Searcharxiv⌕ Search

arXiv subjects

Austin G. Fowler

Publications and source records attributed to Austin G. Fowler.

At least 55 records · Page 3Linked to original sources

Coping with qubit leakage in topological codes

Many physical systems considered promising qubit candidates are not, in fact, two-level systems. Such systems can leak out of the preferred computational states, leading to errors on any qubits that interact with leaked qubits. Without specific methods of dealing with leakage, long-lived leakage can lead to time-correlated errors. We study the impact of such time-correlated errors on topological quantum error correction codes, which are considered highly practical codes, using the repetition code as a representative case study. We show that, under physically reasonable assumptions, a threshold error rate still exists, however performance is significantly degraded. We then describe simple additional quantum circuitry that, when included in the error detection cycle, restores performance to acceptable levels.

quant-ph↗

Polyestimate: instantaneous open source surface code analysis

The surface code is highly practical, enabling arbitrarily reliable quantum computation given a 2-D nearest-neighbor coupled array of qubits with gate error rates below approximately 1%. We describe an open source library, Polyestimate, enabling a user with no knowledge of the surface code to specify realistic physical quantum gate error models and obtain logical error rate estimates. Functions allowing the user to specify simple depolarizing error rates for each gate have also been included. Every effort has been made to make this library user-friendly.

quant-ph↗

A bridge to lower overhead quantum computation

Two primary challenges stand in the way of practical large-scale quantum computation, namely achieving sufficiently low error rate quantum gates and implementing interesting quantum algorithms with a physically reasonable number of qubits. In this work we address the second challenge, presenting a new technique, bridge compression, which enables remarkably low volume structures to be found that implement complex computations in the surface code. The surface code has a number of highly desirable properties, including the ability to achieve arbitrarily reliable computation given sufficient qubits and quantum gate error rates below approximately 1%, and the use of only a 2-D array of qubits with nearest neighbor interactions. As such, our compression technique is of great practical relevance.

quant-ph↗

Quantum circuit optimization by topological compaction in the surface code

The fragile nature of quantum information limits our ability to construct large quantities of quantum bits suitable for quantum computing. An important goal, therefore, is to minimize the amount of resources required to implement quantum algorithms, many of which are serial in nature and leave large numbers of qubits idle much of the time unless compression techniques are used. Furthermore, quantum error-correcting codes, which are required to reduce the effects of noise, introduce additional resource overhead. We consider a strategy for quantum circuit optimization based on topological deformation in the surface code, one of the best performing and most practical quantum error-correcting codes. Specifically, we examine the problem of minimizing computation time on a two-dimensional qubit lattice of arbitrary, but fixed dimension, and propose two algorithms for doing so.

quant-ph↗

Surface code quantum computing by lattice surgery

In recent years, surface codes have become a leading method for quantum error correction in theoretical large scale computational and communications architecture designs. Their comparatively high fault-tolerant thresholds and their natural 2-dimensional nearest neighbour (2DNN) structure make them an obvious choice for large scale designs in experimentally realistic systems. While fundamentally based on the toric code of Kitaev, there are many variants, two of which are the planar- and defect- based codes. Planar codes require fewer qubits to implement (for the same strength of error correction), but are restricted to encoding a single qubit of information. Interactions between encoded qubits are achieved via transversal operations, thus destroying the inherent 2DNN nature of the code. In this paper we introduce a new technique enabling the coupling of two planar codes without transversal operations, maintaining the 2DNN of the encoded computer. Our lattice surgery technique comprises splitting and merging planar code surfaces, and enables us to perform universal quantum computation (including magic state injection) while removing the need for braided logic in a strictly 2DNN design, and hence reduces the overall qubit resources for logic operations. Those resources are further reduced by the use of a rotated lattice for the planar encoding. We show how lattice surgery allows us to distribute encoded GHZ states in a more direct (and overhead friendly) manner, and how a demonstration of an encoded CNOT between two distance 3 logical states is possible with 53 physical qubits, half of that required in any other known construction in 2D.

quant-ph↗

Time-optimal quantum computation

Given any quantum error correcting code permitting universal fault-tolerant quantum computation and transversal measurement of logical X and Z, we describe how to perform time-optimal quantum computation, meaning the execution of an arbitrary Clifford circuit followed by a layer of independent T gates and any necessary feedforward measurement determined corrective S gates all in the time of a single physical measurement. We assume fast classical processing and classical communication, and argue the reasonableness of this assumption. This enables fault-tolerant quantum computation to be performed orders of magnitude faster than previously thought possible, with the execution time independent of the error correction strength.

quant-ph↗

Surface code implementation of block code state distillation

State distillation is the process of taking a number of imperfect copies of a particular quantum state and producing fewer better copies. Until recently, the lowest overhead method of distilling states |A>=(|0>+e^{iπ/4}|1>)/\sqrt{2} produced a single improved |A> state given 15 input copies. New block code state distillation methods can produce k improved |A> states given 3k+8 input copies, potentially significantly reducing the overhead associated with state distillation. We construct an explicit surface code implementation of block code state distillation and quantitatively compare the overhead of this approach to the old. We find that, using the best available techniques, for parameters of practical interest, block code state distillation does not always lead to lower overhead, and, when it does, the overhead reduction is typically less than a factor of three.

quant-ph↗

Accurate simulations of planar topological codes cannot use cyclic boundaries

Cyclic boundaries are used in many branches of physics and mathematics, typically to assist the approximation of a large space. We show that when determining the performance of planar, fault-tolerant, topological quantum error correction, using cyclic boundaries leads to a significant underestimate of the logical error rate. We present cyclic and non-cyclic surface code simulations exhibiting this discrepancy, and analytic formulae precisely reproducing the observed behavior in the limit of low physical error. These asymptotic formulae are then used to prove that the underestimate is exponentially large in the code distance d at any fixed physical error rate p below the threshold error rate p_th.

quant-ph↗

High threshold universal quantum computation on the surface code

We present a comprehensive and self-contained simplified review of the quantum computing scheme of Phys. Rev. Lett. 98, 190504 (2007), which features a 2-D nearest neighbor coupled lattice of qubits, a threshold error rate approaching 1%, natural asymmetric and adjustable strength error correction and low overhead arbitrarily long-range logical gates. These features make it by far the best and most practical quantum computing scheme devised to date. We restrict the discussion to direct manipulation of the surface code using the stabilizer formalism, both of which we also briefly review, to make the scheme accessible to a broad audience.

quant-ph↗

Proof of finite surface code threshold for matching

The field of quantum computation currently lacks a formal proof of experimental feasibility. Qubits are fragile and sophisticated quantum error correction is required to achieve reliable quantum computation. The surface code is a promising quantum error correction code, requiring only a physically reasonable 2-D lattice of qubits with nearest neighbor interactions. However, existing proofs that reliable quantum computation is possible using this code assume the ability to measure four-body operators and, despite making this difficult to realize assumption, require that the error rate of these operator measurements is less than 10^-9, an unphysically low target. High error rates have been proved tolerable only when assuming tunable interactions of strength and error rate independent of distance, which is also unphysical. In this work, given a 2-D lattice of qubits with only nearest neighbor two-qubit gates, and single-qubit measurement, initialization, and unitary gates, all of which have error rate p, we prove that arbitrarily reliable quantum computation is possible provided p<7.4x10^-4, a target that many experiments have already achieved. This closes a long-standing open problem, formally proving the experimental feasibility of quantum computation under physically reasonable assumptions.

quant-ph↗

Surface code with decoherence: An analysis of three superconducting architectures

We consider realistic, multi-parameter error models and investigate the performance of the surface code for three possible fault-tolerant superconducting quantum computer architectures. We map amplitude and phase damping to a diagonal Pauli "depolarization" channel via the Pauli twirl approximation, and obtain the logical error rate as a function of the qubit T1, T2 and state preparation, gate, and readout errors. A numerical Monte Carlo simulation is performed to obtain the logical error rates and a leading-order analytic formula is derived to estimate their behavior below threshold. Our results suggest that scalable fault-tolerant quantum computation should be possible with existing superconducting devices.

quant-ph↗

Surface codes: Towards practical large-scale quantum computation

This article provides an introduction to surface code quantum computing. We first estimate the size and speed of a surface code quantum computer. We then introduce the concept of the stabilizer, using two qubits, and extend this concept to stabilizers acting on a two-dimensional array of physical qubits, on which we implement the surface code. We next describe how logical qubits are formed in the surface code array and give numerical estimates of their fault-tolerance. We outline how logical qubits are physically moved on the array, how qubit braid transformations are constructed, and how a braid between two logical qubits is equivalent to a controlled-NOT. We then describe the single-qubit Hadamard, S and T operators, completing the set of required gates for a universal quantum computer. We conclude by briefly discussing physical implementations of the surface code. We include a number of appendices in which we provide supplementary information to the main text.

quant-ph↗

Topological code Autotune

Many quantum systems are being investigated in the hope of building a large-scale quantum computer. All of these systems suffer from decoherence, resulting in errors during the execution of quantum gates. Quantum error correction enables reliable quantum computation given unreliable hardware. Unoptimized topological quantum error correction (TQEC), while still effective, performs very suboptimally, especially at low error rates. Hand optimizing the classical processing associated with a TQEC scheme for a specific system to achieve better error tolerance can be extremely laborious. We describe a tool Autotune capable of performing this optimization automatically, and give two highly distinct examples of its use and extreme outperformance of unoptimized TQEC. Autotune is designed to facilitate the precise study of real hardware running TQEC with every quantum gate having a realistic, physics-based error model.

quant-ph↗

Checking the error correction strength of arbitrary surface code logical gates

Topologically quantum error corrected logical gates are complex. Chains of errors can form in space and time and diagonally in spacetime. It is highly nontrivial to determine whether a given logical gate is free of low weight combinations of errors leading to failure. We report a new tool Nestcheck capable of analyzing an arbitrary topological computation and determining the minimum number of errors required to cause failure.

quant-ph↗

Towards practical classical processing for the surface code: timing analysis

Topological quantum error correction codes have high thresholds and are well suited to physical implementation. The minimum weight perfect matching algorithm can be used to efficiently handle errors in such codes. We perform a timing analysis of our current implementation of the minimum weight perfect matching algorithm. Our implementation performs the classical processing associated with an nxn lattice of qubits realizing a square surface code storing a single logical qubit of information in a fault-tolerant manner. We empirically demonstrate that our implementation requires only O(n^2) average time per round of error correction for code distances ranging from 4 to 512 and a range of depolarizing error rates. We also describe tests we have performed to verify that it always obtains a true minimum weight perfect matching.

quant-ph↗

Layered architecture for quantum computing

We develop a layered quantum computer architecture, which is a systematic framework for tackling the individual challenges of developing a quantum computer while constructing a cohesive device design. We discuss many of the prominent techniques for implementing circuit-model quantum computing and introduce several new methods, with an emphasis on employing surface code quantum error correction. In doing so, we propose a new quantum computer architecture based on optical control of quantum dots. The timescales of physical hardware operations and logical, error-corrected quantum gates differ by several orders of magnitude. By dividing functionality into layers, we can design and analyze subsystems independently, demonstrating the value of our layered architectural approach. Using this concrete hardware platform, we provide resource analysis for executing fault-tolerant quantum algorithms for integer factoring and quantum simulation, finding that the quantum dot architecture we study could solve such problems on the timescale of days.

quant-ph↗

Low-overhead surface code logical Hadamard

We present an improved low-overhead implementation of surface code logical H. We describe in full detail logical H applied to a single distance 7 double-defect logical qubit in an otherwise idle scalable array such qubits. Our goal is to provide a clear description of logical H and to emphasize that the surface code possesses low-overhead implementations of the entire Clifford group.

quant-ph↗

Analytic asymptotic performance of topological codes

Topological quantum error correction codes are extremely practical, typically requiring only a 2-D lattice of qubits with tunable nearest neighbor interactions yet tolerating high physical error rates p. It is computationally expensive to simulate the performance of such codes at low p, yet this is a regime we wish to study as low physical error rates lead to low qubit overhead. We present a very general method of analytically estimating the low p performance of the most promising class of topological codes. Our method can handle arbitrary periodic quantum circuits implementing the error detection associated with this class of codes, and arbitrary Pauli error models for each type of quantum gate. Our analytic expressions take only seconds to obtain, versus hundreds of hours to perform equivalent low p simulations.

quant-ph↗