Searcharxiv⌕ Search

arXiv subjects

B. Geyer

Publications and source records attributed to B. Geyer.

At least 37 records · Page 2Linked to original sources

Target Mass Corrections in Diffractive Scattering

We describe the twist-2 contributions to inclusive unpolarized and polarized deep-inelastic diffractive scattering in an operator approach. The representation refers to the observed large rapidity gap but does not require reference to a pomeron picture. We discuss both the case of vanishing target mass $M$ and momentum transfer $t$ as well as the effects at finite $t$ and $M$, which lead to modifications at large $β$ and low values of $Q^2$.

hep-ph↗

Analytic approach to the thermal Casimir force between metal and dielectric

The analytic asymptotic expressions for the Casimir free energy, pressure and entropy at low temperature in the configuration of one metal and one dielectric plate are obtained. For this purpose we develop the perturbation theory in a small parameter proportional to the product of the separation between the plates and the temperature. This is done using both the simplified model of an ideal metal and of a dielectric with constant dielectric permittivity and for the realistic case of the metal and dielectric with frequency-dependent dielectric permittivities. The analytic expressions for all related physical quantities at high temperature are also provided. The obtained analytic results are compared with numerical computations and good agreement is found. We demonstrate for the first time that the Lifshitz theory, when applied to the configuration of metal-dielectric, satisfies the requirements of thermodynamics if the static dielectric permittivity of a dielectric plate is finite. If it is infinitely large, the Lifshitz formula is shown to violate the Nernst heat theorem. The implications of these results for the thermal quantum field theory in Matsubara formulation and for the recent measurements of the Casimir force between metal and semiconductor surfaces are discussed.

quant-ph↗

Recent Results on Thermal Casimir Force between Dielectrics and Related Problems

We review recent results obtained in the physics of the thermal Casimir force acting between two dielectrics, dielectric and metal, and between metal and semiconductor. The detailed derivation for the low-temperature behavior of the Casimir free energy, pressure and entropy in the configuration of two real dielectric plates is presented. For dielectrics with finite static dielectric permittivity it is shown that the Nernst heat theorem is satisfied. Hence, the Lifshitz theory of the van der Waals and Casimir forces is demonstrated to be consistent with thermodynamics. The nonzero dc conductivity of dielectric plates is proved to lead to a violation of the Nernst heat theorem and, thus, is not related to the phenomenon of dispersion forces. The low-temperature asymptotics of the Casimir free energy, pressure and entropy are derived also in the configuration of one metal and one dielectric plate. The results are shown to be consistent with thermodynamics if the dielectric plate possesses a finite static dielectric permittivity. If the dc conductivity of a dielectric plate is taken into account this results in the violation of the Nernst heat theorem. We discuss both the experimental and theoretical results related to the Casimir interaction between metal and semiconductor with different charge carrier density. Discussions in the literature on the possible influence of spatial dispersion on the thermal Casimir force are analyzed. In conclusion, the conventional Lifshitz theory taking into account only the frequency dispersion remains the reliable foundation for the interpretation of all present experiments.

quant-ph↗

Lifshitz-type formulas for graphene and single-wall carbon nanotubes: van der Waals and Casimir interations

Lifshitz-type formulas are obtained for the van der Waals and Casimir interaction between graphene and a material plate, graphene and an atom or a molecule, and between a single-wall carbon nanotube and a plate. The reflection properties of electromagnetic oscillations on graphene are governed by the specific boundary conditions imposed on the infinitely thin positively charged plasma sheet, carrying a continuous fluid with some mass and charge density. The obtained formulas are applied to graphene interacting with Au and Si plates, to hydrogen atoms and molecules interacting with graphene, and to single-wall carbon nanotubes interacting with Au and Si plates. The generalizations to more complicated carbon nanostructures are discussed.

cond-mat.other↗

Comment on "On the temperature dependence of the Casimir effect"

Recently, Brevik et al. [Phys. Rev. E 71, 056101 (2005)] adduced arguments against the traditional approach to the thermal Casimir force between real metals and in favor of one of the alternative approaches. The latter assumes zero contribution from the transverse electric mode at zero frequency in qualitative disagreement with unity as given by the thermal quantum field theory for ideal metals. Those authors claim that their approach is consistent with experiments as well as with thermodynamics. We demonstrate that these conclusions are incorrect. We show specifically that their results are contradicted by four recent experiments and also violate the third law of thermodynamics (the Nernst heat theorem).

quant-ph↗

Universal behavior of dispersion forces between two dielectric plates in the low-temperature limit

The universal analytic expressions in the limit of low temperatures (short separations) are obtained for the free energy, entropy and pressure between the two parallel plates made of any dielectric. The analytical proof of the Nernst heat theorem in the case of dispersion forces acting between dielectrics is provided. This permitted us to formulate the stringent thermodynamical requirement that must be satisfied in all models used in the Casimir physics.

quant-ph↗

Present status of controversies regarding the thermal Casimir force

It is well known that, beginning in 2000, the behavior of the thermal correction to the Casimir force between real metals has been hotly debated. As was shown by several research groups, the Lifshitz theory, which provides the theoretical foundation for the calculation of both the van der Waals and Casimir forces, leads to different results depending on the model of metal conductivity used. To resolve these controversies, the theoretical considerations based on the principles of thermodynamics and new experimental tests were invoked. We analyze the present status of the problem (in particular, the advantages and disadvantages of the approaches based on the surface impedance and on the Drude model dielectric function) using rigorous analytical calculations of the entropy of a fluctuating field. We also discuss the results of a new precise experiment on the determination of the Casimir pressure between two parallel plates by means of a micromechanical torsional oscillator.

quant-ph↗

Thermal quantum field theory and the Casimir interaction between dielectrics

The Casimir and van der Waals interaction between two dissimilar thick dielectric plates is reconsidered on the basis of thermal quantum field theory in Matsubara formulation. We briefly review two main derivations of the Lifshitz formula in the framework of thermal quantum field theory without use of the fluctuation-dissipation theorem. A set of special conditions is formulated under which these derivations remain valid in the presence of dissipation. The low-temperature behavior of the Casimir and van der Waals interactions between dissimilar dielectrics is found analytically from the Lifshitz theory for both an idealized model of dilute dielectrics and for real dielectrics with finite static dielectric permittivities. The free energy, pressure and entropy of the Casimir and van der Waals interactions at low temperatures demonstrate the same universal dependence on the temperature as was previously discovered for ideal metals. The entropy vanishes when temperature goes to zero proving the validity of the Nernst heat theorem. This solves the long-standing problem on the consistency of the Lifshitz theory with thermodynamics in the case of dielectric plates. The obtained asymptotic expressions are compared with numerical computations for both dissimilar and similar real dielectrics and found to be in excellent agreement. The role of the zero-frequency term in Matsubara sum is investigated in the case of dielectric plates. It is shown that the inclusion of conductivity in the model of dielectric response leads to the violation of the Nernst heat theorem. The applications of this result to the topical problems of noncontact atomic friction and the Casimir interaction between real metals are discussed.

quant-ph↗

Thermal corrections in Casimir interaction between metal and dielectric

The Casimir interaction between two thick parallel plates, one made of metal and the other of dielectric, is investigated at nonzero temperature. It is shown that in some temperature intervals the Casimir pressure and the free energy of a fluctuating field are the nonmonotonous functions of temperature and the respective Casimir entropy can be negative. The physical interpretation for these conclusions is given. At the same time we demonstrate that the entropy vanishes when the temperature goes to zero, i.e., in the Casimir interaction between metal and dielectric the Nernst heat theorem is satisfied. The investigation is performed both analytically, by using the model of an ideal metal and dilute dielectric or dielectric with a frequency-independent dielectric permittivity, and numerically for real metal (Au) and dielectrics with different behavior of the dielectric permittivity along the imaginary frequency axis (Si and Al_2O_3).

quant-ph↗

The twist-2 Compton operator and its hidden Wandzura-Wilczek and Callan-Gross relations

Power corrections for virtual Compton scattering at leading twist are etermined at operator level. From the complete off-cone representation of the twist-2 Compton operator integral representations for the trace, antisymmetric and symmetric part of that operator are derived. The operator valued invariant functions are written in terms of iterated operators and may lead to interrelations. For matrix elements they go over into relations for generalized parton distributions. -- Reducing to the s-channel relevant part one gets operator pre-forms of the Wandzura-Wilczek and the (target mass corrected) Callan-Gross relations whose structure is exactly the same as known from the case of deep inelastic scattering; taking non-forward matrix elements one reproduces earlier results [B. Geyer, D. Robaschik and J. Eilers, Nucl. Phys. B 704 (2005) 279] for the absorptive part of the virtual Compton amplitude. -- All these relations, obtained without any approximation or using equations of motion, are determined solely by the twist-2 structure of the underlying operator and, therefore, are purely of geometric origin.

hep-ph↗

Target mass corrections for virtual Compton scattering at twist-2 and generalized, non-forward Wandzura-Wilczek and Callan-Gross relations

The off-cone Compton operator of twist-2 is Fourier transformed using a general procedure which is applicable, in principle, to any QCD tensor operator of definite (geometric) twist. That method allows, after taking the non-forward matrix elements, to separate quite effectively their imaginary part and to reveal some hidden structure in terms of appropriately defined variables, including generalized Nachtmann variables. In this way, without using the equations of motion, generalizations of the Wandzura-Wilzcek relation and of the mass-corrected Callan-Gross relation to the non-forward scattering, having the same shape as in the forward case, are obtained. In addition, new relations for those structure functions which vanish in the forward case are derived. These structure functions are written in terms of iterated generalized parton distributions of $n$-th order.

hep-ph↗

Basic properties of Fedosov supermanifolds

Basic properties of even (odd) supermanifolds endowed with a connection respecting a given symplectic structure are studied. Such supermanifolds can be considered as generalization of Fedosov manifolds to the supersymmetric case.

hep-th↗

The basic cohomology of the twisted N=16, D=2 super Maxwell theory

We consider a recently proposed two-dimensional Abelian model for a Hodge theory, which is neither a Witten type nor a Schwarz type topological theory. It is argued that this model is not a good candidate for a Hodge theory since, on-shell, the BRST Laplacian vanishes. We show, that this model allows for a natural extension such that the resulting topological theory is of Witten type and can be identified with the twisted N=16, D=2 super Maxwell theory. Furthermore, the underlying basic cohomology preserves the Hodge-type structure and, on-shell, the BRST Laplacian does not vanish.

hep-th↗

Modified triplectic quantization in general coordinates

We present an extension of previous results (hep-th/0105215)on the quantization of general gauge theories within the BRST-antBRST invatiant Lagrangian scheme in general coordinates, namely, we consider the case when the base manifold of fields and antifields is a supermanifold desribed in terms of both bosonic and fermionic variables.

hep-th↗

Surface-impedance approach solves problems with the thermal Casimir force between real metals

The surface impedance approach to the description of the thermal Casimir effect in the case of real metals is elaborated starting from the free energy of oscillators. The Lifshitz formula expressed in terms of the dielectric permittivity depending only on frequency is shown to be inapplicable in the frequency region where a real current may arise leading to Joule heating of the metal. The standard concept of a fluctuating electromagnetic field on such frequencies meets difficulties when used as a model for the zero-point oscillations or thermal photons in the thermal equilibrium inside metals. Instead, the surface impedance permits not to consider the electromagnetic oscillations inside the metal but taking the realistic material properties into account by means of the effective boundary condition. An independent derivation of the Lifshitz-type formulas for the Casimir free energy and force between two metal plates is presented within the impedance approach. It is shown that they are free of the contradictions with thermodynamics which are specific to the usual Lifshitz formula for dielectrics in combination with the Drude model. We demonstrate that in the impedance approach the zero-frequency contribution is uniquely fixed by the form of impedance function and does not need any of the ad hoc prescriptions intensively discussed in the recent literature. As an example, the computations of the Casimir free energy between two gold plates are performed at different separations and temperatures. It is argued that the surface impedance approach lays a reliable framework for the future measurements of the thermal Casimir force.

quant-ph↗