arXiv subjects

Anna N. Morozovska

Publications and source records attributed to Anna N. Morozovska.

At least 181 records · Page 10Linked to original sources

arXiv2012

Ionically-mediated electromechanical hysteresis in transition metal oxides

Electromechanical activity, remanent polarization states, and hysteresis loops in paraelectric TiO2 and SrTiO3 are observed. The coupling between the ionic dynamics and incipient ferroelectricity in these materials is analyzed using extended Ginsburg Landau Devonshire (GLD) theory. The possible origins of electromechanical coupling including ionic dynamics, surface-charge induced electrostriction, and ionically-induced ferroelectricity are identified. For the latter, the ionic contribution can change the sign of first order GLD expansion coefficient, rendering material effectively ferroelectric. These studies provide possible explanation for ferroelectric-like behavior in centrosymmetric transition metal oxides.

cond-mat.mtrl-sci↗

arXiv2012

Mesoscopic mechanism of the domain wall interaction with elastic defects in ferroelectrics

The role of elastic defects on the kinetics of 180-degree uncharged ferroelectric domain wall motion is explored using continuum time-dependent LGD equation with elastic dipole coupling. In one dimensional case, ripples, steps and oscillations of the domain wall velocity appear due to the wall-defect interactions. While the defects do not affect the limiting-wall velocity vs. field dependence, they result in the minimal threshold field required to activate the wall motions. The analytical expressions for the threshold field are derived and the latter is shown to be much smaller than the thermodynamic coercive field. The threshold field is linearly proportional to the concentration of defects and non-monotonically depends on the average distance between them. The obtained results provide the insight into the mesoscopic mechanism of the domain wall pinning by elastic defects in ferroelectrics.

cond-mat.mtrl-sci↗

arXiv2011

Interfacial Polarization and Pyroelectricity in Antiferrodistortive Structures Induced by a Flexoelectric Effect and Rotostriction

Theoretical analysis based on the Landau-Ginzburg-Devonshire (LGD) theory is used to show that the product effect of flexoelectricity and rotostriction can lead to a spontaneous polarization in the vicinity of antiphase boundaries, ferroelastic twin walls, surfaces and interfaces in the octahedrally tilted phase of otherwise non-ferroelectric perovskites such as CaTiO3, SrTiO3, and EuTiO3. As an example, we numerically demonstrate a large spontaneous polarization on the order of 1-5muC/cm2 at the SrTiO3 antidistortive phase boundaries at temperatures lower than the antiferrodistortive structural phase transition temperature of ~105 K

cond-mat.mtrl-sci↗

arXiv2011

Domain wall conduction in multiaxial ferroelectrics

The conductance of domain wall structures consisting of either stripes or cylindrical domains in multi-axial ferroelectric-semiconductors is analyzed. The effects of the domain size, wall tilt and curvature, on charge accumulation, are analyzed using the Landau-Ginsburg Devonshire (LGD) theory for polarization combined with Poisson equation for charge distributions. Both the classical ferroelectric parameters including expansion coefficients in 2-4-6 Landau potential and gradient terms, as well as flexoelectric coupling, inhomogeneous elastic strains and electrostriction are included in the present analysis. Spatial distributions of the ionized donors, free electrons and holes were found self-consistently using the effective mass approximation for the respective densities of states. The proximity and size effect of the electron and donor accumulation/depletion by thin stripe domains and cylindrical nanodomains are revealed. In contrast to thick domain stripes and thicker cylindrical domains, in which the carrier accumulation (and so the static conductivity) sharply increases at the domain walls only, small nanodomains of radius less then 5-10 correlation length appeared conducting across entire cross-section. Implications of such conductive nanosized channels may be promising for nanoelectronics.

cond-mat.mtrl-sci↗

arXiv2011

Ferroelectricity and ferromagnetism in EuTiO3 nanowires

We predicted the ferroelectric-ferromagnetic multiferroic properties of EuTiO3 nanowires and generated the phase diagrams in coordinates of temperature and wire radii. The calculations were performed within the Landau-Ginzburg-Devonshire theory with phenomenological parameters extracted from tabulated experimental data and first principles calculations. Since bulk EuTiO3 is antiferromagnetic at temperatures lower than 5.5 K and paraelectric at all temperatures, our goal was to investigate the possibility of inducing the ferroelectric and ferromagnetic properties of EuTiO3 by reducing the bulk to nanosystems. Our results indicate that ferroelectric spontaneous polarization of ~0.1-0.5C/m2 is induced in EuTiO3 nanowires due to the intrinsic surface stress, which is inversely proportional to the nanowire radius. The spontaneous polarization exists at temperatures lower than 300 K, for the wire radius less than 1 nm and typical surface stress coefficients ~ 15 N/m. Due to the strong biquadratic magnetoelectric coupling, the spontaneous polarization in turn induces the ferromagnetic phase at temperatures lower than 30 K for 2 nm nanowire, and at temperatures lower than 10 K for 4 nm nanowire in EuTiO3. Thus we predicted that the EuTiO3 nanowires can be the new ferroelectric-ferromagnetic multiferroic.

cond-mat.mtrl-sci↗

arXiv2010

Impact of ferroelectric nonlinearity and correlation effects on nanodomain formation

Using direct variational method with 2-parametric trial function and Landau-Ginzburg-Devonshire thermodynamical approach, we derived analytical expressions for polarization spatial redistribution in the ferroelectrics caused by the biased Scanning Probe Microscope probe. We demonstrate that the shape of nanodomain induced by the probe electric field can be either oblate or prolate depending on the ferroelectric nonlinearity strength. For typical ferroelectric material parameters and probe apex geometry the domain nucleus aspect ratio is close to dielectric anisotropy factor. Corresponding coercive biases of a stable domain formation are in reasonable agreement with available experimental results. Spike-like domains typical for Landauer-Molotskii rigid approach appear in the considered case only when depolarization field energy contribution strongly dominates over the nonlinear correlation and field effects and domain wall energy.

cond-mat.mtrl-sci↗

arXiv2009

Appearance of ferroelectricity in BaO nanowires

We predict that ferroelectric phase can be induced by the strong intrinsic surface stress inevitably present under the curved surface in the high aspect ratio cylindrical nanoparticles of nonferroelectric binary oxides (BaO, EuO, MgO, etc). We calculated the sizes and temperature range of the ferroelectric phase in BaO nanowires. The analytical calculations were performed within Landau-Ginzburg-Devonshire theory with phenomenological parameters extracted from the first principle calculations [E. Bousquet et al, Strain-induced ferroelectricity in simple rocksalt binary oxides. arXiv:0906.4235v1] and tabulated experimental data. In accordance with our calculations BaO nanowires of radius ~(1-10) nm can be ferroelectric at room temperature (with spontaneous polarization values up to 0.5 C/m2) for the typical surface stress coefficients ~ (10-50) N/m. We hope that our prediction can stimulate both experimental studies of rocksalt binary oxides nanoparticles polar properties as well as the first principle calculations of their spontaneous dipole moment induced by the intrinsic stress under the curved surface.

cond-mat.mtrl-sci↗

arXiv2009

Phase diagrams and polar properties of ferroelectric nanotubes and nanowires

In this paper we study the size effects of the ferroelectric nanotube and nanowire phase diagrams and polar properties allowing for radial stress and depolarization field influence. The approximate analytical expression for the paraelectric-ferroelectric transition temperature dependence on the radii of nanotube, polarization gradient coefficient, extrapolation length, radial stress (surface tension) and electrostriction coefficient was derived. It was shown that the transition temperature could be higher than the one of the bulk material for negative electrostriction coefficient and small depolarization field. Therefore we predict conservation and enhancement of polar properties in long cylindrical ferroelectric nanoparticles. Obtained results explain the observed ferroelectricity conservation and enhancement in Pb(Zr,Ti)O_3 and BaTiO_3 nanowires and nanotubes. Moreover, despite made assumptions and approximations our modelling appeared in a surprisingly good agreement with observed ferroelectric and local piezoresponse hysteresis loops.

cond-mat.mtrl-sci↗

arXiv2008

Thermodynamics of nanodomain formation and breakdown in Scanning Probe Microscopy: Landau-Ginzburg-Devonshire approach

Thermodynamics of tip-induced nanodomain formation in scanning probe microscopy of ferroelectric films and crystals is studied using the Landau-Ginzburg-Devonshire phenomenological approach. The local redistribution of polarization induced by the biased probe apex is analyzed including the effects of polarization gradients, field dependence of dielectric properties, intrinsic domain wall width, and film thickness. The polarization distribution inside subcritical nucleus of the domain preceding the nucleation event is very smooth and localized below the probe, and the electrostatic field distribution is dominated by the tip. In contrast, polarization distribution inside the stable domain is rectangular-like, and the associated electrostatic fields clearly illustrate the presence of tip-induced and depolarization field components. The calculated coercive biases of domain formation are in a good agreement with available experimental results for typical ferroelectric materials. The microscopic origin of the observed domain tip elongation in the region where the probe electric field is much smaller than the intrinsic coercive field is the positive depolarization field in front of the moving counter domain wall. For infinitely thin domain walls local domain breakdown through the sample depth appears. The results obtained here are complementary to the Landauer-Molotskii energetic approach.

cond-mat.mtrl-sci↗

arXiv2008

The Interaction of an 180 degree Ferroelectric Domain Wall with a Biased Scanning Probe Microscopy Tip: Effective Wall Geometry and Thermodynamics in Ginzburg-Landau-Devonshire Theory

The interaction of ferroelectric 180 degree domain wall with a strongly inhomogeneous electric field of biased Scanning Probe Microscope tip is analyzed within continuous Landau-Ginzburg-Devonshire theory. Equilibrium shape of the initially flat domain wall boundary bends, attracts or repulses from the probe apex, depending on the sign and value of the applied bias. For large tip-wall separations, the probe-induced domain nucleation is possible. The approximate analytical expressions for the polarization distribution are derived using direct variational method. The expressions provide insight how the equilibrium polarization distribution depends on the wall finite-width, correlation and depolarization effects, electrostatic potential distribution of the probe and ferroelectric material parameters.

cond-mat.mtrl-sci↗

arXiv2008

Threshold fields for antiparallel ferroelectric domain wall motion

While an ideal antiparallel ferroelectric wall is considered a unit cell in width (~0.5nm), we show using phase field modeling that the threshold field for moving this wall dramatically drops by 2-3 orders of magnitude if the wall were diffuse by only ~2-3nm. Since antiparallel domain walls are symmetry allowed in all ferroelectrics, and since domain wall broadening on nanometer scale is widely reported in literature, this mechanism is generally applicable to all ferroelectrics.

cond-mat.mtrl-sci↗

arXiv2008

Surface Effect on Domain Wall Width in Ferroelectrics

We study the effect of depolarization field related with inhomogeneous polarization distribution, strain and surface energy parameters on a domain wall profile near the surface of a ferroelectric film within the framework of Landau-Ginzburg-Devonshire phenomenology. Both inhomogeneous elastic stress and positive surface energy lead to the wall broadening at electrically screened surface. For ferroelectrics with weak piezoelectric coupling, the extrapolation length that defines surface energy parameter, affects the wall broadening more strongly than inhomogeneous elastic stress. Unexpectedly, the domain wall profile follows a long-range power law when approaching the surface, while it saturates exponentially in the bulk. In materials with high piezoelectric coupling and negligibly small surface energy (i.e. high extrapolation length) inhomogeneous elastic stress effect dominates.

cond-mat.mtrl-sci↗

arXiv2008

Quantitative piezoelectric force microscopy: Influence of tip shape, size, and contact geometry on the nanoscale resolution of an antiparallel ferroelectric domain wall

The structure of a single antiparallel ferroelectric domain wall in LiNbO3 is quantitatively mapped by piezoelectric force microscopy (PFM) with calibrated probe geometry. The PFM measurements are performed for 49 probes with the radius varying from 10 to 300 nm. The magnitude and variation of the experimental piezoelectric coefficient across a domain wall matches the profiles calculated from a comprehensive analytical theory, as well as 3-dimensional finite element method simulations. Quantitative agreement between experimental and theoretical profile widths is obtained only when a finite disk-type tip radius that is in true contact with the sample surface is considered, which is in agreement with scanning electron microscopy images of the actual tips after imaging. The magnitude of the piezoelectric coefficient is shown to be independent of the tip radius, and the PFM profile width is linearly proportional to the tip radius. Finally we demonstrate a method to extract any intrinsic material broadening of the ferroelectric wall width. Surprisingly wide wall widths of 20- 200nm are observed.

cond-mat.mtrl-sci↗

arXiv2008

Effect of the Intrinsic Width on the Piezoelectric Force Microscopy of a Single Ferroelectric Domain Wall

Intrinsic domain wall width is a fundamental parameter that reflects bulk ferroelectric properties and governs the performance of ferroelectric memory devices. We present closed-form analytical expressions for vertical and lateral piezoelectric force microscopy (PFM) profiles for the conical and disc models of the tip, beyond point charge and sphere approximations. The analysis takes into account the finite intrinsic width of the domain wall, and dielectric anisotropy of the material. These analytical expressions provide insight into the mechanisms of PFM image formation and can be used for quantitative analysis of the PFM domain wall profiles. PFM profile of a realistic domain wall is shown to be the convolution of its intrinsic profile and resolution function of PFM.

cond-mat.mtrl-sci↗

arXiv2007

Local Polarization Switching in the Presence of Surface Charged Defects: Microscopic Mechanisms and Piezoresponse Force Spectroscopy Observations

The thermodynamics and kinetics of tip-induced polarization switching in Piezoresponse Force Microscopy in the presence of surface charge defects is studied using the combination of analytical and numerical techniques. The signature of the defects in hysteresis loop fine structure and Switching Spectroscopy PFM images is identified and compared to experimental observations. An approach for the deconvolution of PFM spectroscopy measurements to extract relevant defect parameters is derived. This methodology is universal and can be extended to switching in other ferroics and in reversible electrochemical processes, establishing a pathway for the understanding of the thermodynamics and kinetics of phase transitions at a single defect level.

cond-mat.mtrl-sci↗

arXiv2007

Resistively shunted Josephson junctions: QFT predictions versus MC results

During the last fourteen years several exact results were obtained for the so-called boundary sine-Gordon model. In the case of a conformal bulk this 2D boundary quantum field theory describes the universal scaling behavior of the Caldeira-Leggett model of resistively shunted Josephson junctions. In this work, we use a recently developed Monte Carlo technique to test some of the analytical predictions.

cond-mat.other↗

arXiv2007

The Piezoresponse Force Microscopy of surface layers and thin films: effective response and resolution function

Signal formation mechanism of Piezoresponse Force Microscopy of piezoelectric surface layers and thin films on stiff and elastically matched substrates is analyzed and thickness dependence of effective piezoelectric response, object transfer function components and Rayleigh two-point resolution are derived. Obtained exact series and simple Pade approximations can be applied for the effective piezoresponse analytical calculations in the case of films capped on different substrates. The effective piezoresponse is thickness dependent for piezoelectric films on substrates with low dielectric permittivity (extrinsic size effect), whereas the thickness dependence is essentially suppressed for giant permittivity or metallic substrates. Thus implications of analysis for ferroelectric data storage and device applications are discussed.

cond-mat.mtrl-sci↗

arXiv2007

Extrinsic Size Effect in Piezoresponse Force Microscopy of Thin Films

The extrinsic size effect in Piezoresponse Force Microscopy of ferroelectric and piezoelectric thin films on non-polar dielectric substrate is analyzed. Analytical expressions for effective piezoresponse, object transfer function components, and Rayleigh two-point resolution are obtained. These results can be broadly applied for effective piezoelectric response calculations in thin piezoelectric and ferroelectric films as well as surface polar layers e.g. in organic materials and bio-polymers. In particular, the effective piezoresponse strongly decreases with film thickness whereas the sharpness of domain stripes image increases due to the object transfer function spectrum broadening.

cond-mat.mtrl-sci↗