SearcharxivSearch

arXiv subjects

Bei-Bei Li

Publications and source records attributed to Bei-Bei Li.

At least 19 recordsLinked to original sources

Program gain and loss for broadband soliton microcombs

Soliton microcombs provide compact, broadband, coherent light sources for precision metrology, spectroscopy, communications, and microwave photonics. Extending their spectral span while retaining useful output power remains challenging and often requires impractically high pump power. Existing approaches mainly tailor the dispersion and pumping conditions, but they do not exploit the coupling spectrum as a programmable aspect of soliton operation. Here we introduce a meta-coupler whose lithographically programmed coupling spectrum concentrates strong pump access near the pumped resonance while leaving most comb lines close to the intrinsic loss rate. Si$_3$N$_4$ microresonators incorporating a meta-coupler exhibit broader circulating soliton spectra, nearly twofold larger 3 dB soliton bandwidths, up to about 12 dB higher central comb-line power, and up to about fivefold greater emitted comb power, without an additional pump-power penalty. Our work unlocks gain and loss as simultaneous programmable knobs for realizing high-performance soliton microcombs.

physics.optics

Perfect continuous-variable quantum microcombs

Quantum microcombs generated in high-Q microresonators provide compact, multiplexed sources of entangled modes for continuous-variable (CV) quantum information processing. While deterministic generation of CV states via Kerr-induced two-mode squeezing has been demonstrated, achieving spectrally uniform squeezing remains challenging because of asymmetry and anomalies in the dispersion profile. Here we overcome these limitations by combining a microresonator with an engineered mode spectrum and optimized pump conditions. We realize a CV quantum microcomb comprising 14 independent two-mode squeezed states, each exhibiting more than 4 dB of raw squeezing (up to 4.3 dB) across a 0.7 THz bandwidth. This uniform, high-performance quantum resource represents a key step toward scalable, integrated CV quantum technologies operating beyond classical limits.

quant-ph

Integrated soliton microcombs beyond the turnkey limit

Soliton microcombs generated in optical microresonators are accelerating the transition of optical frequency combs from laboratory instruments to industrial platforms. Self injection locking (SIL) enables direct driving of soliton microcombs by integrated lasers, providing turnkey initiation and improved coherence, but it also pins the pump close to resonance, limiting both spectral span and tuning flexibility. Here we theoretically and experimentally demonstrate that introducing a thermally tunable auxiliary microresonator extends the bandwidth of SIL soliton microcombs. By engineering hybridization of the pumped resonance, we achieve deterministic access to single soliton states and then push operation into a far detuned regime inaccessible to direct initiation. The resulting combs reach a near 200 nm span at a 25 GHz repetition rate, while preserving the SIL-enabled noise suppression throughout. Moreover, the added degree of freedom afforded by the coupled resonator architecture enables orthogonal control of the comb's repetition rate and center frequency. These advances expand the spectral reach and controllability of integrated soliton microcombs for information processing and precision metrology.

physics.optics

Integrated optomechanical ultrasonic sensors with nano-Pascal-level sensitivity

Ultrasonic sensors are widely used for object detection and localization in underwater and biological settings. The operational range and spatial resolution are inherently limited by sensor sensitivity, in which conventional piezoelectric transducers have been overwhelmed by advanced photonic sensors. Here, we demonstrate an optomechanical ultrasonic sensor integrated into a photonic platform, which comprises a suspended SiO2 membrane embedded with a high-Q Si3N4 microring resonator. By exploiting simultaneous optical and mechanical resonances, the sensor achieves a record low noise-equivalent pressure (NEP) of 218 nPa/Hz^1/2 at 289 kHz in air and 9.6 nPa/Hz^1/2 at 52 kHz in water. We demonstrate its versatility through photoacoustic gas spectroscopy in air and underwater ultrasound imaging, achieving a minimum detectable C2H2 concentration of 2.9 ppm (integration time 1 s) and an imaging resolution of 1.89 mm, respectively. Our work represents a significant advancement in compact CMOS-compatible ultrasound sensing, unlocking new possibilities in biomedical imaging, environmental monitoring, industrial testing, and underwater communications.

physics.optics

Power-efficient ultra-broadband soliton microcombs in resonantly-coupled microresonators

The drive to miniaturize optical frequency combs for practical deployment has spotlighted microresonator solitons as a promising chip-scale candidate. However, these soliton microcombs could be very power-hungry when their span increases, especially with fine comb spacings. As a result, realizing an octave-spanning comb at microwave repetition rates for direct optical-microwave linkage is considered not possible for photonic integration due to the high power requirements. Here, we introduce the concept of resonant-coupling to soliton microcombs to reduce pump consumption significantly. Compared to conventional waveguide-coupled designs, we demonstrate (i) a threefold increase in spectral span for high-power combs and (ii) up to a tenfold reduction in repetition frequency for octave-spanning operation. This configuration is compatible with laser integration and yields reliable, turnkey soliton generation. By eliminating the long-standing pump-power bottleneck, microcombs will soon become readily available for portable optical clocks, massively parallel data links, and field-deployable spectrometers.

physics.optics

Compact Turnkey Soliton Microcombs at Microwave Rates via Wafer-Scale Fabrication

Soliton microcombs generated in nonlinear microresonators facilitate the photonic integration of timing, frequency synthesis, and astronomical calibration functionalities. For these applications, low-repetition-rate soliton microcombs are essential as they establish a coherent link between optical and microwave signals. However, the required pump power typically scales with the inverse of the repetition rate, and the device footprint scales with the inverse of square of the repetition rate, rendering low-repetition-rate soliton microcombs challenging to integrate within photonic circuits. This study designs and fabricates silicon nitride microresonators on 4-inch wafers with highly compact form factors. The resonator geometries are engineered from ring to finger and spiral shapes to enhance integration density while attaining quality factors over 10^7. Driven directly by an integrated laser, soliton microcombs with repetition rates below 10 GHz are demonstrated via turnkey initiation. The phase noise performance of the synthesized microwave signals reaches -130 dBc/Hz at 100 kHz offset frequency for 10 GHz carrier frequencies. This work enables the high-density integration of soliton microcombs for chip-based microwave photonics and spectroscopy applications.

physics.optics

Large-scale cluster quantum microcombs

An optical frequency comb comprises a cluster of equally spaced, phase-locked spectral lines. Replacing these classical components with correlated quantum light gives rise to cluster quantum frequency combs, providing abundant quantum resources for measurement-based quantum computation and multi-user quantum networks. We propose and generate cluster quantum microcombs within an on-chip optical microresonator driven by multi-frequency lasers. Through resonantly enhanced four-wave mixing processes, continuous-variable cluster states with 60 qumodes are deterministically created. The graph structures can be programmed into one- and two-dimensional lattices by adjusting the configurations of the pump lines, which are confirmed inseparable based on the measured covariance matrices. Our work demonstrates the largest-scale cluster states with unprecedented raw squeezing levels from a photonic chip, offering a compact and scalable platform for computational and communicational tasks with quantum advantages.

physics.optics

Picotesla-sensitivity microcavity optomechanical magnetometry

Cavity optomechanical systems have enabled precision sensing of magnetic fields, by leveraging the optical resonance-enhanced readout and mechanical resonance-enhanced response. Previous studies have successfully achieved scalable and reproducible microcavity optomechanical magnetometry (MCOM) by incorporating Terfenol-D thin films into high-quality ($Q$) factor whispering gallery mode (WGM) microcavities. However, the sensitivity was limited to 585 pT/Hz$^{1/2}$, over 20 times inferior to those using Terfenol-D particles. In this work, we propose and demonstrate a high-sensitivity and scalable MCOM approach by sputtering a FeGaB thin film onto a high-$Q$ SiO$_2$ WGM microdisk. Theoretical studies are conducted to explore the magnetic actuation constant and noise-limited sensitivity by varying the parameters of the FeGaB film and SiO$_2$ microdisk. Multiple magnetometers with different radii are fabricated and characterized. By utilizing a microdisk with a radius of 355 $μ$m and a thickness of 1 $μ$m, along with a FeGaB film with a radius of 330 $μ$m and a thickness of 1.3 $μ$m, we have achieved a remarkable peak sensitivity of 1.68 pT/Hz$^{1/2}$ at 9.52 MHz. This represents a significant improvement of over two orders of magnitude compared with previous studies employing sputtered Terfenol-D film. Notably, the magnetometer operates without a bias magnetic field, thanks to the remarkable soft magnetic properties of the FeGaB film. Furthermore, as a proof-of-concept, we have demonstrated the real-time measurement of a pulsed magnetic field simulating the corona current in a high-voltage transmission line using our developed magnetometer. These high-sensitivity magnetometers hold great potential for various applications, such as magnetic induction tomography and corona current monitoring.

physics.optics

Ultrasound sensing with optical microcavities

Nowadays, ultrasound sensors are playing an irreplaceable role in the fields of biomedical imaging and industrial nondestructive inspection. Currently, piezoelectric transducers are the most widely used ultrasound sensors, but their sensitivities drop quickly when the size becomes smaller, leading to a typical sensor size at the millimeter to centimeter scale. In order to realize both high sensitivity and spatial resolution, various optical ultrasound sensors have been developed. Among them, ultrasound sensors using high-$Q$ optical microcavities have realized unprecedented sensitivities and broad bandwidth and can be mass-produced on a silicon chip. In this review, we introduce ultrasound sensors using three types of optical microcavities, including Fabry-Perot cavities, $π$-phase-shifted Bragg gratings, and whispering gallery mode microcavities. We introduce the sensing mechanisms using optical microcavities and discuss several key parameters for ultrasound sensors. We then review the recent work on ultrasound sensing using these three types of microcavities and their applications in practical detection scenarios, such as photoacoustic imaging, ranging, and particle detection.

physics.optics

Controllable Spin-Resolved Photon Emission Enhanced by Slow-Light Mode in Photonic Crystal Waveguides on Chip

We report the slow-light enhanced spin-resolved in-plane emission from a single quantum dot (QD) in a photonic crystal waveguide (PCW). The slow light dispersions in PCWs are designed to match the emission wavelengths of single QDs. The resonance between two spin states emitted from a single QD and a slow light mode of a waveguide is investigated under a magnetic field with Faraday configuration. Two spin states of a single QD experience different degrees of enhancement as their emission wavelengths are shifted by combining diamagnetic and Zeeman effects with an optical excitation power control. A circular polarization degree up to 0.81 is achieved by changing the off-resonant excitation power. Strongly polarized photon emission enhanced by a slow light mode shows great potential to attain controllable spin-resolved photon sources for integrated optical quantum networks on chip.

cond-mat.mes-hall

Integrated vortex soliton microcombs

The frequency and orbital angular momentum (OAM) are independent physical properties of light that both offer unbounded degrees of freedom. However, creating, processing, and detecting high-dimensional OAM states have been a pivot and long-lasting task, as the complexity of the required optical systems scales up drastically with the OAM dimension. On the other hand, mature toolboxes -- such as optical frequency combs -- have been developed in the frequency domain for parallel measurements with excellent fidelity. Here we correlate the two dimensions into an equidistant comb structure on a photonic chip. Dissipative optical solitons formed in a nonlinear microresonator are emitted through the engraved angular gratings with each comb line carrying distinct OAM. Such one-to-one correspondence between the OAM and frequencies manifests state-of-the-art extinction ratios over 18.5 dB, enabling precision spectroscopy of optical vortices. The demonstrated vortex soliton microcombs provide coherent light sources that are multiplexed in the spatial and frequency domain, having the potential to establish a new modus operandi of high-dimensional structured light.

physics.optics

Micropascal-sensitivity ultrasound sensors based on optical microcavities

Whispering gallery mode (WGM) microcavities have been widely used for high-sensitivity ultrasound detection, due to their optical and mechanical resonances enhanced sensitivity. The ultrasound sensitivity of the cavity optomechanical system is fundamentally limited by the thermal noise. In this work, we theoretically and experimentally investigate the thermal-noise-limited sensitivity of a WGM microdisk ultrasound sensor, and optimize the sensitivity by varying the radius and thickness of the microdisk, as well as using a trench structure around the disk. Using a microdisk with a radius of 300 um and thickness of 2 um, a peak sensitivity of 1.18 uPa Hz^{-1/2} is achieved at 82.6 kHz, which is to our knowledge the record sensitivity among the cavity optomechanical ultrasound sensors. Such high sensitivity can improve the detection range of air-coupled ultrasound sensing technology.

physics.optics

High sensitivity air-coupled MHz frequency ultrasound detection using on-chip microcavities

Owing to their dual-resonance enhanced sensitivity, cavity optomechanical systems provide an ideal platform for ultrasound sensing. In this work, we realize high sensitivity air-coupled ultrasound sensing from kilohertz (kHz) to megahertz (MHz) frequency range based on whispering gallery mode microcavities. Using a 57 um-diameter microtoroid with high optical Q factor (~10^7) and mechanical Q factor (~700), we achieve sensitivities of 46 uPa Hz^{-1/2}-10 mPa Hz^{-1/2} in a frequency range of 0.25-3.2 MHz. Thermal-noise-limited sensitivity is realized around the mechanical resonance at 2.56 MHz, in a frequency range of 0.6 MHz. We also observe the second- and third-order mechanical sidebands, and quantitatively study the intensities of each mechanical sideband as a function of the mechanical displacement. Measuring the combination of signal to noise ratios at all sidebands has the potential to extend the dynamic range of ultrasound sensing. In addition, to improve the ultrasound sensitivity in the kHz frequency range, we use a microdisk with a diameter of 200 um, and achieve sensitivities of 1.83 uPa Hz^{-1/2}-10.4 mPa Hz^{-1/2} in 30 kHz-1.65 MHz range.

physics.optics

Fully reconfigurable optomechanical add-drop filters

Fully reconfigurable add-drop filters (ADFs) have important applications in optical communication and information processing. Here we demonstrate a broadly tunable add-drop filter based on a double-disk cavity optomechanical system, side-coupled with a pair of tapered fiber waveguides. By varying the coupling rates between the cavity and the two waveguides, we investigate the dependence of the through (drop) efficiency on the coupling rates, which agrees well with the theoretical results. By optimizing the cavity-waveguide coupling rates, a drop efficiency of 89% and a transmission of 1.9% have been achieved. Benefiting from the large optomechanical coupling coefficient of the double-disk microcavity, a tuning range of 8 nm has been realized, which is more than one free spectral range (FSR) of the cavity. This is realized by changing the air gap of the double disk using a fiber tip, which is controlled by a piezoelectrical nanostage, with a required voltage of 7 V. As a result, both the through and drop signals can be resonant with any wavelength within the transparent window of the cavity material, which indicates that the ADF is fully reconfigurable.

physics.optics

Topological cavity based on slow light topological edge mode for broadband Purcell enhancement

Slow light in topological valley photonic crystal structures offers new possibilities to enhance light-matter interaction. We report a topological cavity based on slow light topological edge mode for broadband Purcell enhancement. The topological edge modes with large group indices over 100 can be realized with a bearded interface between two topologically distinct valley photonic crystals, featuring the greatly enhanced Purcell factor because of the increased local density of states. In the slow light regime, the topological cavity supports much more cavity modes with higher quality factor than that in the fast light regime, which is both demonstrated theoretically and experimentally. We demonstrate the cavity enables the broadband Purcell enhancement together with substantial Purcell factor, benefiting from dense cavity modes with high quality factor in a wide spectral range. It has great benefit to the realization of high-efficiency quantum-dot-based single-photon sources and entangled-photon sources with less restriction on spectral match. Such topological cavity could serve as a significant building block toward the development of photonic integrated circuits with embedded quantum emitters.

physics.optics

Enhanced emission from a single quantum dot in a microdisk at a deterministic diabolical point

We report on controllable cavity modes through controlling the backscattering by two identical scatterers. Periodic changes of the backscattering coupling between two degenerate cavity modes are observed with the angle between two scatterers and elucidated by a theoretical model using two-mode approximation and numerical simulations. The periodically appearing single-peak cavity modes indicate mode degeneracy at diabolical points. Then interactions between single quantum dots and cavity modes are investigated. Enhanced emission of a quantum dot with a six-fold intensity increase is obtained in a microdisk at a diabolical point. This method to control cavity modes allows large-scale integration, high reproducibility and fexible design of the size, location, quantity and shape for scatterers, which can be applied for integrated photonic structures with scatterer-modified light-matter interaction.

cond-mat.mes-hall

Ultra-broadband and sensitive cavity optomechanical magnetometry

Magnetostrictive optomechanical cavities provide a new optically-readout approach to room temperature magnetometry. Here we report ultrasensitive and ultrahigh bandwidth cavity optomechanical magnetometers constructed by embedding a grain of the magnetostrictive material Terfenol-D within a high quality (Q) optical microcavity on a silicon chip. By engineering their physical structure, we achieve a peak sensitivity of 26 pT/Hz^1/2 comparable to the best cryogenic microscale magnetometers, along with a 3~dB bandwidth as high as 11.3 MHz. Two classes of magnetic response are observed, which we postulate arise from the crystallinity of the Terfenol-D. This allows single- and poly-crystalline grains to be distinguished at the level of a single particle. Our results may enable applications such as lab-on-chip nuclear magnetic spectroscopy and magnetic navigation.

physics.app-ph

Diabolical Points in Coupled Active Cavities with Quantum Emitters

In single microdisks, embedded active emitters intrinsically affect the cavity mode of microdisks, which results in a trivial symmetric backscattering and a low controllability. Here we propose a macroscopical control of the backscattering direction by optimizing the cavity size. The signature of positive and negative backscattering directions in each single microdisk is confirmed with two strongly coupled microdisks. Furthermore, the diabolical points are achieved at the resonance of two microdisks, which agrees well with the theoretical calculations considering backscattering directions. The diabolical points in active optical structures pave a way to implement quantum information processing with geometric phase in quantum photonic networks.

physics.optics