arXiv subjects

Baptiste Gault

Publications and source records attributed to Baptiste Gault.

At least 109 records · Page 6Linked to original sources

arXiv2022

Atom probe analysis of battery materials: challenges and ways forward

The worldwide developments of electric vehicles, as well as large-scale or grid-scale energy storage to compensate the intermittent nature of renewable energy generation has generated a surge of interest in battery technology. Understanding the factors controlling battery capacity and, critically, their degradation mechanisms to ensure long-term, sustainable and safe operation requires detailed knowledge of their microstructure and chemistry, and their evolution under operating conditions, on the nanoscale. Atom probe tomography (APT) provides compositional mapping of materials in three-dimensions with sub-nanometre resolution, and is poised to play a key role in battery research. However, APT is underpinned by an intense electric-field that can drive lithium migration, and many battery materials are reactive oxides, requiring careful handling and sample transfer. Here, we report on the analysis of both anode and cathode materials, and show that electric-field driven migration can be suppressed by using shielding by embedding powder particles in a metallic matrix or by using a thin conducting surface layer. We demonstrate that for a typical cathode material, cryogenic specimen preparation and transport under ultra-high vacuum leads to major delithiation of the specimen during the analysis. In contrast, transport of specimens through air enables analysis of the material. Finally, we discuss the possible physical underpinnings and discuss ways forward to enable shield of the electric field, which helps address the challenges inherent to the APT analysis of battery materials.

cond-mat.mtrl-sci↗

arXiv2022

Hydrogen trapping and embrittlement in high-strength Al-alloys

Ever more stringent regulations on greenhouse gas emissions from transportation motivate efforts to revisit materials used for vehicles. High-strength Al-alloys often used in aircrafts could help reduce the weight of automobiles, but are susceptible to environmental degradation. Hydrogen (H) "embrittlement" is often pointed as the main culprit, however, the mechanisms underpinning failure are elusive: atomic-scale analysis of H inside an alloy remains a challenge, and this prevents deploying alloy design strategies to enhance the materials' durability. Here we successfully performed near-atomic scale analysis of H trapped in second-phase particles and at grain boundaries in a high-strength 7xxx Al-alloy. We used these observations to guide atomistic ab-initio calculations which show that the co-segregation of alloying elements and H favours grain boundary decohesion, while the strong partitioning of H into the second-phases removes solute H from the matrix, hence preventing H-embrittlement. Our insights further advance the mechanistic understanding of H-assisted embrittlement in Al-alloys, emphasizing the role of H-traps in retarding cracking and guiding new alloy design.

cond-mat.mtrl-sci↗

arXiv2022

The role of \b{eta} pockets resulting from Fe impurities in hydride formation in titanium

The corrosion potential of commercially pure titanium in NaCl solutions is dramatically affected by trace Fe additions, which cause the appearance of submicron pockets of \b{eta} phase at grain boundary triple points. Furthermore, the low solubility of hydrogen in hexagonal close-packed α-Ti makes titanium alloys prone to subsequent hydride-associated failures due to stress corrosion cracking. We analyzed α-α and α-\b{eta} sections of the abutting grain boundary of a \b{eta} pocket in a Grade 2 CP-Ti, and the α-\b{eta} phase boundary. Fe and H partition to \b{eta} and segregate at the grain boundary, but no segregation is seen at the α-\b{eta} phase boundary. In contrast, a significant Ni (>1 at%) accumulation is observed at the α-\b{eta} phase boundary. We propose that the \b{eta}-pockets act as hydrogen traps and facilitate the nucleation and growth of hydrides along grain boundaries in CP-Ti.

cond-mat.mtrl-sci↗

arXiv2021

A cracking oxygen story: a new view of stress corrosion cracking in titanium alloys

Titanium alloys can suffer from halide-associated stress corrosion cracking at elevated temperatures e.g., in jet engines, where chlorides and Ti-oxide promote the cracking of water vapour in the gas stream, depositing embrittling species at the crack tip. Here we report, using isotopically-labelled experiments, that crack tips in an industrial Ti-6Al-2Sn-4Zr-6Mo alloy are strongly enriched (>5 at.%) in oxygen from the water vapour, far greater than the amounts (0.25 at.%) required to embrittle the material. Surprisingly, relatively little hydrogen (deuterium) is measured, despite careful preparation and analysis. Therefore, we suggest that a combined effect of O and H leads to cracking, with O playing a vital role, since it is well-known to cause embrittlement of the alloy. In contrast it appears that in alpha+beta Ti alloys, it may be that H may drain away into the bulk owing to its high solubility in beta-Ti, rather than being retained in the stress field of the crack tip. Therefore, whilst hydrides may form on the fracture surface, hydrogen ingress might not be the only plausible mechanism of embrittlement of the underlying matrix. This possibility challenges decades of understanding of stress-corrosion cracking as being related solely to the hydrogen enhanced localised plasticity (HELP) mechanism, which explains why H-doped Ti alloys are embrittled. This would change the perspective on stress corrosion embrittlement away from a focus purely on hydrogen to also consider the ingress of O originating from the water vapour, insights critical for designing corrosion resistant materials.

cond-mat.mtrl-sci↗

arXiv2021

Understanding alkali contamination in colloidal nanomaterials to unlock grain boundary impurity engineering

Metal nano-aerogels combine a large surface area, a high structural stability, and a high catalytic activity towards a variety of chemical reactions. The performance of such nanostructures is underpinned by the atomic-level distribution of their constituents. Yet monitoring their sub-nanoscale structure and composition to guide property optimization remains extremely challenging. Here, we synthesized Pd nano-aerogels from a K2PdCl4 precursor and two different NaBH4 reductant concentrations in distilled water. Atom probe tomography reveals that the aerogel is poly-crystalline and that impurities (Na, K) are integrated from the solution into grain boundaries. Ab initio calculations indicate that these impurities preferentially bound to the Pd-metal surface and are ultimately found in grain boundaries forming as the particles coalesce during synthesis, with Na atoms thermodynamically equilibrating with the surrounding solution and K atoms remaining between growing grains. If controlled, impurity integration, i.e. grain boundary decoration, may offer opportunities for designing new nano-aerogels.

cond-mat.mtrl-sci↗

arXiv2021

Laser-equipped gas reaction chamber for probing environmentally sensitive materials at near atomic scale

Numerous metallurgical and materials science applications depend on quantitative atomic-scale characterizations of environmentally-sensitive materials and their transient states. Studying the effect upon materials subjected to thermochemical treatments in specific gaseous atmospheres is of central importance for specifically studying a material's resistance to certain oxidative or hydrogen environments. It is also important for investigating catalytic materials, direct reduction of an oxide, particular surface science reactions or nanoparticle fabrication routes. This manuscript realizes such experiments upon a thermochemical reaction chamber called the Reacthub and allows for transferring treated materials under cryogenic & ultrahigh vacuum workflow conditions for characterisation by either atom probe or scanning Xe+/electron microscopies. Two examples are discussed in the present study. One protocol was in the deuterium gas charging (25 kPa D2 at 200 °C) of a high-manganese twinning-induced-plasticity steel and characterization of the ingress and trapping of hydrogen at various features (grain boundaries in particular) in efforts to relate this to the steel's hydrogen embrittlement susceptibility. Deuterium was successfully detected after gas charging but most contrast originated from the complex ion FeOD+ signal and the feature may be an artefact. The second example considered the direct deuterium reduction (5 kPa D2 at 700 °C) of a single crystal wuestite sample, demonstrating that under a standard thermochemical treatment causes rapid reduction upon the nanoscale. Further studies are required for complete confidence about these phenomena, but these experiments successfully demonstrate that how an ex-situ thermochemical treatment can be realised that captures environmentally-sensitive transient states that can be analysed by atomic-scale by atom probe microscope.

cond-mat.mtrl-sci↗

arXiv2021

High diffusivity pathways govern massively enhanced oxidation during tribological sliding

The lifetime of moving metallic components is often limited by accelerated oxidation. Yet, the mechanisms and pathways for oxidation during tribological loading are not well understood. Using copper as a model system, tribologically-induced oxidation is systematically investigated by varying the sliding speed and test duration under mild tribological loading. We demonstrate that tribo-oxidation is controlled by test duration rather than the number of cycles or the sliding speed. Plastic deformation from tribological loading creates dislocations, grain and phase boundaries that act as high diffusivity pathways. A combination of electron microscopy and atom probe tomography revealed significantly enhanced atomic concentration of the diffusing species around dislocations. Oxygen diffusion into the bulk as well as of copper towards the free surface along these defects control the oxide formation kinetics. Our work paves the way for formulating a physics-based understanding for tribo-oxidation, which is crucial to develop strategies to prevent oxidation and to strategically tailor surfaces to increase the lifetime of engineering systems.

cond-mat.mtrl-sci↗

arXiv2021

Origins of the hydrogen signal in atom probe tomography

Atom Probe Tomography (APT) analysis is being actively used to provide near-atomic-scale information on the composition of complex materials in three-dimensions. In recent years, there has been a surge of interest in the technique to investigate the distribution of hydrogen in metals. However, the presence of hydrogen in the analysis of almost all specimens from nearly all material systems has caused numerous debates as to its origins and impact on the quantitativeness of the measurement. It is often perceived that most H arises from residual gas ionization, therefore affecting primarily materials with a relatively low evaporation field. In this work, we perform systematic investigations to identify the origin of H residuals in APT experiments by combining density-functional theory (DFT) calculations and APT measurements on an alkali and a noble metal, namely Na and Pt, respectively. We report that no H residual is found in Na metal samples, but in Pt, which has a higher evaporation field, a relatively high signal of H is detected. These results contradict the hypothesis of the H signal being due to direct ionization of residual H$_2$ without much interaction with the specimen's surface. Based on DFT, we demonstrate that alkali metals are thermodynamically less likely to be subject to H contamination under APT-operating conditions compared to transition or noble metals. These insights indicate that the detected H-signal is not only from ionization of residual gaseous H$_2$ alone, but is strongly influenced by material-specific physical properties. The origin of H residuals is elucidated by considering different conditions encountered during APT experiments, specifically, specimen-preparation, transportation, and APT-operating conditions by taking thermodynamic and kinetic aspects into account.

cond-mat.mtrl-sci↗

arXiv2021

Hydrogen and deuterium charging of site-specific specimen for atom probe tomography

Hydrogen embrittlement can cause a dramatic deterioration of the mechanical properties of high-strength metallic materials. Despite decades of experimental and modelling studies, the exact underlying mechanisms behind hydrogen embrittlement remain elusive. To unlock understanding of the mechanism and thereby help mitigate the influence of hydrogen and the associated embrittlement, it is essential to examine the interactions of hydrogen with structural defects such as grain boundaries, dislocations and stacking faults. Atom probe tomography (APT) can, in principle, analyse hydrogen located specifically at such microstructural features but faces strong challenges when it comes to charging specimens with hydrogen or deuterium. Here, we describe three different workflows enabling hydrogen/deuterium charging of site-specific APT specimens: namely cathodic, plasma and gas charging. We discuss in detail the caveats of the different approaches in order to help with future research efforts and facilitate further studies of hydrogen in metals. Our study demonstrates successful cathodic and gas charging, with the latter being more promising for the analysis of the high-strength steels at the core of our work.

cond-mat.mtrl-sci↗

arXiv2021

Nanoscale characterisation of hydrides and secondary phase particles in Zircaloy-4

The interaction of hydrogen and metals continues to be industrially relevant and is a critical part of creating and supporting a safety case for nuclear reactor operation. In the present work, we explore hydrogen storage and hydride formation in a zirconium alloy. We characterise the structure and interfaces of fine scale hydrides using scanning transmission electron microscopy (STEM) including energy dispersive spectroscopy (EDS/EDX), electron energy loss spectroscopy (EELS), and high-resolution STEM. Chemical characterisation is supported further with atom probe tomography (APT). Samples were prepared with cryo-focussed ion beam machining (cryo-FIB) and contain hydrides in α-Zr matrix and hydrides associated with one FeCrZr secondary phase particle (SPP). Major findings include characterisation of different interface planes based upon the size of the hydrides and chemical redistribution of solute ahead of the hydride-metal interface. We also find significant (up to 6 at%) hydrogen retained in solution within the zirconium matrix and show a hydride with only 17 at% hydrogen, which is well below that of a ξ-phase stoichiometry suggesting it is an embryonic hydride. These findings help us understand the distribution of hydrogen and the nanoscale morphology of hydrides, which may influence the lifetime of zirconium-based nuclear fuel cladding.

cond-mat.mtrl-sci↗

arXiv2021

Reflections on the spatial performance of atom probe tomography in the analysis of atomic neighbourhoods

Atom probe tomography is often introduced as providing "atomic-scale" mapping of the composition of materials and as such is often exploited to analyse atomic neighbourhoods within a material. Yet quantifying the actual spatial performance of the technique in a general case remains challenging, as they depend on the material system being investigated as well as on the specimen's geometry. Here, by using comparisons with field-ion microscopy experiments and field-ion imaging and field evaporation simulations, we provide the basis for a critical reflection on the spatial performance of atom probe tomography in the analysis of pure metals, low alloyed systems and concentrated solid solutions (i.e. akin to high-entropy alloys). The spatial resolution imposes strong limitations on the possible interpretation of measured atomic neighbourhoods, and directional neighbourhood analyses restricted to the depth are expected to be more robust. We hope this work gets the community to reflect on its practices, in the same way, it got us to reflect on our work.

cond-mat.mtrl-sci↗

arXiv2021

Discovery and implications of hidden atomic-scale structure in a metallic meteorite

Iron and its alloys have made modern civilisation possible, with metallic meteorites providing one of the human's earliest sources of usable iron as well as providing a window into our solar system's billion-year history. Here highest-resolution tools reveal the existence of a previously hidden FeNi nanophase within the extremely slowly cooled metallic meteorite NWA 6259. This new nanophase exists alongside Ni-poor and Ni-rich nanoprecipitates within a matrix of tetrataenite, the uniaxial, chemically ordered form of FeNi. The ferromagnetic nature of the nanoprecipitates combined with the antiferromagnetic character of the FeNi nanophases give rise to a complex magnetic state that evolves dramatically with temperature. These observations extend and possibly alter our understanding of celestial metallurgy, provide new knowledge concerning the archetypal Fe-Ni phase diagram and supply new information for the development of new types of sustainable, technologically critical high-energy magnets.

cond-mat.mtrl-sci↗

arXiv2021

Microstructure manipulation by laser-surface remelting of a full-Heusler compound to enhance thermoelectric properties

There is an increasing reckoning that the thermoelectric performance of a material is dependent on its microstructure. However, the microstructure-properties relationship often remains elusive, in part due to the complexity of the hierarchy and scales of features that influence transport properties. Here, we focus on the promising Heusler-Fe2VAl compound. We directly correlate microstructure and local properties, using advanced scanning electron microscopy methods including in-situ four-point-probe technique for electron transport measurements. The local thermal conductivity is investigated by scanning thermal microscopy. Finally, atom probe tomography provides near-atomic scale compositional analysis. To locally manipulate the microstructure, we use laser surface remelting. The rapid quenching creates a complex microstructure with a high density of dislocations and small, elongated grains. We hence showcase that laser surface remelting can be employed to manipulate the microstructure to reduce the thermal conductivity and electrical resistivity, leading to a demonstrated enhancement of the thermoelectric performance at room temperature.

cond-mat.mtrl-sci↗

arXiv2021

Dopant-segregation to grain boundaries controls electrical conductivity of n-type NbCo(Pt)Sn half-Heusler alloy mediating thermoelectric performance

Science-driven design of future thermoelectric materials requires a deep understanding of the fundamental relationships between microstructure and transport properties. Grain boundaries in polycrystalline materials influence the thermoelectric performance through the scattering of phonons or the trapping of electrons due to space-charge effects. Yet, the current lack of careful investigations on grain boundary-associated features hinders further optimization of properties. Here, we study n-type NbCo1-xPtxSn half-Heusler alloys, which were synthesized by ball milling and spark plasma sintering (SPS). Post-SPS annealing was performed on one sample, leading to improved low-temperature electrical conductivity. The microstructure of both samples was examined by electron microscopy and atom probe tomography. The grain size increases from ~230 nm to ~2.38 μm upon annealing. Pt is found within grains and at grain boundaries, where it locally reduces the resistivity, as assessed by in situ four-point-probe electrical conductivity measurement. Our work showcases the correlation between microstructure and electrical conductivity, providing opportunities for future microstructural optimization by tuning the chemical composition at grain boundaries.

cond-mat.mtrl-sci↗

arXiv2021

Revealing in-plane grain boundary composition features through machine learning from atom probe tomography data

Grain boundaries (GBs) are planar lattice defects that govern the properties of many types of polycrystalline materials. Hence, their structures have been investigated in great detail. However, much less is known about their chemical features, owing to the experimental difficulties to probe these features at the atomic length scale inside bulk material specimens. Atom probe tomography (APT) is a tool capable of accomplishing this task, with an ability to quantify chemical characteristics at near-atomic scale. Using APT data sets, we present here a machine-learning-based approach for the automated quantification of chemical features of GBs. We trained a convolutional neural network (CNN) using twenty thousand synthesized images of grain interiors, GBs, or triple junctions. Such a trained CNN automatically detects the locations of GBs from APT data. Those GBs are then subjected to compositional mapping and analysis, including revealing their in-plane chemical decoration patterns. We applied this approach to experimentally obtained APT data sets pertaining to three case studies, namely, Ni-P, Pt-Au, and Al-Zn-Mg-Cu alloys. In the first case, we extracted GB-specific segregation features as a function of misorientation and coincidence site lattice character. Secondly, we revealed interfacial excesses and in-plane chemical features that could not have been found by standard compositional analyses. Lastly, we tracked the temporal evolution of chemical decoration from early-stage solute GB segregation in the dilute limit to interfacial phase separation, characterized by the evolution of complex composition patterns. This machine-learning-based approach provides quantitative, unbiased, and automated access to GB chemical analyses, serving as an enabling tool for new discoveries related to interface thermodynamics, kinetics, and the associated chemistry-structure-property relations.

cond-mat.mtrl-sci↗

arXiv2021

Revealing atomic-scale vacancy-solute interaction in nickel

Imaging individual vacancies in solids and revealing their interactions with solute atoms remains one of the frontiers in microscopy and microanalysis. Here we study a creep-deformed binary Ni-2 at.% Ta alloy. Atom probe tomography reveals a random distribution of Ta. Field ion microscopy, with contrast interpretation supported by density-functional theory and time-of-flight mass spectrometry, evidences a positive correlation of tantalum with vacancies. Our results support solute-vacancy binding, which explains improvement in creep resistance of Ta-containing Ni-based superalloys and helps guide future material design strategies.

cond-mat.mtrl-sci↗

arXiv2021

Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy

A systematic study of the compression creep properties of a single-crystalline Co-base superalloy (Co-9Al-7.5W-2Ta) was conducted at 950 °C, 975 °C and 1000 °C to reveal the influence of temperature and the resulting diffusion velocity of solutes like Al, W and Ta on the deformation mechanisms. Two creep rate minima are observed at all temperatures indicating that the deformation mechanisms causing these minima are quite similar. Atom-probe tomography analysis reveals elemental segregation to stacking faults, which had formed in the $γ\prime$ phase during creep. Density-functional-theory calculations indicate segregation of W and Ta to the stacking fault and an associated considerable reduction of the stacking fault energy. Since solutes diffuse faster at a higher temperature, segregation can take place more quickly. This results in a significantly faster softening of the alloy, since cutting of the $γ\prime$ precipitate phase by partial dislocations is facilitated through segregation already during the early stages of creep. This is confirmed by transmission electron microscopy analysis. Therefore, not only the smaller precipitate fraction at higher temperatures is responsible for the worse creep properties, but also faster diffusion-assisted shearing of the $γ\prime$ phase by partial dislocations. The understanding of these mechanisms will help in future alloy development by offering new design criteria.

cond-mat.mtrl-sci↗

arXiv2021

Effect of Cd diffusion on the electrical properties of the Cu(In,Ga)Se2 thin-film solar cell

Cu(In,Ga)Se2 (CIGSe)-based solar cells are promising candidates for efficient sunlight harvesting. However, their complex composition and microstructure can change under operation conditions, for instance heating from sun light illumination can lead to a degradation in performance. Here, we investigate the thermally-induced degradation processes in a set of CIGSe-based solar cells that were annealed at temperatures between 150C and 300C. Using correlative atom probe tomography (APT)/transmission electron microscope (TEM), we found that the buffer-absorber interface is not sharp but consists of an interfacial zone (2 - 6.5 nm wide) where a gradient of constituent elements belonging to the CdS buffer and CIGSe absorber appears. An enhanced short-range Cd in-diffusion inside the CIGSe was observed whenever a low Ga/(Ga+In) ratio occurred at the interface. This might indicate the presence of Ga vacancies as a channeling defect for Cd in-diffusion inside the CIGSe layer leading to a buried pn-homojunction. We evidence that a considerable amount of Cd is found inside the CIGSe layer at annealing temperatures higher than 150C. Further investigations of the elemental redistribution inside the CIGSe layer combined with C-V measurements support the formation of CdCu donor like defects deep inside the p-type CIGSe which lead to a strong compensation of the CIGSe layer and hence to strong deterioration of cell efficiency at annealing temperatures higher than 200C. Hence, understanding the degradation processes in Cu(In,Ga)Se2 (CIGSe)-based solar cells opens new opportunities for further improvement of the long-term device performance.

physics.app-ph↗