SearcharxivSearch

arXiv subjects

C. J. Mellor

Publications and source records attributed to C. J. Mellor.

13 recordsLinked to original sources

Cathodoluminescence spectroscopy of monolayer hexagonal boron nitride

Cathodoluminescence (CL) spectroscopy is a powerful technique for studying emission properties of optoelectronic materials because CL is free from excitable bandgap limits and from ambiguous signals due to simple light scattering and resonant Raman scattering potentially involved in the photoluminescence (PL) spectra. However, direct CL measurements of atomically thin two-dimensional materials, such as transition metal dichalcogenides and hexagonal boron nitride (hBN), have been difficult due to the small excitation volume that interacts with high-energy electron beams (e-beams). Herein, distinct CL signals from a monolayer hBN, namely mBN, epitaxial film grown on a highly oriented pyrolytic graphite substrate are shown by using a home-made CL system capable of large-area and surface-sensitive excitation by an e-beam. The spatially resolved CL spectra at 13 K exhibited a predominant 5.5-eV emission band, which has been ascribed to originate from multilayered aggregates of hBN, markedly at thicker areas formed on the step edges of the substrate. Conversely, a faint peak at 6.04 eV was routinely observed from atomically flat areas. Since the energy agreed with the PL peak of 6.05 eV at 10 K that has been assigned as being due to the recombination of phonon-assisted direct excitons of mBN by Elias et al. [Nat. Commun. 10, 2639 (2019)], the CL peak at 6.04 eV is attributed to originate from the mBN epilayer. The CL results support the transition from indirect bandgap in bulk hBN to direct bandgap in mBN, in analogy with molybdenum disulfide. The results also encourage to elucidate emission properties of other low-dimensional materials with reduced excitation volumes by using the present CL configuration.

cond-mat.mtrl-sci

Increased surface flashover voltage in microfabricated devices

With the demand for improved performance in microfabricated devices, the necessity to apply greater electric fields and voltages becomes evident. When operating in vacuum, the voltage is typically limited by surface flashover forming along the surface of a dielectric. By modifying the fabrication process we have discovered it is possible to more than double the flashover voltage. Our finding has significant impact on the realization of next-generation micro- and nano-fabricated devices and for the fabrication of on-chip ion trap arrays for the realization of scalable ion quantum technology.

cond-mat.mtrl-sci

Nonlinear modal coupling in a high-stress doubly-clamped nanomechanical resonator

We present results from a study of the nonlinear intermodal coupling between different flexural vibrational modes of a single high-stress, doubly-clamped silicon nitride nanomechanical beam. The measurements were carried out at 100 mK and the beam was actuated using the magnetomotive technique. We observed the nonlinear behavior of the modes individually and also measured the coupling between them by driving the beam at multiple frequencies. We demonstrate that the different modes of the resonator are coupled to each other by the displacement induced tension in the beam, which also leads to the well known Duffing nonlinearity in doubly-clamped beams.

cond-mat.mes-hall

Real-space imaging of quantum Hall effect edge strips

We use dynamic scanning capacitance microscopy (DSCM) to image compressible and incompressible strips at the edge of a Hall bar in a two-dimensional electron gas (2DEG) in the quantum Hall effect (QHE) regime. This method gives access to the complex local conductance, Gts, between a sharp metallic tip scanned across the sample surface and ground, comprising the complex sample conductance. Near integer filling factors we observe a bright stripe along the sample edge in the imaginary part of Gts. The simultaneously recorded real part exhibits a sharp peak at the boundary between the sample interior and the stripe observed in the imaginary part. The features are periodic in the inverse magnetic field and consistent with compressible and incompressible strips forming at the sample edge. For currents larger than the critical current of the QHE break-down the stripes vanish sharply and a homogeneous signal is recovered, similar to zero magnetic field. Our experiments directly illustrate the formation and a variety of properties of the conceptually important QHE edge states at the physical edge of a 2DEG.

cond-mat.mes-hall

Spin polarization of (Ga,Mn)As measured by Andreev Spectroscopy: The role of spin-active scattering

We investigate the spin-polarization of the ferromagnetic semiconductor (Ga,Mn)As by point contact Andreev reflection spectroscopy. The conductance spectra are analyzed using a recent theoretical model that accounts for momentum- and spin-dependent scattering at the interface. This allows us to fit the data without resorting, as in the case of the standard spin-dependent Blonder-Tinkham-Klapwijk (BTK) model, to an effective temperature or a statistical distribution of superconducting gaps. We find a transport polarization PC{\approx}57%, in considerably better agreement with the k{\cdot}p kinetic-exchange model of (Ga,Mn)As, than the significantly larger estimates inferred from the BTK model. The temperature dependence of the conductance spectra is fully analyzed.

cond-mat.mtrl-sci

Dissipation due to tunneling two-level systems in gold nanomechanical resonators

We present measurements of the dissipation and frequency shift in nanomechanical gold resonators at temperatures down to 10 mK. The resonators were fabricated as doubly-clamped beams above a GaAs substrate and actuated magnetomotively. Measurements on beams with frequencies 7.95 MHz and 3.87 MHz revealed that from 30 mK to 500 mK the dissipation increases with temperature as $T^{0.5}$, with saturation occurring at higher temperatures. The relative frequency shift of the resonators increases logarithmically with temperature up to at least 400 mK. Similarities with the behavior of bulk amorphous solids suggest that the dissipation in our resonators is dominated by two-level systems.

cond-mat.mes-hall

Low-temperature and high magnetic field dynamic scanning capacitance microscope

We demonstrate a dynamic scanning capacitance microscope (DSCM) that operates at large bandwidths, cryogenic temperatures and high magnetic fields. The setup is based on a non-contact atomic force microscope (AFM) with a quartz tuning fork sensor with non-optical excitation and read-out for topography, force and dissipation measurements. The metallic AFM tip forms part of an rf resonator with a transmission characteristics modulated by the sample properties and the tip-sample capacitance. The tip motion gives rise to a modulation of the capacitance at the frequency of the AFM sensor and its harmonics, which can be recorded simultaneously with the AFM data. We use an intuitive model to describe and analyze the resonator transmission and show that for most experimental conditions it is proportional to the complex tip-sample conductance, which depends on both the tip-sample capacitance and the sample resistivity. We demonstrate the performance of the DSCM on metal disks buried under a polymer layer and we discuss images recorded on a two-dimensional electron gas in the quantum Hall effect regime, i.e. at cryogenic temperatures and high magnetic fields, where we directly image the formation of compressible stripes at the physical edge of the sample.

physics.ins-det

Anisotropic magnetic field dependence of many-body enhanced electron tunnelling through a quantum dot

We investigate the effect of an applied magnetic field on resonant tunneling of electrons through the bound states of self-assembled InAs quantum dots (QDs) embedded within an (AlGa)As tunnel barrier. At low temperatures (no more than 2 K), a magnetic field B applied either parallel or perpendicular to the direction of current flow causes a significant enhancement of the tunnel current. For the latter field configuration, we observe a strong angular anisotropy of the enhanced current when B is rotated in the plane of the quantum dot layer. We attribute this behavior to the effect of the lowered symmetry of the QD eigenfunctions on the electron-electron interaction.

cond-mat.mes-hall

1/f noise in a dilute GaAs two-dimensional hole system in the insulating phase

We have measured the resistance and the 1/f resistance noise of a two-dimensional low density hole system in a high mobility GaAs quantum well at low temperature. At densities lower than the metal-insulator transition one, the temperature dependence of the resistance is either power-like or simply activated. The noise decreases when the temperature or the density increase. These results contradict the standard description of independent particles in the strong localization regime. On the contrary, they agree with the percolation picture suggested by higher density results. The physical nature of the system could be a mixture of a conducting and an insulating phase. We compare our results with those of composite thin films.

cond-mat.dis-nn

1/f Noise In Low Density Two-Dimensional Hole Systems In GaAs

Two-dimensional electron or hole systems in semiconductors offer the unique opportunity to investigate the physics of strongly interacting fermions. We have measured the 1/f resistance noise of two-dimensional hole systems in high mobility GaAs quantum wells, at densities below that of the metal-insulator transition (MIT) at zero magnetic field. Two techniques voltage and current fluctuations were used. The normalized noise power SR/R2 increases strongly when the hole density or the temperature are decreased. The temperature dependence is steeper at the lowest densities. This contradicts the predictions of the modulation approach in the strong localization hopping transport regime. The hypothesis of a second order phase transition or percolation transition at a density below that of the MIT is thus reinforced.

cond-mat.dis-nn

Resistance noise scaling in a 2D system in GaAs

The 1/f resistance noise of a two-dimensional (2D) hole system in a high mobility GaAs quantum well has been measured on both sides of the 2D metal-insulator transition (MIT) at zero magnetic field (B=0), and deep in the insulating regime. The two measurement methods used are described: I or V fixed, and measurement of resp. V or I fluctuations. The normalized noise magnitude SR/R^2 increases strongly when the hole density is decreased, and its temperature (T) dependence goes from a slight increase with T at the largest densities, to a strong decrease at low density. We find that the noise magnitude scales with the resistance, SR /R^2 ~ R^2.4. Such a scaling is expected for a second order phase transition or a percolation transition. The possible presence of such a transition is investigated by studying the dependence of the conductivity as a function of the density. This dependence is consistent with a critical behavior close to a critical density p* lower than the usual MIT critical density pc.

cond-mat.str-el

Resistance Noise Scaling in a Dilute Two-Dimensional Hole System in GaAs

We have measured the resistance noise of a two-dimensional (2D)hole system in a high mobility GaAs quantum well, around the 2D metal-insulator transition (MIT) at zero magnetic field. The normalized noise power $S_R/R^2$ increases strongly when the hole density p_s is decreased, increases slightly with temperature (T) at the largest densities, and decreases strongly with T at low p_s. The noise scales with the resistance, $S_R/R^2 \sim R^{2.4}$, as for a second order phase transition such as a percolation transition. The p_s dependence of the conductivity is consistent with a critical behavior for such a transition, near a density p* which is lower than the observed MIT critical density p_c.

cond-mat.str-el

A theory of phonon spectroscopy in the fractional quantum Hall regime

We describe a theoretical framework for the interpretation of time-resolved phonon absorption experiments carried out in the fractional quantum Hall regime of a magnetically quantized two-dimensional electron system (2des). The only phonons which can be absorbed at low temperature are those whose energies exceed the magnetoroton gap predicted by Girvin, MacDonald and Platzman. The rate of energy transfer from the phonons to the electron liquid is entirely controlled by the creation of these collective excitations. Using simple isotropic approximations for the phonon propagation and electron-phonon coupling we obtain analytic results for the regime in which the electron temperature and the characteristic temperature of the phonons are much less than the gap and identify the way in which the dispersion curve of the magnetorotons could be extracted from time and angle resolved experiments.

cond-mat.mes-hall