arXiv subjects

Angel Lozano

Publications and source records attributed to Angel Lozano.

At least 19 recordsLinked to original sources

arXiv2026

Site-Specific MIMO Channel Generation via Diffusion and Flow Matching: Fidelity, Efficiency, and Downstream Utility

This paper explores the use of generative models to synthesize high-quality, site-specific multiple-input multiple-output (MIMO) channel data, addressing the high cost of the extensive measurement campaigns required to acquire real-world data for AI-native wireless networks. Two location-conditioned generative paradigms are compared: a conditional denoising diffusion implicit model (cDDIM), and a conditional flow matching model (cFMM). Both these models generate MIMO channel matrices conditioned on user coordinates, to preserve the spatial structure of the deployment site. The approaches are evaluated across three dimensions: statistical fidelity (including beam consistency and effective rank), generation efficiency, and utility in downstream tasks such as channel-state information compression and beam alignment. Results across diverse propagation scenarios (28 GHz and 3.5 GHz, both line-of-sight and non-line-of-sight) demonstrate that both models accurately capture site-specific characteristics, even when trained on scarce ground-truth data. Notably, cFMM achieves a quality comparable to cDDIM with roughly an order of magnitude less inference time. Augmenting scarce site-specific datasets with these synthetic channels yields hefty performance gains in downstream physical layer tasks compared to using scarce data alone or stochastic channels.

cs.IT↗

arXiv2026

Two-Timescale Design for Downlink Multiuser Transmission with Dynamic Metasurface Antennas

Dynamic metasurface antennas (DMAs) promise to relieve massive multiple-input multiple-output architectures from their high energy consumption and hardware costs. This paper proposes a two-timescale design for downlink multiuser transmission via DMAs, a design that balances pilot overhead, complexity, and spectral efficiency. At the onset of each frame, the DMA coefficients are configured based only on statistical channel-state information (CSI), a process for which the paper introduces an optimization framework that is shown to outperform the widely used stochastic successive convex approximation method. Then, within each frame, the digital precoder is updated at each slot, based on the optimized DMA coefficients and the effective lower-dimensional instantaneous CSI. The weighted minimum mean-squared error method is applied for this short-term optimization and, for the special case of single-user transmission, a closed-form solution for the digital precoder is provided. Performance evaluations demonstrate that the proposed two-timescale design can be an attractive ingredient for future wireless networks.

cs.IT↗

arXiv2026

Super-Beamforming in Holographic MIMO

The conventional linear scaling of beamforming gain with the number of antennas $N$ is not a fundamental physical limitation, but rather a consequence of the half-wavelength spacing that minimizes mutual coupling. Relaxing this constraint enables gains that, in the vicinity of the array axis, exceed those of uncoupled arrays. This paper shows that mutual coupling facilitates the synthesis of super-beams whose widths scale as $1/N$, in contrast to the conventional $1/\sqrt{N}$. These narrower beams achieve a quadratic gain scaling with $N$ provided antenna losses remain sufficiently small, decaying at least exponentially with growing $N$ and polynomially with decreasing spacing. Notably, this gain enhancement does not necessarily require vanishing spacings; it may also emerge for spacings slightly below half wavelength as the array aperture increases.

cs.IT↗

arXiv2026

Near-field channel estimation via wavefront parameterization

This paper deals with the estimation of multiantenna channels in the line-of-sight conditions that are prevalent in the near field. By expressing the curved wavefront as a polynomial via a power series expansion of a sphere, the estimation of the channel over the array can be formulated as a multidimensional polynomial phase estimation problem. The application of a newly developed polynomial phase estimator, able of handling arbitrary dimensions and polynomial degrees, yields a superior tradeoff between channel estimation accuracy and complexity.

eess.SP↗

arXiv2026

Cramer-Rao Bound for Arbitrarily Constrained Sets

This paper presents a Cramer-Rao bound (CRB) for the estimation of parameters confined to an arbitrary set. Unlike existing results that rely on equality or inequality constraints, manifold structures, or the nonsingularity of the Fisher information matrix, the derived CRB applies to any constrained set and holds for any estimation bias and any Fisher information matrix. The key geometric object governing the new CRB is the tangent cone to the constraint set, whose span determines how the constraints affect the estimation accuracy. This CRB subsumes, unifies, and generalizes known special cases, offering an intuitive and broadly applicable framework to characterize the minimum mean-square error of constrained estimators.

eess.SP↗

arXiv2026

Beamforming Gain with Nonideal Phase Shifters

This research sets forth a universal framework to characterize the beamforming gain achievable with arbitrarily nonideal phase shifters. Precisely, the maximum possible shortfall relative to the gain attainable with ideal phase shifters is established. Such shortfall is shown to be fundamentally determined by the perimeter of the convex hull of the set of feasible beamforming coefficients on the complex plane. This result holds regardless of whether the beamforming is at the transmitter, at the receiver, or at a reconfigurable intelligent surface. In i.i.d. fading channels, the shortfall hardens to the maximum possible shortfall as the number of antennas grows.

eess.SP↗

arXiv2025

Optimum Discrete Beamforming via Minkowski Sum of Polygons

This letter casts the problem of optimum discrete beamforming as the computation of the Minkowski sum of convex polygons, which is itself a convex polygon. The number of vertices of the latter is at most the sum of the number of vertices of the original polygons, enabling its efficient computation. This original and intuitive formulation confirms that the optimum beamforming solution can be found efficiently.

eess.SP↗

arXiv2025

Data-Driven Deployment of Reconfigurable Intelligent Surfaces in Cellular Networks

This paper presents a fully automated, data-driven framework for the large-scale deployment of reconfigurable intelligent surfaces (RISs) in cellular networks. Leveraging physically consistent ray tracing and empirical data from a commercial deployment in the UK, the proposed method jointly optimizes RIS placement, orientation, configuration, and base station beamforming in dense urban environments across frequency bands (corresponding to 4G, 5G, and a hypothetical 6G system). Candidate RIS locations are identified via reflection- and scattering-based heuristics using calibrated electromagnetic models within the Sionna Ray Tracing (RT) engine. Outage users are clustered to reduce deployment complexity, and the tradeoff between coverage gains and infrastructure cost is systematically evaluated. It is shown that achieving meaningful coverage improvement in urban areas requires a dense deployment of large-aperture RIS units, raising questions about cost-effectiveness. To facilitate reproducibility and future research, the complete simulation framework and RIS deployment algorithms are provided as open-source software.

cs.IT↗

arXiv2025

Site-Specific RIS Deployment in Cellular Networks via Calibrated Ray Tracing

This work introduces a fully-automated RIS deployment strategy validated through a digital twin, powered by Sionna ray tracing, of a UK city. On a scene calibrated with measured data, the method jointly optimizes RIS placement, orientation, configuration, and BS beamforming across 4G, 5G, and hypothetical 6G frequencies. Candidate RIS sites are identified via scattering-based rays, while user clustering reduces deployment overhead. Results show that meaningful coverage enhancement requires dense, large-aperture RIS deployments, raising questions about the practicality and cost of large-scale RIS adoption.

cs.IT↗

arXiv2025

Beamforming Saturation in Two-Timescale RIS-assisted Communication

This paper considers wireless communication assisted by a reconfigurable intelligent surface (RIS), focusing on the two-timescale approach, in which the RIS phase shifts are optimized based on channel statistics to mitigate the overheads associated with channel estimation. It is shown that, while the power captured by the RIS scales linearly with the number of its elements, the two-timescale beamforming gain upon re-radiation towards the receiver saturates rapidly as the number of RIS elements increases, for a broad class of power angular spectra (PAS). The ultimate achievable gain is determined by the decay rate of the PAS in the angular domain, which directly influences how rapidly spatial correlations between RIS elements diminish. The implications of this saturation on the effectiveness of RIS-assisted communications are discussed.

cs.IT↗

arXiv2025

Pilot-to-Data Power Ratio in RIS-Assisted Multiantenna Communication

The optimization of the \gls{pdpr} is a recourse that helps wireless systems to acquire channel state information while minimizing the pilot overhead. While the optimization of the \gls{pdpr} in cellular networks has been studied extensively, the effect of the \gls{pdpr} in \gls{ris}-assisted networks has hardly been examined. This paper tackles this optimization when the communication is assisted by a RIS whose phase shifts are adjusted on the basis of the statistics of the channels. For a setting representative of a macrocellular deployment, the benefits of optimizing the PDPR are seen to be significant over a broad range of operating conditions. These benefits, demonstrated through the ergodic minimum mean squared error, for which a closed-form solution is derived, become more pronounced as the number of RIS elements and/or the channel coherence grow large.

cs.IT↗

arXiv2025

Evaluating the Performance of Reconfigurable Intelligent Base Stations through Ray Tracing

Massive multiple-input multiple-output (mMIMO) is a key capacity-boosting technology in 5G wireless systems. To reduce the number of radio frequency (RF) chains needed in such systems, a novel approach has recently been introduced involving an antenna array supported by a reconfigurable intelligent surface. This arrangement, known as a reconfigurable intelligent base station (RIBS), offers performance comparable to that of a traditional mMIMO array, but with significantly fewer RF chains. Given the growing importance of precise, location-specific performance prediction, this paper evaluates the performance of an RIBS system by means of the SIONNA ray-tracing module. That performance is contrasted against results derived from a statistical 3GPP-compliant channel model, optimizing power and RIS configuration to maximize the sum spectral efficiency. Ray tracing predicts better performance than the statistical model in the evaluated scenario, suggesting the potential of site-specific modeling. However, empirical validation is needed to confirm this advantage.

cs.IT↗

arXiv2025

Mutual Coupling in Holographic MIMO: Physical Modeling and Information-Theoretic Analysis

This paper presents a comprehensive framework for holographic multiantenna communication, a paradigm that integrates both wide apertures and closely spaced antennas relative to the wavelength. The presented framework is physically grounded, enabling information-theoretic analyses that inherently incorporate correlation and mutual coupling among the antennas. This establishes the combined effects of correlation and coupling on the information-theoretic performance limits across SNR levels. Additionally, it reveals that, by suitably selecting the individual antenna patterns, mutual coupling can be harnessed to either reinforce or counter spatial correlations as appropriate for specific SNRs, thereby improving the performance.

cs.IT↗

arXiv2024

Multidimensional Polynomial Phase Estimation

An estimation method is presented for polynomial phase signals, i.e., those adopting the form of a complex exponential whose phase is polynomial in its indices. Transcending the scope of existing techniques, the proposed estimator can handle an arbitrary number of dimensions and an arbitrary set of polynomial degrees along each dimension; the only requirement is that the number of observations per dimension exceeds the highest degree thereon. Embodied by a highly compact sequential algorithm, this estimator exhibits a strictly linear computational complexity in the number of observations, and is efficient at high signal-to-noise ratios (SNRs). To reinforce the performance at low and medium SNRs, where any phase estimator is bound to be hampered by the inherent ambiguity caused by phase wrappings, suitable functionalities are incorporated and shown to be highly effective.

eess.SP↗

arXiv2024

A Reinforcement Learning Approach for Wildfire Tracking with UAV Swarms

Suitably equipped with cameras and sensors, uncrewed aerial vehicles (UAVs) can be instrumental for wildfire prediction, tracking, and monitoring, provided that uninterrupted connectivity can be guaranteed even if some of the ground access points (APs) are damaged by the fire itself. A cell-free network structure, with UAVs connecting to a multiplicity of APs, is therefore ideal in terms of resilience. This work proposes a trajectory optimization framework for a UAV swarm tracking a wildfire while maintaining cell-free connectivity with ground APs. Such optimization entails a constant repositioning of the multiplicity of UAVs as the fire evolves to ensure that the best possible view is acquired and transmitted reliably, while respecting altitude limits, avoiding collisions, and proceeding to recharge batteries as needed. Given the complexity and time-varying nature of this multi-UAV trajectory optimization, reinforcement learning is leveraged, specifically the twin-delayed deep deterministic policy gradient algorithm. The approach is shown to be highly effective for wildfire tracking and coverage and could be likewise applicable to survey other natural and man-made phenomena, including weather events, earthquakes, or chemical spills.

eess.SP↗

arXiv2024

Spatially Consistent Air-to-Ground Channel Modeling via Generative Neural Networks

This article proposes a generative neural network architecture for spatially consistent air-to-ground channel modeling. The approach considers the trajectories of uncrewed aerial vehicles along typical urban paths, capturing spatial dependencies within received signal strength (RSS) sequences from multiple cellular base stations (gNBs). Through the incorporation of conditioning data, the model accurately discriminates between gNBs and drives the correlation matrix distance between real and generated sequences to minimal values. This enables evaluating performance and mobility management metrics with spatially (and by extension temporally) consistent RSS values, rather than independent snapshots. For some tasks underpinned by these metrics, say handovers, consistency is essential.

cs.IT↗

arXiv2023

RIS in Indoor Environments: Benchmarking Against Ambient Propagation

The improvements in received signal power brought about by a reflective intelligent surface (RIS) might be overstated if background propagation mechanisms such as reflections, scattering, and diffraction are ignored. This paper addresses this issue for non-line-of-sight indoor settings, contrasting the energy conveyed by an RIS with the energy already reaching the receiver through environmental reflections. And, to prevent artifacts, such naturally occurring reflections are not modeled via approximate methods, but rather through a rigorous physics-based formulation. It is found that the environment contributes a level of energy commensurate with that of an ideal RIS of considerable size; to have substantial impact, an actual RIS would have to generously exceed this size.

cs.IT↗

arXiv2023

Hybrid Arrays: How Many RF Chains Are Required to Prevent Beam Squint?

With increasing frequencies, bandwidths, and array apertures, the phenomenon of beam squint arises as a serious impairment to beamforming. Fully digital arrays with true time delay per antenna element are a potential solution, but they require downconversion at each element. This paper shows that hybrid arrays can perform essentially as well as digital arrays once the number of radio-frequency chains exceeds a certain threshold that is far below the number of elements. The result is robust, holding also for suboptimum but highly appealing beamspace architectures.

cs.IT↗