arXiv subjects

Brian L. Evans

Publications and source records attributed to Brian L. Evans.

At least 37 records · Page 2Linked to original sources

arXiv2020

Advanced Receiver Architectures for Millimeter Wave Communications with Low-Resolution ADCs

Employing low-resolution analog-to-digital converters (ADCs) for millimeter wave receivers with large antenna arrays provides opportunity to efficiently reduce power consumption of the receiver. Reducing ADC resolution, however, results in performance degradation due to non-negligible quantization error. In addition, the large number of radio frequency (RF) chains is still not desirable. Accordingly, conventional low-resolution ADC systems require more efficient designs to minimize the cost and complexity while maximizing performance. In this article, we discuss advanced low-resolution ADC receiver architectures that further improve the spectral and energy efficiency tradeoff. To reduce both the numbers of RF chains and ADC bits, hybrid analog-and-digital beamforming is jointly considered with low-resolution ADCs. We explore the challenges in designing such receivers and present key insights on how the advanced architectures overcome such challenges. As an alternative low-resolution ADC receiver, we also introduce receivers with learning-based detection. The receiver does not require explicit channel estimation, thereby is suitable for one-bit ADC systems. Finally, future challenges and research issues are discussed.

cs.IT↗

arXiv2020

Compressed-Sensing based Beam Detection in 5G NR Initial Access

To support millimeter wave (mmWave) frequency bands in cellular communications, both the base station and the mobile platform utilize large antenna arrays to steer narrow beams towards each other to compensate the path loss and improve communication performance. The time-frequency resource allocated for initial access, however, is limited, which gives rise to need for efficient approaches for beam detection. For hybrid analog-digital beamforming (HB) architectures, which are used to reduce power consumption, we propose a compressed sensing (CS) based approach for 5G initial access beam detection that is for a HB architecture and that is compliant with the 3GPP standard. The CS-based approach is compared with the exhaustive search in terms of beam detection accuracy and by simulation is shown to outperform. Up to 256 antennas are considered, and the importance of a careful codebook design is reaffirmed.

eess.SP↗

arXiv2020

GNSS Signal Authentication via Power and Distortion Monitoring

We propose a simple low-cost technique that enables civil Global Positioning System (GPS) receivers and other civil global navigation satellite system (GNSS) receivers to reliably detect carry-off spoofing and jamming. The technique, which we call the Power-Distortion detector, classifies received signals as interference-free, multipath-afflicted, spoofed, or jammed according to observations of received power and correlation function distortion. It does not depend on external hardware or a network connection and can be readily implemented on many receivers via a firmware update. Crucially, the detector can with high probability distinguish low-power spoofing from ordinary multipath. In testing against over 25 high-quality empirical data sets yielding over 900,000 separate detection tests, the detector correctly alarms on all malicious spoofing or jamming attacks while maintaining a <0.6% single-channel false alarm rate.

cs.CR↗

arXiv2019

A Framework for Automated Cellular Network Tuning with Reinforcement Learning

Tuning cellular network performance against always occurring wireless impairments can dramatically improve reliability to end users. In this paper, we formulate cellular network performance tuning as a reinforcement learning (RL) problem and provide a solution to improve the performance for indoor and outdoor environments. By leveraging the ability of Q-learning to estimate future performance improvement rewards, we propose two algorithms: (1) closed loop power control (PC) for downlink voice over LTE (VoLTE) and (2) self-organizing network (SON) fault management. The VoLTE PC algorithm uses RL to adjust the indoor base station transmit power so that the signal to interference plus noise ratio (SINR) of a user equipment (UE) meets the target SINR. It does so without the UE having to send power control requests. The SON fault management algorithm uses RL to improve the performance of an outdoor base station cluster by resolving faults in the network through configuration management. Both algorithms exploit measurements from the connected users, wireless impairments, and relevant configuration parameters to solve a non-convex performance optimization problem using RL. Simulation results show that our proposed RL based algorithms outperform the industry standards today in realistic cellular communication environments.

cs.NI↗

arXiv2019

Deep Reinforcement Learning for 5G Networks: Joint Beamforming, Power Control, and Interference Coordination

The fifth generation of wireless communications (5G) promises massive increases in traffic volume and data rates, as well as improved reliability in voice calls. Jointly optimizing beamforming, power control, and interference coordination in a 5G wireless network to enhance the communication performance to end users poses a significant challenge. In this paper, we formulate the joint design of beamforming, power control, and interference coordination as a non-convex optimization problem to maximize the signal to interference plus noise ratio (SINR) and solve this problem using deep reinforcement learning. By using the greedy nature of deep Q-learning to estimate future rewards of actions and using the reported coordinates of the users served by the network, we propose an algorithm for voice bearers and data bearers in sub-6 GHz and millimeter wave (mmWave) frequency bands, respectively. The algorithm improves the performance measured by SINR and sum-rate capacity. In realistic cellular environments, the simulation results show that our algorithm outperforms the link adaptation industry standards for sub-6 GHz voice bearers. For data bearers in the mmWave frequency band, our algorithm approaches the maximum sum-rate capacity, but with less than 4% of the required run time.

cs.NI↗

arXiv2019

Versatile Compressive mmWave Hybrid Beamformer Codebook Design Framework

Hybrid beamforming (HB) architectures are attractive for wireless communication systems with large antenna arrays because the analog beamforming stage can significantly reduce the number of RF transceivers and hence power consumption. In HB systems, channel estimation (CE) becomes challenging due to indirect access by the baseband processing to the communication channels and due to low SNR before beam alignment. Compressed sensing (CS) based algorithms have been adopted to address these challenges by leveraging the sparse nature of millimeter wave multi-input multi-output (mmWave MIMO) channels. In many CS algorithms for narrowband CE, the hybrid beamformers are randomly configured which does not always yield the low-coherence sensing matrices desirable for those CS algorithms whose recovery guarantees rely on coherence. In this paper, we propose a versatile deterministic HB codebook design framework for CS algorithms with coherence-based recovery guarantees to enhance CE accuracy. Simulation results show that the proposed design can obtain lower channel estimation error and higher spectral efficiency compared with random codebook for phase-shifter-, switch-, and lens-based HB architectures.

cs.IT↗

arXiv2019

Hybrid Beamformer Codebook Design and Ordering for Compressive mmWave Channel Estimation

In millimeter wave (mmWave) communication systems, beamforming with large antenna arrays is critical to overcome high path losses. Separating all-digital beamforming into analog and digital stages can provide the large reduction in power consumption and small loss in spectral efficiency needed for practical implementations. Developing algorithms with this favorable tradeoff is challenging due to the additional degrees of freedom in the analog stage and its accompanying hardware constraints. In hybrid beamforming systems, for example, channel estimation algorithms do not directly observe the channels, face a high channel count, and operate at low SNR before transmit-receive beam alignment. Since mmWave channels are sparse in time and beam domains, many compressed sensing (CS) channel estimation algorithms have been developed that randomly configure the analog beamformers, digital beamformers, and/or pilot symbols. In this paper, we propose to design deterministic beamformers and pilot symbols for open-loop channel estimation. We use CS approaches that rely on low coherence for their recovery guarantees, and hence seek to minimize the mutual coherence of the compressed sensing matrix. We also propose a precoder column ordering to design the pilot symbols. Simulation results show that our beamformer designs reduce channel estimation error over competing methods.

cs.IT↗

arXiv2019

Robust Learning-Based ML Detection for Massive MIMO Systems with One-Bit Quantized Signals

In this paper, we investigate learning-based maximum likelihood (ML) detection for uplink massive multiple-input and multiple-output (MIMO) systems with one-bit analog-to-digital converters (ADCs). To overcome the significant dependency of learning-based detection on the training length, we propose two one-bit ML detection methods: a biased-learning method and a dithering-and-learning method. The biased-learning method keeps likelihood functions with zero probability from wiping out the obtained information through learning, thereby providing more robust detection performance. Extending the biased method to a system with knowledge of the received signal-to-noise ratio, the dithering-and-learning method estimates more likelihood functions by adding dithering noise to the quantizer input. The proposed methods are further improved by adopting the post likelihood function update, which exploits correctly decoded data symbols as training pilot symbols. The proposed methods avoid the need for channel estimation. Simulation results validate the detection performance of the proposed methods in symbol error rate.

cs.IT↗

arXiv2019

Base Station Antenna Selection for Low-Resolution ADC Systems

This paper investigates antenna selection at a base station with large antenna arrays and low-resolution analog-to-digital converters. For downlink transmit antenna selection for narrowband channels, we show (1) a selection criterion that maximizes sum rate with zero-forcing precoding equivalent to that of a perfect quantization system; (2) maximum sum rate increases with number of selected antennas; (3) derivation of the sum rate loss function from using a subset of antennas; and (4) unlike high-resolution converter systems, sum rate loss reaches a maximum at a point of total transmit power and decreases beyond that point to converge to zero. For wideband orthogonal-frequency-division-multiplexing (OFDM) systems, our results hold when entire subcarriers share a common subset of antennas. For uplink receive antenna selection for narrowband channels, we (1) generalize a greedy antenna selection criterion to capture tradeoffs between channel gain and quantization error; (2) propose a quantization-aware fast antenna selection algorithm using the criterion; and (3) derive a lower bound on sum rate achieved by the proposed algorithm based on submodular functions. For wideband OFDM systems, we extend our algorithm and derive a lower bound on its sum rate. Simulation results validate theoretical analyses and show increases in sum rate over conventional algorithms.

eess.SP↗

arXiv2019

Antenna Selection for Large-Scale MIMO Systems with Low-Resolution ADCs

One way to reduce the power consumption in large-scale multiple-input multiple-output (MIMO) systems is to employ low-resolution analog-to-digital converters (ADCs). In this paper, we investigate antenna selection for large-scale MIMO receivers with low-resolution ADCs, thereby providing more flexibility in resolution and number of ADCs. To incorporate quantization effects, we generalize an existing objective function for a greedy capacity-maximization antenna selection approach. The derived objective function offers an opportunity to select an antenna with the best tradeoff between the additional channel gain and increase in quantization error. Using the generalized objective function, we propose an antenna selection algorithm based on a conventional antenna selection algorithm without an increase in overall complexity. Simulation results show that the proposed algorithm outperforms the conventional algorithm in achievable capacity for the same number of antennas.

cs.IT↗

arXiv2019

Deep Learning in Downlink Coordinated Multipoint in New Radio Heterogeneous Networks

We propose a method to improve the performance of the downlink coordinated multipoint (DL CoMP) in heterogeneous fifth generation New Radio (NR) networks. The standards-compliant method is based on the construction of a surrogate CoMP trigger function using deep learning. The cooperating set is a single-tier of sub-6 GHz heterogeneous base stations operating in the frequency division duplex mode (i.e., no channel reciprocity). This surrogate function enhances the downlink user throughput distribution through online learning of non-linear interactions of features and lower bias learning models. In simulation, the proposed method outperforms industry standards in a realistic and scalable heterogeneous cellular environment.

cs.NI↗

arXiv2019

User Scheduling for Millimeter Wave Hybrid Beamforming Systems with Low-Resolution ADCs

We investigate uplink user scheduling for millimeter wave (mmWave) hybrid analog/digital beamforming systems with low-resolution analog-to-digital converters (ADCs). Deriving new scheduling criteria for the mmWave systems, we show that the channel structure in the beamspace, in addition to the channel magnitude and orthogonality, plays a key role in maximizing the achievable rates of scheduled users due to quantization error. The criteria show that to maximize the achievable rate for a given channel gain, the channels of the scheduled users need to have (1) as many propagation paths as possible with unique angle-of-arrivals (AoAs) and (2) even power distribution in the beamspace. Leveraging the derived criteria, we propose an efficient scheduling algorithm for mmWave zero-forcing receivers with low-resolution ADCs. We further propose a chordal distance-based scheduling algorithm that exploits only the AoA knowledge and analyze the performance by deriving ergodic rates in closed form. Based on the derived rates, we show that the beamspace channel leakage resulting from phase offsets between AoAs and quantized angles of analog combiners can lead to sum rate gain by reducing quantization error compared to the channel without leakage. Simulation results validate the sum rate performance of the proposed algorithms and derived ergodic rates expressions.

cs.IT↗

arXiv2019

Machine Learning in Downlink Coordinated Multipoint in Heterogeneous Networks

We propose a method for downlink coordinated multipoint (DL CoMP) in heterogeneous fifth generation New Radio (NR) networks. The primary contribution of our paper is an algorithm to enhance the trigger of DL CoMP using online machine learning. We use support vector machine (SVM) classifiers to enhance the user downlink throughput in a realistic frequency division duplex network environment. Our simulation results show improvement in both the macro and pico base station downlink throughputs due to the informed triggering of the multiple radio streams as learned by the SVM classifier.

stat.ML↗

arXiv2019

Analysis of Ergodic Rate for Transmit Antenna Selection in Low-Resolution ADC Systems

In this paper, we analyze the ergodic rate of single transmit antenna selection (TAS) in low-resolution analog-to-digital converter (ADC) systems. Using low-resolution ADCs is a potential power-reduction solution for multiple antenna systems. Low-resolution ADC systems with TAS can further reduce cost and power consumption in wireless transceivers. Considering such systems, we derive the approximated lower bound of ergodic rate with TAS. Here, we exploit the approximated distribution of the sum of Weibull random variables to address the challenge involved in analyzing the quantization error. We, then, derive the approximated ergodic rate with TAS for a single receive antenna in closed form, which reveals the TAS gain in low-resolution ADC systems. The upper bound of a single transmit and single receive antenna system under coarse quantization is derived to compare with the ergodic rate of the TAS system. The analysis shows that the TAS method achieves a large improvement in ergodic rate with a moderate number of transmit antennas. Simulation results validate the derived ergodic rates and resulting intuition.

cs.IT↗

arXiv2019

Deep Q-Learning for Self-Organizing Networks Fault Management and Radio Performance Improvement

We propose an algorithm to automate fault management in an outdoor cellular network using deep reinforcement learning (RL) against wireless impairments. This algorithm enables the cellular network cluster to self-heal by allowing RL to learn how to improve the downlink signal to interference plus noise ratio through exploration and exploitation of various alarm corrective actions. The main contributions of this paper are to 1) introduce a deep RL-based fault handling algorithm which self-organizing networks can implement in a polynomial runtime and 2) show that this fault management method can improve the radio link performance in a realistic network setup. Simulation results show that our proposed algorithm learns an action sequence to clear alarms and improve the performance in the cellular cluster better than existing algorithms, even against the randomness of the network fault occurrences and user movements.

cs.NI↗

arXiv2018

A Hybrid Beamforming Receiver with Two-Stage Analog Combining and Low-Resolution ADCs

In this paper, we propose a two-stage analog combining architecture for millimeter wave (mmWave) communications with hybrid analog/digital beamforming and low-resolution analog-to-digital converters (ADCs). We first derive a two-stage combining solution by solving a mutual information (MI) maximization problem without a constant modulus constraint on analog combiners. With the derived solution, the proposed receiver architecture splits the analog combining into a channel gain aggregation stage followed by a spreading stage to maximize the MI by effectively managing quantization error. We show that the derived two-stage combiner achieves the optimal scaling law with respect to the number of radio frequency (RF) chains and maximizes the MI for homogeneous singular values of a MIMO channel. Then, we develop a two-stage analog combining algorithm to implement the derived solution under a constant modulus constraint for mmWave channels. Simulation results validate the algorithm performance in terms of MI.

cs.IT↗

arXiv2018

Q-Learning Algorithm for VoLTE Closed-Loop Power Control in Indoor Small Cells

We propose a reinforcement learning (RL) based closed loop power control algorithm for the downlink of the voice over LTE (VoLTE) radio bearer for an indoor environment served by small cells. The main contributions of our paper are to 1) use RL to solve performance tuning problems in an indoor cellular network for voice bearers and 2) show that our derived lower bound loss in effective signal to interference plus noise ratio due to neighboring cell failure is sufficient for VoLTE power control purposes in practical cellular networks. In our simulation, the proposed RL-based power control algorithm significantly improves both voice retainability and mean opinion score compared to current industry standards. The improvement is due to maintaining an effective downlink signal to interference plus noise ratio against adverse network operational issues and faults.

cs.NI↗

arXiv2018

Hybrid Powerline/Wireless Diversity for Smart Grid Communications: Design Challenges and Real-time Implementation

The demand for energy is growing at an unprecedented pace that is much higher than the energy generation capacity growth rate using both conventional and green technologies.In particular, the electric power sector is consistently rated among the most dynamic growth markets over all other energy markets. Distributed (decentralized) energy generation based on renewable energy sources is an efficient and reliable solution to serve such huge energy demand growth [1]. However, to manage dynamic and complex distributed systems, a massive amount of data has to be measured, collected, exchanged and processed in real time. Smart grids manage an intelligent energy delivery network enabled two-way communications between data concentrators operated by utility companies and smart meters installed at the end users. In particular, dynamic power-grid loading and peak load management are the two main driving forces for bidirectional communications over the grid. Narrowband power line communications (NB-PLC) and wireless communications in the unlicensed frequency band (sub-1 GHz or 2.4 GHz) are the two main communications systems adopted to support the growing smart grid applications. Moreover, since NB-PLC and unlicensed wireless links experience channel and interference with markedly different statistics, transmitting the same information signal concurrently over both links significantly enhances the smart grid communications reliability. In this article, we compare various diversity combining schemes for simultaneous power line and wireless transmissions. Furthermore, we developed a real-time testbed for the hybrid PLC/wireless system to demonstrate the performance enhancement achieved by PLC/wireless diversity combining over a single link performance.

eess.SP↗