Searcharxiv⌕ Search

arXiv subjects

Bo Ai

Publications and source records attributed to Bo Ai.

At least 181 records · Page 10Linked to original sources

Flexible-Position MIMO for Wireless Communications: Fundamentals, Challenges, and Future Directions

The flexible-position multiple-input multiple-output (FLP-MIMO), such as fluid antennas and movable antennas, is a promising technology for future wireless communications. This is due to the fact that the positions of antennas at the transceiver and reflector can be dynamically optimized to achieve better channel conditions and, as such, can provide high spectral efficiency (SE) and energy efficiency (EE) gains with fewer antennas. In this article, we introduce the fundamentals of FLP-MIMO systems, including hardware design, structure design, and potential applications. We shall demonstrate that FLP-MIMO, using fewer flexible antennas, can match the channel hardening achieved by a large number of fixed antennas. We will then analyze the SE-EE relationship for FLP-MIMO and fixed-position MIMO. Furthermore, we will design the optimal trajectory of flexible antennas to maximize system sum SE or total EE at a fixed travel distance of each antenna. Finally, several important research directions regarding FLP-MIMO communications are presented to facilitate further investigation.

cs.IT↗

Sum Rate Maximization under AoI Constraints for RIS-Assisted mmWave Communications

The concept of age of information (AoI) has been proposed to quantify information freshness, which is crucial for time-sensitive applications. However, in millimeter wave (mmWave) communication systems, the link blockage caused by obstacles and the severe path loss greatly impair the freshness of information received by the user equipments (UEs). In this paper, we focus on reconfigurable intelligent surface (RIS)-assisted mmWave communications, where beamforming is performed at transceivers to provide directional beam gain and a RIS is deployed to combat link blockage. We aim to maximize the system sum rate while satisfying the information freshness requirements of UEs by jointly optimizing the beamforming at transceivers, the discrete RIS reflection coefficients, and the UE scheduling strategy. To facilitate a practical solution, we decompose the problem into two subproblems. For the first per-UE data rate maximization problem, we further decompose it into a beamforming optimization subproblem and a RIS reflection coefficient optimization subproblem. Considering the difficulty of channel estimation, we utilize the hierarchical search method for the former and the local search method for the latter, and then adopt the block coordinate descent (BCD) method to alternately solve them. For the second scheduling strategy design problem, a low-complexity heuristic scheduling algorithm is designed. Simulation results show that the proposed algorithm can effectively improve the system sum rate while satisfying the information freshness requirements of all UEs.

cs.IT↗

GNN-Based Beamforming for Sum-Rate Maximization in MU-MISO Networks

The advantages of graph neural networks (GNNs) in leveraging the graph topology of wireless networks have drawn increasing attentions. This paper studies the GNN-based learning approach for the sum-rate maximization in multiple-user multiple-input single-output (MU-MISO) networks subject to the users' individual data rate requirements and the power budget of the base station. By modeling the MU-MISO network as a graph, a GNN-based architecture named CRGAT is proposed to directly map the channel state information to the beamforming vectors. The attention-enabled aggregation and the residual-assisted combination are adopted to enhance the learning capability and avoid the oversmoothing issue. Furthermore, a novel activation function is proposed for the constraint due to the limited power budget at the base station. The CRGAT is trained in an unsupervised learning manner with two proposed loss functions. An evaluation method is proposed for the learning-based approach, based on which the effectiveness of the proposed CRGAT is validated in comparison with several convex optimization and learning based approaches. Numerical results are provided to reveal the advantages of the CRGAT including the millisecond-level response with limited optimality performance loss, the scalability to different number of users and power budgets, and the adaptability to different system settings.

eess.SY↗

Reconfigurable Intelligent Surface Assisted High-Speed Train Communications: Coverage Performance Analysis and Placement Optimization

Reconfigurable intelligent surface (RIS) emerges as an efficient and promising technology for the next wireless generation networks and has attracted a lot of attention owing to the capability of extending wireless coverage by reflecting signals toward targeted receivers. In this paper, we consider a RIS-assisted high-speed train (HST) communication system to enhance wireless coverage and improve coverage probability. First, coverage performance of the downlink single-input-single-output system is investigated, and the closed-form expression of coverage probability is derived. Moreover, travel distance maximization problem is formulated to facilitate RIS discrete phase design and RIS placement optimization, which is subject to coverage probability constraint. Simulation results validate that better coverage performance and higher travel distance can be achieved with deployment of RIS. The impacts of some key system parameters including transmission power, signal-to-noise ratio threshold, number of RIS elements, number of RIS quantization bits, horizontal distance between base station and RIS, and speed of HST on system performance are investigated. In addition, it is found that RIS can well improve coverage probability with limited power consumption for HST communications.

cs.IT↗

Rate Compatible LDPC Neural Decoding Network: A Multi-Task Learning Approach

Deep learning based decoding networks have shown significant improvement in decoding LDPC codes, but the neural decoders are limited by rate-matching operations such as puncturing or extending, thus needing to train multiple decoders with different code rates for a variety of channel conditions. In this correspondence, we propose a Multi-Task Learning based rate-compatible LDPC ecoding network, which utilizes the structure of raptor-like LDPC codes and can deal with multiple code rates. In the proposed network, different portions of parameters are activated to deal with distinct code rates, which leads to parameter sharing among tasks. Numerical experiments demonstrate the effectiveness of the proposed method. Training the specially designed network under multiple code rates makes the decoder compatible with multiple code rates without sacrificing frame error rate performance.

eess.SP↗

Cell-Free XL-MIMO Meets Multi-Agent Reinforcement Learning: Architectures, Challenges, and Future Directions

Cell-free massive multiple-input multiple-output (mMIMO) and extremely large-scale MIMO (XL-MIMO) are regarded as promising innovations for the forthcoming generation of wireless communication systems. Their significant advantages in augmenting the number of degrees of freedom have garnered considerable interest. In this article, we first review the essential opportunities and challenges induced by XL-MIMO systems. We then propose the enhanced paradigm of cell-free XL-MIMO, which incorporates multi-agent reinforcement learning (MARL) to provide a distributed strategy for tackling the problem of high-dimension signal processing and costly energy consumption. Based on the unique near-field characteristics, we propose two categories of the low-complexity design, i.e., antenna selection and power control, to adapt to different cell-free XL-MIMO scenarios and achieve the maximum data rate. For inspiration, several critical future research directions pertaining to green cell-free XL-MIMO systems are presented.

cs.IT↗

Double-Layer Power Control for Mobile Cell-Free XL-MIMO with Multi-Agent Reinforcement Learning

Cell-free (CF) extremely large-scale multiple-input multiple-output (XL-MIMO) is regarded as a promising technology for enabling future wireless communication systems. Significant attention has been generated by its considerable advantages in augmenting degrees of freedom. In this paper, we first investigate a CF XL-MIMO system with base stations equipped with XL-MIMO panels under a dynamic environment. Then, we propose an innovative multi-agent reinforcement learning (MARL)-based power control algorithm that incorporates predictive management and distributed optimization architecture, which provides a dynamic strategy for addressing high-dimension signal processing problems. Specifically, we compare various MARL-based algorithms, which shows that the proposed MARL-based algorithm effectively strikes a balance between spectral efficiency (SE) performance and convergence time. Moreover, we consider a double-layer power control architecture based on the large-scale fading coefficients between antennas to suppress interference within dynamic systems. Compared to the single-layer architecture, the results obtained unveil that the proposed double-layer architecture has a nearly24% SE performance improvement, especially with massive antennas and smaller antenna spacing.

cs.IT↗

A Comprehensive Study of PAPR Reduction Techniques for Deep Joint Source Channel Coding in OFDM Systems

Recently, deep joint source channel coding (DJSCC) techniques have been extensively studied and have shown significant performance with limited bandwidth and low signal to noise ratio. Most DJSCC work considers discrete-time analog transmission, while combining it with orthogonal frequency division multiplexing (OFDM) creates serious high peak-to-average power ratio (PAPR) problem. This paper conducts a comprehensive analysis on the use of various OFDM PAPR reduction techniques in the DJSCC system, including both conventional techniques such as clipping, companding, SLM and PTS, and deep learning-based PAPR reduction techniques such as PAPR loss and clipping with retraining. Our investigation shows that although conventional PAPR reduction techniques can be applied to DJSCC, their performance in DJSCC is different from the conventional split source channel coding. Moreover, we observe that for signal distortion PAPR reduction techniques, clipping with retraining achieves the best performance in terms of both PAPR reduction and recovery accuracy. It is also noticed that signal non-distortion PAPR reduction techniques can successfully reduce the PAPR in DJSCC without compromise to signal reconstruction.

eess.SP↗

A Switch Architecture for Time-Triggered Transmission with Best-Effort Delivery

In Time-Triggered (TT) or time-sensitive networks, the transmission of a TT frame is required to be scheduled at a precise time instant for industrial distributed real-time control systems. Other (or {\em best-effort} (BE)) frames are forwarded in a BE manner. Under this scheduling strategy, the transmission of a TT frame must wait until its scheduled instant even if it could have been transmitted sooner. On the other hand, BE frames are transmitted whenever possible but may miss deadlines or may even be dropped due to congestion. As a result, TT transmission and BE delivery are incompatible with each other. To remedy this incompatibility, we propose a synergistic switch architecture (SWA) for TT transmission with BE delivery to dynamically improve the end-to-end (e2e) latency of TT frames by opportunistically exploiting BE delivery. Given a TT frame, the SWA generates and transmits a cloned copy with BE delivery. The first frame arriving at the receiver device is delivered with a configured jitter and the other copy ignored. So, the SWA achieves shorter latency and controllable jitter, the best of both worlds. We have implemented SWA using FPGAs in an industry-strength TT switches and used four test scenarios to demonstrate SWA's improvements of e2e latency and controllable jitter over the state-of-the-art TT transmission scheme.

cs.NI↗

Generative AI-aided Joint Training-free Secure Semantic Communications via Multi-modal Prompts

Semantic communication (SemCom) holds promise for reducing network resource consumption while achieving the communications goal. However, the computational overheads in jointly training semantic encoders and decoders-and the subsequent deployment in network devices-are overlooked. Recent advances in Generative artificial intelligence (GAI) offer a potential solution. The robust learning abilities of GAI models indicate that semantic decoders can reconstruct source messages using a limited amount of semantic information, e.g., prompts, without joint training with the semantic encoder. A notable challenge, however, is the instability introduced by GAI's diverse generation ability. This instability, evident in outputs like text-generated images, limits the direct application of GAI in scenarios demanding accurate message recovery, such as face image transmission. To solve the above problems, this paper proposes a GAI-aided SemCom system with multi-model prompts for accurate content decoding. Moreover, in response to security concerns, we introduce the application of covert communications aided by a friendly jammer. The system jointly optimizes the diffusion step, jamming, and transmitting power with the aid of the generative diffusion models, enabling successful and secure transmission of the source messages.

eess.IV↗

Channel Estimation for XL-MIMO Systems with Polar-Domain Multi-Scale Residual Dense Network

Extremely large-scale multiple-input multiple-output (XL-MIMO) is a promising technique to enable versatile applications for future wireless communications.To realize the huge potential performance gain, accurate channel state information is a fundamental technical prerequisite. In conventional massive MIMO, the channel is often modeled by the far-field planar-wavefront with rich sparsity in the angular domain that facilitates the design of low-complexity channel estimation. However, this sparsity is not conspicuous in XL-MIMO systems due to the non-negligible near-field spherical-wavefront. To address the inherent performance loss of the angular-domain channel estimation schemes, we first propose the polar-domain multiple residual dense network (P-MRDN) for XL-MIMO systems based on the polar-domain sparsity of the near-field channel by improving the existing MRDN scheme. Furthermore, a polar-domain multi-scale residual dense network (P-MSRDN) is designed to improve the channel estimation accuracy. Finally, simulation results reveal the superior performance of the proposed schemes compared with existing benchmark schemes and the minimal influence of the channel sparsity on the proposed schemes.

cs.IT↗

Rate-Splitting for CF Massive MIMO Systems With Channel Aging

The cell-free (CF) massive multiple-input multiple-output (MIMO) system is considered a cutting-edge technology in next-generation mobile communication due to its ability to provide high-performance coverage seamlessly and uniformly. This paper aims to mitigate the negative impact of channel aging due to the movement of user equipment in CF massive MIMO systems by utilizing rate-splitting (RS) technology. Taking into account the outdated channel state information, we obtain the achievable sum spectral efficiency (SE) of the RS-assisted CF massive MIMO system, where the private messages can directly adopt conventional maximum ratio, local minimum mean square error (MMSE), and centralized MMSE precoding schemes. Moreover, we propose a bisection-based precoding scheme that maximizes the minimum SE of common messages, which outperforms the superposition-based and random precoding schemes and exhibits strong robustness in complex mobile scenarios. Furthermore, we derive a novel closed-form sum SE expression for the considered system. The results demonstrate that RS technology can mitigate interference in mobile CF massive MIMO systems, improving overall system performance.

cs.IT↗

QoS-aware User Association and Transmission Scheduling for Millimeter-Wave Train-ground Communications

With the development of wireless communication, people have put forward higher requirements for train-ground communications in the high-speed railway (HSR) scenarios. With the help of mobile relays (MRs) installed on the roof of the train, the application of Millimeter-Wave (mm-wave) communication which has rich spectrum resources to the train-ground communication system can realize high data rate, so as to meet users' increasing demand for broad-band multimedia access. Also, full-duplex (FD) technology can theoretically double the spectral efficiency. In this paper, we formulate the user association and transmission scheduling problem in the mm-wave train-ground communication system with MR operating in the FD mode as a nonlinear programming problem. In order to maximize the system throughput and the number of users meeting quality of service (QoS) requirements, we propose an algorithm based on coalition game to solve the challenging NP-hard problem, and also prove the convergence and Nash-stable structure of the proposed algorithm. Extensive simulation results demonstrate that the proposed coalition game based algorithm can effectively improve the system throughput and meet the QoS requirements of as many users as possible, so that the communication system has a certain QoS awareness.

cs.IT↗

Robust Train-to-Train Transmission Scheduling in mmWave Band for High Speed Train Communication Systems

Demands for data traffic in high-speed railway (HSR) has increased drastically. The increasing entertainment needs of passengers, safety control information exchanges of trains, etc., make train-to-train (T2T) communications face the challenge of achieving high-capacity and high-quality data transmissions. In order to greatly increase the communication capacity, it is urgent to introduce millimeter wave (mmWave) technology. Faced with the problem that mmWave link is easy to be blocked, this paper leverages the existing equipment to assist relay, and proposes an effective transmission scheduling scheme to improve the robustness of T2T communication systems. First of all, we formulate a mixed integer nonlinear programming (MINLP) optimization problem the transmission scheduling in T2T communication systems where mobile relays (MRs) are all working in the full-duplex (FD) mode. Then we propose a low complexity heuristic algorithm to solve the optimization problem, which consists of three components: relay selection, transmission mode selection, and transmission scheduling. The simulation results show that the proposed algorithm can greatly improve the number of completed flows and system throughput. Finally, we analyze the influence of different design parameters on the system performance. The results show that the proposed algorithm can achieve more data flows and system throughput within a reasonable communication distance threshold in T2T communication with obstacles in different orbits. It can balance the computational complexity and system performance to achieve an efficient and robust data transmission.

cs.IT↗

RIS-assisted High-Speed Railway Integrated Sensing and Communication System

One technology that has the potential to improve wireless communications in years to come is integrated sensing and communication (ISAC). In this study, we take advantage of reconfigurable intelligent surface's (RIS) potential advantages to achieve ISAC while using the same frequency and resources. Specifically, by using the reflecting elements, the RIS dynamically modifies the radio waves' strength or phase in order to change the environment for radio transmission and increase the ISAC systems' transmission rate. We investigate a single cell downlink communication situation with RIS assistance. Combining the ISAC base station's (BS) beamforming with RIS's discrete phase shift optimization, while guaranteeing the sensing signal, The aim of optimizing the sum rate is specified. We take advantage of alternating maximization to find practical solutions with dividing the challenge into two minor issues. The first power allocation subproblem is non-convex that CVX solves by converting it to convex. A local search strategy is used to solve the second subproblem of phase shift optimization. According to the results of the simulation, using RIS with adjusted phase shifts can significantly enhance the ISAC system's performance.

eess.SP↗

Joint User Association and Transmission Scheduling in Integrated mmWave Access and Terahertz Backhaul Networks

Terahertz wireless backhaul is expected to meet the high-speed backhaul requirements of future ultra-dense networks using millimeter-wave (mmWave) base stations (BSs). In order to achieve higher network capacity with limited resources and meet the quality of service (QoS) requirements of more users in the integrated mmWave access and terahertz backhaul network, this paper formulates a problem of maximizing the number of users successfully served in both the access and backhaul links. Since the problem is a non-linear integer optimization problem, a minimum rate ratio user association and transmission scheduling algorithm is proposed to obtain a suboptimal solution. The proposed algorithm takes the minimum rate ratio as the user association criterion and schedules first the users with fewer backhaul transmission slots. In addition, the algorithm will update the number of access transmission slots allocated to users and the access scheduling results after the backhaul scheduling phase. Numerical results show that the proposed algorithm outperforms several benchmark algorithms in terms of the number of served users and system throughput, and it can cope with a large number of bursty user requests.

cs.IT↗

Joint Design of Access and Backhaul in Densely Deployed MmWave Small Cells

With the rapid growth of mobile data traffic, the shortage of radio spectrum resource has become increasingly prominent. Millimeter wave (mmWave) small cells can be densely deployed in macro cells to improve network capacity and spectrum utilization. Such a network architecture is referred to as mmWave heterogeneous cellular networks (HetNets). Compared with the traditional wired backhaul, The integrated access and backhaul (IAB) architecture with wireless backhaul is more flexible and cost-effective for mmWave HetNets. However, the imbalance of throughput between the access and backhaul links will constrain the total system throughput. Consequently, it is necessary to jointly design of radio access and backhaul link. In this paper, we study the joint optimization of user association and backhaul resource allocation in mmWave HetNets, where different mmWave bands are adopted by the access and backhaul links. Considering the non-convex and combinatorial characteristics of the optimization problem and the dynamic nature of the mmWave link, we propose a multi-agent deep reinforcement learning (MADRL) based scheme to maximize the long-term total link throughput of the network. The simulation results show that the scheme can not only adjust user association and backhaul resource allocation strategy according to the dynamics in the access link state, but also effectively improve the link throughput under different system configurations.

cs.IT↗

Joint Optimization of Resource Allocation and User Association in Multi-Frequency Cellular Networks Assisted by RIS

Due to the development of communication technology and the rise of user network demand, a reasonable resource allocation for wireless networks is the key to guaranteeing regular operation and improving system performance. Various frequency bands exist in the natural network environment, and heterogeneous cellular network (HCN) has become a hot topic for current research. Meanwhile, Reconfigurable Intelligent Surface (RIS) has become a key technology for developing next-generation wireless networks. By modifying the phase of the incident signal arriving at the RIS surface, RIS can improve the signal quality at the receiver and reduce co-channel interference. In this paper, we develop a RIS-assisted HCN model for a multi-base station (BS) multi-frequency network, which includes 4G, 5G, millimeter wave (mmwave), and terahertz networks, and considers the case of multiple network coverage users, which is more in line with the realistic network characteristics and the concept of 6G networks. We propose the optimization objective of maximizing the system sum rate, which is decomposed into two subproblems, i.e., the user resource allocation and the phase shift optimization problem of RIS components. Due to the NP-hard and coupling relationship, we use the block coordinate descent (BCD) method to alternately optimize the local solutions of the coalition game and the local discrete phase search algorithm to obtain the global solution. In contrast, most previous studies have used the coalition game algorithm to solve the resource allocation problem alone. Simulation results show that the algorithm performs better than the rest of the algorithms, effectively improves the system sum rate, and achieves performance close to the optimal solution of the traversal algorithm with low complexity.

cs.IT↗