arXiv subjects

Arnaud Carignan-Dugas

Publications and source records attributed to Arnaud Carignan-Dugas.

17 recordsLinked to original sources

arXiv2026

Gate Synthesis in Dephasing-Limited Nitrogen-Vacancy Ensembles

Ensemble nitrogen-vacancy (NV) centers are widely used for quantum sensing and magnetometry, where performance depends on the accurate implementation of microwave pulse sequences. In these systems, inhomogeneous broadening and short coherence times limit reliable multi-pulse control, while hardware imperfections and off-resonant excitation distort implemented rotations, making direct calibration of arbitrary gates tedious. To address this, we implement a control framework with a ZXZXZ gate decomposition which uses fixed-angle, phase-parameterized pulses, enabling universal single-qubit control from a single calibrated $ π/2$ primitive ($X_{π/2}$) along with virtual Z operations. We compare a standard pulse with a composite pulse designed for high-power operation in a regime where the Rabi frequency is comparable to the hyperfine splitting, leading to non-uniform evolution across hyperfine levels. Using pre-determined combinations of $π/2$ pulse sequences, we observe that standard pulses rapidly deviate from ideal behavior under repeated application, while the composite pulse suppresses this error accumulation by more than 70$\%$ for longer sequences despite its longer duration. In contrast, randomized benchmarking yields similar decay factors for both implementations, highlighting its limited sensitivity to coherent control errors. These results establish a practical route to robust control in short-coherence ensemble systems and emphasize the importance of pulse-level characterization.

quant-ph↗

arXiv2026

Digital Predistortion for Flux Control of Tunable Superconducting Qubits

Flux-tunable superconducting qubits rely on fast flux control pulses to implement two-qubit entangling quantum gates, a key building block for quantum algorithms. However, distortion effects introduced by non-ideal control electronics, parasitic components, and the cryogenic quantum chip response can all degrade the gate fidelity. We present a digital predistortion (DPD) framework for characterizing and then compensating for these distortions using a combination of infinite impulse response (IIR) and finite impulse response (FIR) filters. Experiments on a flux-tunable quantum processing unit (QPU) demonstrate a successful correction of step-response distortions on the flux-control line, with a compensated control signal showing only sub-percent deviations from the ideal target linear behavior. The demonstrated method enables automated rapid calibration of flux control channels for superconducting QPUs.

quant-ph↗

arXiv2025

Easier randomizing gates provide more accurate fidelity estimation

Accurate benchmarking of quantum gates is crucial for understanding and enhancing the performance of quantum hardware. A standard method for this is interleaved benchmarking, a technique which estimates the error on an interleaved target gate by comparing cumulative error rates of randomized sequences implemented with the interleaved gate and without it. In this work, we show both numerically and experimentally that the standard approach of interleaved randomized benchmarking (IRB), which uses the multi-qubit Clifford group for randomization, can produce highly inaccurate and even physically impossible estimates for the error on the interleaved gate in the presence of coherent errors. Fortunately we also show that interleaved benchmarking performed with cycle benchmarking, which randomizes with single qubit Pauli gates, provides dramatically reduced systematic uncertainty relative to standard IRB, and further provides as host of additional benefits including data reusability. We support our conclusions with a theoretical framework for bounding systematic errors, extensive numerical results comparing a range of interleaved protocols under fixed resource costs, and experimental demonstrations on three quantum computing platforms.

quant-ph↗

arXiv2025

A Theory of Direct Randomized Benchmarking

Randomized benchmarking (RB) protocols are widely used to measure an average error rate for a set of quantum logic gates. However, the standard version of RB is limited because it only benchmarks a processor's native gates indirectly, by using them in composite $n$-qubit Clifford gates. Standard RB's reliance on $n$-qubit Clifford gates restricts it to the few-qubit regime, because the fidelity of a typical composite $n$-qubit Clifford gate decreases rapidly with increasing $n$. Furthermore, although standard RB is often used to infer the error rate of native gates, by rescaling standard RB's error per Clifford to an error per native gate, this is an unreliable extrapolation. Direct RB is a method that addresses these limitations of standard RB, by directly benchmarking a customizable gate set, such as a processor's native gates. Here we provide a detailed introduction to direct RB, we discuss how to design direct RB experiments, and we present two complementary theories for direct RB. The first of these theories uses the concept of error propagation or scrambling in random circuits to show that direct RB is reliable for gates that experience stochastic Pauli errors. We prove that the direct RB decay is a single exponential, and that the decay rate is equal to the average infidelity of the benchmarked gates, under broad circumstances. This theory shows that group twirling is not required for reliable RB. Our second theory proves that direct RB is reliable for gates that experience general gate-dependent Markovian errors, using similar techniques to contemporary theories for standard RB. Our two theories for direct RB have complementary regimes of applicability, and they provide complementary perspectives on why direct RB works. Together these theories provide comprehensive guarantees on the reliability of direct RB.

quant-ph↗

arXiv2025

Characterizing Universal Gate Sets via Dihedral Benchmarking

We describe a practical experimental protocol for robustly characterizing the error rates of non-Clifford gates associated with dihedral groups, including gates in SU(2) associated with arbitrarily small angle rotations. Our dihedral benchmarking protocol is a generalization of randomized benchmarking that relaxes the usual unitary 2-design condition. Combining this protocol with existing randomized benchmarking schemes enables an efficient means of characterizing universal gate sets for quantum information processing in a way that is independent of state-preparation and measurement errors. In particular, our protocol enables direct benchmarking of the $T$ gate (sometime called $π/8$-gate) even for the gate-dependent error model that is expected in leading approaches to fault-tolerant quantum computation.

quant-ph↗

arXiv2025

Quasi-Probabilistic Readout Correction of Mid-Circuit Measurements for Adaptive Feedback via Measurement Randomized Compiling

Quantum measurements are a fundamental component of quantum computing. However, on modern-day quantum computers, measurements can be more error prone than quantum gates, and are susceptible to non-unital errors as well as non-local correlations due to measurement crosstalk. While readout errors can be mitigated in post-processing, it is inefficient in the number of qubits due to a combinatorially-large number of possible states that need to be characterized. In this work, we show that measurement errors can be tailored into a simple stochastic error model using randomized compiling, enabling the efficient mitigation of readout errors via quasi-probability distributions reconstructed from the measurement of a single preparation state in an exponentially large confusion matrix. We demonstrate the scalability and power of this approach by correcting readout errors without matrix inversion on a large number of different preparation states applied to a register of eight superconducting transmon qubits. Moreover, we show that this method can be extended to mid-circuit measurements used for active feedback via quasi-probabilistic error cancellation, and demonstrate the correction of measurement errors on an ancilla qubit used to detect and actively correct bit-flip errors on an entangled memory qubit. Our approach enables the correction of readout errors on large numbers of qubits, and offers a strategy for correcting readout errors in adaptive circuits in which the results of mid-circuit measurements are used to perform conditional operations on non-local qubits in real time.

quant-ph↗

arXiv2024

Efficiently improving the performance of noisy quantum computers

Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named "Noiseless Output Extrapolation" and "Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to $86\%$ improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.

quant-ph↗

arXiv2024

Estimating Coherent Contributions to the Error Profile Using Cycle Error Reconstruction

Mitigation and calibration schemes are central to maximize the computational reach of today's Noisy Intermediate Scale Quantum (NISQ) hardware, but these schemes are often specialized to exclusively address either coherent or decoherent error sources. Quantifying the two types of errors hence constitutes a desirable feature when it comes to benchmarking error suppression tools. In this paper, we present a scalable and cycle-centric methodology for obtaining a detailed estimate of the coherent contribution to the error profile of a hard computing cycle. The protocol that we suggest is based on Cycle Error Reconstruction (CER), also known as K-body Noise Reconstruction (KNR). This protocol is similar to Cycle Benchmarking (CB) in that it provides a cycle-centric diagnostic based on Pauli fidelity estimation [1]. We introduce an additional hyper-parameter in CER by allowing the hard cycles to be folded multiple times before being subject to Pauli twirling. Performing CER for different values of our added hyper-parameter allows estimating the coherent error contributions through a generalization of the fidelity decay formula. We confirm the accuracy of our method through numerical simulations on a quantum simulator, and perform proof-of-concept experiments on three IBM chips, namely ibmq_guadalupe, ibmq_manila, and ibmq_montreal. In all three experiments, we measure substantial coherent errors biased in Z.

quant-ph↗

arXiv2023

Applying NOX Error Mitigation Protocols to Calculate Real-time Quantum Field Theory Scattering Phase Shifts

Real-time scattering calculations on a Noisy Intermediate Scale Quantum (NISQ) quantum computer are disrupted by errors that accumulate throughout the circuits. To improve the accuracy of such physics simulations, one can supplement the application circuits with a recent error mitigation strategy known as Noisy Output eXtrapolation (NOX). We tested these error mitigation protocols on a Transverse Field Ising model and improved upon previous calculations of the phase shift. Our proof-of-concept 4-qubit application circuits were run on several IBM quantum computing hardware architectures. Metrics were introduced that show between 21\% and 74\% error reduction for circuit depths ranging from 14 to 37 hard cycles, confirming that the NOX technique applies to circuits with a broad range of failure rates. This observation on different cloud-accessible devices further confirms that NOX provides performance improvements even in the advent where circuits are executed in substantially time-separated batches. Finally, we provide a heuristic method to obtain systematic error bars on the mitigated results, compare them with empirical errors and discuss their effects on phase shift estimates.

quant-ph↗

arXiv2023

Extending the Computational Reach of a Superconducting Qutrit Processor

Quantum computing with qudits is an emerging approach that exploits a larger, more-connected computational space, providing advantages for many applications, including quantum simulation and quantum error correction. Nonetheless, qudits are typically afflicted by more complex errors and suffer greater noise sensitivity which renders their scaling difficult. In this work, we introduce techniques to tailor and mitigate arbitrary Markovian noise in qudit circuits. We experimentally demonstrate these methods on a superconducting transmon qutrit processor, and benchmark their effectiveness for multipartite qutrit entanglement and random circuit sampling, obtaining up to 3x improvement in our results. To the best of our knowledge, this constitutes the first ever error mitigation experiment performed on qutrits. Our work shows that despite the intrinsic complexity of manipulating higher-dimensional quantum systems, noise tailoring and error mitigation can significantly extend the computational reach of today's qudit processors.

quant-ph↗

arXiv2023

The Error Reconstruction and Compiled Calibration of Quantum Computing Cycles

Quantum computers are inhibited by physical errors that occur during computation. For this reason, the development of increasingly sophisticated error characterization and error suppression techniques is central to the progress of quantum computing. Error distributions are considerably influenced by the precise gate scheduling across the entire quantum processing unit. To account for this holistic feature, we may ascribe each error profile to a (clock) cycle, which is a scheduled list of instructions over an arbitrarily large fraction of the chip. A celebrated technique known as randomized compiling introduces some randomness within cycles' instructions, which yields effective cycles with simpler, stochastic error profiles. In the present work, we leverage the structure of cycle benchmarking (CB) circuits as well as known Pauli channel estimation techniques to derive a method, which we refer to as cycle error reconstruction (CER), to estimate with multiplicative precision the marginal error distribution associated with any effective cycle of interest. The CER protocol is designed to scale for an arbitrarily large number of qubits. Furthermore, we develop a fast compilation-based calibration method, referred to as stochastic calibration (SC), to identify and suppress local coherent error sources occurring in any effective cycle of interest. We performed both protocols on IBM-Q 5-qubit devices. Via our calibration scheme, we obtained up to a 5-fold improvement of the circuit performance.

quant-ph↗

arXiv2019

Bounding the average gate fidelity of composite channels using the unitarity

There is currently a significant need for robust and efficient methods for characterizing quantum devices. While there has been significant progress in this direction, there remains a crucial need to precisely determine the strength and type of errors on individual gate operations, in order to assess and improve control as well as reliably bound the total error in a quantum circuit given some partial information about the errors on the components. In this work, we first provide an optimal bound on the total fidelity of a circuit in terms of component fidelities, which can be efficiently experimentally estimated via randomized benchmarking. We then derive a tighter bound that applies under additional information about the coherence of the error, namely, the unitarity, which can also be efficiently estimated via a related experimental protocol. This improved bound smoothly interpolates between the worst-case quadratic and best-case linear scalings for composite error channels. As an application we show how our analysis substantially improves the achievable precision on estimates of the error rates of individual gates under interleaved randomized benchmarking, enabling greater precision for current experimental methods to assess and tune-up control over quantum gate operations.

quant-ph↗

arXiv2019

A polar decomposition for quantum channels (with applications to bounding error propagation in quantum circuits)

Inevitably, assessing the overall performance of a quantum computer must rely on characterizing some of its elementary constituents and, from this information, formulate a broader statement concerning more complex constructions thereof. However, given the vastitude of possible quantum errors as well as their coherent nature, accurately inferring the quality of composite operations is generally difficult. To navigate through this jumble, we introduce a non-physical simplification of quantum maps that we refer to as the leading Kraus (LK) approximation. The uncluttered parameterization of LK approximated maps naturally suggests the introduction of a unitary-decoherent polar factorization for quantum channels in any dimension. We then leverage this structural dichotomy to bound the evolution -- as circuits grow in depth -- of two of the most experimentally relevant figures of merit, namely the average process fidelity and the unitarity. We demonstrate that the leeway in the behavior of the process fidelity is essentially taken into account by physical unitary operations.

quant-ph↗

arXiv2019

Direct randomized benchmarking for multi-qubit devices

Benchmarking methods that can be adapted to multi-qubit systems are essential for assessing the overall or "holistic" performance of nascent quantum processors. The current industry standard is Clifford randomized benchmarking (RB), which measures a single error rate that quantifies overall performance. But scaling Clifford RB to many qubits is surprisingly hard. It has only been performed on 1, 2, and 3 qubits as of this writing. This reflects a fundamental inefficiency in Clifford RB: the $n$-qubit Clifford gates at its core have to be compiled into large circuits over the 1- and 2-qubit gates native to a device. As $n$ grows, the quality of these Clifford gates quickly degrades, making Clifford RB impractical at relatively low $n$. In this Letter, we propose a direct RB protocol that mostly avoids compiling. Instead, it uses random circuits over the native gates in a device, seeded by an initial layer of Clifford-like randomization. We demonstrate this protocol experimentally on 2 -- 5 qubits, using the publicly available IBMQX5. We believe this to be the greatest number of qubits holistically benchmarked, and this was achieved on a freely available device without any special tuning up. Our protocol retains the simplicity and convenient properties of Clifford RB: it estimates an error rate from an exponential decay. But it can be extended to processors with more qubits -- we present simulations on 10+ qubits -- and it reports a more directly informative and flexible error rate than the one reported by Clifford RB. We show how to use this flexibility to measure separate error rates for distinct sets of gates, which includes tasks such as measuring an average CNOT error rate.

quant-ph↗

arXiv2018

Randomized Benchmarking under Different Gatesets

We provide a comprehensive analysis of the differences between two important standards for randomized benchmarking (RB): the Clifford-group RB protocol proposed originally in Emerson et al (2005) and Dankert et al (2006), and a variant of that RB protocol proposed later by the NIST group in Knill et al, PRA (2008). While these two protocols are frequently conflated or presumed equivalent, we prove that they produce distinct exponential fidelity decays leading to differences of up to a factor of 3 in the estimated error rates under experimentally realistic conditions. These differences arise because the NIST RB protocol does not satisfy the unitary two-design condition for the twirl in the Clifford-group protocol and thus the decay rate depends on non-invariant features of the error model. Our analysis provides an important first step towards developing definitive standards for benchmarking quantum gates and a more rigorous theoretical underpinning for the NIST protocol and other RB protocols lacking a group-structure. We conclude by discussing the potential impact of these differences for estimating fault-tolerant overheads.

quant-ph↗

arXiv2018

From randomized benchmarking experiments to gateset circuit fidelity: how to interpret randomized benchmarking decay parameters

Randomized benchmarking (RB) protocols have become an essential tool for providing a meaningful partial characterization of experimental quantum operations. While the RB decay rate is known to enable estimates of the average fidelity of those operations under gate-independent Markovian noise, under gate-dependent noise this rate is more difficult to interpret rigorously. In this paper, we prove that single-qubit RB decay parameter $p$ coincides with the decay parameter of the gate-set circuit fidelity, a novel figure of merit which characterizes the expected average fidelity over arbitrary circuits of operations from the gate-set. We also prove that, in the limit of high-fidelity single-qubit experiments, the possible alarming disconnect between the average gate fidelity and RB experimental results is simply explained by a basis mismatch between the gates and the state-preparation and measurement procedures, that is, to a unitary degree of freedom in labeling the Pauli matrices. Based on numerical evidence and physically motivated arguments, we conjecture that these results also hold for higher dimensions.

quant-ph↗

arXiv2015

A coupled 2$\times$2D Babcock-Leighton solar dynamo model. I. Surface magnetic flux evolution

The need for reliable predictions of the solar activity cycle motivates the development of dynamo models incorporating a representation of surface processes sufficiently detailed to allow assimilation of magnetographic data. In this series of papers we present one such dynamo model, and document its behavior and properties. This first paper focuses on one of the model's key components, namely surface magnetic flux evolution. Using a genetic algorithm, we obtain best-fit parameters of the transport model by least-squares minimization of the differences between the associated synthetic synoptic magnetogram and real magnetographic data for activity cycle 21. Our fitting procedure also returns Monte Carlo-like error estimates. We show that the range of acceptable surface meridional flow profiles is in good agreement with Doppler measurements, even though the latter are not used in the fitting process. Using a synthetic database of bipolar magnetic region (BMR) emergences reproducing the statistical properties of observed emergences, we also ascertain the sensitivity of global cycle properties, such as the strength of the dipole moment and timing of polarity reversal, to distinct realizations of BMR emergence, and on this basis argue that this stochasticity represents a primary source of uncertainty for predicting solar cycle characteristics.

astro-ph.SR↗