SearcharxivSearch

arXiv subjects

C. Couteau

Publications and source records attributed to C. Couteau.

At least 19 recordsLinked to original sources

Hybrid device for quantum nanophotonics

Photons have been identified early on as a very good candidate for quantum technologies applications, as carriers of quantum information, either by polarization encoding, time encoding or spatial encoding. Quantum cryptography, quantum communications, quantum networks and quantum computing are some of the applications targeted by the so called quantum photonics. Nevertheless, it was also clear at an early stage that bulk optics for handling quantum states of light would not be the best option for these technologies. More recently, single photons, entangled photons and quantum light in general have been coupled to integrated approaches coming from classical optics in order to meet the requirements of scalability, reliability and efficiency for quantum technologies. In this article, we describe our recent advances using elongated optical nano-fibers. We also present our latest results on nanocrystals made of perovskites and discuss some of their quantum properties. Finally, we will discuss the general steps necessary in order to couple these nanoemitters efficiently with our photonic platform, based on tapered optical nanofibers.

quant-ph

Nanoscale Quantum Optics

Nanoscale quantum optics explores quantum phenomena in nanophotonics systems for advancing fundamental knowledge in nano and quantum optics and for harnessing the laws of quantum physics in the development of new photonics-based technologies. Here, we review recent progress in the field with emphasis on four main research areas: Generation, detection, manipulation and storage of quantum states of light at the nanoscale, Nonlinearities and ultrafast processes in nanostructured media, Nanoscale quantum coherence, Cooperative effects, correlations and many-body physics tailored by strongly confined optical fields. The focus is both on basic developments and technological implications, especially for what concerns information and communication technology, sensing and metrology, and energy efficiency.

quant-ph

Nanowire lasers

We review principles and trends in the use of semiconductor nanowires (NWs) as gain media for stimulated emission and lasing. Semiconductor nanowires have recently been widely studied for use in integrated optoelectronic devices, such as LEDs, solar cells, and transistors. Intensive research has also been conducted on the use of nanowires for sub-wavelength laser systems that take advantage of their quasi-one-dimensional nature, flexibility in material choice and combination, and intrinsic optoelectronic properties. First, we provide an overview on using quasi-one-dimensional nanowire systems to realize sub-wavelength lasers with efficient, directional, and low-threshold emission. We then describe the state-of-the-art for nanowire lasers in terms of materials, geometry, and wavelength tunability. Next, we present the basics of lasing in semiconductor nanowires, define the key parameters for stimulated emission, and introduce the properties of nanowires. We then review advanced nanowire laser designs from the literature. Finally, we present interesting perspectives for low-threshold nanoscale light sources and optical interconnects. We intend to illustrate the potential of nanolasers in many applications, such as nanophotonic devices that integrate electronics and photonics for next-generation optoelectronic devices. For instance, these building blocks for nanoscale photonics can be used for data storage and biomedical applications when coupled to on-chip characterization tools. These nanoscale monochromatic laser light sources promise breakthroughs in nanophotonics, as they can operate at room temperature, potentially be electrically driven, and yield a better understanding of intrinsic nanomaterial properties and surface state effects in low-dimensional semiconductor systems.

cond-mat.mes-hall

Hybrid integrated optical waveguides in glass for enhanced visible photoluminescence of nanoemitters

Integrated optical devices able to control light matter interactions on the nanoscale have attracted the attention of the scientific community in recent years. However, most of these devices are based on silicon waveguides, limiting their use for telecommunication wavelengths. In this contribution, we propose an integrated device that operates with light in the visible spectrum. The proposed device is a hybrid structure consisting of a high-refractive-index layer placed on top of an ion-exchanged glass waveguide. We demonstrate that this hybrid structure serves as an efficient light coupler for the excitation of nanoemitters. The numerical and experimental results show that the device can enhance the electromagnetic field confinement up to 11 times, allowing a higher photoluminescence signal from nanocrystals placed on its surface. The designed device opens new perspectives in the generation of new optical devices suitable for quantum information or for optical sensing.

physics.app-ph

Mode-selective quantization and multimodal effective models for spherically layered systems

We propose a geometry-specific, mode-selective quantization scheme in coupled field-emitter systems which makes it easy to include material and geometrical properties, intrinsic losses as well as the positions of an arbitrary number of quantum emitters. The method is presented through the example of a spherically symmetric, non-magnetic, arbitrarily layered system. We follow it up by a framework to project the system on simpler, effective cavity QED models. Maintaining a well-defined connection to the original quantization, we derive the emerging effective quantities from the full, mode-selective model in a mathematically consistent way. We discuss the uses and limitations of these effective models.

physics.optics

GaAs/AlGaAs Nanowire Photodetector

We demonstrate an efficient core-shell GaAs/AlGaAs nanowire photodetector operating at room temperature. The design of this nanoscale detector is based on a type-I heterostructure combined with a metal-semiconductor-metal (MSM) radial architecture, in which built-in electric fields at the semiconductor heterointerface and at the metal/semiconductor Schottky contact promote photogenerated charge separation, enhancing photosensitivity. The spectral photoconductive response shows that the nanowire supports resonant optical modes in the near-infrared region, which lead to large photocurrent density in agreement with the predictions of electromagnetic and transport computational models. The single nanowire photodetector shows remarkable peak photoresponsivity of 0.57 A/W, comparable to large-area planar GaAs photodetectors on the market, and a high detectivity of 7.2 10^10 cm\sqrt{Hz}/W at λ=855 nm. This is promising for the design of a new generation of highly sensitive single nanowire photodetectors by controlling optical mode confinement, bandgap, density of states, and electrode engineering.

cond-mat.mes-hall

A concentric plasmonic platform for the efficient excitation of surface plasmon-polaritons

We propose a plasmonic device consisting of a concentric ring grating acting as an efficient tool for directional launching and detection of surface plasmon-polaritons (SPPs). Numerical simulations and optical characterizations are used to study the fabricated structured gold surface. We demonstrate that this circularly symmetrical plasmonic device provides an efficient interface between free space radiation and SPPs. This structure offers an excellent platform for the study of hybrid plasmonics in general and of plasmon-emitter couplings in particular, such as those occurring when exciting dye molecules placed inside the ring. As illustrated in this work, an interesting property of the device is that the position of excitation determines the direction of propagation of the SPPs, providing a flexible mean of studying their interactions with molecules or dipole-like emitters placed on the surface.

cond-mat.mes-hall

Localised excitation of a single photon source by a nanowaveguide

Nowadays, integrated photonics is a key technology in quantum information processing (QIP) but achieving all-optical buses for quantum networks with efficient integration of single photon emitters remains a challenge. Photonic crystals and cavities are good candidates but do not tackle how to effectively address a nanoscale emitter. Using a nanowire nanowaveguide, we realise an hybrid nanodevice which locally excites a single photon source (SPS). The nanowire acts as a passive or active sub-wavelength waveguide to excite the quantum emitter. Our results show that localised excitation of a SPS is possible and is compared with free-space excitation. Our proof of principle experiment presents an absolute addressing efficiency ηa = 10-4 only 50% lower than the one using free-space optics. This important step demonstrates that sufficient guided light in a nanowaveguide made of a semiconductor nanowire is achievable to excite a single photon source. We accomplish a hybrid system offering great potentials for electrically driven SPSs and efficient single photon collection and detection, opening the way for optimum absorption/emission of nanoscale emitters. We also discuss how to improve the addressing efficiency of a dipolar nanoscale emitter with our system.

quant-ph

Stimulated emission from ZnO thin films with high optical gain and low loss

Stimulated surface- and edge-emission were investigated for ZnO thin films grown epitaxially by pulsed laser deposition. The lasing threshold was 0.32 MW/cm2 for surface pumping and 0.5 MW/cm2 for edge pumping, which is significantly lower than thresholds observed previously. A modified variable stripe length method was used to measure the gain, which was 1369 cm-1 for N-band emission. Losses were measured using the shifting excitation spot method and values of 6.2 cm-1 and 6.3 cm-1 were found for the N-band and P-band, respectively. The measured gain and loss were the highest and lowest (respectively) ever reported for ZnO films.

cond-mat.mtrl-sci

Enhancement of ultra-thin film emission using a waveguiding active layer

We present a theoretical study on the impact of an active optical layer on the emission properties of an ultrathin luminescent film. While the study can be generalized to any material, we focus here on a simple layered medium composed of a conjugated polymers (CPs) thin film, a zinc oxide layer (ZnO) and a sapphire substrate. The study spreads throughout variable aspects including the effect of the structure parameters on the CP luminescence and radiation pattern and more specifically the influence of the absorption and emission properties of the active layer. Comparing between the passive and active layer cases, the obtained results show that an enhancement of the CP luminescence of more than 20 times can be obtained by using an optically active underlying layer. The results can be explained in terms of photon recycling where the optically active layer acts as a photon reservoir and a secondary light source for the ultra thin film. This general concept is of a special interest for ultra-trace chemosensor.

cond-mat.mtrl-sci

Waveguiding-assisted random lasing in epitaxial ZnO thin film

Zinc Oxide thin films were grown on c-sapphire substrates using pulsed laser deposition. Pump power dependence of surface emission spectra, acquired using a quadrupled 266 nm laser, revealed room temperature stimulated emission (threshold of 900 kW/cm2). Time dependent spectral analysis plus gain measurements of single-shot, side-emission, spectra pumped with a nitrogen laser revealed random lasing indicative of the presence of self-forming laser cavities. It is suggested that random lasing in an epitaxial system rather than a 3-dimensional configuration of disordered scattering elements, was due to waveguiding in the film. Waveguiding causes light to be amplified within randomly-formed closed-loops acting as lasing cavities.

cond-mat.mes-hall

Characterizing heralded single-photon sources with imperfect measurement devices

Any characterization of a single-photon source is not complete without specifying its second-order degree of coherence, i.e., its $g^{(2)}$ function. An accurate measurement of such coherence functions commonly requires high-precision single-photon detectors, in whose absence, only time-averaged measurements are possible. It is not clear, however, how the resulting time-averaged quantities can be used to properly characterize the source. In this paper, we investigate this issue for a heralded source of single photons that relies on continuous-wave parametric down-conversion. By accounting for major shortcomings of the source and the detectors--i.e., the multiple-photon emissions of the source, the time resolution of photodetectors, and our chosen width of coincidence window--our theory enables us to infer the true source properties from imperfect measurements. Our theoretical results are corroborated by an experimental demonstration using a PPKTP crystal pumped by a blue laser, that results in a single-photon generation rate about 1.2 millions per second per milliwatt of pump power. This work takes an important step toward the standardization of such heralded single-photon sources.

quant-ph

Coherence measures for heralded single-photon sources

Single-photon sources (SPSs) are mainly characterized by the minimum value of their second-order coherence function, viz. their $g^{(2)}$ function. A precise measurement of $g^{(2)}$ may, however, require high time-resolution devices, in whose absence, only time-averaged measurements are accessible. These time-averaged measures, standing alone, do not carry sufficient information for proper characterization of SPSs. Here, we develop a theory, corroborated by an experiment, that allows us to scrutinize the coherence properties of heralded SPSs that rely on continuous-wave parametric down-conversion. Our proposed measures and analysis enable proper standardization of such SPSs.

quant-ph

Growth and characterization of GaAs nanowires on carbon nanotubes composite films: toward flexible nanodevices

Poly(ethylene imine) functionalized carbon nanotube thin films, prepared using the vacuum filtration method, were decorated with Au nanoparticles by in situ reduction of HAuCl4 under mild conditions. These Au nanoparticles were subsequently employed for the growth of GaAs nanowires (NWs) by the vapor-liquid-solid process in a gas source molecular beam epitaxy system. The process resulted in the dense growth of GaAs NWs across the entire surface of the single-walled nanotube (SWNT) films. The NWs, which were orientated in a variety of angles with respect to the SWNT films, ranged in diameter between 20 to 200 nm, with heights up to 2.5 um. Transmission electron microscopy analysis of the NW-SWNT interface indicated that NW growth was initiated upon the surface of the nanotube composite films. Photoluminescence characterization of a single NW specimen showed high optical quality. Rectifying asymmetric current-voltage behavior was observed from contacted NW ensembles and attributed to the core-shell pn-junction within the NWs. Potential applications of such novel hybrid architectures include flexible solar cells, displays, and sensors.

cond-mat.mtrl-sci

Entangled Quantum Key Distribution Over Two Free-Space Optical Links

We report on the first real-time implementation of a quantum key distribution (QKD) system using entangled photon pairs that are sent over two free-space optical telescope links. The entangled photon pairs are produced with a type-II spontaneous parametric down-conversion source placed in a central, potentially untrusted, location. The two free-space links cover a distance of 435 m and 1,325 m respectively, producing a total separation of 1,575 m. The system relies on passive polarization analysis units, GPS timing receivers for synchronization, and custom written software to perform the complete QKD protocol including error correction and privacy amplification. Over 6.5 hours during the night, we observed an average raw key generation rate of 565 bits/s, an average quantum bit error rate (QBER) of 4.92%, and an average secure key generation rate of 85 bits/s.

quant-ph

Multiple Quantum Well AlGaAs Nanowires

This letter reports on the growth, structure and luminescent properties of individual multiple quantum well (MQW) AlGaAs nanowires (NWs). The composition modulations (MQWs) are obtained by alternating the elemental flux of Al and Ga during the molecular beam epitaxy growth of the AlGaAs wire on GaAs (111)B substrates. Transmission electron microscopy and energy dispersive X-ray spectroscopy performed on individual NWs are consistent with a configuration composed of conical segments stacked along the NW axis. Micro-photoluminescence measurements and confocal microscopy showed enhanced light emission from the MQW NWs as compared to non-segmented NWs due to carrier confinement and sidewall passivation.

cond-mat.mtrl-sci

Self-directed growth of AlGaAs core-shell nanowires for visible light applications

Al(0.37)Ga(0.63)As nanowires (NWs) were grown in a molecular beam epitaxy system on GaAs(111)B substrates. Micro-photoluminescence measurements and energy dispersive X-ray spectroscopy indicated a core-shell structure and Al composition gradient along the NW axis, producing a potential minimum for carrier confinement. The core-shell structure formed during the growth as a consequence of the different Al and Ga adatom diffusion lengths.

cond-mat.mtrl-sci

Fast exciton spin relaxation in single quantum dots

Exciton spin relaxation is investigated in single epitaxially grown semiconductor quantum dots in order to test the expected spin relaxation quenching in this system. We study the polarization anisotropy of the photoluminescence signal emitted by isolated quantum dots under steady-state or pulsed non-resonant excitation. We find that the longitudinal exciton spin relaxation time is strikingly short ($\leq$100 ps) even at low temperature. This result breaks down the picture of a frozen exciton spin in quantum dots.

cond-mat.other