Searcharxiv⌕ Search

arXiv subjects

Barnaby Norris

Publications and source records attributed to Barnaby Norris.

At least 37 records · Page 2Linked to original sources
arXiv2024

Spectral interferometric wavefront sensing: a solution for petalometry at Subaru/SCExAO

The petaling effect, induced by pupil fragmentation from the telescope spider, drastically affects the performance of high contrast instruments by inducing core splitting on the PSF. Differential piston/tip/tilt aberrations within each optically separated fragment of the pupil are poorly measured by commonly used Adaptive Optics (AO) systems. We here pursue a design of dedicated low-order wavefront sensor -- or petalometers -- to complement the main AO. Interferometric devices sense differential aberrations between fragments with optimal sensitivity; their weakness though is their limitation to wrapped phase measurements. We show that by combining multiple spectral channels, we increase the capture range for petaling aberrations beyond several microns, enough to disambiguate one-wave wrapping errors made by the main AO system. We propose here to implement a petalometer from the multi-wavelength imaging mode of the VAMPIRES visible-light instrument, deployed on SCExAO at the Subaru Telescope. The interferometric measurements obtained in four spectral channels through a 7 hole non-redundant mask allow us to effiiently reconstruct diffierential piston between pupil petals.

astro-ph.IM↗
arXiv2024

Astrophotonics -- current capabilities and the road ahead

Astrophotonics represents a cutting-edge approach in observational astronomy. This paper explores the significant advancements and potential applications of astrophotonics, highlighting how photonic technologies stand to revolutionise astronomical instrumentation. Key areas of focus include photonic wavefront sensing and imaging, photonic interferometry and nulling, advanced chip fabrication methods, and the integration of spectroscopy and sensing onto photonic chips. The role of single-mode fibres in reducing modal noise, and the development of photonic integral field units (IFUs) and arrayed waveguide gratings (AWGs) for high-resolution, spatially resolved spectroscopy will be examined. As part of the Sydney regional-focus issue, this review aims to detail some of the current technological achievements in this field as well as to discuss the future trajectory of astrophotonics, underscoring its potential to unlock important new astronomical discoveries.

astro-ph.IM↗
arXiv2024

The GLINT nulling interferometer: improving nulls for high-contrast imaging

GLINT is a nulling interferometer downstream of the SCExAO extreme-adaptive-optics system at the Subaru Telescope (Hawaii, USA), and is a pathfinder instrument for high-contrast imaging of circumstellar environments with photonic technologies. GLINT is effectively a testbed for more stable, compact, and modular instruments for the era of 30m-class telescopes. GLINT is now undergoing an upgrade with a new photonic chip for more achromatic nulls, and for phase information to enable fringe tracking. Here we provide an overview of the motivations for the GLINT project and report on the design of the new chip, the on-site installation, and current status.

astro-ph.IM↗
arXiv2024

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

A Photonic Lantern (PL) is a novel device that efficiently converts a multi-mode fiber into several single-mode fibers. When coupled with an extreme adaptive optics (ExAO) system and a spectrograph, PLs enable high throughput spectroscopy at high angular resolution. The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system of the Subaru Telescope recently acquired a PL that converts its multi-mode input into 19 single-mode outputs. The single mode outputs feed a R~4,000 spectrograph optimized for the 600 to 760 nm wavelength range. We present here the integration of the PL on SCExAO, and study the device performance in terms of throughput, field of view, and spectral reconstruction. We also present the first on-sky demonstration of a Visible PL coupled with an ExAO system, showing a significant improvement of x12 in throughput compared to the use of a sole single-mode fiber. This work paves the way towards future high throughput photonics instrumentation at small angular resolution.

astro-ph.IM↗
arXiv2024

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.

astro-ph.IM↗
arXiv2024

Generic data reduction for nulling interferometry package: the grip of a single data reduction package on all the nulling interferometers

Nulling interferometry is a powerful observing technique to reach exoplanets and circumstellar dust at separations too small for direct imaging with single-dish telescopes and too large for indirect methods. With near-future instrumentation, it bears the potential to detect young, hot planets near the snow lines of their host stars. A future space mission could detect and characterize a large number of rocky, habitable-zone planets around nearby stars at thermal-infrared wavelengths. The null self-calibration is a method aiming at modelling the statistical distribution of the nulled signal. It has proven to be more sensitive and accurate than average-based data reduction methods in nulling interferometry. This statistical approach opens the possibility of designing a GPU-based Python package to reduce the data from any of these instruments, by simply providing the data and a simulator of the instrument. GRIP is a toolbox to reduce nulling and interferometric data based on the statistical self-calibration method. In this article, we present the main features of GRIP as well as applications on real data.

astro-ph.IM↗
arXiv2024

Searching for Protoplanets around MWC 758 and MWC 480 in Br-$γ$ using Kernel Phase and SCExAO/CHARIS

Discovering new actively-accreting protoplanets is crucial to answering open questions about planet formation. However, identifying such planets at orbital distances where they are expected to be abundant is extremely challenging, both due to the technical requirements and large distances to star-forming regions. Here we use the kernel phase interferometry (KPI) technique to search for companions around the $\sim$6 and $\sim$8 Myr old Herbig Ae stars MWC 758 and MWC 480. KPI is a data analysis technique which is sensitive to moderate asymmetries, arising from eg. a circumstellar disk or companions with contrasts of up to 6-8 mags, at separations down to and even below the classical Rayleigh diffraction limit ($\sim 1.2λ/ D$). Using the high spectral resolution K-band mode of the SCExAO/CHARIS integral field spectrograph, we search for both excess Br-$γ$ line emission and continuum emission from companions around MWC 480 and MWC 758. We are able to set limits on the presence of rapidly accreting protoplanets and brown dwarfs between 4 and 16 au, well interior to those of previous studies. In Br-$γ$, we set limits on excess line emission equivalent to accretion rates ranging from $10^{-5} M_{j}^{2}.yr^{-1}$ to $10^{-6}M_{j}^{2}.yr^{-1}$. Our achievable contrasts demonstrate that KPI using SCExAO/CHARIS is a promising technique to search for giant accreting protoplanets at smaller separations compared to conventional imaging.

astro-ph.EP↗
arXiv2024

Laboratory demonstration of a Photonic Lantern Nuller in monochromatic and broadband light

Photonic lantern nulling (PLN) is a method for enabling the detection and characterization of close-in exoplanets by exploiting the symmetries of the ports of a mode-selective photonic lantern (MSPL) to cancel out starlight. A six-port MSPL provides four ports where on-axis starlight is suppressed, while off-axis planet light is coupled with efficiencies that vary as a function of the planet's spatial position. We characterize the properties of a six-port MSPL in the laboratory and perform the first testbed demonstration of the PLN in monochromatic light (1569 nm) and in broadband light (1450 nm to 1625 nm), each using two orthogonal polarizations. We compare the measured spatial throughput maps with those predicted by simulations using the lantern's modes. We find that the morphologies of the measured throughput maps are reproduced by the simulations, though the real lantern is lossy and has lower throughputs overall. The measured ratios of on-axis stellar leakage to peak off-axis throughput are around 10^(-2), likely limited by testbed wavefront errors. These null-depths are already sufficient for observing young gas giants at the diffraction limit using ground-based observatories. Future work includes using wavefront control to further improve the nulls, as well as testing and validating the PLN on-sky.

astro-ph.IM↗
arXiv2024

Testing magnetospheric accretion as an H$α$ emission mechanism of embedded giant planets: The case study for the disk exhibiting meridional flow around HD 163296

Recent high-sensitivity observations reveal that accreting giant planets embedded in their parental circumstellar disks can emit H$α$ at their final formation stages. While the origin of such emission is not determined yet, magnetospheric accretion is currently a most plausible hypothesis. In order to test this hypothesis further, we develop a simplified, but physical-based model and apply it to our observations taken toward HD 163296 with Subaru/SCExAO+VAMPIRES. We specify under what conditions, embedded giant planets can undergo magnetospheric accretion and emit hydrogen lines. We find that when stellar accretion rates are high, magnetospheric accretion becomes energetic enough to self-regulate the resulting emission. On the other hand, if massive planets are embedded in disks with low accretion rates, earlier formation histories determine whether magnetospheric accretion occurs. We explore two different origins of hydrogen emission lines (magnetospheric accretion flow heated by accretion-related processes vs planetary surfaces via accretion shock). The corresponding relationships between the accretion and line luminosities dictate that emission from accretion flow achieves higher line flux than that from accretion shock and the flux decreases with increasing wavelengths (i.e., from H$α$ to Pa$β$ and up to Br$γ$). Our observations do not detect any point-like source emitting H$α$ and are used to derive the 5$σ$ detection limit. The observations are therefore not sensitive enough, and reliable examination of our model becomes possible if observational sensitivity will be improved by a factor of ten or more. Multi-band observations increase the possibility of efficiently detecting embedded giant planets and carefully determining the origin of hydrogen emission lines.

astro-ph.EP↗
arXiv2023

Real-time experimental demonstrations of a photonic lantern wavefront sensor

The direct imaging of an Earth-like exoplanet will require sub-nanometric wavefront control across large light-collecting apertures, to reject host starlight and detect the faint planetary signal. Current adaptive optics (AO) systems, which use wavefront sensors that reimage the telescope pupil, face two challenges that prevent this level of control: non-common-path aberrations (NCPAs), caused by differences between the sensing and science arms of the instrument; and petaling modes: discontinuous phase aberrations caused by pupil fragmentation, especially relevant for the upcoming 30-m class telescopes. Such aberrations drastically impact the capabilities of high-contrast instruments. To address these issues, we can add a second-stage wavefront sensor to the science focal plane. One promising architecture uses the photonic lantern (PL): a waveguide that efficiently couples aberrated light into single-mode fibers (SMFs). In turn, SMF-confined light can be stably injected into high-resolution spectrographs, enabling direct exoplanet characterization and precision radial velocity measurements; simultaneously, the PL can be used for focal-plane wavefront sensing. We present a real-time experimental demonstration of the PL wavefront sensor on the Subaru/SCExAO testbed. Our system is stable out to around ~400 nm of low-order Zernike wavefront error, and can correct petaling modes. When injecting ~30 nm RMS of low order time-varying error, we achieve ~10x rejection at 1 s timescales; further refinements to the control law and lantern fabrication process should make sub-nanometric wavefront control possible. In the future, novel sensors like the PLWFS may prove to be critical in resolving the wavefront control challenges posed by exoplanet direct imaging.

astro-ph.IM↗
arXiv2023

Spectroastrometry and Imaging Science with Photonic Lanterns on Extremely Large Telescopes

Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs or photonic chip beam combiners. For instance, by using relative intensities in the output cores as a function of wavelength, PLs can enable spectroastrometry. In addition, by interfering beams in the output cores with a beam combiner in the backend, PLs can be used for high-throughput interferometric imaging. When used on an Extremely Large Telescope (ELT), with its increased sensitivity and angular resolution, the imaging and spectroastrometric capabilities of PLs will be extended to higher contrast and smaller angular scales. We study the potential spectroastrometry and imaging science cases of PLs on ELTs, including study of exomoons, broad-line regions of quasars, and inner circumstellar disks.

astro-ph.IM↗
arXiv2023

Demonstration of a photonic lantern focal-plane wavefront sensor: measurement of atmospheric wavefront error modes and low wind effect in the non-linear regime

Here we present a laboratory analysis of the use of a 19-core photonic lantern (PL) in combination with neural network (NN) algorithms as an efficient focal plane wavefront sensor (FP-WFS) for adaptive optics (AO), measuring wavefront errors such as low wind effect (LWE), Zernike modes and Kolmogorov phase maps. The aberrated wavefronts were experimentally simulated using a Spatial Light Modulator (SLM) with combinations of different phase maps in both the linear regime (average incident RMS wavefront error (WFE) of 0.88 rad) and in the non-linear regime (average incident RMS WFE of 1.5 rad). Results were analysed using a NN to determine the transfer function of the relationship between the incident wavefront error (WFE) at the input modes at the multimode input of the PL and the intensity distribution output at the multicore fibre outputs end of the PL. The root mean square error (RMSE) of the reconstruction of petal and LWE modes were just $2.87\times10^{-2}$ rad and $2.07\times10^{-1}$ rad respectively, in the non-linear regime. The reconstruction RMSE for Zernike combinations ranged from $5.67\times10^{-2}$ rad to $8.43\times10^{-1}$ rad, depending on the number of Zernike terms and incident RMS WFE employed. These results demonstrate the promising potential of PLs as an innovative FP-WFS in conjunction with NNs.

physics.optics↗
arXiv2023

Focal-plane wavefront sensing with photonic lanterns II: numerical characterization and optimization

We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact of beam-shaping optics and a charge-1 vortex mask, placed in the pupil plane. The former is motivated by the application of PLs to high-resolution spectroscopy, which could enable efficient injection into the spectrometer along with simultaneous focal-plane wavefront sensing; similarly, the latter is motivated by the application of PLs to vortex fiber nulling (VFN), which can simultaneously enable wavefront sensing and the nulling of on-axis starlight. Overall, we find that the PLWFS setups tested in this work exhibit good linearity out to ~0.25-0.5 radians of RMS wavefront error (WFE). Meanwhile, we estimate the maximum amount of WFE that can be handled by these sensors, before the sensor response becomes degenerate, to be around ~1-2 radians RMS. In the future, we expect these limits can be pushed further by increasing the number of degrees of freedom, either by adopting higher-mode-count lanterns, dispersing lantern outputs, or separating polarizations. Lastly, we consider optimization strategies for the design of the PLWFS, which involve both modification of the lantern itself and the use of pre- and post-lantern optics like phase masks and interferometric beam recombiners.

astro-ph.IM↗
arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗
arXiv2023

The path to detecting extraterrestrial life with astrophotonics

Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a gaping void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life.

astro-ph.IM↗
arXiv2023

Photonic spectro-interferometry with SCExAO/FIRST at the Subaru Telescope: towards H-alpha imaging of protoplanets

FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solution for enabling exoplanet detection and characterization in the future. We present the latest on-sky results along with recent upgrades, including the integration and on-sky test of a new spectrograph (R~3,600) optimized for the detection of H-alpha emission from young exoplanets accreting matter.

astro-ph.IM↗
arXiv2023

Spectrally dispersed kernel phase interferometry with SCExAO/CHARIS: proof of concept and calibration strategies

Kernel phase interferometry (KPI) is a data processing technique that allows for the detection of asymmetries (such as companions or disks) in high-Strehl images, close to and within the classical diffraction limit. We show that KPI can successfully be applied to hyperspectral image cubes generated from integral field spectrographs (IFSs). We demonstrate this technique of spectrally-dispersed kernel phase by recovering a known binary with the SCExAO/CHARIS IFS in high-resolution K-band mode. We also explore a spectral differential imaging (SDI) calibration strategy that takes advantage of the information available in images from multiple wavelength bins. Such calibrations have the potential to mitigate high-order, residual systematic kernel phase errors, which currently limit the achievable contrast of KPI. The SDI calibration presented here is applicable to searches for line emission or sharp absorption features, and is a promising avenue toward achieving photon-noise-limited kernel phase observations. The high angular resolution and spectral coverage provided by dispersed kernel phase offers novel opportunities for science observations which would have been challenging to achieve otherwise.

astro-ph.IM↗
arXiv2023

High-angular resolution and high-contrast VLTI observations from Y to L band with the Asgard instrumental suite

The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. Here, we introduce a new concept for the VLTI, Asgard: an instrumental suite comprised of four natively collaborating instruments: BIFROST, a combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; NOTT, a nulling interferometer dedicated to imaging young nearby planetary systems in the L band; HEIMDALLR, an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a Strehl optimiser. These instruments share common goals and technologies. The goals are diverse astrophysical cases such as the study of the formation and evolution processes of binary systems, exoplanetary systems and protoplanetary disks, the characterization of orbital parameters and spin-orbit alignment of multiple systems, the characterization of the exoplanets, and the study of exozodiacal disks. Thus, the idea of this suite is to make the instruments interoperable and complementary to deliver unprecedented sensitivity and accuracy from the J to M bands to meet these goals. The interoperability of the Asgard instruments and their integration in the VLTI are major challenges for this project.

astro-ph.IM↗