arXiv subjects

Asmaa Abdallah

Publications and source records attributed to Asmaa Abdallah.

At least 19 recordsLinked to original sources

arXiv2026

Cram\'er-Rao Bound Analysis for Cell-Free ISAC Systems with Fluid Intelligent Metasurfaces

Fluid intelligent metasurface (FIM) is an emerging antenna architecture that continuously reshapes its physical geometry to optimize wireless performance. While existing studies on FIM-aided integrated sensing and communication (ISAC) rely on co-located single-base-station (BS) deployments, they fundamentally underutilize FIM's morphological flexibility due to restricted observation angles. In this paper, we investigate a FIM-augmented cell-free ISAC architecture, where distributed access points (APs) collaboratively observe a target from diverse angles. We derive the complete Fisher information matrix for target angle estimation and obtain a closed-form localization CRB that explicitly quantifies the angular diversity gain. By analyzing the block structure of the Fisher information matrix, we uncover three cell-free-specific phenomena: (i) cross-AP information coupling, (ii) multiplicative Tx--Rx FIM coupling, and (iii) angular diversity amplification. Under a 28\,GHz configuration with four APs and eight FIM elements per AP, our analysis shows that distributed angular diversity amplifies the FIM morphing gain to 15.8\,dB, compared to only 0.4\,dB in a single-AP pair deployment with the same total antenna count. We further propose an alternating optimization algorithm for joint beamforming and FIM shape design via semidefinite relaxation whose tightness is formally proved. Numerical results confirm that the proposed cell-free FIM-ISAC architecture achieves a 4.5\,dB localization CRB reduction over the single-AP fixed-array baseline at 10\,dB sensing SNR while maintaining communication quality-of-service constraints across the entire Pareto frontier.

cs.IT↗

arXiv2026

WALoMA: A Multitask Wireless Foundation Model via Adaptive Low-Rank Masked Autoencoders

This paper proposes a multitask wireless foundation model via adaptive low-rank masked autoencoders (WALoMA), a unified multi-task foundation model for sixth-generation (6G) wireless physical layer architectures, to address the limitations of specialized, task-specific deep learning models and the practical challenge of scarce labeled wireless datasets. By leveraging concepts inspired by foundation models, the proposed framework adopts a masked autoencoder (MAE) paradigm to learn from unlabeled channel data, to significantly reduce reliance on extensive annotations. The model treats wireless channel state information (CSI) as a universal modality and learns transferable representations through self-supervised channel reconstruction. Key architectural novelties include the use of 2D positional encoding (PE) to explicitly preserve the spatial-frequency relationships between antennas and subcarriers, and low-rank adaptation (LoRA) for parameter-efficient fine-tuning. The framework's efficacy is demonstrated across five downstream tasks, achieving individual scores of 96.47\% for LoS/NLoS classification, 80.45\% for beam prediction, 85.78\% for channel interpolation, 99.12\% for channel estimation, and 77.18\% for channel charting. Consequently, numerical results show that the proposed model achieves a composite score of 87.80\%, significantly outperforming the 59.90\% achieved by the large wireless model (LWM) baseline while training an average of only 14.68\% of total parameters, and maintaining strong performance even under extremely limited labeled data conditions.

cs.NI↗

arXiv2026

Enwar 3.0: An Agentic Multi-Modal LLM Orchestrator for Situation-Aware Beamforming, Blockage Prediction, and Handover Management

Maintaining robust millimeter-wave (mmWave) connectivity in vehicular networks requires real-time adaptation to environmental dynamics, sensor degradation, and link variability. This paper presents Enwar 3.0, an environment-aware reasoning framework that unifies multi-modal sensing, agentic large language models (LLMs), and context-driven model selection for predictive beamforming, blockage detection, and handover management. Building upon prior iterations of Enwar, the proposed architecture integrates a classifier-driven assessment of sensor health with a primed LLM that orchestrates multiple specialized agents through structured, task-aware prompting. A novel synthetic degradation pipeline enables the training of a sensor degradation classifier that detects real-time impairments across camera, radar, LiDAR, and GPS inputs, achieving over 99% accuracy. The LLM, trained via chain-of-thought (CoT) priming and human-in-the-loop feedback, coordinates agent calls for beam selection, blockage forecasting, and environment perception while dynamically loading sensor-specific models based on environmental context. Extensive evaluations across 15 sensor combinations demonstrate that Enwar 3.0 delivers state-of-the-art performance in both predictive accuracy and interpretability, with beam selection accuracy exceeding 88%, blockage F1-scores surpassing 98%, and reasoning correctness reaching 87% on complex decision prompts. This work establishes a scalable foundation for LLM-integrated wireless systems that reason, perceive, and adapt in real-time.

cs.MA↗

arXiv2026

Boosting Spectral Efficiency via Spatial Path Index Modulation in RIS-Aided mMIMO

Next generation wireless networks focus on improving spectral efficiency (SE) while reducing power consumption and hardware cost. Reconfigurable intelligent surfaces (RISs) offer a viable solution to meet these requirements. In order to enhance the SE, index modulation (IM) has been regarded as one of the enabling technologies via the transmission of additional information bits over the transmission media such as subcarriers, antennas and spatial paths. In this work, we explore the usage of spatial paths and introduce spatial path IM (SPIM) for RIS-aided massive multiple-input multiple-output (mMIMO) systems. Thus, the proposed framework improves the network efficiency and the coverage with the use of RIS while SPIM provides SE improvement. In order to perform SPIM, we exploit the spatial diversity of the millimeter wave channel and assign the index bits to the spatial patterns of the channel between the base station and the users through RIS. We introduce a low complexity approach for the design of hybrid beamformers, which are constructed by the steering vectors corresponding to the selected spatial path indices for SPIM-mMIMO. Furthermore, we conduct a theoretical analysis on the SE of the proposed SPIM approach, and derive the SE relationship between the SPIM-based hybrid beamforming and fully digital (FD) beamforming. Via numerical simulations, we validate our theoretical results and show that the proposed SPIM approach presents an improved SE performance, even higher than that of the use of FD beamformers while using a few RF chains.

cs.IT↗

arXiv2026

Array Geometry-Centric Axial Sidelobe Interference Analysis for Near-Field Multi-User MIMO

With the deployment of large antenna arrays at high-frequency bands, future wireless communication systems are likely to operate in the radiative near-field (NF). Unlike far-field beam steering, NF beams can be focused on a spatial region with finite depth, enabling user multiplexing in both range and angle. In NF multiuser multiple-input multiple-output (MU-MIMO) systems, achievable rates are limited by interference arising from sidelobes in both the axial (range) and lateral (angle) dimensions. This work investigates how axial sidelobes (ASLs) vary with array geometry. Closed-form array gain expressions are derived to characterize ASLs for uniform planar arrays. Analytical results show that the uniform square array (USA) yields the lowest ASLs, followed by the uniform concentric circular array (UCCA), uniform linear array (ULA), and uniform circular array (UCA). Specifically, the USA achieves a peak sidelobe level (PSLL) of -17.6 dB versus -7.9 dB for the UCA. Numerical simulations confirm that the USA provides superior sidelobe suppression and highest sumrate performance.

eess.SP↗

arXiv2026

Analyzing URA Geometry for Enhanced Near-Field Beamfocusing and Spatial Degrees of Freedom

With the deployment of large antenna arrays at high-frequency bands, future wireless communication systems are likely to operate in the radiative near-field. Unlike far-field beam steering, near-field beams can be focused on a spatial region with a finite depth, enabling spatial multiplexing in the range dimension. Moreover, in the line-of-sight MIMO near-field, multiple spatial degrees of freedom (DoF) are accessible, akin to a scattering- rich environment. In this paper, we derive the beamdepth for a generalized uniform rectangular array (URA) and investigate how the array geometry influences near-field beamdepth and its limits. We define the effective beamfocusing Rayleigh distance (EBRD), to present a near-field boundary with respect to beamfocusing and spatial multiplexing gains for the generalized URA. Our results demonstrate that under a fixed element count constraint, the array geometry has a strong impact on beamdepth, whereas this effect diminishes under a fixed aperture length constraint. Moreover, compared to uniform square arrays, elongated configurations such as uniform linear arrays (ULAs) yield narrower beamdepth and extend the effective near-field region defined by the EBRD. Building on these insights, we design a polar codebook for compressed-sensing-based channel estimation that leverages our findings. Simulation results show that the proposed polar codebook achieves a 2 dB NMSE improvement over state-of-the-art methods. Additionally, we present an analytical expression to quantify the effective spatial DoF in the near-field, revealing that they are also constrained by the EBRD. Notably, the maximum spatial DoF is achieved with a ULA configuration, outperforming a square URA in this regard.

eess.SP↗

arXiv2026

Spatial Degrees of Freedom in Near Field MIMO: Experimental Validation of Beamspace Perspective

Conventional far-field multiple-input multiple-output (MIMO) channels are limited to a single spatial degree of freedom (DoF) under a line-of-sight (LoS) condition. In contrast, the radiative near field (NF) supports multiple spatial DoF, enabled by spherical wavefronts and the reduced spatial footprint at short ranges. While recent research indicates that the effective DoF (EDoF) increases in NF, experimental validation and clear identification of the transition distances remain limited. In this letter, we develop an intuitive framework for characterizing the EDoF of a ULA-based MIMO system and derive two complementary analytical expressions: a closed-form formulation that relates the EDoF to the physical transmit beamwidth and receive aperture, and a discrete formulation based on the discrete Fourier transform (DFT) domain angular decomposition of the NF spherical wavefront, which is well suited for experimental evaluation. We further introduce the effective MIMO Rayleigh distance (EMRD) and the maximum spatial multiplexing distance (MSMD), which mark the distances where the EDoF reduces to one and attains its maximum, respectively. Experimental measurements using widely spaced phased arrays closely match the theoretical EDoF trends and validate the proposed distance metrics.

eess.SP↗

arXiv2026

Sparse Array Design for Near-Field MU-MIMO: Reconfigurable Array Thinning Approach

Future wireless networks, deploying thousands of antenna elements, may operate in the radiative near-field (NF), enabling spatial multiplexing across both angle and range domains. Sparse arrays have the potential to achieve comparable performance with fewer antenna elements. However, fixed sparse array designs are generally suboptimal under dynamic user distributions, while movable antenna architectures rely on mechanically reconfigurable elements, introducing latency and increased hardware complexity. To address these limitations, we propose a reconfigurable array thinning approach that selectively activates a subset of antennas to form a flexible sparse array design without physical repositioning. We first analyze grating lobes for uniform sparse arrays in the angle and range domains, showing their absence along the range dimension. Based on the analysis, we develop two particle swarm optimization-based strategies: a grating-lobe-based thinned array (GTA) for grating-lobe suppression and a sum-rate-based thinned array (STA) for multiuser sum-rate maximization. Simulation results demonstrate that GTA outperforms conventional uniform sparse arrays, while STA achieves performance comparable to movable antennas, thereby offering a practical and efficient array deployment strategy without the associated mechanical complexity.

eess.SP↗

arXiv2025

Near Field Tapering with Slepian Window: Balancing the Range Angle Sidelobe Trade off

Near-field beamforming enables target discrimination in both range (axial) and angle (lateral) dimensions. Elevated sidelobes along either dimension, however, increase susceptibility to interference and degrade detection performance. Conventional amplitude tapering techniques, designed for far-field scenarios, cannot simultaneously suppress axial and lateral sidelobes in near-field. In this letter, we propose a Slepian-based amplitude tapering approach that maximizes mainlobe energy concentration, achieving significant sidelobe reduction in both dimensions. Numerical results show that the proposed taper improves peak sidelobe suppression by approximately 24 dB in the lateral domain and 10 dB in the axial domain compared to a conventional uniform window.

eess.SP↗

arXiv2025

Uniform Circular Arrays in Near-Field: Omnidirectional Coverage with Limited Capacity

Recent studies suggest that uniform circular arrays (UCAs) can extend the angular coverage of the radiative near field region. This work investigates whether such enhanced angular coverage translates into improved spatial multiplexing performance when compared to uniform linear arrays (ULAs). To more accurately delineate the effective near field region, we introduce the effective beamfocusing Rayleigh distance (EBRD), an angle dependent metric that bounds the spatial region where beamfocusing remains effective. Closed form expressions for both beamdepth and EBRD are derived for UCAs. Our analysis shows that, under a fixed antenna element count, ULAs achieve narrower beamdepth and a longer EBRD than UCAs. Conversely, under a fixed aperture length, UCAs provide slightly narrower beamdepth and a marginally longer EBRD. Simulation results further confirm that ULAs achieve higher sum rate under the fixed element constraint, while UCAs offer marginal performance gain under the fixed aperture constraint.

eess.SP↗

arXiv2025

Causal Beam Selection for Reliable Initial Access in AI-driven Beam Management

Efficient and reliable beam alignment is a critical requirement for mmWave multiple-input multiple-output (MIMO) systems, especially in 6G and beyond, where communication must be fast, adaptive, and resilient to real-world uncertainties. Existing deep learning (DL)-based beam alignment methods often neglect the underlying causal relationships between inputs and outputs, leading to limited interpretability, poor generalization, and unnecessary beam sweeping overhead. In this work, we propose a causally-aware DL framework that integrates causal discovery into beam management pipeline. Particularly, we propose a novel two-stage causal beam selection algorithm to identify a minimal set of relevant inputs for beam prediction. First, causal discovery learns a Bayesian graph capturing dependencies between received power inputs and the optimal beam. Then, this graph guides causal feature selection for the DL-based classifier. Simulation results reveal that the proposed causal beam selection matches the performance of conventional methods while drastically reducing input selection time by 94.4% and beam sweeping overhead by 59.4% by focusing only on causally relevant features.

cs.AI↗

arXiv2025

Multi-Modal Sensor Fusion for Proactive Blockage Prediction in mmWave Vehicular Networks

Vehicular communication systems operating in the millimeter wave (mmWave) band are highly susceptible to signal blockage from dynamic obstacles such as vehicles, pedestrians, and infrastructure. To address this challenge, we propose a proactive blockage prediction framework that utilizes multi-modal sensing, including camera, GPS, LiDAR, and radar inputs in an infrastructure-to-vehicle (I2V) setting. This approach uses modality-specific deep learning models to process each sensor stream independently and fuses their outputs using a softmax-weighted ensemble strategy based on validation performance. Our evaluations, for up to 1.5s in advance, show that the camera-only model achieves the best standalone trade-off with an F1-score of 97.1% and an inference time of 89.8ms. A camera+radar configuration further improves accuracy to 97.2% F1 at 95.7ms. Our results display the effectiveness and efficiency of multi-modal sensing for mmWave blockage prediction and provide a pathway for proactive wireless communication in dynamic environments.

cs.LG↗

arXiv2025

Joint Motion, Angle, and Range Estimation in Near-Field under Array Calibration Imperfections

Ultra-massive multiple-input multiple-output MIMO (UM-MIMO) leverages large antenna arrays at high frequencies, transitioning communication paradigm into the radiative near-field (NF), where spherical wavefronts enable full-vector estimation of both target location and velocity. However, location and motion parameters become inherently coupled in this regime, making their joint estimation computationally demanding. To overcome this, we propose a novel approach that projects the received two-dimensional space-time signal onto the angle-Doppler domain using a two-dimensional discrete Fourier transform (2D-DFT). Our analysis reveals that the resulting angular spread is centered at the target's true angle, with its width determined by the target's range. Similarly, transverse motion induces a Doppler spread centered at the true radial velocity, with the width of Doppler spread proportional to the transverse velocity. Exploiting these spectral characteristics, we develop a low-complexity algorithm that provides coarse estimates of angle, range, and velocity, which are subsequently refined using one-dimensional multiple signal classification (MUSIC) applied independently to each parameter. The proposed method enables accurate and efficient estimation of NF target motion parameters. Simulation results demonstrate a normalized mean squared error (NMSE) of -40 dB for location and velocity estimates compared to maximum likelihood estimation, while significantly reducing computational complexity.

eess.SP↗

arXiv2025

Digital Twin-Assisted Explainable AI for Robust Beam Prediction in mmWave MIMO Systems

In line with the AI-native 6G vision, explainability and robustness are crucial for building trust and ensuring reliable performance in millimeter-wave (mmWave) systems. Efficient beam alignment is essential for initial access, but deep learning (DL) solutions face challenges, including high data collection overhead, hardware constraints, lack of explainability, and susceptibility to adversarial attacks. This paper proposes a robust and explainable DL-based beam alignment engine (BAE) for mmWave multiple-input multiple output (MIMO) systems. The BAE uses received signal strength indicator (RSSI) measurements from wide beams to predict the best narrow beam, reducing the overhead of exhaustive beam sweeping. To overcome the challenge of real-world data collection, this work leverages a site-specific digital twin (DT) to generate synthetic channel data closely resembling real-world environments. A model refinement via transfer learning is proposed to fine-tune the pre-trained model residing in the DT with minimal real-world data, effectively bridging mismatches between the digital replica and real-world environments. To reduce beam training overhead and enhance transparency, the framework uses deep Shapley additive explanations (SHAP) to rank input features by importance, prioritizing key spatial directions and minimizing beam sweeping. It also incorporates the Deep k-nearest neighbors (DkNN) algorithm, providing a credibility metric for detecting out-of-distribution inputs and ensuring robust, transparent decision-making. Experimental results show that the proposed framework reduces real-world data needs by 70%, beam training overhead by 62%, and improves outlier detection robustness by up to 8.5x, achieving near-optimal spectral efficiency and transparent decision making compared to traditional softmax based DL models.

cs.LG↗

arXiv2025

Analyzing URA Geometry for Enhanced Spatial Multiplexing and Extended Near-Field Coverage

With the deployment of large antenna arrays at high frequency bands, future wireless communication systems are likely to operate in the radiative near-field. Unlike far-field beam steering, near-field beams can be focused within a spatial region of finite depth, enabling spatial multiplexing in both the angular and range dimensions. This paper derives the beamdepth for a generalized uniform rectangular array (URA) and investigates how array geometry influences the near-field beamdepth and the limits where near-field beamfocusing is achievable. To characterize the near-field boundary in terms of beamfocusing and spatial multiplexing gains, we define the effective beamfocusing Rayleigh distance (EBRD) for a generalized URA. Our analysis reveals that while a square URA achieves the narrowest beamdepth, the EBRD is maximized for a wide or tall URA. However, despite its narrow beamdepth, a square URA may experience a reduction in multiuser sum rate due to its severely constrained EBRD. Simulation results confirm that a wide or tall URA achieves a sum rate of 3.5 X more than that of a square URA, benefiting from the extended EBRD and improved spatial multiplexing capabilities.

eess.SP↗

arXiv2025

Near-Field ISAC: Synergy of Dual-Purpose Codebooks and Space-Time Adaptive Processing

Integrated sensing and communication (ISAC) has emerged as a transformative paradigm, enabling situationally aware and perceptive next-generation wireless networks through the co-design of shared network resources. With the adoption of millimeter-wave (mmWave) and terahertz (THz) frequency bands, ultra-massive MIMO (UM-MIMO) systems and holographic surfaces unlock the potential of near-field (NF) propagation, characterized by spherical wavefronts that facilitate beam manipulation in both angular and range domains. This paper presents a unified approach to near-field beam-training and sensing, introducing a dual-purpose codebook design that employs discrete Fourier transform (DFT)-based codebooks for coarse estimation of sensing parameters and polar codebooks for parameter refinement. Leveraging these range and angle estimates, a customized low-complexity space-time adaptive processing (STAP) technique is proposed for NF-ISAC to detect slow-moving targets and efficiently mitigate clutter. The interplay between codebooks and NF-STAP framework offers three key advantages: reduced communication beam training overhead, improved estimation accuracy, and minimal STAP computational complexity. Simulation results show that the proposed framework can reduce STAP complexity by three orders of magnitude, validating efficacy, and highlighting the potential of the proposed approach to seamlessly integrate NF communication and sensing functionalities in future wireless networks.

eess.SP↗

arXiv2025

Near-Field Beam Prediction Using Far-Field Codebooks in Ultra-Massive MIMO Systems

Ultra-massive multiple-input multiple-output (UM-MIMO) technology is a key enabler for 6G networks, offering exceptional high data rates in millimeter-wave (mmWave) and Terahertz (THz) frequency bands. The deployment of large antenna arrays at high frequencies transitions wireless communication into the radiative near-field, where precise beam alignment becomes essential for accurate channel estimation. Unlike far-field systems, which rely on angular domain only, near-field necessitates beam search across both angle and distance dimensions, leading to substantially higher training overhead. To address this challenge, we propose a discrete Fourier transform (DFT) based beam alignment to mitigate the training overhead. We highlight that the reduced path loss at shorter distances can compensate for the beamforming losses typically associated with using far-field codebooks in near-field scenarios. Additionally, far-field beamforming in the near-field exhibits angular spread, with its width determined by the user's range and angle. Leveraging this relationship, we develop a correlation interferometry (CI) algorithm, termed CI-DFT, to efficiently estimate user angle and range parameters. Simulation results demonstrate that the proposed scheme achieves performance close to exhaustive search in terms of achievable rate while significantly reducing the training overhead by 87.5%.

eess.SP↗

arXiv2025

Explainable Autoencoder Design for RSSI-Based Multi-User Beam Probing and Hybrid Precoding

This paper introduces a novel neural network (NN) structure referred to as an ``Auto-hybrid precoder'' (Auto-HP) and an unsupervised deep learning (DL) approach that jointly designs \ac{mmWave} probing beams and hybrid precoding matrix design for mmWave multi-user communication system with minimal training pilots. Our learning-based model capitalizes on prior channel observations to achieve two primary goals: designing a limited set of probing beams and predicting off-grid \ac{RF} beamforming vectors. The Auto-HP framework optimizes the probing beams in an unsupervised manner, concentrating the sensing power on the most promising spatial directions based on the surrounding environment. This is achieved through an innovative neural network architecture that respects \ac{RF} chain constraints and models received signal strength power measurements using complex-valued convolutional layers. Then, the autoencoder is trained to directly produce RF beamforming vectors for hybrid architectures, unconstrained by a predefined codebook, based on few projected received signal strength indicators (RSSIs). Finally, once the RF beamforming vectors for the multi-users are predicted, the baseband (BB) digital precoders are designed accounting for the multi-user interference. The Auto-HP neural network is trained end-to-end (E2E) in an unsupervised learning manner with a customized loss function that aims to maximizes the received signal strength. The adequacy of the Auto-HP NN's bottleneck layer dimension is evaluated from an information theory perspective, ensuring maximum data compression and reliable RF beam predictions.

cs.NI↗