Searcharxiv⌕ Search

arXiv subjects

Baptiste Gault

Publications and source records attributed to Baptiste Gault.

At least 73 records · Page 4Linked to original sources
arXiv2023

Scalable Substrate Development for Aqueous Biological Samples for Atom Probe Tomography

Reliable and consistent preparation of atom probe tomography (APT) specimens from aqueous and hydrated biological specimens remains a significant challenge. One particularly difficult process step is the use of a focused ion beam (FIB) instrument for preparing the required needle-shaped specimen, typically involving a "lift-out" procedure of a small sample of material. Here, two alternative substrate designs are introduced that enable using FIB only for sharpening, along with example APT datasets. The first design is a laser-cut FIB-style half-grid close to those used for transmission-electron microscopy, that can be used in a grid holder compatible with APT pucks. The second design is a larger, standalone self-supporting substrate called a "crown", with several specimen positions that self-aligns in APT pucks, prepared by electrical discharge machining (EDM). Both designs are made nanoporous, to provide strength to the liquid-substrate interface, using chemical and vacuum dealloying. We select alpha brass a simple, widely available, lower-cost alternative to previously proposed substrates. We present the resulting designs, APT data, and provide suggestions to help drive wider community adoption.

physics.app-ph↗
arXiv2023

Chemical heterogeneity enhances hydrogen resistance in high-strength steels

When H, the lightest, smallest and most abundant atom in the universe, makes its way into a high-strength alloy (>650 MPa), the material's load-bearing capacity is abruptly lost. This phenomenon, known as H embrittlement, was responsible for the catastrophic and unpredictable failure of large engineering structures in service. The inherent antagonism between high strength requirements and H embrittlement susceptibility strongly hinders the design of lightweight yet reliable structural components needed for carbon-free hydrogen-propelled industries and reduced-emission transportation solutions. Inexpensive and scalable alloying and microstructural solutions that enable both, an intrinsically high resilience to H and high mechanical performance, must be found. Here we introduce a counterintuitive strategy to exploit typically undesired chemical heterogeneity within the material's microstructure that allows the local enhancement of crack resistance and local H trapping, thereby enhancing the resistance against H embrittlement. We deploy this approach to a lightweight, high-strength steel and produce a high-number density Mn-rich zones dispersed within the microstructure. These solute-rich buffer regions allow for local micro-tuning of the phase stability, arresting H-induced microcracks thus interrupting the H-assisted damage evolution chain, regardless of how and when H is introduced and also regardless of the underlying embrittling mechanisms. A superior H embrittlement resistance, increased by a factor of two compared to a reference material with a homogeneous solute distribution within each microstructure constituent, is achieved at no expense of the material's strength and ductility.

cond-mat.mtrl-sci↗
arXiv2023

Crack arrest markings in stress corrosion cracking of 7xxx aluminium alloys: insights into active hydrogen embrittlement mechanisms

Crack growth in stress corrosion cracking (SCC) in 7xxx Al alloys is an intermittent process, which generates successive crack arrest markings (CAMs) visible on the fracture surface. It is conjectured that H is generated at the crack tip during crack arrest, which then facilitates crack advancement through hydrogen embrittlement. Here, nanoscale imaging by 4D-scanning-transmission electron microscopy and atom probe tomography show that CAMs are produced by oxidation at the arrested crack tip, matrix precipitates dissolve and solute diffuse towards the growing CAM. Substantial homogenous residual strain remains underneath the fracture surface, indicative of non-localized plastic activity. Our study suggests that H induces crack propagation through decohesion.

cond-mat.mtrl-sci↗
arXiv2023

Near-Atomic Scale Perspective on the Oxidation of Ti$_3$C$_2$T$_x$ MXenes: Insights from Atom Probe Tomography

MXenes are a family of 2D transition metal carbides and nitrides with remarkable properties and great potential for energy storage and catalysis applications. However, their oxidation behavior is not yet fully understood, and there are still open questions regarding the spatial distribution and precise quantification of surface terminations, intercalated ions, and possible uncontrolled impurities incorporated during synthesis and processing. Here, atom probe tomography analysis of as-synthesized Ti$_3$C$_2$T$_x$ MXenes reveals the presence of alkali (Li, Na) and halogen (Cl, F) elements as well as unetched Al. Following oxidation of the colloidal solution of MXenes, it is observed that the alkalies enriched in TiO$_2$ nanowires. Although these elements are tolerated through the incorporation by wet chemical synthesis, they are often overlooked when the activity of these materials is considered, particularly during catalytic testing. This work demonstrates how the capability of atom probe tomography to image these elements in 3D at the near-atomic scale can help to better understand the activity and degradation of MXenes, in order to guide their synthesis for superior functional properties.

cond-mat.mtrl-sci↗
arXiv2023

The Premartensite and Martensite in Fe50Rh50 System

Metallic/intermetalic materials with BCC structures hold an intrinsic instability due to phonon softening along [110] dirrection, causing BCC to lower-symmetry phases transformation when the BCC structures are thermally or mechanically stressed. Fe50Rh50 binary system is one of the exceptional BCC structures (ordered-B2) that has not been yet showing such transformation upon application of thermal stress, although mechanical deformation results in B2 to disordered FCC (gamma) and L10 phases transformation. Here, a comprehensive transmission electron microscopy (TEM) study is conducted on thermally-stressed samples of Fe50Rh50 aged at water and liquid nitrogen from 1150 degree C and 1250 degree C. The results show that, samples quenched from 1150 degree C into water and liquid nitrogen show presence of 1/4{110} and 1/2{110} satellite reflections, the latter of which is expected from phonon dispersion curves obtained by density functional theory calculation. Therefore, it is believed that Fe50Rh50 maintains the B2 structure that is in premartensite state. Once Fe50Rh50 is quenched from 1250 degree C into liquid nitrogen, formation of two short-range ordered tetragonal phases with various c/a ratios (~1.15 and 1.4) is observed in line with phases formed from mechanically deformed (30%) sample. According to our observations, an accurate atomistic shear model ({110}<1-10>) is presented that describes the martensitic transformation of B2 to these tetragonal phases. These findings offer implications useful for understanding of magnetic and physical characteristics of metallic/intermetallic materials.

cond-mat.mtrl-sci↗
arXiv2023

Atomic scale understanding of the role of hydrogen and oxygen segregation in the embrittlement of grain boundaries in a twinning induced plasticity steel

Twinning induced plasticity (TWIP) steels are high strength metallic materials with potential for structural components in e.g. automotive applications. However, they are prone to hydrogen embrittlement (HE) and galvanic corrosion. We investigated the susceptibility of a model Fe 27Mn 0.3C (wt%) TWIP steel towards HE and oxidation at the sub-nanometer scale by atom probe tomography. We measured segregation of hydrogen and oxygen at grain boundaries, which appears to be associated to a strong manganese depletion. Our study suggests a correlation between HE and oxidation mechanisms in TWIP steels, which we argue can combine to favor the previously reported hydrogen enhanced decohesion (HEDE) of grain boundaries.

cond-mat.mtrl-sci↗
arXiv2023

Hydrogen-induced hardening of a high-manganese twinning induced plasticity steel

High-manganese twinning-induced plasticity (TWIP) steels exhibit high strain hardening, high tensile strength, and high ductility, which make them attractive for structural applications. At low tensile strain rates, TWIP steels are prone to hydrogen embrittlement (HE). Here though, we study the hardening and strengthening resulting from electrochemical hydrogen-charging of a surface layer of a Fe-26.9Mn-0.28C (wt.%) TWIP steel. We observed a 20% increase in yield strength following the electrochemical hydrogen-charging, accompanied by a reduction in ductility from 75% to 10% at a tensile strain rate of 10-3s-1. The microstructural evolution during tensile deformation was examined at strain levels of 3%, 5% and 7% by electron backscatter diffraction (EBSD) and electron channeling contrast imaging (ECCI) to study the dislocation structure of the hardened region. As expected, the microstructure of the hydrogen-hardened and the uncharged regions of the material evolve differently. The uncharged areas show entangled dislocation structures, indicating slip from a limited number of potentially coplanar slip systems. In contrast, hydrogen segregated to the grain boundaries, revealed by the deuterium-labelled atom probe tomography, delays the dislocation nucleation by blocking dislocation sources at the grain boundaries. The charged areas hence first show the formation of cells, indicating dislocation entanglement from more non-coplanar slip systems. With increasing strain, these cells dissolve, and stacking faults and strain-induced ε-martensite are formed, promoted by the presence of hydrogen. The influence of hydrogen on dislocation structures and the overall deformation mechanism is discussed in details.

cond-mat.mtrl-sci↗
arXiv2023

A machine learning framework for quantifying chemical segregation and microstructural features in atom probe tomography data

Atom probe tomography (APT) is ideally suited to characterize and understand the interplay of chemical segregation and microstructure in modern multicomponent materials. Yet, the quantitative analysis typically relies on human expertise to define regions of interest. We introduce a computationally efficient, multistage machine learning strategy to identify chemically distinct domains in a semi automated way, and subsequently quantify their geometric and compositional characteristics. In our algorithmic pipeline, we first coarse grain the APT data into voxels, collect the composition statistics, and decompose it via clustering in composition space. The composition classification then enables the real space segmentation via a density based clustering algorithm, thus revealing the microstructure at voxel resolution. Our approach is demonstrated for a Sm(Co,Fe)ZrCu alloy. The alloy exhibits two precipitate phases with a plate-like, but intertwined morphology. The primary segmentation is further refined to disentangle these geometrically complex precipitates into individual plate like parts by an unsupervised approach based on principle component analysis, or a U-Net based semantic segmentation trained on the former. Following the chemical and geometric analysis, detailed chemical distribution and segregation effects relative to the predominant plate-like geometry can be readily mapped without resorting to the initial voxelization.

physics.chem-ph↗
arXiv2023

A versatile and reproducible cryo-sample preparation methodology for atom probe studies

Repeatable and reliable site-specific preparation of specimens for atom probe tomography (APT) at cryogenic temperatures has proven challenging. A generalized workflow is required for cryogenic-specimen preparation including lift-out via focused-ion beam and in-situ deposition of capping layers, to strengthen specimens that will be exposed to high electric field and stresses during field evaporation in APT, and protect them from environment during transfer into the atom probe. Here, we build on existing protocols, and showcase preparation and analysis of a variety of metals, oxides and supported frozen liquids and battery materials. We demonstrate reliable in-situ deposition of a metallic capping layer that significantly improve the atom probe data quality for challenging material systems, particularly battery cathode materials which are subjected to delithiation during the atom probe analysis itself. Our workflow designed is versatile and transferable widely to other instruments.

physics.app-ph↗
arXiv2023

Machine learning-enabled tomographic imaging of chemical short-range atomic ordering

In solids, chemical short-range order (CSRO) refers to the self-organisation of atoms of certain species occupying specific crystal sites. CSRO is increasingly being envisaged as a lever to tailor the mechanical and functional properties of materials. Yet quantitative relationships between properties and the morphology, number density, and atomic configurations of CSRO domains remain elusive. Herein, we showcase how machine learning-enhanced atom probe tomography (APT) can mine the near-atomically resolved APT data and jointly exploit the technique's high elemental sensitivity to provide a 3D quantitative analysis of CSRO in a CoCrNi medium-entropy alloy. We reveal multiple CSRO configurations, with their formation supported by state-of-the-art Monte-Carlo simulations. Quantitative analysis of these CSROs allows us to establish relationships between processing parameters and physical properties. The unambiguous characterization of CSRO will help refine strategies for designing advanced materials by manipulating atomic-scale architectures.

cond-mat.mtrl-sci↗
arXiv2023

Exploring the Surface Segregation of Rh Dopant in PtNi Nanoparticles through Atom Probe Tomography Analysis

Proton exchange membrane fuel cells hold promise as energy conversion devices for hydrogen-based power generation and storage. However, the slow kinetics of the oxygen reduction at the cathode imposes the need for highly active catalysts, typically Pt or Pt-based, with a large available area. The scarcity of Pt increases deployment and operational cost, driving the development of novel highly-active material systems. As an alternative, Rh-doped PtNi nanoparticle has been suggested as promising oxygen reduction catalyst, but the 3D distributions of constituent elements in the nanoparticles have remained unclear, making it difficult to guide property optimization. Here, a combination of advanced microscopy and microanalysis techniques is used to study the Rh distribution in the PtNi nanoparticles, and Rh surface segregation is revealed, even with an overall Rh content below 2 at. %. Our findings suggest that doping and surface chemistry must be carefully investigated to establish a clear link with catalytic activity can truly be established.

cond-mat.mtrl-sci↗
arXiv2023

Nanoscale perspective on the stress-corrosion cracking behavior of a peak-aged 7XXX-Al alloy

High strength 7xxx Al-alloys are currently commonly used in aerospace and are expected to be increasingly employed in the automotive sector for weight reduction purposes. These alloys can however be sensitive to stress-corrosion cracking (SCC) depending on temper and loading conditions. Both the alloy's grain structure and composition are believed to play a key role in determining sensitivity to SCC. Here, we study at the nanometer scale the evolution of the microstructure near stress corrosion cracks on two different model variants of the 7140 aluminum alloy. We performed double cantilever beam (DCB) crack growth tests in hot (70°C) humid air, on samples extracted at quarter-thickness (T/4) and mid-thickness (T/2) and heat treated to a non-industrial, SCC sensitive T6 condition. The sample at T/4 shows a lower KISCC along with flatter grains and a higher solute content, whereas both samples exhibit similar crack growth rates at higher stress intensities. We report on precipitate dissolution and matrix solute enrichment near the crack tips, with the T/4 position presenting the higher increase in solute levels. The near grain boundary microstructure ahead of the crack is modified, with evidence of precipitate dissolution and transport of solutes towards the stress-corrosion crack tip. These results agree with a recent report on another 7xxx Al-alloy after SCC in Cl-solution, supporting the possibility that these mechanisms are generally occurring. We relate our findings with the measured SCC behavior and provide an array of possible mechanisms that could be widely applicable in SCC of high strength Al-alloys.

cond-mat.mtrl-sci↗
arXiv2023

Effect of Pore Formation on Redox-Driven Phase Transformation

When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system. The redox product (water) accumulates inside the pores and shifts the local equilibrium at the already reduced material back towards re-oxidation into cubic-Fe1-xO (where x refers to Fe deficiency, space group Fm3-m). This effect helps to understand the sluggish reduction of cubic-Fe1-xO by hydrogen, a key process for future sustainable steelmaking.

cond-mat.mtrl-sci↗
arXiv2023

Revealing compositional evolution of PdAu electrocatalyst by atom probe tomography

Pd-based electro-catalysts are a key component to improve the methanol oxidation reaction (MOR) kinetics from alcohol fuel cells. However, the performance of such catalysts is degraded over time. To understand the microstructural/atomic scale chemical changes responsible for such effect, scanning (transmission) electron microscopies and atom probe tomography (APT) were performed after accelerated degradation tests (ADT). No morphological changes are observed after 1000 MOR cycles. Contrastingly, (1) Pd and B are leached from PdAu nanoparticles and (2) Au-rich regions are formed at the surface of the catalyst. These insights highlight the importance of understanding the chemical modification undergoing upon MOR to design superior catalysts.

cond-mat.mtrl-sci↗
arXiv2023

Atom probe analysis of BaTiO3 enabled by metallic shielding

Atom probe tomography has been raising in prominence as a microscopy and microanalysis technique to gain sub-nanoscale information from technologically-relevant materials. However, the analysis of some functional ceramics, particularly perovskites, has remained challenging with extremely low yield and success rate. This seems particularly problematic for materials with high piezoelectric activity, which may be difficult to express at the low temperatures necessary for satisfactory atom probe analysis. Here, we demonstrate the analysis of commercial BaTiO3 particles embedded in a metallic matrix. Density-functional theory shows that a metallic coating prevents charge penetration of the electrostatic field, and thereby suppresses the associated volume associated change linked to the piezoelectric effect.

cond-mat.mtrl-sci↗
arXiv2023

B dopant evolution in Pd catalysts after H evolution/oxidation reaction in alkaline environment

Introduction of interstitial dopants has opened a new pathway to optimize nanoparticle catalytic activity for, e.g., hydrogen evolution/oxidation and other reactions. Here, we discuss the stability of a property-enhancing dopant, B, introduced through controlled synthesis of an electrocatalyst Pd aerogel. We observe significant removal of B after the hydrogen evolution/oxidation reaction. Ab-initio calculations show that the high stability of sub-surface B in Pd is substantially reduced when H is ad/absorbed on the surface, favoring its departure from the host nanostructure. The destabilization of sub-surface B is more pronounced as more H occupies surface sites and empty interstitial sites. We hence demonstrate that the H2 fuel/product itself favors the microstructural degradation of the electrocatalyst and an associated drop in activity.

cond-mat.mtrl-sci↗
arXiv2023

Hydrogen embrittlement of twinning-induced plasticity steels: contribution of segregation to twin boundaries

Metallic materials, especially steel, underpin transportation technologies. High-manganese twinning induced plasticity (TWIP) austenitic steels exhibit exceptional strength and ductility from twins, low-energy microstructural defects that form during plastic loading. Their high-strength could help light-weighting vehicles, and hence cut carbon emissions. TWIP steels are however very sensitive to hydrogen embrittlement that causes dramatic losses of ductility and toughness leading to catastrophic failure of engineering parts. Here, we examine the atomic-scale chemistry and interaction of hydrogen with twin boundaries in a model TWIP steel by using isotope-labelled atom probe tomography, using tritium to avoid overlap with residual hydrogen. We reveal co-segregation of tritium and, unexpectedly, oxygen to coherent twin boundaries, and discuss their combined role in the embrittlement of these promising steels.

cond-mat.mtrl-sci↗
arXiv2023

Transmission Kikuchi diffraction mapping induces structural damage in atom probe specimens

Measuring local chemistry of specific crystallographic features by atom probe tomography (APT) is facilitated by using transmission Kikuchi diffraction (TKD) to help position them sufficiently close to the apex of the needle-shaped specimen. However, possible structural damage associated to the energetic electrons used to perform TKD is rarely considered and is hence not well-understood. Here, in two case studies, we evidence damage in APT specimens from TKD mapping. First, we analyze a solid solution, metastable \b{eta}-Ti-12Mo alloy, in which the Mo is expected to be homogenously distributed. Following TKD, APT reveals a planar segregation of Mo amongst other elements. Second, specimens were prepared near Σ3 twin boundaries in a high manganese twinning-induced plasticity steel, and subsequently charged with deuterium gas. Beyond a similar planar segregation, voids containing a high concentration of deuterium, i.e. bubbles, are detected in the specimen on which TKD was performed. Both examples showcase damage from TKD mapping leading to artefacts in the compositional distribution of solutes. We propose that the structural damage is created by surface species, including H and C, subjected to recoil from incoming energetic electrons during mapping, thereby getting implanted and causing cascades of structural damage in the sample.

cond-mat.mtrl-sci↗