arXiv subjects

Andrew N. Jordan

Publications and source records attributed to Andrew N. Jordan.

At least 127 records · Page 7Linked to original sources

arXiv2016

Quantum trajectories and their statistics for remotely entangled quantum bits

We experimentally and theoretically investigate the quantum trajectories of jointly monitored transmon qubits embedded in spatially separated microwave cavities. Using nearly quantum-noise limited superconducting amplifiers and an optimized setup to reduce signal loss between cavities, we can efficiently track measurement-induced entanglement generation as a continuous process for single realizations of the experiment. The quantum trajectories of transmon qubits naturally split into low and high entanglement classes corresponding to half-parity collapse. The distribution of concurrence is found at any given time and we explore the dynamics of entanglement creation in the state space. The distribution exhibits a sharp cut-off in the high concurrence limit, defining a maximal concurrence boundary. The most likely paths of the qubits' trajectories are also investigated, resulting in three probable paths, gradually projecting the system to two even subspaces and an odd subspace. We also investigate the most likely time for the individual trajectories to reach their most entangled state, and find that there are two solutions for the local maximum, corresponding to the low and high entanglement routes. The theoretical predictions show excellent agreement with the experimental entangled qubit trajectory data.

quant-ph↗

arXiv2015

Anatomy of Fluorescence: Quantum trajectory statistics from continuously measuring spontaneous emission

We investigate the continuous quantum measurement of a superconducting qubit undergoing fluorescence. The fluorescence of the qubit is detected via a phase-preserving heterodyne measurement, giving the fluorescence quadrature signals as two continuous qubit readout results. By using the stochastic path integral approach to the measurement physics, we derive most likely paths between boundary conditions on the state, and compute approximate time correlation functions between all stochastic variables via diagrammatic perturbation theory. We focus on paths that increase in energy during the continuous measurement. Our results are compared to Monte Carlo numerical simulation of the trajectories, and we find close agreement between direct simulation and theory. We generalize this analysis to arbitrary diffusive quantum systems that are continuously monitored.

quant-ph↗

arXiv2015

Electrical Current from Quantum Vacuum Fluctuations in Nano-engines

We theoretically investigate a quantum dot coupled to fermionic (electronic) leads and show how zero-point quantum fluctuations stemming from bosonic environments permit the rectification of the current. The bosonic baths are either external impedances modeled as tunable transmission lines or LC resonators (single-mode cavities). Voltage fluctuations stemming from the external impedances at zero temperature are described through harmonic oscillators (photon-like excitations) then producing the quantum vacuum fluctuations. The differing sizes of the zero-point fluctuations of the quantum vacuum break the spatial symmetry of the system if the quantum dot is coupled to two reservoirs or two junctions with different bosonic environments. We consider current rectification and power production when the system is operated as a heat engine in both non-resonant and resonant sequential tunneling cases.

cond-mat.mes-hall↗

arXiv2015

Experimentally quantifying the advantages of weak-value-based metrology

We experimentally investigate the relative advantages of implementing weak-value-based metrology versus standard methods. While the techniques outlined herein apply more generally, we measure small optical beam deflections both using a Sagnac interferometer with a monitored dark port (the weak-value-based technique), and by focusing the entire beam to a split detector (the standard technique). By introducing controlled external transverse detector modulations and transverse beam deflection momentum modulations, we quantify the mitigation of these sources in the weak-value-based experiment versus the standard focusing experiment. The experiments are compared using a combination of deterministic and stochastic methods. In all cases, the weak-values technique performs the same or better than the standard technique by up to two orders of magnitude in precision for our parameters. We further measure the statistical efficiency of the weak-values-based technique. By postselecting on $1\%$ of the photons, we obtain $99\%$ of the available Fisher information of the beam deflection parameter.

quant-ph↗

arXiv2015

Stochastic path integral formalism for continuous quantum measurement

We generalize and extend the stochastic path integral formalism and action principle for continuous quantum measurement introduced in [A. Chantasri, J. Dressel and A. N. Jordan, Phys. Rev. A {\bf 88}, 042110 (2013)], where the optimal dynamics, such as the most-likely paths, are obtained by extremizing the action of the path integral. In this work, we apply exact functional methods as well as develop a perturbative approach to investigate the statistical behaviour of continuous quantum measurement, with examples given for the qubit case. For qubit measurement with zero qubit Hamiltonian, we find analytic solutions for average trajectories and their variances while conditioning on fixed initial and final states. For qubit measurement with unitary evolution, we use the perturbation method to compute expectation values, variances, and multi-time correlation functions of qubit trajectories in the short-time regime. Moreover, we consider continuous qubit measurement with feedback control, using the action principle to investigate the global dynamics of its most-likely paths, and finding that in an ideal case, qubit state stabilization at any desired pure state is possible with linear feedback. We also illustrate the power of the functional method by computing correlation functions for the qubit trajectories with a feedback loop to stabilize the qubit Rabi frequency.

quant-ph↗

arXiv2015

Effect of incoherent scattering on three-terminal quantum Hall thermoelectrics

A three-terminal conductor presents peculiar thermoelectric and thermal properties in the quantum Hall regime: it can behave as a symmetric rectifier and as an ideal thermal diode. These properties rely on the coherent propagation along chiral edge channels. We investigate the effect of breaking the coherent propagation by the introduction of a probe terminal. It is shown that chiral effects not only survive the presence of incoherence but they can even improve the thermoelectric performance in the totally incoherent regime.

cond-mat.mes-hall↗

arXiv2015

Weak values are quantum: you can bet on it

The outcome of a weak quantum measurement conditioned to a subsequent postselection (a weak value protocol) can assume peculiar values. These results cannot be explained in terms of conditional probabilistic outcomes of projective measurements. However, a classical model has been recently put forward that can reproduce peculiar expectation values, reminiscent of weak values. This led the authors of that work to claim that weak values have an entirely classical explanation. Here we discuss what is quantum about weak values with the help of a simple model based on basic quantum mechanics. We first demonstrate how a classical theory can indeed give rise to non-trivial conditional values, and explain what features of weak values are genuinely quantum. We finally use our model to outline some main issues under current research.

quant-ph↗

arXiv2015

Three-terminal heat engine and refrigerator based on superlattices

We propose a three terminal heat engine based on semiconductor superlattices for energy harvesting. The periodicity of the superlattice structure creates an energy miniband, giving an energy window for allowed electron transport. We find that this device delivers a large power, nearly twice than the heat engine based on quantum wells, with a small reduction of efficiency. This engine also works as a refrigerator in a different regime of the system's parameters. The thermoelectric performance of the refrigerator is analyzed, including the cooling power and coefficient of performance in the optimized condition. We also calculate phonon heat current through the system, and explore the reduction of phonon heat current compared to the bulk material. The direct phonon heat current is negligible at low temperatures, but dominates over the electronic at room temperature and we discuss ways to reduce it.

cond-mat.mes-hall↗

arXiv2015

Heat diode and engine based on quantum Hall edge states

We investigate charge and energy transport in a three-terminal quantum Hall conductor. The peculiar properties of chiral propagation along the edges of the sample have important consequences on the response to thermal biases. Based on the separation of charge and heat flows, thermoelectric conversion and heat rectification can be manipulated by tuning the scattering at gate-modulated constrictions. Chiral motion in a magnetic field allows for a different behaviour of left- and right-moving carriers giving rise to thermal rectification by redirecting the heat flows. We propose our system both as an efficient heat-to-work converter and as a heat diode.

cond-mat.mes-hall↗

arXiv2015

Power-recycled weak-value-based metrology

We improve the precision of the interferometric weak-value-based beam deflection measurement by introducing a power recycling mirror, creating a resonant cavity. This results in \emph{all} the light exiting to the detector with a large deflection, thus eliminating the inefficiency of the rare postselection. The signal-to-noise ratio of the deflection is itself magnified by the weak value. We discuss ways to realize this proposal, using a transverse beam filter and different cavity designs.

quant-ph↗

arXiv2015

Chiral thermoelectrics with quantum Hall edge states

The thermoelectric properties of a three-terminal quantum Hall conductor are investigated. We identify a contribution to the thermoelectric response that relies on the chirality of the carrier motion rather than on spatial asymmetries. The Onsager matrix becomes maximally asymmetric with configurations where either the Seebeck or the Peltier coefficients are zero while the other one remains finite. Reversing the magnetic field direction exchanges these effects, which originate from the chiral nature of the quantum Hall edge states. The possibility to generate spin-polarized currents in quantum spin Hall samples is discussed.

cond-mat.mes-hall↗

arXiv2015

Thermoelectric energy harvesting with quantum dots

We review recent theoretical work on thermoelectric energy harvesting in multi-terminal quantum-dot setups. We first discuss several examples of nanoscale heat engines based on Coulomb-coupled conductors. In particular, we focus on quantum dots in the Coulomb-blockade regime, chaotic cavities and resonant tunneling through quantum dots and wells. We then turn towards quantum-dot heat engines that are driven by bosonic degrees of freedom such as phonons, magnons and microwave photons. These systems provide interesting connections to spin caloritronics and circuit quantum electrodynamics.

cond-mat.mes-hall↗

arXiv2015

Can a Dove prism change the past of a single photon?

We reexamine the thought experiment and real experiment of Vaidman et al., by placing Dove prisms in the nested Mach-Zehnder interferometer arms. In those previous works, the criterion of whether a single photon was present, or not, was the presence of a "weak trace", indicating the presence of a nonzero weak value. This was verified by slightly varying the mirror angle at a given frequency, which was then detected on a position sensitive detector at the oscillation frequency. We show the presence of the Dove prisms gives identical weak values everywhere to the previous configuration because the prisms change neither the path difference, nor the mode profile in the aligned case. Nevertheless, the same slight variations of the interferometer mirrors now give a signal at the first mirror of the nested interferometer. We can interpret this result as a misaligned optical interferometer, whose detailed response depends on the stability of the elements, or as the detector coupling to a nonzero effective weak value.

quant-ph↗

arXiv2014

Heisenberg scaling with weak measurement: A quantum state discrimination point of view

We examine the results of the paper "Precision metrology using weak measurements", [Zhang, Datta, and Walmsley, arXiv:1310.5302] from a quantum state discrimination point of view. The Heisenberg scaling of the photon number for the precision of the interaction parameter between coherent light and a spin one-half particle (or pseudo-spin) has a simple interpretation in terms of the interaction rotating the quantum state to an orthogonal one. In order to achieve this scaling, the information must be extracted from the spin rather than from the coherent state of light, limiting the applications of the method to phenomena such as cross-phase modulation. We next investigate the effect of dephasing noise, and show a rapid degradation of precision, in agreement with general results in the literature concerning Heisenberg scaling metrology. We also demonstrate that a von Neumann-type measurement interaction can display a similar effect.

quant-ph↗

arXiv2014

Quantum Nernst engines

We theoretically propose Nernst engines based on quantum Hall edge states. We identify a setup that exhibits an extreme asymmetry between the off-diagonal Onsager coefficients for heat and charge transport. In terms of thermodynamic efficiency, this engine outperforms a recently proposed classical Nernst engine. A second setup using an anti-dot is found to be more efficient as energy filtering becomes less strong.

cond-mat.mes-hall↗

arXiv2014

Colloquium: Understanding Quantum Weak Values: Basics and Applications

Since its introduction 25 years ago, the quantum weak value has gradually transitioned from a theoretical curiosity to a practical laboratory tool. While its utility is apparent in the recent explosion of weak value experiments, its interpretation has historically been a subject of confusion. Here a pragmatic introduction to the weak value in terms of measurable quantities is presented, along with an explanation for how it can be determined in the laboratory. Further, its application to three distinct experimental techniques is reviewed. First, as a large interaction parameter it can amplify small signals above technical background noise. Second, as a measurable complex value it enables novel techniques for direct quantum state and geometric phase determination. Third, as a conditioned average of generalized observable eigenvalues it provides a measurable window into nonclassical features of quantum mechanics. In this selective review, a single experimental configuration to discuss and clarify each of these applications is used.

quant-ph↗

arXiv2013

An operational approach to indirectly measuring tunneling time

The tunneling time through an arbitrary bounded one-dimensional barrier is investigated using the dwell time operator. We relate the tunneling time to the conditioned average of the dwell time operator because of the natural post-selection in the case of successful tunneling. We discuss an indirect measurement by timing the particle, and show we are able to reconstruct the conditioned average value of the dwell time operator by applying the contextual values formalism for generalized measurements based on the physics of Larmor precession. The experimentally measurable tunneling time in the weak interaction limit is given by the weak value of the dwell time operator plus a measurement-context dependent disturbance term. We show how the expectation value and higher moments of the dwell time operator can be extracted from measurement data of the particle's spin.

quant-ph↗

arXiv2013

Correlations of heat and charge currents in quantum-dot thermoelectric engines

We analyze the noise properties of both electric charge and heat currents as well as their correlations in a quantum-dot based thermoelectric engine. The engine is a three-terminal conductor with crossed heat and charge flows where heat fluctuations can be monitored by a charge detector. We investigate the mutual influence of charge and heat dynamics and how it is manifested in the current and noise properties. In the presence of energy-dependent tunneling, operating conditions are discussed where a charge current can be generated by heat conversion. In addition, heat can be pumped into the hot source by driving a charge current in the coupled conductor. An optimal configuration is found for structures in which the energy dependence of tunneling maximizes asymmetric transmission with maximal charge-heat cross-correlations. Remarkably, at a voltage that stalls the heat engine we find that in the optimal case the non-equilibrium state is maintained by fluctuations in the heat and charge current only.

cond-mat.mes-hall↗