arXiv subjects

Bei-Bei Li

Publications and source records attributed to Bei-Bei Li.

29 records · Page 2Linked to original sources

arXiv2020

Ultra-broadband and sensitive cavity optomechanical magnetometry

Magnetostrictive optomechanical cavities provide a new optically-readout approach to room temperature magnetometry. Here we report ultrasensitive and ultrahigh bandwidth cavity optomechanical magnetometers constructed by embedding a grain of the magnetostrictive material Terfenol-D within a high quality (Q) optical microcavity on a silicon chip. By engineering their physical structure, we achieve a peak sensitivity of 26 pT/Hz^1/2 comparable to the best cryogenic microscale magnetometers, along with a 3~dB bandwidth as high as 11.3 MHz. Two classes of magnetic response are observed, which we postulate arise from the crystallinity of the Terfenol-D. This allows single- and poly-crystalline grains to be distinguished at the level of a single particle. Our results may enable applications such as lab-on-chip nuclear magnetic spectroscopy and magnetic navigation.

physics.app-ph↗

arXiv2020

Diabolical Points in Coupled Active Cavities with Quantum Emitters

In single microdisks, embedded active emitters intrinsically affect the cavity mode of microdisks, which results in a trivial symmetric backscattering and a low controllability. Here we propose a macroscopical control of the backscattering direction by optimizing the cavity size. The signature of positive and negative backscattering directions in each single microdisk is confirmed with two strongly coupled microdisks. Furthermore, the diabolical points are achieved at the resonance of two microdisks, which agrees well with the theoretical calculations considering backscattering directions. The diabolical points in active optical structures pave a way to implement quantum information processing with geometric phase in quantum photonic networks.

physics.optics↗

arXiv2019

Many-Body Effect of Mesoscopic Localized States in MoS$_2$ Monolayer

Transition metal dichalcogenide monolayers provide an emerging material system to implement quantum photonics with intrinsic two-dimensional excitons or embedded zero-dimensional localized states. Here we demonstrate the mesoscopic localized states between two- and zero- dimensions, which is a many-body system with electron-electron Coulomb interactions. A fine structure splitting is observed, which is similar to quantum dots. Meanwhile the polarization is changed by the magnetic field, due to the nature of two-dimensional monolayers. Furthermore, a large quadratic diamagnetism with a coefficient of around $100\ \mathrm{μeV/T^2}$ is observed, as a unique consequence of the mesoscopic scale. The many-body effect also results in the emission energy variation and linewidth narrowing in the spectrum, which corresponds well to the theoretical analysis. These unique properties indicate the great potential of mesoscopic localized states in many-body physics and quantum photonics.

cond-mat.mes-hall↗

arXiv2018

Free spectral range electrical tuning of a high quality on-chip microcavity

Reconfigurable photonic circuits have applications ranging from next-generation computer architectures to quantum networks, coherent radar and optical metamaterials. However, complete reconfigurability is only currently practical on millimetre-scale device footprints. Here, we overcome this barrier by developing an on-chip high quality microcavity with resonances that can be electrically tuned across a full free spectral range (FSR). FSR tuning allows resonance with any source or emitter, or between any number of networked microcavities. We achieve it by integrating nanoelectronic actuation with strong optomechanical interactions that create a highly strain-dependent effective refractive index. This allows low voltages and sub-nanowatt power consumption. We demonstrate a basic reconfigurable photonic network, bringing the microcavity into resonance with an arbitrary mode of a microtoroidal optical cavity across a telecommunications fibre link. Our results have applications beyond photonic circuits, including widely tuneable integrated lasers, reconfigurable optical filters for telecommunications and astronomy, and on-chip sensor networks.

physics.app-ph↗

arXiv2018

On-chip scalable optomechanical magnetometers

The dual-resonant enhancement of mechanical and optical response in cavity optomechanical magnetometers enables precision sensing of magnetic fields. In previous working prototypes of such magnetometers, a cavity optomechanical system is functionalized by manually epoxy-bonding a grain of magnetostrictive material. While this approach allows proof-of-principle demonstrations, practical applications require more scalable and reproducible fabrication pathways. In this work, we scalably fabricate optomechanical magnetometers on a silicon chip, with reproducible performance across different devices, by sputter coating a magnetostrictive film onto high quality toroidal microresonators. Furthermore, we demonstrate that thermally annealing the sputtered film can improve the magnetometer sensitivity by a factor of 6.3. A peak sensitivity of 585 pT/Hz^1/2 is achieved, which is comparable with previously reported results using epoxy-bonding.

physics.app-ph↗

arXiv2018

Quantum enhanced optomechanical magnetometry

The resonant enhancement of both mechanical and optical response in microcavity optomechanical devices allows exquisitely sensitive measurements of stimuli such as acceleration, mass and magnetic fields. In this work, we show that quantum correlated light can improve the performance of such sensors, increasing both their sensitivity and their bandwidth. Specifically, we develop a silicon-chip based cavity optomechanical magnetometer that incorporates phase squeezed light to suppress optical shot noise. At frequencies where shot noise is the dominant noise source this allows a 20% improvement in magnetic field sensitivity. Furthermore, squeezed light broadens the range of frequencies at which thermal noise dominates, which has the effect of increasing the overall sensor bandwidth by 50%. These proof-of-principle results open the door to apply quantum correlated light more broadly in chip-scale sensors and devices.

physics.optics↗

arXiv2012

Cavity QED treatment of scattering-induced efficient free-space excitation and collection in high-Q whispering-gallery microcavities

Whispering-gallery microcavity laser possesses ultralow threshold, whereas convenient free-space optical excitation and collection suffer from low efficiencies due to its rotational symmetry. Here we analytically study a three-dimensional microsphere coupled to a nano-sized scatterer in the framework of quantum optics. It is found that the scatterer is capable of coupling light in and out of the whispering-gallery modes (WGMs) without seriously degrading their high-Q properties, while the microsphere itself plays the role of a lens to focus the input beam on the scatterer and vice versa. Our analytical results show that (1) the high-Q WGMs can be excited in free space, and (2) over 50% of the microcavity laser emission can be collected within less than ${1}^{\circ}$. This coupling system holds great potential for low threshold microlasers free of external couplers.

quant-ph↗

arXiv2012

Strongly enhanced light-matter interaction in a hybrid photonic-plasmonic resonator

We propose a hybrid photonic-plasmonic resonant structure which consists of a metal nanoparticle (MNP) and a whispering gallery mode (WGM) microcavity. It is found that the hybrid mode enables a strong interaction between the light and matter, and the single-atom cooperativity is enhanced by more than two orders of magnitude compared to that in a bare WGM microcavity. This remarkable improvement originates from two aspects: (1) the MNP offers a highly enhanced local field in the vicinity of an emitter, and (2), surprisingly, the high-\textit{Q} property of WGMs can be maintained in the presence of the MNP. Thus the present system has great advantages over a single microcavity or a single MNP, and holds great potential in quantum optics, nonlinear optics and highly sensitive biosening.

quant-ph↗

arXiv2011

Coupling of a Single Diamond Nanocrystal to a Whispering-Gallery Microcavity: Photon Transportation Benefitting from Rayleigh Scattering

We study the Rayleigh scattering induced by a diamond nanocrystal in a whispering-gallery-microcavity--waveguide coupling system, and find that it plays a significant role in the photon transportation. On one hand, this study provides a new insight into future solid-state cavity quantum electrodynamics toward strong coupling physics. On the other hand, benefitting from this Rayleigh scattering, novel photon transportation such as dipole induced transparency and strong photon antibunching can occur simultaneously. As potential applications, this system can function as high-efficiency photon turnstiles. In contrast to [B. Dayan \textit{et al.}, \textrm{Science} \textbf{319},1062 (2008)], the photon turnstiles proposed here are highly immune to nanocrystal's azimuthal position.

quant-ph↗

arXiv2010

On chip, high-sensitivity thermal sensor based on high-Q polydimethylsiloxane-coated microresonator

A high-sensitivity thermal sensing is demonstrated by coating a layer of polydimethylsiloxane (PDMS) on the surface of a silica toroidal microresonator on a silicon wafer. Possessing high-Q whispering gallery modes (WGMs), the PDMS-coated microresonator is highly sensitive to the temperature change of the surroundings. We find that, when the PDMS layer becomes thicker, the WGM experiences a transition from red- to blue-shift with temperature increasing due to the negative thermal-optic coefficient of PDMS. The measured sensitivity (0.151 nm/K) is one order of magnitude higher than pure silica microcavity sensors. The ultra-high resolution of the thermal sensor is also analyzed to reach 10-4 K.

physics.optics↗

arXiv2010

High-Q exterior whispering gallery modes in a metal-coated microresonator

We propose a kind of plasmonic whispering gallery modes highly localized on the exterior surface of a metal-coated microresonator. This exterior (EX) surface mode possesses high quality factors at room temperature, and can be efficiently excited by a tapered fiber. The EX mode can couple to an interior (IN) mode and this coupling produces a strong anti-crossing behavior, which not only allows conversion of IN to EX modes, but also forms a long-lived anti-symmetric mode. As a potential application, the EX mode could be used for a biosensor with a sensitivity high up to 500 nm per refraction index unit, a large figure of merit, and a wide detection range.

physics.optics↗