arXiv subjects

C. Puglia

Publications and source records attributed to C. Puglia.

9 recordsLinked to original sources

arXiv2026

Background of the BULLKID detector array operated with moderate shield on surface

We present the operation with moderate radiation shield in a surface laboratory of BULLKID (BULky and Low-threshold Kinetic Inductance Detector), a cryogenic detector for searches of light Dark Matter or Coherent Elastic Neutrino-Nucleus Scattering. The detector consists of an array of 60 cubic silicon particle absorbers of 0.34 g each, sensed by cryogenic kinetic inductance detectors. The analysis presented focuses on data from 15 elements of the array, with two central units used to evaluate the background and with their surrounding elements used as veto. The low energy spectrum resulting from an exposure of 290 hours to ambient backgrounds, acquired with the use of external and internal radiation shields, is compatible with the simulations at the level of $(6.8\pm0.4\,{\rm stat.}\pm0.1\,{\rm syst.})\times10^4$ counts / keV kg days from 2 keV down to an energy of 600 eV. The region between 225 eV and 600 eV shows a rise in background in disagreement with the simulations, while not sharing some of the key traits of the low energy excess observed in other cryogenic experiments. The high energy spectrum shape is in overall agreement with the simulations and displays the typical particle-induced X-ray emission of the surrounding lead.

hep-ex↗

arXiv2026

Superconducting properties of lifted-off Niobium nanowires

Hybrid superconductor/semiconductor devices play a crucial role in advancing quantum science and technology by merging the properties of superconductors and semiconductors. To operate these devices at high temperature, Niobium could substitute the widespread aluminum as superconducting element. Niobium devices show the best superconducting properties when shaped by etching, but this technique is often incompatible with semiconductors and two-dimensional materials. Our work investigates the influence of oxygen diffusion on the superconducting transition of Nb nanowires fabricated by lift-off technique. To this scope, we fabricate and measure Nb devices of different width (W) and thickness (t). By using the Berezinskii-Kosterlitz-Thouless (BKT) model for charge transport, we demonstrate that our nanowires behave as two-dimensional superconductors regardless of W and t. While the normal-state transition temperature (TN) remains constant with decreasing W, the temperature of the fully superconducting state (TS) decreases. Thus, the superconducting transition width ({\delta}TC) increases as W shrinks, due to oxygen diffusion from the lithography resist occurring during deposition. These insights provide essential knowledge for optimizing Nb-based hybrid quantum devices, paving the way for operating temperatures above 2 K and contributing to the development of next-generation quantum technologies.

cond-mat.supr-con↗

arXiv2026

Projected sensitivity to light WIMP-like particles of the BULLKID-DM experiment

BULLKID-DM is an experiment designed for the direct searches of particle dark matter candidates with mass around 1 GeV, or below, and cross-section with nucleons smaller than $10^{-40}$ cm$^2$. The detector consists of a stack of diced silicon wafers, acting as arrays of particle absorbers, sensed by multiplexed Kinetic Inductance Detectors. The target will amount to 800 g subdivided in more than 2000 silicon dice, with the aim of controlling the background from natural radioactivity by creating a fully active structure and by applying fiducialization techniques. In this work we present the projected sensitivity of BULLKID-DM to light WIMP-like particles considering also the other future experiments in the field.

physics.ins-det↗

arXiv2025

Energy calibration of bulk events in the BULLKID detector

BULLKID is a cryogenic, solid-state detector designed for direct searches of particle Dark Matter candidates, with mass $\lesssim 1$ GeV/c$^2$, and coherent neutrino-nucleus scattering. It is based on an array of dice carved in 5 mm thick silicon crystal, sensed by phonon-mediated Kinetic Inductance Detectors. In previous works, the array was calibrated with bursts of optical photons, which are absorbed in the first hundreds nanometers of the dice and give rise to surface events. In this work, we present the reconstruction of bulk events through the 59.5 keV $\gamma$-ray generated by an $^{241}$Am source, which emulates more closely the interaction of Dark Matter and neutrinos. The peak resolution is $5\%~(\sigma)$ and its position is shifted by less than $10\%$ with respect to the optical calibration. We observe that the resolution is further improved by a factor $2$ combining the signal from neighboring dice. These results confirm the performance of the detector in view of the physics goals of the BULLKID-DM experiment for dark matter search.

physics.ins-det↗

arXiv2025

Real-Time Readout System Design for the BULLKID-DM Experiment: Enhancing Dark Matter Search Capabilities

The BULLKID-DM experiment aims to detect WIMP-like potential Dark Matter particles with masses below 1 GeV/c^2. Sensing these particles is challenging, as it requires nuclear recoil detectors characterized by high exposure and an energy threshold in the order of 100 eV, thus exceeding the capabilities of conventional semiconductor detectors. BULLKID-DM intends to tackle this challenge by using cryogenic Kinetic Inductance Detectors (MKIDs) with exceptional energy thresholds to sense a target with a total mass of 800 g across 16 wafers, divided into over 2000 individually instrumented silicon dice. The MKIDs on each wafer are coupled to a single transmission line and read using a frequency division multiplexing approach by the room-temperature data acquisition. In this contribution, we describe and assess the design of the room-temperature readout electronics system, including the selected hardware components and the FPGA firmware which contains the real-time signal processing stages for tone generation, frequency demultiplexing, and event triggering. We evaluate the system on the ZCU216 board, a commercial evaluation card built around a Radio-Frequency System-on-Chip (RFSoC) with integrated high-speed DACs and ADCs, and connected it to a custom-designed analog front-end for signal conditioning.

physics.ins-det↗

arXiv2025

Highly-Linear Proximity-Based Bi-SQUID Operating above 4 K

We demonstrate a highly linear superconducting quantum interference device (SQUID) amplifier based on a double-loop (Bi-SQUID) architecture incorporating three superconductor-normal metal-superconductor (S-N-S) junctions. Fabricated using niobium-gold technology, the device exhibits robust operation at liquid helium temperatures, with a superconducting transition temperature of 8.5 K. The flux-to-voltage transfer function demonstrates sharp, symmetric, and highly linear behavior at temperatures up to 5 K. Bi-SQUIDs featuring our single-element S-N-S design represent an interesting and original approach to this field, as they demonstrate a numerically estimated spurious-free dynamic range (SFDR) linearity exceeding 60 dB, achieved in a single element, simplifying the requirements in terms of arrays containing hundreds of junctions. These results highlight the potential of proximity-based Bi-SQUIDs for compact, low-noise, and highly linear cryogenic amplifiers in quantum sensing, magnetometry, and biomedical diagnostics.

cond-mat.supr-con↗

arXiv2021

Gate-controlled Suspended Titanium Nanobridge Supercurrent Transistor

In a family of experiments carried on all-metallic supercurrent nano-transistors a surprising gating effect has been recently shown. These include the full suppression of the critical supercurrent, the increase of quasiparticle population, the manipulation of the superconducting phase, and the broadening of the switching current distributions. Aside from the high potential for future applications, these findings raised fundamental questions on the origin of these phenomena. To date, two complementary hypotheses are under debate: an electrostatically-triggered orbital polarization at the superconductor surface, or the injection of highly-energetic quasiparticles extracted from the gate. Here, we tackle this crucial issue via a fully suspended gate-controlled Ti nano-transistor. Our geometry allows to eliminate any direct injection of quasiparticles through the substrate thereby making cold electron field emission through the vacuum the only possible charge transport mechanism. With the aid of a fully numerical 3D model in combination with the observed phenomenology and thermal considerations we can rule out, with any realistic likelihood, the occurrence of cold electron field emission. Excluding these two trivial phenomena is pivotal in light of understanding the microscopic nature of gating effect in superconducting nanostructures, which represents an unsolved puzzle in contemporary superconductivity. Yet, from the technological point of view, our suspended fabrication technique provides the enabling technology to implement a variety of applications and fundamental studies combining, for instance, superconductivity with nano-mechanics.

cond-mat.mes-hall↗

arXiv2020

Vanadium gate-controlled Josephson half-wave nanorectifier

Recently, the possibility to tune the critical current of conventional metallic superconductors via electrostatic gating was shown in wires, Josephson weak-links and superconductor-normal metal-superconductor junctions. Here we exploit such a technique to demonstrate a gate-controlled vanadium-based Dayem nano-bridge operated as a \emph{half-wave} rectifier at $3$ K. Our devices exploit the gate-driven modulation of the critical current of the Josephson junction, and the resulting steep variation of its normal-state resistance, to convert an AC signal applied to the gate electrode into a DC one across the junction. All-metallic superconducting gated rectifiers could provide the enabling technology to realize tunable photon detectors and diodes useful for superconducting electronics circuitry.

cond-mat.mes-hall↗

arXiv2020

Electrostatic control of phase slips in Ti Josephson nanotransistors

The investigation of the switching current probability distribution of a Josephson junction is a conventional tool to gain information on the phase slips dynamics as a function of the temperature. Here we adopt this well-established technique to probe the impact of an external static electric field on the occurrence of phase slips in gated all-metallic titanium (Ti) Josephson weak links. We show, in a temperature range between 20 mK and 420 mK, that the evolution of the phase slips dynamics as a function of the electrostatic field starkly differs from that observed as a function of the temperature. This fact demonstrates, on the one hand, that the electric field suppression of the critical current is not simply related to a conventional thermal-like quasiparticle overheating in the weak-link region. On the other hand, our results may open the way to operate an electrostatic-driven manipulation of phase slips in metallic Josephson nanojunctions, which can be pivotal for the control of decoherence in superconducting nanostructures.

cond-mat.mes-hall↗