arXiv subjects

Andrew N. Jordan

Publications and source records attributed to Andrew N. Jordan.

At least 73 records · Page 4Linked to original sources

arXiv2022

Energetic cost of measurements using quantum, coherent, and thermal light

Quantum measurements are basic operations that play a critical role in the study and application of quantum information. We study how the use of quantum, coherent, and classical thermal states of light in a circuit quantum electrodynamics setup impacts the performance of quantum measurements, by comparing their respective measurement backaction and measurement signal to noise ratio per photon. In the strong dispersive limit, we find that thermal light is capable of performing quantum measurements with comparable efficiency to coherent light, both being outperformed by single-photon light. We then analyze the thermodynamic cost of each measurement scheme. We show that single-photon light shows an advantage in terms of energy cost per information gain, reaching the fundamental thermodynamic cost.

quant-ph↗

arXiv2022

Continuous measurement of a qudit using dispersively coupled radiation

We analyze the continuous monitoring of a qudit coupled to a cavity using both phase-preserving and phase-sensitive amplification. The quantum trajectories of the system are described by a stochastic master equation, for which we derive the appropriate Lindblad operators. The measurement back-action causes spiraling in the state coordinates during collapse, which increases as the system levels become less distinguishable. We discuss two examples: a two-level system and an $N$-dimensional system and meter with rotational symmetry in the quadrature space. We also provide a comparison of the effects of phase-preserving and phase-sensitive detection on the master equation, and show that the average behavior is the same in both cases, but individual trajectories collapse at different rates depending on the measurement axis in the quadrature plane.

quant-ph↗

arXiv2022

Efficiently Fuelling a Quantum Engine with Incompatible Measurements

We propose a quantum harmonic oscillator measurement engine fueled by simultaneous quantum measurements of the non-commuting position and momentum quadratures of the quantum oscillator. The engine extracts work by moving the harmonic trap suddenly, conditioned on the measurement outcomes. We present two protocols for work extraction, respectively based on single-shot and time-continuous quantum measurements. In the single-shot limit, the oscillator is measured in a coherent state basis; the measurement adds an average of one quantum of energy to the oscillator, which is then extracted in the feedback step. In the time-continuous limit, continuous weak quantum measurements of both position and momentum of the quantum oscillator result in a coherent state, whose coordinates diffuse in time. We relate the extractable work to the noise added by quadrature measurements, and present exact results for the work distribution at arbitrary finite time. Both protocols can achieve unit work conversion efficiency in principle.

quant-ph↗

arXiv2022

Variational principle for optimal quantum controls in quantum metrology

We develop a variational principle to determine the quantum controls and initial state which optimizes the quantum Fisher information, the quantity characterizing the precision in quantum metrology. When the set of available controls is limited, the exact optimal initial state and the optimal controls are in general dependent on the probe time, a feature missing in the unrestricted case. Yet, for time-independent Hamiltonians with restricted controls, the problem can be approximately reduced to the unconstrained case via the Floquet engineering. In particular, we find for magnetometry with a time-independent spin chain containing three-body interactions, even when the controls are restricted to one and two-body interaction, that the Heisenberg scaling can still be approximately achieved. Our results open the door to investigate quantum metrology under a limited set of available controls, of relevance to many-body quantum metrology in realistic scenarios.

quant-ph↗

arXiv2021

Super-Heisenberg scaling in Hamiltonian parameter estimation in the long-range Kitaev chain

In quantum metrology, nonlinear many-body interactions can enhance the precision of Hamiltonian parameter estimation to surpass the Heisenberg scaling. Here, we consider the estimation of the interaction strength in linear systems with long-range interactions and using the Kitaev chains as a case study, we establish a transition from the Heisenberg to super-Heisenberg scaling in the quantum Fisher information by varying the interaction range. We further show that quantum control can improve the prefactor of the quantum Fisher information. Our results explore the advantage of optimal quantum control and long-range interactions in many-body quantum metrology.

quant-ph↗

arXiv2021

Entanglement of a pair of quantum emitters via continuous fluorescence measurements: a tutorial

We discuss recent developments in measurement protocols that generate quantum entanglement between two remote qubits, focusing on the theory of joint continuous detection of their spontaneous emission. We consider a device geometry similar to that used in well-known Bell-state measurements, which we analyze using a conceptually transparent model of stochastic quantum trajectories; we use this to review photodetection, the most straightforward case, and then generalize to the diffusive trajectories from homodyne and heterodyne detection as well. Such quadrature measurement schemes are a realistic two-qubit extension of existing circuit-QED experiments which obtain quantum trajectories by homodyning or heterodyning a superconducting qubit's spontaneous emission, or an adaptation of existing optical measurement schemes to obtain jump trajectories from emitters. We mention key results, presented from within a single theoretical framework, and draw connections to concepts in the wider literature on entanglement generation by measurement (such as path information erasure and entanglement swapping). The photon which-path information acquisition, and therefore the two-qubit entanglement yield, is tunable under the homodyne detection scheme we discuss, at best generating equivalent average entanglement dynamics as in the comparable photodetection case. In addition to deriving this known equivalence, we extend past analyses in our characterization of the measurement dynamics: We include derivations of bounds on the fastest possible evolution towards a Bell state under joint homodyne measurement dynamics, and characterize the maximal entanglement yield possible using inefficient (lossy) measurements.

quant-ph↗

arXiv2021

Minimal two-body quantum absorption refrigerator

We study the phenomenon of absorption refrigeration, where refrigeration is achieved by heating instead of work, in two different setups: a minimal set up based on coupled qubits, and two non-linearly coupled resonators. Considering ZZ interaction between the two qubits, we outline the basic ingredients required to achieve cooling. Using local as well as global master equations, we observe that inclusion of XX type term in the qubit-qubit coupling is detrimental to cooling. We compare the cooling effect obtained in the qubit case with that of non-linearly coupled resonators (multi-level system) where the ZZ interaction translates to a Kerr-type non-linearity. For small to intermediate strengths of non-linearity, we observe that multi-level quantum systems, for example qutrits, give better cooling effect compared to the qubits. Using Keldysh non-equilibrium Green's function formalism, we go beyond first order sequential tunneling processes and study the effect of higher order processes on refrigeration. We find reduced cooling effect compared to the master equation calculations.

quant-ph↗

arXiv2021

Thermal control across a chain of electronic nanocavities

We study a chain of alternating hot and cold electronic nanocavities -- connected to one another via resonant-tunneling quantum dots -- with the intent of achieving precise thermal control across the chain. This is accomplished by positioning the dots' energy levels such that a predetermined distribution of heat currents is realized across the chain in the steady state. The number of electrons in each cavity is conserved in the steady state which constrains the cavities' chemical potentials. We determine these chemical potentials analytically in the linear response regime where the energy differences between the dots' resonant levels and the neighboring chemical potentials are much smaller than the thermal energy. In this regime, the thermal control problem can be solved exactly, while, in the general case, thermal control can only be achieved in a relative sense, that is, when one only preassigns the ratios between different heat currents. We apply our results to two different cases: We first demonstrate that a "heat switch" can be easily realized with three coupled cavities, then we show that our linear response results can provide accurate results in situations with a large number of cavities.

cond-mat.mes-hall↗

arXiv2021

Experimental demonstration of continuous quantum error correction

The storage and processing of quantum information are susceptible to external noise, resulting in computational errors that are inherently continuous A powerful method to suppress these effects is to use quantum error correction. Typically, quantum error correction is executed in discrete rounds where errors are digitized and detected by projective multi-qubit parity measurements. These stabilizer measurements are traditionally realized with entangling gates and projective measurement on ancillary qubits to complete a round of error correction. However, their gate structure makes them vulnerable to errors occurring at specific times in the code and errors on the ancilla qubits. Here we use direct parity measurements to implement a continuous quantum bit-flip correction code in a resource-efficient manner, eliminating entangling gates, ancilla qubits, and their associated errors. The continuous measurements are monitored by an FPGA controller that actively corrects errors as they are detected. Using this method, we achieve an average bit-flip detection efficiency of up to 91%. Furthermore, we use the protocol to increase the relaxation time of the protected logical qubit by a factor of 2.7 over the relaxation times of the bare comprising qubits. Our results showcase resource-efficient stabilizer measurements in a multi-qubit architecture and demonstrate how continuous error correction codes can address challenges in realizing a fault-tolerant system.

quant-ph↗

arXiv2021

Quantum erasing the memory of Wigner's friend

The Wigner's friend paradox concerns one of the most puzzling problems of quantum mechanics: the consistent description of multiple nested observers. Recently, a variation of Wigner's gedankenexperiment, introduced by Frauchiger and Renner, has lead to new debates about the self-consistency of quantum mechanics. At the core of the paradox lies the description of an observer and the object it measures as a closed system obeying the Schrödinger equation. We revisit this assumption to derive a necessary condition on a quantum system to behave as an observer. We then propose a simple single-photon interferometric setup implementing Frauchiger and Renner's scenario, and use the derived condition to shed a new light on the assumptions leading to their paradox. From our description, we argue that the three apparently incompatible properties used to question the consistency of quantum mechanics correspond to two logically distinct contexts: either one assumes that Wigner has full control over his friends' lab, or conversely that some parts of the labs remain unaffected by Wigner's subsequent measurements. The first context may be seen as the quantum erasure of the memory of Wigner's friend. We further show these properties are associated with observables which do not commute, and therefore cannot take well-defined values simultaneously. Consequently, the three contradictory properties never hold simultaneously.

quant-ph↗

arXiv2021

Enhanced weak-value amplification via photon recycling

In a quantum-noise limited system, weak-value amplification using post-selection normally does not produce more sensitive measurements than standard methods for ideal detectors: the increased weak value is compensated by the reduced power due to the small post-selection probability. Here we experimentally demonstrate recycled weak-value measurements using a pulsed light source and optical switch to enable nearly deterministic weak-value amplification of a mirror tilt. Using photon counting detectors, we demonstrate a signal improvement by a factor of $4.4 \pm 0.2$ and a signal-to-noise ratio improvement of $2.10 \pm 0.06$, compared to a single-pass weak-value experiment, and also compared to a conventional direct measurement of the tilt. The signal-to-noise ratio improvement could reach around 6 for the parameters of this experiment, assuming lower loss elements.

quant-ph↗

arXiv2021

Confocal super-resolution microscopy based on a spatial mode sorter

Spatial resolution is one of the most important specifications of an imaging system. Recent results in quantum parameter estimation theory reveal that an arbitrarily small distance between two incoherent point sources can always be efficiently determined through the use of a spatial mode sorter. However, extending this procedure to a general object consisting of many incoherent point sources remains challenging, due to the intrinsic complexity of multi-parameter estimation problems. Here, we generalize the Richardson-Lucy (RL) deconvolution algorithm to address this challenge. We simulate its application to an incoherent confocal microscope, with a Zernike spatial mode sorter replacing the pinhole used in a conventional confocal microscope. We test different spatially incoherent objects of arbitrary geometry, and we find that the resolution enhancement of sorter-based microscopy is on average over 30% higher than that of a conventional confocal microscope using the standard RL deconvolution algorithm. Our method could potentially be used in diverse applications such as fluorescence microscopy and astronomical imaging.

physics.optics↗

arXiv2021

Enhanced on-chip frequency measurement using weak value amplification

We present an integrated design to precisely measure optical frequency using weak value amplification with a multi-mode interferometer. The technique involves introducing a weak perturbation to the system and then post-selecting the data in such a way that the signal is amplified without amplifying the technical noise, as has previously been demonstrated in a free-space setup. We demonstrate the advantages of a Bragg grating with two band gaps for obtaining simultaneous, stable high transmission and high dispersion. We numerically model the interferometer in order to demonstrate the amplification effect. The device is shown to have advantages over both the free-space implementation and other methods of measuring optical frequency on a chip, such as an integrated Mach-Zehnder interferometer.

quant-ph↗

arXiv2021

Experimental demonstration of superresolution of partially coherent light sources using parity sorting

Analyses based on quantum metrology have shown that the ability to localize the positions of two incoherent point sources can be significantly enhanced through the use of mode sorting. Here we theoretically and experimentally investigate the effect of partial coherence on the sub-diffraction limit localization of two sources based on parity sorting. With the prior information of a negative and real-valued degree of coherence, higher Fisher information is obtained than that for the incoherent case. Our results pave the way to clarifying the role of coherence in quantum limited metrology.

physics.optics↗

arXiv2021

Stochastic Path Integral Analysis of the Continuously Monitored Quantum Harmonic Oscillator

We consider the evolution of a quantum simple harmonic oscillator in a general Gaussian state under simultaneous time-continuous weak position and momentum measurements. We deduce the stochastic evolution equations for position and momentum expectation values and the covariance matrix elements from the system's characteristic function. By generalizing the Chantasri-Dressel-Jordan (CDJ) formalism (Chantasri et al.~2013 and 2015) to this continuous variable system, we construct its stochastic Hamiltonian and action. Action extremization gives us the equations for the most-likely readout paths and quantum trajectories. For steady states of the covariance matrix elements, the analytical solutions for these most-likely paths are obtained. Using the CDJ formalism we calculate final state probability densities exactly starting from any initial state. We also demonstrate the agreement between the optimal path solutions and the averages of simulated clustered stochastic trajectories. Our results provide insights into the time dependence of the mechanical energy of the system during the measurement process, motivating their importance for quantum measurement engine/refrigerator experiments.

quant-ph↗

arXiv2021

Quantum system dynamics with a weakly nonlinear Josephson junction bath

We investigate the influence of a weakly nonlinear Josephson bath consisting of a chain of Josephson junctions on the dynamics of a small quantum system (LC oscillator). Focusing on the regime where the charging energy is the largest energy scale, we perturbatively calculate the correlation function of the Josephson bath to the leading order in the Josephson energy divided by the charging energy while keeping the cosine potential exactly. When the variation of the charging energy along the chain ensures fast decay of the bath correlation function, the dynamics of the LC oscillator that is weakly and capacitively coupled to the Josephson bath can be solved through the Markovian master equation. We establish a duality relation for the Josephson bath between the regimes of large charging and Josephson energies respectively. The results can be applied to cases where the charging energy either is nonuniformly engineered or disordered in the chain. Furthermore, we find that the Josephson bath may become non-Markovian when the temperature is increased beyond the zero-temperature limit in that the bath correlation function gets shifted by a constant and does not decay with time.

quant-ph↗

arXiv2021

Entanglement-Preserving Limit Cycles from Sequential Quantum Measurements and Feedback

Entanglement generation and preservation is a key task in quantum information processing, and a variety of protocols exist to entangle remote qubits via measurement of their spontaneous emission. We here propose feedback methods, based on monitoring the fluorescence of two qubits and using only local pi-pulses for control, to increase the yield and/or lifetime of entangled two-qubit states. Specifically, we describe a protocol based on photodetection of spontaneous emission (i.e. using quantum jump trajectories) which allows for entanglement preservation via measurement undoing, creating a limit cycle around a Bell states. We then demonstrate that a similar modification can be made to a recent feedback scheme based on homodyne measurement (i.e. using diffusive quantum trajectories), [L. S. Martin and K. B. Whaley, arXiv:1912.00067] in order to increase the lifetime of the entanglement it creates. Our schemes are most effective for high measurement efficiencies, and the impact of less-than-ideal measurement efficiency is quantified. The method we describe here combines proven techniques in a novel way, complementing existing protocols, and offering a pathway towards generating and protecting entangled states so that they may be used in various applications on demand.

quant-ph↗

arXiv2020

Always-On Quantum Error Tracking with Continuous Parity Measurements

We investigate quantum error correction using continuous parity measurements to correct bit-flip errors with the three-qubit code. Continuous monitoring of errors brings the benefit of a continuous stream of information, which facilitates passive error tracking in real time. It reduces overhead from the standard gate-based approach that periodically entangles and measures additional ancilla qubits. However, the noisy analog signals from continuous parity measurements mandate more complicated signal processing to interpret syndromes accurately. We analyze the performance of several practical filtering methods for continuous error correction and demonstrate that they are viable alternatives to the standard ancilla-based approach. As an optimal filter, we discuss an unnormalized (linear) Bayesian filter, with improved computational efficiency compared to the related Wonham filter introduced by Mabuchi [New J. Phys. 11, 105044 (2009)]. We compare this optimal continuous filter to two practical variations of the simplest periodic boxcar-averaging-and-thresholding filter, targeting real-time hardware implementations with low-latency circuitry. As variations, we introduce a non-Markovian ``half-boxcar'' filter and a Markovian filter with a second adjustable threshold; these filters eliminate the dominant source of error in the boxcar filter, and compare favorably to the optimal filter. For each filter, we derive analytic results for the decay in average fidelity and verify them with numerical simulations.

quant-ph↗