arXiv subjects

Angel Lozano

Publications and source records attributed to Angel Lozano.

At least 37 records · Page 2Linked to original sources

arXiv2023

Hybrid Arrays: How Many RF Chains Are Required to Prevent Beam Squint?

With increasing frequencies, bandwidths, and array apertures, the phenomenon of beam squint arises as a serious impairment to beamforming. Fully digital arrays with true time delay per antenna element are a potential solution, but they require downconversion at each element. This paper shows that hybrid arrays can perform essentially as well as digital arrays once the number of radio-frequency chains exceeds a certain threshold that is far below the number of elements. The result is robust, holding also for suboptimum but highly appealing beamspace architectures.

cs.IT↗

arXiv2023

Wide-Aperture MIMO via Reflection off a Smooth Surface

This paper provides a deterministic channel model for a scenario where wireless connectivity is established through a reflection off a smooth planar surface of an infinite extent. The developed model is rigorously built upon the physics of wave propagation and is as precise as tight are the unboundedness and smoothness assumptions on the surface. This model allows establishing how line-of-sight multiantenna communication is altered by a reflection off an electrically large surface, a situation of high interest for mmWave and terahertz frequencies.

cs.IT↗

arXiv2023

25 Years of Signal Processing Advances for Multiantenna Communications

Wireless communication technology has progressed dramatically over the past 25 years, in terms of societal adoption as well as technical sophistication. In 1998, mobile phones were still in the process of becoming compact and affordable devices that could be widely utilized in both developed and developing countries. There were "only" 300 million mobile subscribers in the world [1]. Cellular networks were among the first privatized telecommunication markets, and competition turned the devices into fashion accessories with attractive designs that could be individualized. The service was circumscribed to telephony and text messaging, but it was groundbreaking in that, for the first time, telecommunication was between people rather than locations. Wireless networks have changed dramatically over the past few decades, enabling this revolution in service provisioning and making it possible to accommodate the ensuing dramatic growth in traffic. There are many contributing components, including new air interfaces for faster transmission, channel coding for enhanced reliability, improved source compression to remove redundancies, and leaner protocols to reduce overheads. Signal processing is at the core of these improvements, but nowhere has it played a bigger role than in the development of multiantenna communication. This article tells the story of how major signal processing advances have transformed the early multiantenna concepts into mainstream technology over the past 25 years. The story therefore begins somewhat arbitrarily in 1998. A broad account of the state-of-the-art signal processing techniques for wireless systems by 1998 can be found in [2], and its contrast with recent textbooks such as [3]-[5] reveals the dramatic leap forward that has taken place in the interim.

eess.SP↗

arXiv2022

On Landau's Eigenvalue Theorem for Line-of-Sight MIMO Channels

An alternative derivation is provided for the degrees of freedom (DOF) formula on line-of-sight (LOS) channels via Landau's eigenvalue theorem for bandlimited signals. Compared to other approaches, Landau's theorem provides a general framework to compute the DOF in arbitrary environments, this framework is herein specialized to LOS propagation. The development shows how the spatially bandlimited nature of the channel relates to its geometry under the paraxial approximation that applies to most LOS settings of interest.

cs.IT↗

arXiv2022

Coexistence of UAVs and Terrestrial Users in Millimeter-Wave Urban Networks

5G millimeter-wave (mmWave) cellular networks are in the early phase of commercial deployments and present a unique opportunity for robust, high-data-rate communication to unmanned aerial vehicles (UAVs). A fundamental question is whether and how mmWave networks designed for terrestrial users should be modified to serve UAVs. The paper invokes realistic cell layouts, antenna patterns, and channel models trained from extensive ray tracing data to assess the performance of various network alternatives. Importantly, the study considers the addition of dedicated uptilted rooftop-mounted cells for aerial coverage, as well as novel spectrum sharing modes between terrestrial and aerial network operators. The effect of power control and of multiuser multiple-input multiple-output are also studied.

eess.SY↗

arXiv2022

Line-of-Sight MIMO via Reflection From a Smooth Surface

We provide a deterministic channel model for a scenario where wireless connectivity is established through a reflection from a planar smooth surface of an infinite extent. The developed model is rigorously built upon the physics of wave propagation, and is as precise as tight are the unboundedness and smoothness assumptions on the surface. This model allows establishing that line-of-sight spatial multiplexing can take place via reflection off an electrically large surface, a situation of high interest for mmWave and terahertz frequencies.

cs.IT↗

arXiv2021

1-Bit MIMO for Terahertz Channels

This paper tackles the problem of single-user multiple-input multiple-output communication with 1-bit digital-to-analog and analog-to-digital converters. With the information-theoretic capacity as benchmark, the complementary strategies of beamforming and equiprobable signaling are contrasted in the regimes of operational interest, and the ensuing spectral efficiencies are characterized. Various canonical channel types are considered, with emphasis on line-of-sight settings under both spherical and planar wavefronts, respectively representative of short and long transmission ranges at mmWave and terahertz frequencies. In all cases, a judicious combination of beamforming and equiprobable signaling is shown to operate within a modest gap from capacity.

cs.IT↗

arXiv2021

Generative Neural Network Channel Modeling for Millimeter-Wave UAV Communication

The millimeter wave bands are being increasingly considered for wireless communication to unmanned aerial vehicles (UAVs). Critical to this undertaking are statistical channel models that describe the distribution of constituent parameters in scenarios of interest. This paper presents a general modeling methodology based on data-training a generative neural network. The proposed generative model has a two-stage structure that first predicts the link state (line-of-sight, non-line-of-sight, or outage), and subsequently feeds this state into a conditional variational autoencoder (VAE) that generates the path losses, delays, and angles of arrival and departure for all the propagation paths. The methodology is demonstrated for 28 GHz air-to-ground channels between UAVs and a cellular system in representative urban environments, with training datasets produced through ray tracing. The demonstration extends to both standard base stations (installed at street level and downtilted) as well as dedicated base stations (mounted on rooftops and uptilted). The proposed approach is able to capture complex statistical relations in the data and it significantly outperforms standard 3GPP models, even after refitting the parameters of those models to the data.

eess.SP↗

arXiv2021

Millimeter-Wave UAV Coverage in Urban Environments

With growing interest in mmWave connectivity for UAVs, a basic question is whether networks intended for terrestrial users can provide sufficient aerial coverage as well. To assess this possibility, the paper proposes a novel evaluation methodology using generative models trained on detailed ray tracing data. These models capture complex propagation characteristics and can be readily combined with antenna and beamforming assumptions. Extensive simulation using these models indicate that standard (street-level and downtilted) base stations at typical microcellular densities can indeed provide satisfactory UAV coverage. Interestingly, the coverage is possible via a conjunction of antenna sidelobes and strong reflections. With sparser deployments, the coverage is only guaranteed at progressively higher altitudes. Additional dedicated (rooftop-mounted and uptilted) base stations strengthen the coverage provided that their density is comparable to that of the standard deployment, and would be instrumental for sparse deployments of the latter.

eess.SP↗

arXiv2021

What Will the Future of UAV Cellular Communications Be? A Flight from 5G to 6G

What will the future of UAV cellular communications be? In this tutorial article, we address such a compelling yet difficult question by embarking on a journey from 5G to 6G and sharing a large number of realistic case studies supported by original results. We start by overviewing the status quo on UAV communications from an industrial standpoint, providing fresh updates from the 3GPP and detailing new 5G NR features in support of aerial devices. We then show the potential and the limitations of such features. In particular, we demonstrate how sub-6 GHz massive MIMO can successfully tackle cell selection and interference challenges, we showcase encouraging mmWave coverage evaluations in both urban and suburban/rural settings, and we examine the peculiarities of direct device-to-device communications in the sky. Moving on, we sneak a peek at next-generation UAV communications, listing some of the use cases envisioned for the 2030s. We identify the most promising 6G enablers for UAV communication, those expected to take the performance and reliability to the next level. For each of these disruptive new paradigms (non-terrestrial networks, cell-free architectures, artificial intelligence, reconfigurable intelligent surfaces, and THz communications), we gauge the prospective benefits for UAVs and discuss the main technological hurdles that stand in the way. All along, we distil our numerous findings into essential takeaways, and we identify key open problems worthy of further study.

cs.IT↗

arXiv2021

Lightweight UAV-based Measurement System for Air-to-Ground Channels at 28 GHz

Wireless communication at millimeter wave frequencies has attracted considerable attention for the delivery of high-bit-rate connectivity to unmanned aerial vehicles (UAVs). However, conducting the channel measurements necessary to assess communication at these frequencies has been challenging due to the severe payload and power restrictions in commercial UAVs. This work presents a novel lightweight (approximately 1.3 kg) channel measurement system at 28 GHz installed on a commercially available UAV. A ground transmitter equipped with a horn antenna conveys sounding signals to a UAV equipped with a lightweight spectrum analyzer. We demonstrate that the measurements can be highly influenced by the antenna pattern as shaped by the UAV's frame. A calibration procedure is presented to correct for the resulting angular variations in antenna gain. The measurement setup is then validated on real flights from an airstrip at distances in excess of 300 m.

eess.SP↗

arXiv2020

Millimeter Wave Channel Modeling via Generative Neural Networks

Statistical channel models are instrumental to design and evaluate wireless communication systems. In the millimeter wave bands, such models become acutely challenging; they must capture the delay, directions, and path gains, for each link and with high resolution. This paper presents a general modeling methodology based on training generative neural networks from data. The proposed generative model consists of a two-stage structure that first predicts the state of each link (line-of-sight, non-line-of-sight, or outage), and subsequently feeds this state into a conditional variational autoencoder that generates the path losses, delays, and angles of arrival and departure for all its propagation paths. Importantly, minimal prior assumptions are made, enabling the model to capture complex relationships within the data. The methodology is demonstrated for 28GHz air-to-ground channels in an urban environment, with training datasets produced by means of ray tracing.

eess.SP↗

arXiv2020

Terahertz Line-Of-Sight MIMO Communication: Theory and Practical Challenges

A relentless trend in wireless communications is the hunger for bandwidth, and fresh bandwidth is only to be found at ever-higher frequencies. While 5G systems are seizing the mmWave band, the attention of researchers is shifting already to the terahertz range. In that distant land of tiny wavelengths, antenna arrays can serve for more than power-enhancing beamforming. Defying lower-frequency wisdom, spatial multiplexing becomes feasible even in line-of-sight conditions. This paper reviews the underpinnings of this phenomenon, and it surveys recent results on the ensuing information-theoretic capacity. Reconfigurable array architectures are put forth that can closely approach such capacity, practical challenges are discussed, and supporting experimental evidence is presented.

eess.SP↗

arXiv2020

Reconfigurable ULAs for Line-of-Sight MIMO Transmission

This paper establishes an upper bound on the capacity of line-of-sight multiantenna channels over all possible antenna arrangements and shows that uniform linear arrays (ULAs) with an SNR-dependent rotation of transmitter or receiver can closely approach such capacity---and in fact achieve it at low and high SNR, and asymptotically in the numbers of antennas. Then, as an alternative to mechanically rotating ULAs, we propose to electronically select among multiple ULAs having a radial disposition at either transmitter or receiver, and we bound the shortfall from capacity as a function of the number of such ULAs. With only three ULAs, properly angled, 96% of the capacity can be achieved. Finally, we further introduce reduced-complexity precoders and linear receivers that capitalize on the structure of the channels spawned by these configurable ULA architectures.

cs.IT↗

arXiv2019

Massive MIMO Forward Link Analysis for Cellular Networks

This paper presents analytical expressions for the signal-to-interference ratio (SIR) and the spectral efficiency in macrocellular networks with massive MIMO conjugate beamforming, both with a uniform and a channel-dependent power allocation. These expressions, which apply to very general network geometries, are asymptotic in the strength of the shadowing. Through Monte-Carlo simulation, we verify their accuracy for relevant network topologies and shadowing strengths. Also, since the analysis does not include pilot contamination, we further gauge through Monte-Carlo simulation the deviation that this phenomenon causes with respect to our results, and hence the scope of the analysis.

cs.IT↗

arXiv2017

Ergodic Spectral Efficiency in MIMO Cellular Networks

This paper shows how the application of stochastic geometry to the analysis of wireless networks is greatly facilitated by (i) a clear separation of time scales, (ii) the abstraction of small-scale effects via ergodicity, and (iii) an interference model that reflects the receiver's lack of knowledge of how each individual interference term is faded. These procedures render the analysis both more manageable and more precise, as well as more amenable to the incorporation of subsequent features. In particular, the paper presents analytical characterizations of the ergodic spectral efficiency of cellular networks with single-user multiple-input multiple-output (MIMO) and sectorization. These characterizations, in the form of easy-to-evaluate expressions, encompass the coverage, the distribution of spectral efficiency over the network locations, and the average thereof.

cs.IT↗

arXiv2017

Low-Complexity MIMO Precoding for Finite-Alphabet Signals

This paper investigates the design of precoders for single-user multiple-input multiple-output (MIMO) channels, and in particular for finite-alphabet signals. Based on an asymptotic expression for the mutual information of channels exhibiting line-of-sight components and rather general antenna correlations, precoding structures that decompose the general channel into a set of parallel subchannel pairs are proposed. Then, a low-complexity iterative algorithm is devised to maximize the sum mutual information of all pairs. The proposed algorithm significantly reduces the computational load of existing approaches with only minimal loss in performance. The complexity savings increase with the number of transmit antennas and with the cardinality of the signal alphabet, making it possible to support values thereof that were unmanageable with existing solutions. Most importantly, the proposed solution does not require instantaneous channel state information (CSI) at the transmitter, but only statistical CSI.

cs.IT↗

arXiv2016

Enclosed mmWave Wearable Networks: Feasibility and Performance

This paper investigates the feasibility of mmWave frequencies for personal networks of wireless wearable devices in enclosed settings (e.g., commuter trains, subways, airplanes, airports, or offices). At these frequencies, specular reflections off surfaces are expected to contribute intended signal power and, simultaneously, to aggravate the interference at the receivers. Meanwhile, blockages by obstacles and people---including the individuals wearing the devices---are expected to shield receivers from interference. With the aid of stochastic geometry and random shape theory, we assess the interplay of surface reflections and blockages for dense deployments of wearable networks equipped with directional antenna arrays in relevant indoor settings.

cs.IT↗