arXiv subjects

Anna K. Swan

Publications and source records attributed to Anna K. Swan.

11 recordsLinked to original sources

arXiv2022

Identifying charge density and dielectric environment of graphene using Raman spectroscopy and deep learning

The impact of the environment on graphene's properties such as strain, charge density, and dielectric environment can be evaluated by Raman spectroscopy. These environmental interactions are not trivial to determine, since they affect the spectra in overlapping ways. Data preprocessing such as background subtraction and peak fitting is typically used. Moreover, collected spectroscopic data vary due to different experimental setups and environments. Such variations, artifacts, and environmental differences pose a challenge in accurate spectral analysis. In this work, we developed a deep learning model to overcome the effects of such variations and classify graphene Raman spectra according to different charge densities and dielectric environments. We consider two approaches: deep learning models and machine learning algorithms to classify spectra with slightly different charge density or dielectric environment. These two approaches show similar success rates for high Signal-to-Noise data. However, deep learning models are less sensitive to noise. To improve the accuracy and generalization of all models, we use data augmentation through additive noise and peak shifting. We demonstrated the spectra classification with 99% accuracy using a convolutional neural net (CNN) model. The CNN model is able to classify Raman spectra of graphene with different charge doping levels and even subtle variation in the spectra between graphene on SiO$_2$ and graphene on silanized SiO$_2$. Our approach has the potential for fast and reliable estimation of graphene doping levels and dielectric environments. The proposed model paves the way for achieving efficient analytical tools to evaluate the properties of graphene.

cs.LG↗

arXiv2018

Modeling and Thermal Metrology of Thermally Isolated MEMS Electrothermal Actuators for Strain Engineering of 2D Materials

We present electrothermal microelectromechanical (MEMS) actuators as a practical platform for straining 2D materials. The advantages of the electrothermal actuator is its high output force and displacement for low input voltage, but its drawback is that it is actuated by generating high amounts of heat. It is crucial to mitigate the high temperatures generated during actuation for reliable 2D material strain device implementation. Here, we implement a chevron actuator design that incorporates a thermal isolation stage in order to avoid heating the 2D material from the high temperatures generated during the actuation. By comparing experiment and simulation, we ensure our design does not compromise output displacement, while keeping the 2D material strain device stage cool. We also provide a simple analytical model useful for quickly evaluating different thermal isolation stage designs.

physics.app-ph↗

arXiv2018

Monolayer MoS$_2$ Strained to 1.3\% with a Microelectromechanical System

We report on a modified transfer technique for atomically thin materials integrated onto microelectromechanical systems (MEMS) for studying strain physics and creating strain-based devices. Our method tolerates the non-planar structures and fragility of MEMS, while still providing precise positioning and crack free transfer of flakes. Further, our method used the transfer polymer to anchor the 2D crystal to the MEMS, which reduces the fabrication time, increases the yield, and allowed us to exploit the strong mechanical coupling between 2D crystal and polymer to strain the atomically thin system. We successfully strained single atomic layers of molybdenum disulfide (MoS$_2$) with MEMS devices for the first time and achieved greater than 1.3\% strain, marking a major milestone for incorporating 2D materials with MEMS We used the established strain response of MoS$_2$ Raman and Photoluminescence spectra to deduce the strain in our crystals and provide a consistency check. We found good comparison between our experiment and literature.

cond-mat.mtrl-sci↗

arXiv2016

Band Gap Engineering with Ultralarge Biaxial Strains in Suspended Monolayer MoS2

We demonstrate the continuous and reversible tuning of the optical band gap of suspended monolayer MoS2 membranes by as much as 500 meV by applying very large biaxial strains. By using chemical vapor deposition (CVD) to grow crystals that are highly impermeable to gas, we are able to apply a pressure difference across suspended membranes to induce biaxial strains. We observe the effect of strain on the energy and intensity of the peaks in the photoluminescence (PL) spectrum, and find a linear tuning rate of the optical band gap of 99 meV/%. This method is then used to study the PL spectra of bilayer and trilayer devices under strain, and to find the shift rates and Grüneisen parameters of two Raman modes in monolayer MoS2. Finally, we use this result to show that we can apply biaxial strains as large as 5.6% across micron sized areas, and report evidence for the strain tuning of higher level optical transitions.

cond-mat.mes-hall↗

arXiv2016

Long tailed trions in monolayer MoS$_2$: Temperature dependent asymmetry and red-shift of trion photoluminescence spectra

Monolayer molybdenum disulfide (MoS$_2$) has emerged as an excellent 2D model system because of its two inequivalent, direct-gap valleys that lead to exotic bound and excited states. Here we focus on one such bound state, the negatively charged trion. Unlike excitons, trions can radiatively decay with non-zero momentum by kicking out an electron, resulting in an asymmetric trion photoluminescence (PL) peak with a long low-energy tail. As a consequence, the peak position does not correspond to the zero momentum trion energy. By including the trion's long tail in our analysis we are able to accurately separate the exciton from the trion contributions to the PL spectra. According to theory, the asymmetric energy tail has both a size-dependent and a temperature-dependent contribution. Analysis of the temperature-dependent data reveals the effective trion size, consistent with literature, and the temperature dependence of the band gap and spin-orbit splitting of the valence band. Finally, we observe signatures of Pauli-blocking of the trion decay.

cond-mat.mtrl-sci↗

arXiv2013

Charge tuning of non-resonant magneto-exciton phonon interactions in graphene

Far from resonance, the coupling of the G-band phonon to magneto-excitons in single layer graphene displays kinks and splittings versus filling factor that are well described by Pauli blocking and unblocking of inter- and intra- Landau level transitions. We explore the non-resonant electron-phonon coupling by high-magnetic field Raman scattering while electrostatic tuning of the carrier density controls the filling factor. We show qualitative and quantitative agreement between spectra and a linearized model of electron-phonon interactions in magnetic fields. The splitting is caused by dichroism of left and right handed circular polarized light due to lifting of the G-band phonon degeneracy, and the piecewise linear slopes are caused by the linear occupancy of sequential Landau levels versus $ν$.

cond-mat.mes-hall↗

arXiv2013

Lattice-corrected strain-induced vector potentials in graphene

The electronic implications of strain in graphene can be captured at low energies by means of pseudovector potentials which can give rise to pseudomagnetic fields. These strain-induced vector potentials arise from the local perturbation to the electronic hopping amplitudes in a tight-binding framework. Here we complete the standard description of the strain-induced vector potential, which accounts only for the hopping perturbation, with the explicit inclusion of the lattice deformations or, equivalently, the deformation of the Brillouin zone. These corrections are linear in strain and are different at each of the strained, inequivalent Dirac points, and hence are equally necessary to identify the precise magnitude of the vector potential. This effect can be relevant in scenarios of inhomogeneous strain profiles, where electronic motion depends on the amount of overlap among the local Fermi surfaces. In particular, it affects the pseudomagnetic field distribution induced by inhomogeneous strain configurations, and can lead to new opportunities in tailoring the optimal strain fields for certain desired functionalities.

cond-mat.mes-hall↗

arXiv2007

Scaling of exciton binding energy with external dielectric function in carbon nanotubes

We develop a scaling relationship between the exciton binding energy and the external dielectric function in carbon nanotubes. We show that the electron-electron and electron-hole interaction energies are strongly affected by screening yet largely counteract each other, resulting in much smaller changes in the optical transition energy. The model indicates that the relevant particle interaction energies are reduced by as much as 50 percent upon screening by water and that the unscreened electron-electron interaction energy is larger than the unscreened electron-hole interaction energy, in agreement with explanations of the "ratio problem." We apply the model to measurements of the changes in the optical transistion energies in single, suspended carbon nanotubes as the external dielectric environment is altered.

cond-mat.other↗

arXiv2007

Screening of Excitons in Single, Suspended Carbon Nanotubes

Resonant Raman spectroscopy of single carbon nanotubes suspended across trenches displays red shifts of up to 30 meV of the electronic transition energies as a function of the surrounding dielectric environment. We develop a simple scaling relationship between the exciton binding energy and the external dielectric function and thus quantify the effect of screening. Our results imply that the underlying particle interaction energies change by hundreds of meV.

cond-mat.other↗

arXiv2006

Intrinsic Optical Transition Energies in Carbon Nanotubes

Intrinsic optical transition energies for isolated and individual single wall carbon nanotubes grown over trenches are measured using tunable resonant Raman scattering. Previously measured E22_S optical transitions from nanotubes in surfactants are blue shifted 70-90 meV with respect to our measurements of nanotubes in air. This large shift in the exciton energy is attributed to a larger change of the exciton binding energy than the band-gap renormalization as the surrounding dielectric constant increases.

cond-mat.mtrl-sci↗

arXiv2001

Epitaxial growth of Cu on Cu(001): experiments and simulations

A quantitative comparison between experimental and Monte Carlo simulation results for the epitaxial growth of Cu/Cu(001) in the submonolayer regime is presented. The simulations take into account a complete set of hopping processes whose activation energies are derived from semi-empirical calculations using the embedded-atom method. The island separation is measured as a function of the incoming flux and the temperature. A good quantitative agreement between the experiment and simulation is found for the island separation, the activation energies for the dominant processes, and the exponents that characterize the growth. The simulation results are then analyzed at lower coverages, which are not accessible experimentally, providing good agreement with theoretical predictions as well.

cond-mat↗