arXiv subjects

Bo Ai

Publications and source records attributed to Bo Ai.

At least 253 records · Page 14Linked to original sources

arXiv2022

Surface engineering for cellulose as a boosted Layer-by-Layer assembly: excellent flame retardancy and improved durability with introduction of bio-based "molecular glue"

Layer-by-Layer (LbL) assembly was attractive as a versatile tool to address the flammability of cotton, while the washing fastness of LbL coating stayed an issue. Aiming to tackle this issue, LbL layers consisted of phenylphosphonic acid (PHA) and 3-aminopropyltriethoxysilane (APTES) was deposited on polydopamine (PDA)-coated cotton. The prepared cotton reached 31.4% of limiting oxygen index (LOI), and extinguished immediately after removing the ignitor. Peak of heat release rate (pHRR) attenuated around 36 % compared with pure cotton. A combined barrier and quenching mechanisms were proposed. Moreover, enhanced washing durability (24.1% of LOI) was achieved even after 50 detergent laundering cycles. A facile, boosted LbL approach with proposed π-π stacking interactions between PDA abundant aromatic structures and benzene ring in PHA from LbL layers, is first to put forward to construct durable efficient flame retardant (FR) cotton. This work attempted to enlighten more thoughts and design for durable FR cotton fabrics.

cond-mat.soft↗

arXiv2021

Multiple Residual Dense Networks for Reconfigurable Intelligent Surfaces Cascaded Channel Estimation

Reconfigurable intelligent surface (RIS) constitutes an essential and promising paradigm that relies programmable wireless environment and provides capability for space-intensive communications, due to the use of low-cost massive reflecting elements over the entire surfaces of man-made structures. However, accurate channel estimation is a fundamental technical prerequisite to achieve the huge performance gains from RIS. By leveraging the low rank structure of RIS channels, three practical residual neural networks, named convolutional blind denoising network, convolutional denoising generative adversarial networks and multiple residual dense network, are proposed to obtain accurate channel state information, which can reflect the impact of different methods on the estimation performance. Simulation results reveal the evolution direction of these three methods and reveal their superior performance compared with existing benchmark schemes.

cs.IT↗

arXiv2021

A Scheme of Channel Prediction Based on Artificial Neural Network

Accurate channel modeling is the foundation of communication system design. However, the traditional measurement-based modeling approach has increasing challenges for the scenarios with insufficient measurement data. To obtain enough data for channel modeling, the Artificial Neural Network (ANN) is used in this paper to predict channel data. The high mobility railway channel is considered, which is a typical scenario where it is challenging to obtain enough data for modeling within a short sampling interval. Three types of ANNs, the Back Propagation Network, Radial Basis Function Neural Network and Extreme Learning Machine, are considered to predict channel path loss and shadow fading. The Root-Mean-Square error is used to evaluate prediction accuracy. The factors that may influence prediction accuracy are compared and discussed, including the type of network, number of neurons and proportion of training data. It is found that a larger number of neurons can significantly reduce prediction error, whereas the influence of proportion of training data is relatively small. The results can be used to improve modeling accuracy of path loss and shadow fading when measurement data is reduced.

cs.IT↗

arXiv2021

Artificial intelligence enabled radio propagation for communications-Part I: Channel characterization and antenna-channel optimization

To provide higher data rates, as well as better coverage, cost efficiency, security, adaptability, and scalability, the 5G and beyond 5G networks are developed with various artificial intelligence techniques. In this two-part paper, we investigate the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. It firstly provides a comprehensive overview of ML for channel characterization and ML-based antenna-channel optimization in this first part, and then it gives a state-of-the-art literature review of channel scenario identification and channel modeling in Part II. Fundamental results and key concepts of ML for communication networks are presented, and widely used ML methods for channel data processing, propagation channel estimation, and characterization are analyzed and compared. A discussion of challenges and future research directions for ML-enabled next generation networks of the topics covered in this part rounds off the paper.

eess.SP↗

arXiv2021

Artificial intelligence enabled radio propagation for communications-Part II: Scenario identification and channel modeling

This two-part paper investigates the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. In Part I, we introduced AI and ML as well as provided a comprehensive survey on ML enabled channel characterization and antenna-channel optimization, and in this part (Part II) we review state-of-the-art literature on scenario identification and channel modeling here. In particular, the key ideas of ML for scenario identification and channel modeling/prediction are presented, and the widely used ML methods for propagation scenario identification and channel modeling and prediction are analyzed and compared. Based on the state-of-art, the future challenges of AI/ML-based channel data processing techniques are given as well.

eess.SP↗

arXiv2021

Improving Sum-Rate of Cell-Free Massive MIMO with Expanded Compute-and-Forward

Cell-free massive multiple-input multiple-output (MIMO) employs a large number of distributed access points (APs) to serve a small number of user equipments (UEs) via the same time/frequency resource. Due to the strong macro diversity gain, cell-free massive MIMO can considerably improve the achievable sum-rate compared to conventional cellular massive MIMO. However, the performance of cell-free massive MIMO is upper limited by inter-user interference (IUI) when employing simple maximum ratio combining (MRC) at receivers. To harness IUI, the expanded compute-and-forward (ECF) framework is adopted. In particular, we propose power control algorithms for the parallel computation and successive computation in the ECF framework, respectively, to exploit the performance gain and then improve the system performance. Furthermore, we propose an AP selection scheme and the application of different decoding orders for the successive computation. Finally, numerical results demonstrate that ECF frameworks outperform the conventional CF and MRC frameworks in terms of achievable sum-rate.

cs.IT↗

arXiv2021

Deep Learning-Based Power Control for Uplink Cell-Free Massive MIMO Systems

In this paper, a general framework for deep learning-based power control methods for max-min, max-product and max-sum-rate optimization in uplink cell-free massive multiple-input multiple-output (CF mMIMO) systems is proposed. Instead of using supervised learning, the proposed method relies on unsupervised learning, in which optimal power allocations are not required to be known, and thus has low training complexity. More specifically, a deep neural network (DNN) is trained to learn the map between fading coefficients and power coefficients within short time and with low computational complexity. It is interesting to note that the spectral efficiency of CF mMIMO systems with the proposed method outperforms previous optimization methods for max-min optimization and fits well for both max-sum-rate and max-product optimizations.

cs.IT↗

arXiv2021

Uplink Performance of Cell-Free Massive MIMO Over Spatially Correlated Rician Fading Channels

We consider a practical cell-free massive multiple-input-multiple-output (MIMO) system with multi-antenna access points (APs) and spatially correlated Rician fading channels. The significant phase-shift of the line-of-sight component induced by the user equipment movement is modeled randomly. Furthermore, we investigate the uplink spectral efficiency (SE) with maximum ratio (MR)/local minimum mean squared error (L-MMSE) combining and optimal large-scale fading decoding based on the phase-aware MMSE, phase-aware element-wise MMSE and linear MMSE (LMMSE) estimators. Then new closed-form SE expressions with MR combining are derived. Numerical results validate our derived expressions and show that the SE benefits from the spatial correlation. It is important to observe that the performance gap between L-MMSE and MR combining increases with the number of antennas per AP and the SE of the LMMSE estimator is lower than that of other estimators due to the lack of phase-shifts knowledge.

cs.IT↗

arXiv2021

A Survey on User-Centric Cell-Free Massive MIMO Systems

The mobile data traffic has been exponentially growing during the last decades, which has been enabled by the densification of the network infrastructure in terms of increased cell density (i.e., ultra-dense network (UDN)) and/or increased number of active antennas per access point (AP) (i.e., massive multiple-input multiple-output (mMIMO)). However, neither UDN nor mMIMO will meet the increasing data rate demands of the sixth generation (6G) wireless communications due to the inter-cell interference and large quality-of-service variations, respectively. Cell-free (CF) mMIMO, which combines the best aspects of UDN and mMIMO, is viewed as a key solution to this issue. In such systems, each user equipment (UE) is served by a preferred set of surrounding APs cooperatively. In this paper, we provide a survey of the state-of-the-art literature on CF mMIMO. As a starting point, the significance and the basic properties of CF mMIMO are highlighted. We then present the canonical framework, where the essential details (i.e., transmission procedure and mathematical system model) are discussed. Next, we provide a deep look at the resource allocation and signal processing problems related to CF mMIMO and survey the up-to-date schemes and algorithms. After that, we discuss the practical issues when implementing CF mMIMO. Potential future directions are then pointed out. Finally, we conclude this paper with a summary of the key lessons learned in this field. This paper aims to provide a starting point for anyone who wants to conduct research on CF mMIMO for future wireless networks.

cs.IT↗

arXiv2021

A Joint Design for STAR-RIS enhanced NOMA-CoMP Networks: A Simultaneous-Signal-Enhancement-and-Cancellation-based (SSECB) Design

In this correspondence, a novel simultaneous transmitting and reflecting (STAR) reconfigurable intelligent surfaces (RISs) design is proposed in a non-orthogonal multiple access (NOMA) enhanced coordinated multi-point transmission (CoMP) network. Based on the insights of signal-enhancement-based (SEB) and signal-cancellation-based (SCB) designs, we propose a novel simultaneous-signal-enhancement-and-cancellation-based (SSECB) design, where the inter-cell interferences and desired signals can be simultaneously eliminated and boosted. Our simulation results demonstrate that: i) the inter-cell interference can be perfectly eliminated, and the desired signals can be enhanced simultaneously with the aid of a large number of RIS elements; ii) the proposed SSECB design is capable of outperforming the conventional SEB and SCB designs.

cs.IT↗

arXiv2021

Coalition Game based User Association for mmWave Mobile Relay Systems in Rail Traffic Scenarios

Rail transportation, especially, high-speed rails (HSR), is an important infrastructure for the development of national economy and the promotion of passenger experience. Due to the large bandwidth, millimeter wave (mmWave) communication is regarded as a promising technology to meet the demand of high data rates. However, since mmWave communication has the characteristic of high attenuation, mobile relay (MR) is considered in this paper. Also, full-duplex (FD) communications have been proposed to improve the spectral efficiency. However, because of the high speed, as well as the problem of penetration loss, passengers on the train have a poor quality of service. Consequently, an effective user association scheme for HSR in mmWave band is necessary. In this paper, we investigate the user association optimization problem in mmWave mobilerelay systems where the MRs operate in the FD mode. To maximize the system capacity, we propose a cooperative user association approach based on coalition formation game, and develop a coalition formation algorithm to solve the challenging NP-hard problem. We also prove the convergence and Nashstable property of the proposed algorithm. Extensive simulations are done to show the system performance of the proposed scheme under various network settings. It is demonstrated that the proposed distributed low complexity scheme achieves a nearoptimal performance and outperforms two baseline schemes in terms of average system throughput.

cs.IT↗

arXiv2021

Robust Symbol-Level Precoding and Passive Beamforming for IRS-Aided Communications

This paper investigates a joint beamforming design in a multiuser multiple-input single-output (MISO) communication network aided with an intelligent reflecting surface (IRS) panel. The symbol-level precoding (SLP) is adopted to enhance the system performance by exploiting the multiuser interference (MUI) with consideration of bounded channel uncertainty. The joint beamforming design is formulated into a nonconvex worst-case robust programming to minimize the transmit power subject to single-to-noise ratio (SNR) requirements. To address the challenges due to the constant modulus and the coupling of the beamformers, we first study the single-user case. Specifically, we propose and compare two algorithms based on the semidefinite relaxation (SDR) and alternating optimization (AO) methods, respectively. It turns out that the AO-based algorithm has much lower computational complexity but with almost the same power to the SDR-based algorithm. Then, we apply the AO technique to the multiuser case and thereby develop an algorithm based on the proximal gradient descent (PGD) method. The algorithm can be generalized to the case of finite-resolution IRS and the scenario with direct links from the transmitter to the users. Numerical results show that the SLP can significantly improve the system performance. Meanwhile, 3-bit phase shifters can achieve near-optimal power performance.

cs.IT↗

arXiv2021

Cluster-based Characterization and Modeling for UAV Air-to-Ground Time-Varying Channels

With the deep integration between the unmanned aerial vehicle (UAV) and wireless communication, UAV-based air-to-ground (AG) propagation channels need more detailed descriptions and accurate models. In this paper, we aim to perform cluster-based characterization and modeling for AG channels. To our best knowledge, this is the first study that concentrates on the clustering and tracking of multipath components (MPCs) for time-varying AG channels. Based on measurement data at 6.5 GHz with 500 MHz of bandwidth, we first estimate potential MPCs utilizing the space-alternating generalized expectation-maximization (SAGE) algorithm. Then, we cluster the extracted MPCs considering their static and dynamic characteristics by employing K-Power-Means (KPM) algorithm under multipath component distance (MCD) measure. For characterizing time-variant clusters, we exploit a clustering-based tracking (CBT) method, which efficiently quantifies the survival lengths of clusters. Ultimately, we establish a cluster-based channel model, and validations illustrate the accuracy of the proposed model. This work not only promotes a better understanding of AG propagation channels but also provides a general cluster-based AG channel model with certain extensibility.

eess.SP↗

arXiv2021

Resource Allocation for Millimeter-Wave Train-Ground Communications in High-Speed Railway Scenarios

With the development of wireless communication, higher requirements arise for train-ground wireless communications in high-speed railway (HSR) scenarios. The millimeter-wave (mm-wave) frequency band with rich spectrum resources can provide users in HSR scenarios with high performance broadband multimedia services, while the full-duplex (FD) technology has become mature. In this paper, we study train-ground communication system performance in HSR scenarios with mobile relays (MRs) mounted on rooftop of train and operating in the FD mode. We formulate a nonlinear programming problem to maximize network capacity by allocation of spectrum resources. Then, we develop a sequential quadratic programming (SQP) algorithm based on the Lagrange function to solve the bandwidth allocation optimization problem for track-side base station (BS) and MRs in this mm-wave train-ground communication system. Extensive simulation results demonstrate that the proposed SQP algorithm can effectively achieve high network capacity for trainground communication in HSR scenarios while being robust to the residual self-interference (SI).

cs.IT↗

arXiv2021

Impact of Channel Aging on Cell-Free Massive MIMO Over Spatially Correlated Channels

In this paper, we investigate the impact of channel aging on the performance of cell-free (CF) massive multiple-input multiple-output (MIMO) systems with both spatial correlation and pilot contamination. We derive novel closed-form uplink and downlink spectral efficiency (SE) expressions that take imperfect channel estimation into account. More specifically, we consider large-scale fading decoding and matched-filter receiver cooperation in the uplink. The uplink performance of a small-cell (SC) system is derived for comparison. The CF massive MIMO system achieves higher 95\%-likely uplink SE than the SC system. In the downlink, the coherent transmission has four times higher 95\%-likely per-user SE than the non-coherent transmission. Statistical channel cooperation power control (SCCPC) is used to mitigate the inter-user interference. SCCPC performs better than full power transmission, but the benefits are gradually weakened as the channel aging becomes stronger. Furthermore, strong spatial correlation reduces the SE but degrades the effect of channel aging. Increasing the number of antennas can improve the SE while decreasing the energy efficiency. Finally, we use the maximum normalized Doppler shift to design the SE-improved length of the resource block. Simulation results are presented to validate the accuracy of our expressions and prove that the CF massive MIMO system is more robust to channel aging than the SC system.

cs.IT↗

arXiv2021

UAV Communications with WPT-aided Cell-Free Massive MIMO Systems

Cell-free (CF) massive multiple-input multiple-output (MIMO) is a promising solution to provide uniform good performance for unmanned aerial vehicle (UAV) communications. In this paper, we propose the UAV communication with wireless power transfer (WPT) aided CF massive MIMO systems, where the harvested energy (HE) from the downlink WPT is used to support both uplink data and pilot transmission. We derive novel closed-form downlink HE and uplink spectral efficiency (SE) expressions that take hardware impairments of UAV into account. UAV communications with current small cell (SC) and cellular massive MIMO enabled WPT systems are also considered for comparison. It is significant to show that CF massive MIMO achieves two and five times higher 95\%-likely uplink SE than the ones of SC and cellular massive MIMO, respectively. Besides, the large-scale fading decoding receiver cooperation can reduce the interference of the terrestrial user. Moreover, the maximum SE can be achieved by changing the time-splitting fraction. We prove that the optimal time-splitting fraction for maximum SE is determined by the number of antennas, altitude and hardware quality factor of UAVs. Furthermore, we propose three UAV trajectory design schemes to improve the SE. It is interesting that the angle search scheme performs best than both AP search and line path schemes. Finally, simulation results are presented to validate the accuracy of our expressions.

cs.IT↗

arXiv2021

Channel Modeling for UAV Communications: State of the Art, Case Studies, and Future Directions

As essential aerial platforms, unmanned aerial vehicles (UAVs) play an increasingly important role in broad wireless connectivity and high-data-rate transmission for future communication systems. Notably, various communication scenarios are involved in UAV communications, such as intercommunications between UAVs and communications with the ground user equipment, the cellular base station, and the ground station, to name a few. However, existing works mostly focus on a single communication scenario, a designated channel type, and a specific operating frequency, thus urgently requiring a comprehensive understanding of multi-scenario, multi-frequency, and multi-type UAV channels. This article pours attention into the essentials of corresponding air-to-air (A2A) and air-to-ground (A2G) channels in UAV communications. We first identify the latest key challenges of channel modeling for UAV communications. We then provide the state of the art for A2A and A2G channel properties and models based on extensive measurement campaigns. In particular, we conduct realistic case studies to further demonstrate critical channel characterizations and machine learning-based modeling methods. Last but not least, potential directions are widely discussed for paving the way towards more accurate and effective channel models for UAV communications.

eess.SP↗

arXiv2021

Physical Layer Security Enhancement With Reconfigurable Intelligent Surface-Aided Networks

Reconfigurable intelligent surface (RIS)-aided wireless communications have drawn significant attention recently. We study the physical layer security of the downlink RIS-aided transmission framework for randomly located users in the presence of a multi-antenna eavesdropper. To show the advantages of RIS-aided networks, we consider two practical scenarios: Communication with and without RIS. In both cases, we apply the stochastic geometry theory to derive exact probability density function (PDF) and cumulative distribution function (CDF) of the received signal-to-interference-plus-noise ratio. Furthermore, the obtained PDF and CDF are exploited to evaluate important security performance of wireless communication including the secrecy outage probability, the probability of nonzero secrecy capacity, and the average secrecy rate. Monte-Carlo simulations are subsequently conducted to validate the accuracy of our analytical results. Compared with traditional MIMO systems, the RIS-aided system offers better performance in terms of physical layer security. In particular, the security performance is improved significantly by increasing the number of reflecting elements equipped in a RIS. However, adopting RIS equipped with a small number of reflecting elements cannot improve the system performance when the path loss of NLoS is small.

cs.IT↗