Searcharxiv⌕ Search

arXiv subjects

Bin Wu

Publications and source records attributed to Bin Wu.

At least 181 records · Page 10Linked to original sources

Ruppeiner Geometry of the RN-AdS Black Hole Using Shadow Formalism

The connection between the shadow radius and the Ruppeiner geometry of a charged static spherically symmetric black hole is investigated. The normalized curvature scalar is adopted, and its close relation to the Van der Waals-like and Hawking-Page phase transition of Reissner-Nordström AdS black hole is studied. The results show that the shadow radius is a useful tool to reveal the correct information of the phase structure and the underlying microstructure of the black hole, which opens a new window to investigate the strong gravity system from the observational point of view.

gr-qc↗

Wrinkling of soft magneto-active plates

Coupled magneto-mechanical wrinkling has appeared in many scenarios of engineering and biology. Hence, soft magneto-active (SMA) plates buckle when subject to critical uniform magnetic field normal to their wide surface. Here, we provide a systematic analysis of the wrinkling of SMA plates subject to an in-plane mechanical load and a transverse magnetic field?. We consider two loading modes: plane-strain loading and uni-axial loading, and two models of magneto-sensitive plates: the neo-Hookean ideal magneto-elastic model and the neo-Hookean magnetization saturation Langevin model. Our analysis relies on the theory of nonlinear magneto-elasticity and the associated linearized theory for superimposed perturbations. We derive the Stroh formulation of the governing equations of wrinkling, and combine it with the surface impedance method to obtain explicitly the bifurcation equations identifying the onset of symmetric and antisymmetric wrinkles. We also obtain analytical expressions of instability in the thin- and thick-plate limits. For thin plates, we make the link with classical Euler buckling solutions. We also perform an exhaustive numerical analysis to elucidate the effects of loading mode, load amplitude, and saturation magnetization on the nonlinear static response and bifurcation diagrams. We find that antisymmetric wrinkling modes always occur before symmetric modes. Increasing the pre-compression or heightening the magnetic field has a destabilizing effect for SMA plates, while the saturation magnetization enhances their stability. We show that the Euler buckling solutions are a good approximation to the exact bifurcation curves for thin plates.

cond-mat.soft↗

Effects of strain stiffening and electrostriction on tunable elastic waves in compressible dielectric elastomer laminates

This paper presents an electromechanical analysis of the nonlinear static response and the superimposed small-amplitude wave characteristics in an infinite periodic compressible dielectric elastomer (DE) laminate subjected to electrostatic excitations and prestress in the thickness direction. The enriched Gent material model is employed to account for the effects of strain stiffening and electrostriction of the DE laminate. The theory of nonlinear electroelasticity and related linearized incremental theory are exploited to derive the governing equations of nonlinear response and the dispersion relations of incremental shear and longitudinal waves. Numerical results reveal that the snap-through instability of a Gent DE laminate resulting from geometrical and material nonlinearities can be used to achieve a sharp transition in the position and width of wave band gaps. Furthermore, the influence of material properties (including Gent constants, the second strain invariant and electrostrictive parameters) and that of prestress on the snap-through instability and the electrostatic tunability of band gaps for both shear and longitudinal waves are discussed in detail. The electrostrictive effect and prestress are beneficial to stabilizing the periodic DE laminate. Depending on whether the snap-through instability occurs or not, a continuous variation or a sharp transition in wave band gaps can be realized by varying the electric stimuli. Our numerical findings are expected to provide a solid guidance for the design and manufacture of soft DE wave devices with tunable band structures.

cond-mat.soft↗

Tuning Elastic Waves in Soft Phononic Crystal Cylinders via Large Deformation and Electromechanical Coupling

Soft electroactive materials can undergo large deformation subjected to either mechanical or electrical stimulus, and hence they can be excellent candidates for designing extremely flexible and adaptive structures and devices. This paper proposes a simple one-dimensional soft phononic crystal cylinder made of dielectric elastomer to show how large deformation and electric field can be used jointly to tune the longitudinal waves propagating in the PC. A series of soft electrodes are placed periodically along the dielectric elastomer cylinder, and hence the material can be regarded as uniform in the undeformed state. This is also the case for the uniformly pre-stretched state induced by a static axial force only. The effective periodicity of the structure is then achieved through two loading paths, i.e. by maintaining the longitudinal stretch and applying an electric voltage over any two neighbouring electrodes, or by holding the axial force and applying the voltage. All physical field variables for both configurations can be determined exactly based on the nonlinear theory of electroelasticity. An infinitesimal wave motion is further superimposed on the pre-deformed configurations and the corresponding dispersion equations are derived analytically by invoking the linearized theory for incremental motions. Numerical examples are finally considered to show the tunability of wave propagation behavior in the soft PC cylinder. The outstanding performance regarding the band gap (BG) property of the proposed soft dielectric PC is clearly demonstrated by comparing with the conventional design adopting the hard piezoelectric material. Note that soft dielectric PCs are susceptible to various kinds of failure (buckling, electromechanical instability, electric breakdown, etc.), imposing corresponding limits on the external stimuli.

cond-mat.soft↗

Electrostatically tunable small-amplitude free vibrations of pressurized electro-active spherical balloons

Designing tunable resonators is of practical importance in active/adaptive sound generation, noise control, vibration isolation and damping. In this paper, we propose to exploit the biasing fields (induced by internal pressure and radial electric voltage) to tune the three-dimensional and small-amplitude free vibration of a thick-walled soft electro-active (SEA) spherical balloon. The incompressible isotropic SEA balloon is characterized by both neo-Hookean and Gent ideal dielectric models. The equations governing small-amplitude vibrations under inhomogeneous biasing fields can be linearized and solved in spherical coordinates using the state-space formalism, which establishes two separate transfer relations correlating the state vectors at the inner surface with those at the outer surface of the SEA balloon. By imposing the mechanical and electric boundary conditions, two separate analytical frequency equations are derived, which characterize two independent classes of vibration for torsional and spheroidal modes, respectively. Numerical examples are finally conducted to validate the theoretical derivation as well as to investigate the effects of both radial electric voltage and internal pressure on the resonant frequency of the SEA balloon. The reported analytical solution is truly and fully three-dimensional, covering from the purely radial breathing mode to torsional mode to any general spheroidal mode, and hence provides a more accurate prediction of the vibration characteristics of tunable resonant devices that incorporate the SEA spherical balloon as the tuning element.

cond-mat.soft↗

On propagation of axisymmetric waves in pressurized functionally graded elastomeric hollow cylinders

Soft materials can be designed with a functionally graded (FG) property for specific applications. In this paper, we analyze the axisymmetric guided wave propagation in a pressurized FG elastomeric hollow cylinder. The cylinder is subjected to a combined action of axial pre-stretch and pressure difference applied to the inner and outer cylindrical surfaces. We consider both torsional waves and longitudinal waves propagating in the FG cylinder made of incompressible isotropic elastomer, which is characterized by the Mooney-Rivlin strain energy function but with the material parameters varying with the radial coordinate in an affine way. The pressure difference generates an inhomogeneous deformation field in the FG cylinder, which dramatically complicates the superimposed wave problem described by the small-on-large theory. A particularly efficient approach is hence employed which combines the state-space formalism for the incremental wave motion with the approximate laminate or multi-layer technique. Dispersion relations for the two types of axisymmetric guided waves are then derived analytically. The accuracy and convergence of the proposed approach is validated numerically. The effects of the pressure difference, material gradient, and axial pre-stretch on both the torsional and the longitudinal wave propagation characteristics are discussed in detail through numerical examples. It is found that the frequency of axisymmetric waves depends nonlinearly on the pressure difference and the material gradient, and an increase in the material gradient enhances the capability of the pressure difference to adjust the wave behavior in the FG cylinder.

cond-mat.soft↗

Low-frequency tunable topological interface states in soft phononic crystal cylinders

Topological phononic crystals have attracted intensive attention due to their peculiar topologically protected interface or edge states. Their operating frequency, however, is generally fixed once designed and fabricated. Here, we propose to overcome this limitation by utilizing soft topological phononic crystals. In particular, we design a simple one-dimensional periodic system of soft cylindrical waveguides to realize mechanically tunable topological interface states for longitudinal waves. To this end, we employ the nonlinear elasticity theory and its linearized incremental version to fully account for both geometric and material nonlinearities of the system. We derive the dispersion relation for small-amplitude longitudinal motions superimposed on the finitely deformed state. In addition, our analytical results provide information about the corresponding Bloch wave modes, displacement field distributions, and signal transmission coefficients for finite cylindrical waveguides with identical or various unit-cell topologies. Our numerical results illustrate the low-frequency topological interface state occurring at the interface between two topologically distinct soft phononic cylinders. Moreover, we show that the corresponding frequency in the overlapped band gap can be continuously adjusted by an external force. This analytical result is also validated by the finite element simulations. Finally, we provide the topological phase diagrams to demonstrate the tunable position and existence condition of the topological interface states when tuning the external loading. The low-frequency tunable topological interface states with remarkable field enhancement may find a wide range of potential applications such as tunable energy harvesters, low-pass filters and high-sensitivity detectors for biomedical applications.

cond-mat.soft↗

Factorization and transverse phase-space parton distributions

We first revisit impact-parameter dependent collisions of ultra-relativistic particles in quantum field theory. Two conditions sufficient for defining an impact-parameter dependent cross section are given, which could be violated in proton-proton collisions. By imposing these conditions, a general formula for the impact-parameter dependent cross section is derived. Then, using soft-collinear effective theory, we derive a factorization formula for the impact-parameter dependent cross section for inclusive hard processes with only colorless final-state products in hadron and nuclear collisions. It entails defining thickness beam functions, which are Fourier transforms of transverse phase-space parton distribution functions. By modelling non-perturbative modes in thickness beam functions of large nuclei in heavy-ion collisions, the factorization formula confirms the cross section in the Glauber model for hard processes. Besides, the factorization formula is verified up to one loop in perturbative QCD for the inclusive Drell-Yan process in quark-antiquark collisions at a finite impact parameter.

hep-ph↗

Relation-aware Hierarchical Attention Framework for Video Question Answering

Video Question Answering (VideoQA) is a challenging video understanding task since it requires a deep understanding of both question and video. Previous studies mainly focus on extracting sophisticated visual and language embeddings, fusing them by delicate hand-crafted networks. However, the relevance of different frames, objects, and modalities to the question are varied along with the time, which is ignored in most of existing methods. Lacking understanding of the the dynamic relationships and interactions among objects brings a great challenge to VideoQA task. To address this problem, we propose a novel Relation-aware Hierarchical Attention (RHA) framework to learn both the static and dynamic relations of the objects in videos. In particular, videos and questions are embedded by pre-trained models firstly to obtain the visual and textual features. Then a graph-based relation encoder is utilized to extract the static relationship between visual objects. To capture the dynamic changes of multimodal objects in different video frames, we consider the temporal, spatial, and semantic relations, and fuse the multimodal features by hierarchical attention mechanism to predict the answer. We conduct extensive experiments on a large scale VideoQA dataset, and the experimental results demonstrate that our RHA outperforms the state-of-the-art methods.

cs.CV↗

Coherence Scaling of Noisy Second-Order Scale-Free Consensus Networks

A striking discovery in the field of network science is that the majority of real networked systems have some universal structural properties. In generally, they are simultaneously sparse, scale-free, small-world, and loopy. In this paper, we investigate the second-order consensus of dynamic networks with such universal structures subject to white noise at vertices. We focus on the network coherence $H_{\rm SO}$ characterized in terms of the $\mathcal{H}_2$-norm of the vertex systems, which measures the mean deviation of vertex states from their average value. We first study numerically the coherence of some representative real-world networks. We find that their coherence $H_{\rm SO}$ scales sublinearly with the vertex number $N$. We then study analytically $H_{\rm SO}$ for a class of iteratively growing networks -- pseudofractal scale-free webs (PSFWs), and obtain an exact solution to $H_{\rm SO}$, which also increases sublinearly in $N$, with an exponent much smaller than 1. To explain the reasons for this sublinear behavior, we finally study $H_{\rm SO}$ for Sierpinśki gaskets, for which $H_{\rm SO}$ grows superlinearly in $N$, with a power exponent much larger than 1. Sierpinśki gaskets have the same number of vertices and edges as the PSFWs, but do not display the scale-free and small-world properties. We thus conclude that the scale-free and small-world, and loopy topologies are jointly responsible for the observed sublinear scaling of $H_{\rm SO}$.

math.NA↗

Frame Aggregation and Multi-Modal Fusion Framework for Video-Based Person Recognition

Video-based person recognition is challenging due to persons being blocked and blurred, and the variation of shooting angle. Previous research always focused on person recognition on still images, ignoring similarity and continuity between video frames. To tackle the challenges above, we propose a novel Frame Aggregation and Multi-Modal Fusion (FAMF) framework for video-based person recognition, which aggregates face features and incorporates them with multi-modal information to identify persons in videos. For frame aggregation, we propose a novel trainable layer based on NetVLAD (named AttentionVLAD), which takes arbitrary number of features as input and computes a fixed-length aggregation feature based on feature quality. We show that introducing an attention mechanism to NetVLAD can effectively decrease the impact of low-quality frames. For the multi-model information of videos, we propose a Multi-Layer Multi-Modal Attention (MLMA) module to learn the correlation of multi-modality by adaptively updating Gram matrix. Experimental results on iQIYI-VID-2019 dataset show that our framework outperforms other state-of-the-art methods.

cs.CV↗

Diagnosis inspired by the thermodynamic geometry for different thermodynamic schemes of the charged BTZ black hole

Due to the asymptotic structure of the black hole solution, there are two different thermodynamic schemes for the charged Banados-Teitelboim-Zanelli (BTZ) black hole. In one scheme, the charged BTZ black hole is super-entropic, while in the other, it is not (the reverse isoperimetric inequality is saturated). In this paper, we investigate the thermodynamic curvature of the charged BTZ black hole in different coordinate spaces. We find that in both schemes, the thermodynamic curvature is always positive, which may be related to the information of repulsive interaction between black hole molecules for the charged BTZ black hole if we accept an empirical relationship between the thermodynamic curvature and interaction of a system. More importantly, we provide a diagnosis for the discrimination of the two schemes from the point of view of the thermodynamics geometry. For the charged BTZ black hole, when the reverse isoperimetric inequality is saturated, the thermodynamic curvature of an extreme black hole tends to be infinity, while when the reverse isoperimetric inequality is violated, the thermodynamic curvature of the extreme black hole goes to a finite value.

gr-qc↗

Alternating minimization for a single step TV-Stokes model for image denoising

The paper presents a fully coupled TV-Stokes model, and propose an algorithm based on alternating minimization of the objective functional whose first iteration is exactly the modified TV-Stokes model proposed earlier. The model is a generalization of the second order Total Generalized Variation model. A convergence analysis is given.

math.NA↗

A new measure of thermal micro-behavior for the AdS black hole

Inspired by the hypothesis of the black hole molecule, with the help of the Hawking temperature, entropy and the thermodynamics curvature of the black hole, we propose a new measure of the relation between the interaction and the thermal motion of molecules of the AdS black hole as a preliminary and coarse-grained description. The measure enables us to introduce a dimensionless ratio to characterize this relation and show that there is indeed competition between the interaction among black hole molecules and their thermal motion. For the charged AdS black hole, below the critical dimensionless pressure, there are three transitions between the interaction state and the thermal motion state. While above the critical dimensionless pressure, there is only one transition. For the Schwarzschild-AdS black hole and five-dimensional Gauss-Bonnet AdS black hole, there is always a transition between the interaction state and the thermal motion state.

gr-qc↗

Multidimensional TV-Stokes for image processing

A complete multidimential TV-Stokes model is proposed based on smoothing a gradient field in the first step and reconstruction of the multidimensional image from the gradient field. It is the correct extension of the original two dimensional TV-Stokes to multidimensions. Numerical algorithm using the Chambolle's semi-implicit dual formula is proposed. Numerical results applied to denoising 3D images and movies are presented. They show excellent performance in avoiding the staircase effect, and preserving fine structures.

math.NA↗

Sparse-data based 3D surface reconstruction with vector matching

Three dimensional surface reconstruction based on two dimensional sparse information in the form of only a small number of level lines of the surface with moderately complex structures, containing both structured and unstructured geometries, is considered in this paper. A new model has been proposed which is based on the idea of using normal vector matching combined with a first order and a second order total variation regularizers. A fast algorithm based on the augmented Lagrangian is also proposed. Numerical experiments are provided showing the effectiveness of the model and the algorithm in reconstructing surfaces with detailed features and complex structures for both synthetic and real world digital maps.

math.NA↗

Iterative regularization algorithms for image denoising with the TV-Stokes model

We propose a set of iterative regularization algorithms for the TV-Stokes model to restore images from noisy images with Gaussian noise. These are some extensions of the iterative regularization algorithm proposed for the classical Rudin-Osher-Fatemi (ROF) model for image reconstruction, a single step model involving a scalar field smoothing, to the TV-Stokes model for image reconstruction, a two steps model involving a vector field smoothing in the first and a scalar field smoothing in the second. The iterative regularization algorithms proposed here are Richardson's iteration like. We have experimental results that show improvement over the original method in the quality of the restored image. Convergence analysis and numerical experiments are presented.

math.NA↗

Early Time Dynamics and the Bulk

Deciphering the origin of collective phenomena in small colliding systems is one of contemporary focuses in heavy-ion physics. It entails penetrating the barrier between two previously separated research topics: thermalization/hydrodynamization and phenomenological studies of collectivity. I first review some recent progress in understanding thermalization/hydrodynamization in large colliding systems, centralized on bottom-up thermalization. Then, using a simple kinetic theory I demonstrate how the investigation of hydrodynamization is intertwined with the study of flow in small colliding systems. Connections of these studies to "hard probes" are also commented where possible.

hep-ph↗