-Cummings model with the experimental data of [J. Stevens, et al, arXiv:2109.09648 (2021)] and find good agreement when the conditions of our derivation are valid.

quant-ph↗