arXiv subjects

Bo Ai

Publications and source records attributed to Bo Ai.

At least 271 records · Page 15Linked to original sources

arXiv2021

Radio Communication Scenarios in 5G-Railways

With the rapid development of railways, especially high-speed railways, there is an increasingly urgent demand for new wireless communication system for railways. Taking the mature 5G technology as an opportunity, 5G-railways (5G-R) have been widely regarded as a solution to meet the diversified demands of railway wireless communications. For the design, deployment and improvement of 5G-R networks, radio communication scenario classification plays an important role, affecting channel modeling and system performance evaluation. In this paper, a standardized radio communication scenario classification, including 18 scenarios, is proposed for 5G-R. This paper analyzes the differences of 5G-R scenarios compared with the traditional cellular networks and GSM-railways, according to 5G-R requirements and the unique physical environment and propagation characteristics. The proposed standardized scenario classification helps deepen the research of 5G-R and promote the development and application of the existing advanced technologies in railways.

cs.NI↗

arXiv2021

RIS-Aided Next-Generation High-Speed Train Communications: Challenges, Solutions, and Future Directions

High-speed train (HST) communication is a very challenging scenario in wireless communication systems due to its fast time-varying channels and significant penetration loss. Thanks to the low cost and smart channel reconfiguration ability, reconfigurable intelligent surface (RIS) has been proposed as a promising technology to solve the aforementioned challenges cost-effectively and to achieve high spectral and energy-efficiency in the next-generation HST communication systems. In this article, we first provide a novel RIS-aided HST wireless communication paradigm, including its main challenges and application scenarios. Then, we propose practical solutions are provided to realize efficient signal processing and resource management in the considered system. Finally, future directions of RIS-aided HST communication systems are pointed out to inspire further investigation in future work.

cs.IT↗

arXiv2021

Coalition Game Based Full-duplex Popular Content Distribution in mmWave Vehicular Networks

The millimeter wave (mmWave) communication has drawn intensive attention with abundant band resources. In this paper, we consider the popular content distribution (PCD) problem in the mmWave vehicular network. In order to offload the communication burden of base stations (BSs), vehicle-to-vehicle (V2V) communication is introduced into the PCD problem to transmit contents between on-board units (OBUs) and improve the transmission efficiency. We propose a full-duplex (FD) cooperative scheme based on coalition formation game, and the utility function is provided based on the maximization of the number of received contents. The contribution of each member in the coalition can be transferable to its individual profit. While maximizing the number of received contents in the fixed time, the cooperative scheme also ensures the individual profit of each OBU in the coalition. We evaluate the proposed scheme by extensive simulations in mmWave vehicular networks. Compared with other existing schemes, the proposed scheme has superior performances on the number of possessed contents and system fairness. Besides, the low complexity of the proposed algorithm is demonstrated by the switch operation number and CPU time.

cs.IT↗

arXiv2020

Secrecy Performance of Body-Centric Communications over Alternate Rician Shadowed Fading Channels

In this paper, we investigate the physical layer security over the Alternate Rician Shadowed fading channel, which is a novel channel model for body-centric wireless links and land mobile satellite. We derive exact closed-form expressions for the average secrecy capacity (ASC), secrecy outage probability (SOP), and probability of non-zero secrecy capacity (PNZ) for two cases: (i) m is a positive real number and (ii) m is a positive integer number, where m describes the level of fluctuation of the line-of-sight component. In the first case, SOP is derived in terms of the Meijer's G-function, while ASC and PNZ are derived in terms of the multivariate Fox's H-function. In the second case, ASC is derived in terms of the Meijer's G-function, while SOP and PNZ are derived in terms of elementary functions. In addition, we derive the asymptotic ASC, SOP and PNZ expressions which all match well the exact ones at high values of signal-to-noise ratio, respectively. The capacity slope of asymptotic ASC and the secrecy diversity order of asymptotic SOP have been derived for providing more physical insights. Finally, the accuracy of our derived expressions is validated by Monte-Carlo simulations.

cs.IT↗

arXiv2020

Millimeter Wave Communications With Reconfigurable Intelligent Surface: Performance Analysis and Optimization

Reconfigurable Intelligent Surface (RIS) can create favorable multipath to establish strong links that are useful in millimeter wave (mmWave) communications. While previous works used Rayleigh or Rician fading, we use the fluctuating two-ray (FTR) distribution to model the small-scale fading in mmWave frequency. First, we obtain the statistical characterizations of the product of independent FTR random variables (RVs) and the sum of product of FTR RVs. For the RIS-aided and amplify-and-forward (AF) relay systems, we derive exact end-to-end signal-to-noise ratio (SNR) expressions. To maximize the end-to-end SNR, we propose a novel and simple way to obtain the optimal phase shifts at the RIS elements. The optimal power allocation scheme for the AF relay system is also proposed. Furthermore, we evaluate important performance metrics including the outage probability and the average bit error probability. To validate the accuracy of our analytical results, Monte-Carlo simulations are subsequently conducted to provide interesting insights. It is found that the RIS-aided system can achieve the same performance as the AF relay system with low transmit power. More interestingly, as the channel conditions improve, the RIS-aided system can outperform the AF relay system having the same transmit power with a smaller number of reflecting elements.

cs.IT↗

arXiv2020

Solving Sparse Linear Inverse Problems in Communication Systems: A Deep Learning Approach With Adaptive Depth

Sparse signal recovery problems from noisy linear measurements appear in many areas of wireless communications. In recent years, deep learning (DL) based approaches have attracted interests of researchers to solve the sparse linear inverse problem by unfolding iterative algorithms as neural networks. Typically, research concerning DL assume a fixed number of network layers. However, it ignores a key character in traditional iterative algorithms, where the number of iterations required for convergence changes with varying sparsity levels. By investigating on the projected gradient descent, we unveil the drawbacks of the existing DL methods with fixed depth. Then we propose an end-to-end trainable DL architecture, which involves an extra halting score at each layer. Therefore, the proposed method learns how many layers to execute to emit an output, and the network depth is dynamically adjusted for each task in the inference phase. We conduct experiments using both synthetic data and applications including random access in massive MTC and massive MIMO channel estimation, and the results demonstrate the improved efficiency for the proposed approach.

eess.SP↗

arXiv2020

Deep Transfer Learning Based Downlink Channel Prediction for FDD Massive MIMO Systems

Artificial intelligence (AI) based downlink channel state information (CSI) prediction for frequency division duplexing (FDD) massive multiple-input multiple-output (MIMO) systems has attracted growing attention recently. However, existing works focus on the downlink CSI prediction for the users under a given environment and is hard to adapt to users in new environment especially when labeled data is limited. To address this issue, we formulate the downlink channel prediction as a deep transfer learning (DTL) problem, where each learning task aims to predict the downlink CSI from the uplink CSI for one single environment. Specifically, we develop the direct-transfer algorithm based on the fully-connected neural network architecture, where the network is trained on the data from all previous environments in the manner of classical deep learning and is then fine-tuned for new environments. To further improve the transfer efficiency, we propose the meta-learning algorithm that trains the network by alternating inner-task and across-task updates and then adapts to a new environment with a small number of labeled data. Simulation results show that the direct-transfer algorithm achieves better performance than the deep learning algorithm, which implies that the transfer learning benefits the downlink channel prediction in new environments. Moreover, the meta-learning algorithm significantly outperforms the direct-transfer algorithm in terms of both prediction accuracy and stability, which validates its effectiveness and superiority.

cs.IT↗

arXiv2020

Cell-Free Massive MIMO with Channel Aging and Pilot Contamination

In this paper, we investigate the impact of channel aging on the performance of cell-free (CF) massive multiple-input multiple-output (MIMO) systems with pilot contamination. To take into account the channel aging effect due to user mobility, we first compute a channel estimate. We use it to derive novel closed-form expressions for the uplink spectral efficiency (SE) of CF massive MIMO systems with large-scale fading decoding and matched-filter receiver cooperation. The performance of a small-cell system is derived for comparison. It is found that CF massive MIMO systems achieve higher 95\%-likely uplink SE in both low- and high-mobility conditions, and CF massive MIMO is more robust to channel aging. Fractional power control (FPC) is considered to compensate to limit the inter-user interference. The results show that, compared with full power transmission, the benefits of FPC are gradually weakened as the channel aging grows stronger.

cs.IT↗

arXiv2020

Reconfigurable Intelligent Surface Assisted Device-to-Device Communications

With the evolution of the 5G, 6G and beyond, device-to-device (D2D) communication has been developed as an energy-, and spectrum-efficient solution. In cellular network, D2D links need to share the same spectrum resources with the cellular link. A reconfigurable intelligent surface (RIS) can reconfigure the phase shifts of elements and create favorable beam steering, which can mitigate aggravated interference caused by D2D links. In this paper, we study a RIS-assisted single cell uplink communication network scenario, where the cellular link and multiple D2D links utilize direct propagation and reflecting one-hop propagation. The problem of maximizing the total system rate is formulated by jointly optimizing transmission powers of all links and discrete phase shifts of all elements. The formulated problem is an NP-hard mixed integer non-convex non-linear problem. To obtain practical solutions, we capitalize on alternating maximization and the problem is decomposed into two sub-problems. For the power allocation, the problem is a difference of concave functions (DC) problem, which is solved with the gradient descent method. For the phase shift, a local search algorithm with lower complexity is utilized. Simulation results show that deploying RIS and optimizing the phase shifts have a significant effect on mitigating D2D network interference.

cs.IT↗

arXiv2020

Efficient Hybrid Beamforming with Anti-Blockage Design for High-Speed Railway Communications

Future railway is expected to accommodate both train operation services and passenger broadband services. The millimeter wave (mmWave) communication is a promising technology in providing multi-gigabit data rates to onboard users. However, mmWave communications suffer from severe propagation attenuation and vulnerability to blockage, which can be very challenging in high-speed railway (HSR) scenarios. In this paper, we investigate efficient hybrid beamforming (HBF) design for train-to-ground communications. First, we develop a two-stage HBF algorithm in blockage-free scenarios. In the first stage, the minimum mean square error method is adopted for optimal hybrid beamformer design with low complexity and fast convergence; in the second stage, the orthogonal matching pursuit method is utilized to approximately recover the analog and digital beamformers. Second, in blocked scenarios, we design an anti-blockage scheme by adaptively invoking the proposed HBF algorithm, which can efficiently deal with random blockages. Extensive simulation results are presented to show the sum rate performance of the proposed algorithms under various configurations, including transmission power, velocity of the train, blockage probability, etc. It is demonstrated that the proposed anti-blockage algorithm can improve the effective rate by 20% in severely-blocked scenarios while maintaining low outage probability.

cs.IT↗

arXiv2020

Structured Massive Access for Scalable Cell-Free Massive MIMO Systems

How to meet the demand for increasing number of users, higher data rates, and stringent quality-of-service (QoS) in the beyond fifth-generation (B5G) networks? Cell-free massive multiple-input multiple-output (MIMO) is considered as a promising solution, in which many wireless access points cooperate to jointly serve the users by exploiting coherent signal processing. However, there are still many unsolved practical issues in cell-free massive MIMO systems, whereof scalable massive access implementation is one of the most vital. In this paper, we propose a new framework for structured massive access in cell-free massive MIMO systems, which comprises one initial access algorithm, a partial large-scale fading decoding (P-LSFD) strategy, two pilot assignment schemes, and one fractional power control policy. New closed-form spectral efficiency (SE) expressions with maximum ratio (MR) combining are derived. The simulation results show that our proposed framework provides high SE when using local partial minimum mean-square error (LP-MMSE) and MR combining. Specifically, the proposed initial access algorithm and pilot assignment schemes outperform their corresponding benchmarks, P-LSFD achieves scalability with a negligible performance loss compared to the conventional optimal large-scale fading decoding (LSFD), and scalable fractional power control provides a controllable trade-off between user fairness and the average SE.

eess.SP↗

arXiv2020

Satellite-Terrestrial Channel Characterization in High-Speed Railway Environment at 22.6 GHz

The integration of satellite and terrestrial communication systems plays a vital role in the fifth-generation mobile communication system (5G) for the ubiquitous coverage, reliable service and flexible networking. Moreover, the millimeter wave (mmWave) communication with large bandwidth is a key enabler for 5G intelligent rail transportation. In this paper, the satellite-terrestrial channel at 22.6 GHz is characterized for a typical high-speed railway (HSR) environment. The three-dimensional model of the railway scenario is reconstructed and imported into the Cloud Ray-Tracing (CloudRT) simulation platform. Based on extensive ray-tracing simulations, the channel for the terrestrial HSR system and the satellite-terrestrial system with two weather conditions are characterized, and the interference between them are evaluated. The results of this paper can help for the design and evaluation for the satellite-terrestrial communication system enabling future intelligent rail transportation.

eess.SP↗

arXiv2020

On the Performance of Dual-Hop Systems over Mixed FSO/mmWave Fading Channels

Free-space optical (FSO) links are considered as a cost-efficient way to fill the backhaul/fronthaul connectivity gap between millimeter wave (mmWave) access networks and optical fiber based central networks. In this paper, we investigate the end-to-end performance of dual-hop mixed FSO/mmWave systems to address this combined use. The FSO link is modeled as a Gamma-Gamma fading channel using both heterodyne detection and indirect modulation/direct detection with pointing error impairments, while the mmWave link experiences the fluctuating two-ray fading. Under the assumption of both amplify-and-forward and decode-and-forward relaying, we derive novel closed-form expressions for the outage probability, average bit error probability (BER), ergodic capacity, effective capacity in terms of bivariate Fox's $H$-functions. Additionally, we discuss the diversity gain and provide other important engineering insights based on the high signal-to-noise-ratio analysis of the outage probability and the average BER. Finally, all our analytical results are verified using Monte Carlo simulations.

cs.IT↗

arXiv2020

Learning While Navigating: A Practical System Based on Variational Gaussian Process State-Space Model and Smartphone Sensory Data

We implement a wireless indoor navigation system based on the variational Gaussian process state-space model (GPSSM) with smartphone-collected WiFi received signal strength (RSS) and inertial measurement unit (IMU) readings. We adapt the existing variational GPSSM framework to wireless navigation scenarios, and provide a practical learning procedure for the variational GPSSM. The proposed system explores both the expressive power of the non-parametric Gaussian process model and its natural mechanism for integrating the state-of-the-art navigation techniques designed upon state-space model. Experimental results obtained from a real office environment validate the outstanding performance of the variational GPSSM in comparison with the traditional parametric state-space model in terms of navigation accuracy.

eess.SP↗

arXiv2019

On the Distribution of the Ratio of Products of Fisher-Snedecor $\mathcal{F}$ Random Variables and Its Applications

The Fisher-Snedecor $\mathcal{F}$ distribution has been recently proposed as a more accurate and mathematically tractable composite fading model than traditional established models in some practical cases. In this paper, we firstly derive exact closed-form expressions for the main statistical characterizations of the ratio of products of $\mathcal{F}$-distributed random variables, including the probability density function, the cumulative distribution function and the moment generating function. Secondly, simple and tight approximations to the distribution of products and ratio of products of $\mathcal{F}$-distributed random variables are presented. These analytical results can be readily employed to evaluate the performance of several emerging system configurations, including full-duplex relaying systems operating in the presence of co-channel interference and wireless communication systems enhanced with physical-layer security. The proposed mathematical analysis is substantiated by numerically evaluated results, accompanied by equivalent ones obtained using Monte Carlo simulations.

cs.IT↗

arXiv2019

Distribution of the Sum of Fisher-Snedecor $\mathcal{F}$ Random Variables and Its Applications

The statistical characterization of the sum of random variables (RVs) are useful for investigating the performance of wireless communication systems. We derive exact closed-form expressions for the probability density function (PDF) and cumulative distribution function (CDF) of a sum of independent but not identically distributed (i.n.i.d.) Fisher-Snedecor $\mathcal{F}$ RVs. Both PDF and CDF are given in terms of the multivariate Fox's $H$-function. Besides, a simple and accurate approximation to the sum of i.n.i.d. Fisher-Snedecor $\mathcal{F}$ variates is presented using the moment matching method. The obtained PDF and CDF are used to evaluate the performance of wireless communication applications including the outage probability, the effective capacity and the channel capacities under four different adaptive transmission strategies. Moreover, the corresponding approximate expressions are obtained to provide useful insights for the design and deployment of wireless communication systems. In addition, we derive simple asymptotic expressions for the proposed mathematical analysis in the high signal-to-noise ratio regime. Finally, the numerical results demonstrate the accuracy of the derived expressions.

cs.IT↗

arXiv2019

Sub-Channel Allocation for Device-to-Device Underlaying Full-Duplex mmWave Small Cells using Coalition Formation Games

The small cells in millimeter wave (mmWave) have been utilized extensively for the fifth generation (5G) mobile networks. And full-duplex (FD) communications become possible with the development of self-interference (SI) cancellation technology. In this paper, we focus on the optimal allocation of the sub-channels in the small cells deployed densely underlying the mmWave networks. In order to improve the resource utilization and network capacity, device-to-device (D2D) communications are adopted in networks. For maximizing the system throughput, we propose a cooperative sub-channel allocation approach based on coalition formation game, and theoretically prove the convergence of the proposed allocation algorithm. The utility of the coalition formation game is closely related to the sum system throughput in this paper, and each link makes an individual decision to leave or join any coalition based on the principle of maximizing the utility. Besides, a threshold of the minimum transmission rate is given to improve the system fairness. Through extensive simulations, we demonstrate that our proposed scheme has a near-optimal performance on sum throughput. In addition, we verify the low complexity of the proposed scheme by simulating the number of switch operations.

cs.NI↗

arXiv2019

Energy-Efficient Power Control of Train-ground mmWave Communication for High Speed Trains

High speed train system has proven to be a very flexible and attractive system that can be developed under various circumstances and in different contexts and cultures. As a result, high speed trains are widely deployed around the world. Providing more reliable and higher data rate communication services for high speed trains has become one of the most urgent challenges. With vast amounts of spectrum available, the millimeter wave (mmWave) system is able to provide transmission rates of several gigabits per second for high speed trains. At the same time, mmWave communication also suffers from high attenuation, thus higher energy efficiency should be considered. This paper proposes an energy efficient power control scheme of train-ground mmWave communication for high speed trains. Considering a beam switching method for efficient beam alignment, we first establish position prediction model, the realistic direction antenna model and receive power model. And then we allocate the transmission power rationally through the power minimization algorithm while ensuring the total amount of transmission data. Based on this, this paper also develops a hybrid optimization scheme and finds the limit of total energy consumption when the number of segments goes to infinity. Through simulation with various system parameters and taking velocity estimation error into account, we demonstrate the superior performance of our schemes.

cs.NI↗