SearcharxivSearch

arXiv subjects

Bertrand Plez

Publications and source records attributed to Bertrand Plez.

At least 19 recordsLinked to original sources

Solar carbon abundance from 3D non-LTE modelling of the diagnostic lines of the CH molecule

The spectral lines of the CH molecule are a key carbon (C) abundance diagnostic in FGKM-type stars. These lines are detectable in metal-rich and, in contrast to atomic C lines, also in metal-poor late-type stars. However, only 3D LTE analyses of the CH lines have been performed so far. We test the formation of CH lines in the solar spectrum, using for the first time, 3D Non-LTE (NLTE) models. We also aim to derive the solar photospheric abundance of C, using the diagnostic transitions in the optical (4218 - 4356 $\r{A}$) and infrared (33025 - 37944 $\r{A}$). We use the updated NLTE model molecule from Popa et al. 2023 and different solar 3D radiation-hydrodynamics model atmospheres. The models are contrasted against new spatially-resolved optical solar spectra, and the center-to-limb variation (CLV) of CH lines is studied. We find generally small ($\sim$0.01 dex) NLTE effects in the optical and IR diagnostic CH A-X lines in the solar atmosphere. Both 3D NLTE and 3D LTE spectral modelling yield an excellent fit to the solar intensity observations at all viewing angles. The 1D LTE and 1D NLTE models fail to describe the line CLV, and lead to underestimated solar C abundances. The 3D NLTE modelling of diagnostic lines in the optical and IR yields a carbon abundance of A(C)=8.52$\pm$0.07 dex. The estimate is in agreement with recent results based on neutrino fluxes measured by Borexino. 3D NLTE modelling and tests on spatially-resolved solar data are essential to derive robust solar abundances. The analysis presented here focuses on CH, but we expect that similar effects will be present for other molecules of astrophysical interest.

astro-ph.SR

StarDICE IV: correcting visible photometry from atmospheric gray extinction using thermal infrared observations

Ground-based surveys such as the Vera C. Rubin Observatory's Legacy Survey of Space and Time require photometric calibration that is both long-term stable and spatially uniform at the sub-per cent level, even during non-photometric conditions. Achieving this precision motivates new approaches to characterize atmospheric transmission, particularly to mitigate grey extinction from clouds. The StarDICE experiment aims to establish a metrology chain linking laboratory standards to astrophysical fluxes with 1 mmag accuracy in the $\textit{griz}$ bands, a goal for which controlling variable atmospheric effects is essential. We present a method that corrects photometric measurements using simultaneous radiometric information from an infrared thermal camera. The grey-extinction model is fit on an image-by-image basis using thermal radiance excess and the difference between synthetic and instrumental fluxes of calibration stars, without requiring assumptions about the spatial structure of extinction. The method relies on a forward model that incorporates environmental monitoring, radiative-transfer simulations, and Gaia DR3 stellar catalogues. Using data from a remote observing system that repeatedly monitored two fields under diverse atmospheric conditions, we show that the corrections reduce residuals between corrected and reference magnitudes and produce extinction maps with 2-arcmin resolution and ~0.01 mag accuracy. Using this technique, we can recover data acquired under non-photometric conditions with a precision comparable to data obtained under photometric conditions. For the most affected exposures, the mean absolute error improves from 0.64 to 0.11 mag, and temporal extinction variations can be reduced to 0.025 mag per source. We discuss the implications of this technique for future surveys and outline directions for further refinement.

astro-ph.IM

StarDICE III: Characterization of the photometric instrument with a Collimated Beam Projector

The measurement of type Ia supernovae magnitudes provides cosmological distances, which can be used to constrain dark energy parameters. Large photometric surveys require a substantial improvement in the calibration precision of their photometry to reduce systematic uncertainties in cosmological constraints. The StarDICE experiment is designed to establish accurate broadband flux references for these surveys, aiming for sub-percent precision in magnitude measurements. This requires a precise measurement of the filter bandpasses of both the StarDICE and survey instruments with sub-nanometer accuracy. To that end, we have developed the Collimated Beam Projector (CBP), an optical device capable of calibrating the throughput of an astronomical telescope and of its filters. The CBP is built from a tunable laser source and a reversed telescope to emit a parallel monochromatic light beam that is continuously monitored in flux and wavelength. The CBP output light flux is measured using a large area photodiode, previously calibrated relative to a NIST photodiode. We derive the StarDICE telescope throughput and filter transmissions from the CBP measurements, anchoring it to the absolute calibration provided by the NIST. After analyzing the systematic uncertainties, we achieved sub-nanometer accuracy in determining filter central wavelengths, measured each filter transmission with a precision of 0.5% per 1nm bin, and detected out-of-band leakages at 0.01%. Furthermore, we have synthesized the equivalent transmission for full pupil illumination from four sample positions in the StarDICE telescope mirror, with an accuracy of approximately 0.2nm for central wavelengths and 7mmag for broadband fluxes. We demonstrated our ability to characterize a telescope throughput down to the mmag, and paved the way for future developments, such as a portable CBP version for in-situ transmission monitoring.

astro-ph.IM

M3DIS -- A grid of 3D radiation-hydrodynamics stellar atmosphere models for stellar surveys

Large-scale stellar surveys, such as SDSS-V, 4MOST, WEAVE, and PLATO, require accurate atmospheric models and synthetic spectra of stars for accurate analyses of fundamental stellar parameters and chemical abundances. The primary goal of our work is to develop a new approach to solve radiation-hydrodynamics (RHD) and generate model stellar spectra in a self-consistent and highly efficient framework. We build upon the Copenhagen legacy RHD code, the MULTI3D non-local thermodynamic equilibrium (NLTE) code, and the DISPATCH high-performance framework. The new approach allows us to calculate 3D RHD models of stellar atmospheres on timescales of a few thousand CPU hours and to perform subsequent spectrum synthesis in local thermodynamic equilibrium (LTE) or NLTE for the desired physical conditions within the parameter space of FGK-type stars. We compare the 3D RHD solar model with other available models and validate its performance against solar observations, including the centre-to-limb variation of intensities and key solar diagnostic lines of H and Fe. We show that the performance of the new code allows to overcome the main bottleneck in 3D NLTE spectroscopy and enables calculations of multi-dimensional grids of synthetic stellar observables for comparison with modern astronomical observations.

astro-ph.SR

First release of PLATO consortium stellar limb-darkening coefficients

We release the first grid of stellar limb-darkening coefficients (LDCs) and intensity profiles (IPs) computed by the consortium of the PLAnetary Transits and Oscillations of stars (PLATO), the next medium-class (M3) mission under development by the European Space Agency (ESA) to be launched in 2026. We have performed spectral synthesis with \texttt{TurboSpectrum} on a grid of \texttt{MARCS} model atmospheres. Finally, we adopted \texttt{ExoTETHyS} to convolve the high-resolution spectra ($R=2\times10^5$) with the state-of-the-art response functions for all the PLATO cameras, and computed the LDCs that best approximate the convolved IPs. In addition to the PLATO products, we provide new LDCs and IPs for the Kepler mission, based on the same grid of stellar atmospheric models and calculation procedures. The data can be downloaded from the following link: \url{https://doi.org/10.5281/zenodo.7339706}.

astro-ph.EP

StarDICE I: sensor calibration bench and absolute photometric calibration of a Sony IMX411 sensor

The Hubble diagram of type-Ia supernovae (SNe-Ia) provides cosmological constraints on the nature of dark energy with an accuracy limited by the flux calibration of currently available spectrophotometric standards. The StarDICE experiment aims at establishing a 5-stage metrology chain from NIST photodiodes to stars, with a targeted accuracy of \SI{1}{mmag} in $griz$ colors. We present the first two stages, resulting in the calibration transfer from NIST photodiodes to a demonstration \SI{150}{Mpixel} CMOS sensor (Sony IMX411ALR as implemented in the QHY411M camera by QHYCCD). As a side-product, we provide full characterization of this camera. A fully automated spectrophotometric bench is built to perform the calibration transfer. The sensor readout electronics is studied using thousands of flat-field images from which we derive stability, high resolution photon transfer curves and estimates of the individual pixel gain. The sensor quantum efficiency is then measured relative to a NIST-calibrated photodiode. Flat-field scans at 16 different wavelengths are used to build maps of the sensor response. We demonstrate statistical uncertainty on quantum efficiency below \SI{0.001}{e^-/\gamma} between \SI{387}{nm} and \SI{950}{nm}. Systematic uncertainties in the bench optics are controlled at the level of \SI{1e-3}{e^-/\gamma}. Uncertainty in the overall normalization of the QE curve is 1\%. Regarding the camera we demonstrate stability in steady state conditions at the level of \SI{32.5}{ppm}. Homogeneity in the response is below \SI{1}{\percent} RMS across the entire sensor area. Quantum efficiency stays above \SI{50}{\percent} in most of the visible range, peaking well above \SI{80}{\percent} between \SI{440}{nm} and \SI{570}{nm}. Differential non-linearities at the level of \SI{1}{\percent} are detected. A simple 2-parameter model is proposed to mitigate the effect.

astro-ph.IM

The effect of winds in red supergiants: modeling for interferometry

Red supergiants (RSGs) are evolved massive stars in a stage preceding core-collapse supernova. Understanding evolved-phases of these cool stars is key to understanding the cosmic matter cycle of our Universe, since they enrich the cosmos with newly formed elements. However, the physical processes that trigger mass loss in their atmospheres are still not fully understood, and remain one of the key questions in stellar astrophysics. We use a new method to study the extended atmospheres of these cold stars, exploring the effect of a stellar wind for both a simple radiative equilibrium model and a semi-empirical model that accounts for a chromospheric temperature structure. We then can compute the intensities, fluxes and visibilities matching the observations for the different instruments at the Very Large Telescope Interferometer (VLTI). Specifically, when comparing with the atmospheric structure of HD 95687 based on published VLTI/AMBER data, we find that our model can accurately match these observations in the Kband, showing the enormous potential of this methodology to reproduce extended atmospheres of RSGs.

astro-ph.SR

Explosion Imminent: the appearance of Red Supergiants at the point of core-collapse

From the early radiation of type II-P supernovae (SNe), it has been claimed that the majority of their red supergiant (RSG) progenitors are enshrouded by large amounts of circumstellar material (CSM) at the point of explosion. The inferred density of this CSM is orders of magnitude above that seen around RSGs in the field, and is therefore indicative of a short phase of elevated mass-loss prior to explosion. It is not known over what timescale this material gets there: is it formed over several decades by a `superwind' with mass-loss rate $\dot{M} \sim10^{-3}\,{\rm M_\odot\,yr^{-1}}$; or is it formed in less than a year by a brief `outburst' with $\dot{M}\sim10^{-1}\,{\rm M_\odot\,yr^{-1}}$? In this paper, we simulate spectra for RSGs undergoing such mass-loss events, and demonstrate that in either scenario the CSM suppresses the optical flux by over a factor of 100, and that of the near-IR by a factor of 10. We argue that the `superwind' model can be excluded as it causes the progenitor to be heavily obscured for decades before explosion, and is strongly at odds with observations of II-P progenitors taken within 10 years of core-collapse. Instead, our results favour abrupt outbursts $<$1 year before explosion as the explanation for the early optical radiation of II-P SNe. We therefore predict that RSGs will undergo dramatic photometric variability in the optical and infrared in the weeks-to-months before core-collapse.

astro-ph.SR

Evidence of Deep Mixing in IRS 7, a Cool Massive Supergiant Member of the Galactic Nuclear Star Cluster

The center of the Milky Way contains stellar populations spanning a range in age and metallicity, with a recent star formation burst producing young and massive stars. Chemical abundances in the most luminous stellar member of the Nuclear Star Cluster (NSC), IRS 7, are presented for $^{19}$F, $^{12}$C, $^{13}$C, $^{14}$N, $^{16}$O, $^{17}$O, and Fe from an LTE analysis based on spherical modeling and radiative transfer with a 25M$_{\odot}$ model atmosphere, whose chemistry was tailored to the derived photospheric abundances. We find IRS 7 to be depleted heavily in both $^{12}$C (~-0.8 dex) and $^{16}$O (~-0.4 dex), while exhibiting an extremely enhanced $^{14}$N abundance (~+1.1 dex), which are isotopic signatures of the deep mixing of CNO-cycled material to the stellar surface. The $^{19}$F abundance is also heavily depleted by ~1 dex relative to the baseline fluorine of the Nuclear Star Cluster, providing evidence that fluorine along with carbon constrain the nature of the deep mixing in this very luminous supergiant. The abundances of the minor isotopes $^{13}$C and $^{17}$O are also derived, with ratios of $^{12}$C/$^{13}$C~5.3 and $^{16}$O/$^{17}$O~525. The derived abundances for IRS 7, in conjunction with previous abundance results for massive stars in the NSC, are compared with rotating and non-rotating models of massive stars and it is found that the IRS 7 abundances overall follow the behavior predicted by stellar models. The depleted fluorine abundance in IRS 7 illustrates, for the first time, the potential of using the $^{19}$F abundance as a mixing probe in luminous red giants.

astro-ph.SR

Non-LTE Radiative Transfer with Turbospectrum

Physically realistic models of stellar spectra are needed in a variety of astronomical studies, from the analysis of fundamental stellar parameters, to studies of exoplanets and stellar populations in galaxies. Here we present a new version of the widely-used radiative transfer code Turbospectrum, which we update with the capacity to perform spectrum synthesis for lines of multiple chemical elements in Non-Local Thermodynamic Equilibrium (NLTE). We use the code in the analysis of metallicites and abundances of the Gaia FGK benchmark stars, using one-dimensional MARCS atmospheric models and the averages of 3D radiation-hydrodynamics simulations of stellar surface convection. We show that the new more physically realistic models offer a better description of the observed data and make the program and the associated microphysics data publicly available, including grids of NLTE departure coefficients for H, O, Na, Mg, Si, Ca, Ti, Mn, Fe, Co, Ni, Sr, and Ba.

astro-ph.SR

An Estimator for Lensing Potential from Galaxy Number Counts

We derive an estimator for the lensing potential from galaxy number counts which contains a linear and a quadratic term. We show that this estimator has a much larger signal-to-noise ratio than the corresponding estimator from intensity mapping. This is due to the additional lensing term in the number count angular power spectrum which is present already at linear order. We estimate the signal-to-noise ratio for future photometric surveys. Particularly at high redshifts, $z\gtrsim 1.5$, the signal to noise ratio can become of order 30. Therefore, the number counts in photometric surveys would be an excellent means to measure tomographic lensing spectra.

astro-ph.CO

Observational constraints on the origin of the elements. IV: The standard composition of the Sun

The chemical composition of the Sun is requested in the context of various studies in astrophysics, among them in the calculation of the standard solar models (SSMs), which describe the evolution of the Sun from the pre-main-sequence to its present age. In this work, we provide a critical re-analysis of the solar chemical abundances and corresponding SSMs. For the photospheric values, we employ new high-quality solar observational data collected with the IAG facility, state-of-the art non-equilibrium modelling, new oscillator strengths, and different atmospheric models, including the MARCS model, but also averages based on Stagger and CO5BOLD 3D radiation-hydrodynamics simulations of stellar convection. We perform new calculations of oscillator strengths for transitions in O I and N I. For O I - the critical element for the interior models - calculations are carried out using several independent methods. We find unprecedented agreement between the new estimates of transition probabilities, thus supporting our revised solar oxygen abundance. We also provide new estimates of the noble gas Ne abundance. We investigate our results in comparison with the previous estimates. We discuss the consistency of our photospheric measurements with meteoritic values taking into account systematic and correlated errors. Finally, we provide revised chemical abundances, leading to a new value of the solar photospheric present-day metallicity $Z/X = 0.0225$, and employ them in the calculations of the SSM. We find that the puzzling mismatch between the helioseismic constraints on the solar interior structure and the model is resolved with the new chemical composition.

astro-ph.SR

The SAPP pipeline for the determination of stellar abundances and atmospheric parameters of stars in the core program of the PLATO mission

We introduce the SAPP (Stellar Abundances and atmospheric Parameters Pipeline), the prototype of the code that will be used to determine parameters of stars observed within the core program of the PLATO space mission. The pipeline is based on the Bayesian inference and provides effective temperature, surface gravity, metallicity, chemical abundances, and luminosity. The code in its more general version can have a much wider range of applications. It can also provide masses, ages, and radii of stars and can be used for stars of stellar types not targeted by the PLATO core program, such as red giants. We validate the code on a set of 27 benchmark stars that includes 19 FGK-type dwarfs, 6 GK-type sub-giants, and 2 red giants. Our results suggest that combining various observables is the optimal approach, as it allows to break degeneracies between different parameters and yields more accurate values of stellar parameters and more realistic uncertainties. For the PLATO core sample, we obtain a typical uncertainty of 27 ($\rm{syst.}$) $\pm$ 37 ($\rm{stat.}$) K for T$_{\rm{eff}}$, 0.00 $\pm$ 0.01 dex for log$g$, 0.02 $\pm$ 0.02 dex for metallicity [Fe/H], -0.01 $\pm$ 0.03 R$_\odot$ for radii, -0.01 $\pm$ 0.05 M$_\odot$ for stellar masses, and -0.14 $\pm$ 0.63 Gyrs for ages. We also show that the best results are obtained by combining the $\nu_{max}$ scaling relation and stellar spectra. This resolves the notorious problem of degeneracies, which is particularly important for F-type stars.

astro-ph.SR

The impact of winds on the spectral appearance of Red Supergiants

The rate at which mass is lost during the Red Supergiant evolutionary stage may strongly influence how the star appears. Though there have been many studies discussing how RSGs appear in the mid and far infrared (IR) as a function of their mass-loss rate, to date there have been no such investigations at optical and near-IR wavelengths. In a preliminary study we construct model atmospheres for RSGs which include a wind, and use these models to compute synthetic spectra from the optical to the mid-infrared. The inclusion of a wind has two important effects. Firstly, higher mass-loss rates result in stronger absorption in the TiO bands, causing the star to appear as a later spectral type despite its effective temperature remaining constant. This explains the observed relation between spectral type, evolutionary stage and mid-IR excess, as well as the mismatch between temperatures derived from the optical and infrared. Secondly, the wind mimics many observed characteristics of a `MOLsphere', potentially providing an explanation for the extended molecular zone inferred to exist around nearby RSGs. Thirdly, we show that wind fluctuations can explain the spectral variability of Betelgeuse during its recent dimming, without the need for dust.

astro-ph.SR

The temperatures of red supergiants in low metallicity environments

The temperatures of red supergiants (RSGs) are expected to depend on metallicity (Z) in such a way that lower-Z RSGs are warmer. In this work, we investigate the Z-dependence of the Hayashi limit by analysing RSGs in the low-Z galaxy Wolf-Lundmark-Mellote (WLM), and compare with the RSGs in the higher-Z environments of the Small Magellanic Cloud (SMC) and Large Magellanic Cloud (LMC). We determine the effective temperature ($T_{\textrm{eff}}$) of each star by fitting their spectral energy distributions, as observed by VLT+SHOOTER, with MARCS model atmospheres. We find average temperatures of $T_{\textrm{eff}_{\textrm{WLM}}}=4400\pm202$ K, $T_{\textrm{eff}_{\textrm{SMC}}}=4130\pm103$ K, and $T_{\textrm{eff}_{\textrm{LMC}}}=4140\pm148$ K. From population synthesis analysis, we find that although the Geneva evolutionary models reproduce this trend qualitatively, the RSGs in these models are systematically too cool. We speculate that our results can be explained by the inapplicability of the standard solar mixing length to RSGs.

astro-ph.GA

S stars and s-process in the Gaia era II. Constraining the luminosity of the third dredge-up with Tc-rich S stars

S stars are late-type giants that are transition objects between M-type stars and carbon stars on the asymptotic giant branch (AGB). They are classified into two types: intrinsic or extrinsic, based on the presence or absence of technetium (Tc). The Tc-rich or intrinsic S stars are thermally-pulsing (TP-)AGB stars internally producing s-process elements (including Tc) which are brought to their surface via the third dredge-up (TDU). Tc-poor or extrinsic S stars gained their s-process overabundances via accretion of s-process-rich material from an AGB companion which has since turned into a dim white dwarf. Our goal is to investigate the evolutionary status of Tc-rich S stars by locating them in a Hertzsprung-Russell (HR) diagram using the results of Gaia early Data Release 3 (EDR3). We combine the current sample of 13 Tc-rich stars with our previous studies of 10 Tc-rich stars to determine the observational onset of the TDU in the metallicity range [-0.7; 0]. We also compare our abundance determinations with dedicated AGB nucleosynthesis predictions. The stellar parameters are derived using an iterative tool which combines HERMES high-resolution spectra, accurate Gaia EDR3 parallaxes, stellar evolution models and tailored MARCS model atmospheres for S-type stars. Using these stellar parameters we determine the heavy-element abundances by line synthesis. In the HR diagram, the intrinsic S stars are located at higher luminosities than the predicted onset of the TDU. These findings are consistent with Tc-rich S stars being genuinely TP-AGB stars. The comparison of the derived s-process abundance profiles of our intrinsic S stars with the nucleosynthesis predictions provide an overall good agreement. Stars with highest [s/Fe] tend to have the highest C/O ratios.

astro-ph.SR

The APOGEE Data Release 16 Spectral Line List

The updated H-band spectral line list (from \lambda 15,000 - 17,000\AA) adopted by the Apache Point Observatory Galactic Evolution Experiment (APOGEE) for the SDSS IV Data Release 16 (DR16) is presented here. The APOGEE line list is a combination of atomic and molecular lines with data from laboratory, theoretical, and astrophysical sources. Oscillator strengths and damping constants are adjusted using high signal-to-noise, high-resolution spectra of the Sun and alpha Boo (Arcturus) as "standard stars". Updates to the DR16 line list, when compared to the previous DR14 version, are the inclusion of molecular H_2O and FeH lines, as well as a much larger (by a factor of ~4) atomic line list, which includes significantly more transitions with hyperfine splitting. More recent references and line lists for the crucial molecules CO and OH were used, as well as for C_2 and SiH. In contrast to DR14, DR16 contains measurable lines from the heavy neutron-capture elements cerium (as Ce II), neodymium (as Nd II), and ytterbium (as Yb II), as well as one line from rubidium (as Rb I), that may be detectable in a small fraction of APOGEE red giants.

astro-ph.SR

Observational constraints on the origin of the elements. III. Evidence for the dominant role of sub-Chandrasekhar SN Ia in the chemical evolution of Mn and Fe in the Galaxy

The abundance ratios of manganese to iron in late-type stars across a wide metallicity range place tight constraints on the astrophysical production sites of Fe-group elements. In this work, we investigate the chemical evolution of Mn in the Milky Way galaxy using high-resolution spectroscopic observations of stars in the Galactic disc and halo stars, as well as a sample of globular clusters. Our analysis shows that local thermodynamic equilibrium (LTE) leads to a strong imbalance in the ionisation equilibrium of Mn I and Mn II lines. Mn I produces systematically (up to 0.6 dex) lower abundances compared to the Mn II lines. Non-local thermodynamic equilibrium (NLTE) radiative transfer satisfies the ionisation equilibrium across the entire metallicity range, -3 < [Fe/H] < -1, leading to consistent abundances from both ionisation stages of the element. We compare the NLTE abundances with Galactic Chemical Evolution models computed using different sources of type Ia and type II supernova (SN Ia and SN II) yields. We find that a good fit to our observations can be obtained by assuming that a significant (~ 75%) fraction of SNe Ia stem from a sub-Chandrasekhar (sub-Ch) channel. While this fraction is larger than that found in earlier studies (~ 50%), we note that we still require ~ 25% near-Ch SNe Ia to obtain solar [Mn/Fe] at [Fe/H] = 0. Our new data also suggest higher SN II Mn yields at low metallicity than typically assumed in the literature.

astro-ph.GA