arXiv subjects

C. Tarantini

Publications and source records attributed to C. Tarantini.

At least 19 recordsLinked to original sources

arXiv2022

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility.

physics.acc-ph↗

arXiv2022

Fe-based high field superconductors for cost-effective future accelerator magnets

We propose a targeted attack on making the Fe-based superconductor (FBS) AEFe2As2 (122) (AE = alkaline earth, here Ba or Sr) into a much cheaper, higher stability margin, round, twisted and effectively isotropic multifilament conductor suitable for 16-20 T dipole magnet construction. This white paper urges to greatly accelerate progress by providing a fundamental understanding of what controls the transport critical current density, Jc, of 122 polycrystals and then in the wire forms. High grain-to-grain Jc is the one key property not yet fully demonstrated in this new superconductor and this is the key breakthrough that would make 122 practical. Whereas the intragrain (i.e. vortex pinning) Jc is already high enough to replace Nb3Sn, our recent work strongly suggests that unpredictable superconducting connectivity at grain boundaries (GBs) is the critical problem that limits the long-range Jc. We strongly emphasize the need to evaluate the true intrinsic nature of GBs in the polycrystalline forms before focusing on the wire fabrication.

cond-mat.supr-con↗

arXiv2018

Effect of $α$-particle irradiation on a NdFeAs(O,F) thin film

The effect of $α$-particle irradiation on a NdFeAs(O,F) thin film has been investigated to determine how the introduction of defects affects basic superconducting properties, including the critical temperature $T_c$ and the upper critical field $H_{c2}$, and properties more of interest for applications, like the critical current density $J_c$ and the related pinning landscape. The irradiation-induced suppression of the film $T_c$ is significantly smaller than on a similarly damaged single crystal. Moreover $H_{c2}$ behaves differently, depending on the field orientation: for H//c the $H_{c2}$ slope monotonically increases with increasing disorder, whereas for H//ab it remains constant at low dose and it increases only when the sample is highly disordered. This suggests that a much higher damage level is necessary to drive the NdFeAs(O,F) thin film into the dirty limit. Despite the increase in the low temperature $H_{c2}$, the effects on the $J_c$(H//c) performances are moderate in the measured temperature and field ranges, with a shifting of the pinning force maximum from 4.5 T to 6 T after an irradiation of $2\times10^{15} cm^{-2}$. On the contrary, $J_c$(H//ab) is always suppressed. The analysis demonstrates that irradiation does introduce point defects acting as pinning centres proportionally to the irradiation fluence but also suppresses the effectiveness of c-axis correlated pinning present in the pristine sample. We estimate that significant performance improvements may be possible at high field or at temperatures below 10 K. The suppression of the $J_c$(H//ab) performance is not related to a decrease of the $J_c$ anisotropy as found in other superconductors. Instead it is due to the presence of point defects that decrease the efficiency of the ab-plane intrinsic pinning typical of materials with a layered structure.

cond-mat.supr-con↗

arXiv2017

Selective mass enhancement close to the quantum critical point in BaFe$_2$(As$_{1-x}$P$_x$)$_2$

A quantum critical point (QCP) is currently being conjectured for the BaFe$_2$(As$_{1-x}$P$_x$)$_2$ system at the critical value $x_{\rm c} \approx$ 0.3. In the proximity of a QCP, all thermodynamic and transport properties are expected to scale with a single characteristic energy, given by the quantum fluctuations. Such an universal behavior has not, however, been found in the superconducting upper critical field $H_{\rm c2}$. Here we report $H_{\rm c2}$-data for epitaxial thin films extracted from the electrical resistance measured in very high magnetic fields up to 67 Tesla. Using a multi-band analysis we find that $H_{\rm c2}$ is sensitive to the QCP, implying a significant charge carrier effective mass enhancement at the doping-induced QCP that is essentially band-dependent. Our results point to two qualitatively different groups of electrons in BaFe$_2$(As$_{1-x}$P$_x$)$_2$. The first one (possibly associated to hot spots or whole Fermi sheets) has a strong mass enhancement at the QCP, and the second one is insensitive to the QCP. The observed duality could also be present in many other quantum critical systems.

cond-mat.supr-con↗

arXiv2016

Intrinsic and extrinsic pinning in NdFeAs(O,F): vortex trapping and lock-in by the layered structure

The Fe-based superconductors (FBS) present a large variety of compounds whose properties are affected to different extents by their crystal structures. Amongst them, the $\it{RE}$FeAs(O,F) ($\it{RE}$1111, where $\it{RE}$ is a rare earth element) is the family with the highest critical temperature $T_c$ but also with a large anisotropy and Josephson vortices as demonstrated in the flux-flow regime in Sm1111 ($T_c$ $\sim$ 55 K). Here we focus our attention on the pinning properties of the lower-$T_c$ Nd1111 in the flux-creep regime. We demonstrate that for H//c critical current density $J_c$ at high temperatures is dominated by point-defect pinning centres, whereas at low temperatures surface pinning by planar defects parallel to the $\it{c}$-axis and vortex shearing prevail. When the field approaches the $\it{ab}$-planes, two different regimes are observed at low temperatures as a consequence of the transition between 3D-Abrikosov and 2D-Josephson vortices: one is determined by the formation of a vortex staircase structure and one by lock-in of the vortices parallel to the layers. This is the first study on FBS showing this behaviour in a full temperature, field, and angular range and it demonstrates that, despite the lower $T_c$ and anisotropy of Nd1111 with respect to Sm1111, this compound is substantially affected by intrinsic pinning generating a strong $\it{ab}$-peak in $J_c$.

cond-mat.supr-con↗

arXiv2016

Significant enhancement of compositional and superconducting homogeneity in Ti rather than Ta-doped Nb3Sn

Nb3Sn wires are now very close to their final optimization but despite its classical nature, detailed understanding of the role of Ta and Ti doping in the A15 is not fully understood. Long thought to be essentially equivalent in their influence on Hc2, they were interchangeably applied. Here we show that Ti produces significantly more homogeneous chemical and superconducting properties. Despite Ta-doped samples having a slightly higher Tc onset in zero-field, they always have a wider Tc-distribution. In particular, whereas the Ta-doped A15 has a Tc-distribution extending from 18 down to 5-6 K (the lowest expected Tc for the binary A15 phase), the Ti-doped samples have no A15 phase with Tc below 12 K. The much narrower Tc distribution in the Ti-doped samples has a positive effect on their in-field Tc-distribution too, leading to an extrapolated Hc2(0) 2 Tesla larger than the Ta-doped one. Ti-doping also appears to be very homogeneous even when the Sn content is reduced in order to inhibit breakdown of the diffusion barriers in very high Jc conductors. The enhanced homogeneity of the Ti-doped samples appears to result from its assistance of rapid diffusion of Sn into the filaments and by its incorporation into the A15 phase interchangeably with Sn on the Sn sites of the A15 phase.

cond-mat.supr-con↗

arXiv2015

Unusually high critical current of clean P-doped BaFe2As2 single crystalline thin film

Microstructura lly clean, isov alently P-doped BaFe2As2 (Ba-122) single crystalline thin films have been prepared on MgO (001) substrates by molecular beam epitaxy. These films show a superconducting transition temperature (Tc) of over 30 K although P content is around 0.22, which is lower than the optimal one for single crystals (i.e., 0.33). The enhanced Tc at this doping level is attributed to the in-plane tensile strain. The strained film shows high transport self-field critical current densities (Jc) of over 6 MA/cm2 at 4.2 K, which are among the highest for Fe based superconductors (FeSCs). In-field Jc exceeds 0.1 MA/cm2 at m0H = 35 T for H||ab and m0H = 18 T for H||c at 4.2 K, respectively, in spite of moderate upper critical fields compared to other FeSCs with similar Tc. Structural investigations reveal no defects or misoriented grains pointing to strong pinning centers. We relate this unexpected high Jc to a strong enhancement of the vortex core energy at optimal Tc, driven by in-plane strain and doping. These unusually high Jc make P-doped Ba-122 very favorable for high-field magnet applications.

cond-mat.supr-con↗

arXiv2014

Development of very high Jc in Ba(Fe1-xCox)2As2 thin films grown on CaF2

Ba(Fe1-xCox)2As2 is the most tunable of the Fe-based superconductors (FBS) in terms of acceptance of high densities of self-assembled and artificially introduced pinning centres which are effective in significantly increasing the critical current density, Jc. Moreover, FBS are very sensitive to strain, which induces an important enhancement in critical temperature, Tc, of the material. In this paper we demonstrate that strain induced by the substrate can further improve Jc of both single and multilayer films by more than that expected simply due to the increase in Tc. The multilayer deposition of Ba(Fe1-xCox)2As2 on CaF2 increases the pinning force density Fp by more than 60% compared to a single layer film, reaching a maximum of 84 GN/m^3 at 22.5T and 4.2 K, the highest value ever reported in any 122 phase.

cond-mat.supr-con↗

arXiv2014

Examination of the tradeoff between intrinsic and extrinsic properties in the optimization of a modern internal tin Nb3Sn conductor

In modern Nb3Sn wires there is a fundamental compromise to be made between optimizing the intrinsic properties associated with the superfluid density in the A15 phase (e.g. Tc, Hc, Hc2, all of which are composition dependent), maximizing the quantity of A15 that can be formed from a given mixture of Nb, Sn and Cu, minimizing the A15 composition gradients within each sub-element, while at the same time generating a high vortex pinning critical current density, Jc, by maximizing the grain boundary density with the additional constraint of maintaining the RRR of the Cu stabilizer above 100. Here we study these factors in a Ta-alloyed Restacked-Rod-Process (RRP) wire with ~70 microns diameter sub-elements. Consistent with many earlier studies, maximum non-Cu Jc(12T,4.2K) requires preventing A15 grain growth, rather than by optimizing the superfluid density. In wires optimized for 12T, 4.2K performance, about 60% of the non-Cu cross-section is A15, 35% residual Cu and Sn core, and only 5% a residual Nb7.5wt.%Ta diffusion barrier. The specific heat and chemical analyses show that in this 60% A15 fraction there is a wide range of Tc and chemical composition that does diminish for higher heat treatment temperatures, which, however, are impractical because of the strong RRR degradation that occurs when only about 2% of the A15 reaction front breaches the diffusion barrier. As this kind of Nb3Sn conductor design is being developed for sub-elements 1/2 the present size, it is clear that better barriers are essential to allowing higher temperature reactions with better intrinsic A15 properties. We present here multiple and detailed intrinsic and extrinsic evaluations because we believe that only such broad and quantitative descriptions are capable of accurately tracking the limitations of individual conductor designs where optimization will always be a compromise between inherently conflicting goals

cond-mat.supr-con↗

arXiv2013

Artificially engineered superlattices of pnictide superconductor

Significant progress has been achieved in fabricating high quality bulk and thinfilm iron-based superconductors. In particular, artificial layered pnictide superlattices offer the possibility of tailoring the superconducting properties and understanding the mechanism of the superconductivity itself. For high field applications, large critical current densities (Jc) and irreversibility fields (Hirr) are indispensable along all crystal directions. On the other hand, the development of superconducting devices such as tunnel junctions requires multilayered heterostructures. Here we show that artificially engineered undoped Ba-122 / Co doped Ba-122 compositionally modulated superlattices produce ab-aligned nanoparticle arrays. These layer and self-assemble along c-axis aligned defects, and combine to produce very large Jc and Hirr enhancements over a wide angular range. We also demonstrate a structurally modulated SrTiO3 (STO) / Co doped Ba-122 superlattice with sharp interfaces. Success in superlattice fabrication involving pnictides will aid the progress of heterostructured systems exhibiting novel interfacial phenomena and device applications.

cond-mat.supr-con↗

arXiv2013

Anomalous hysteresis as an evidence for a magnetic field-induced chiral superconducting state in LiFeAs

Magnetometry measurements in high quality LiFeAs single-crystals reveal a change in the sign of the magnetic hysteresis in the vicinity of the upper critical field $H_{c2}$, from a clear diamagnetic response dominated by the pinning of vortices, to a considerably smaller net hysteretic response of opposite sign, which \emph{disappears} at $H_{c2}$. If the diamagnetic response at high fields results from pinned vortices and associated screening super-currents, this sign change must result from currents circulating in the opposite sense, which give rise to a small field-dependent magnetic moment \emph{below} $H_{c2}$. This behavior seems to be extremely sensitive to the sample quality or stoichiometry, as we have observed it only in a few fresh crystals, which also display the de Haas van Alphen-effect. We provide arguments against the surface superconductivity, the flux compression, and the random $π$ junction scenarios, which have been previously put forward to explain a paramagnetic Meissner effect, below the lower critical field $H_{c1}$. The observed anomalous hysteresis at high fields will be compatible with the existence of chiral gap wave-functions, which possess a field dependent magnetic moment. Within a Landau-Ginzburg framework, we demonstrate how a $(d_{x^2 - y^2} + id_{xy})$ or a $(p_x+ip_y)$ chiral superconducting component can be stabilized in the mixed state of $s_{\pm}$ superconductor, due to the combined effects of the magnetic field and the presence of competing pairing channels. The realization of a particular chiral pairing depends on the microscopic details of the strengths of the competing pairing channels.

cond-mat.supr-con↗

arXiv2012

Artificial and self-assembled pinning centers in Ba(Fe1-xCox)2As2 thin films as a route to very high current density

We report on the superior vortex pinning of single and multilayer Ba(Fe1-xCox)2As2 thin films with self-assembled c-axis and artificially introduced ab-plane pins. Ba(Fe1-xCox)2As2 can accept a very high density of pins (15-20 vol%) without Tc suppression. The matching field is greater than 12 T, producing a significant enhancement of the critical current density Jc, an almost isotropic Jc (Theta,20T) > 10^5 A/cm2, and global pinning force density Fp of about 50 GN/m^3. This scenario strongly differs from the high temperature cuprates where the addition of pins without Tc suppression is limited to 2-4 vol%, leading to small HIrr enhancements and improved Jc only below 3-5 Tesla.

cond-mat.supr-con↗

arXiv2012

High intergrain critical current density in fine-grain (Ba0.6K0.4)Fe2As2 wires and bulks

The K- and Co-doped BaFe2As2 (Ba-122) superconducting compounds are potentially useful for applications because they have upper critical fields (Hc2) of well over 50 T, Hc2 anisotropy Gamma < 2, and thin film critical current densities exceeding 1 MAcm-2 at 4.2 K. However, thin-film bicrystals of Co-doped Ba-122 clearly exhibit weak link behavior for [001] tilt misorientations of more than about 5 degrees, suggesting that textured substrates would be needed for applications, as in the cuprates. Here we present a contrary and very much more positive result in which untextured polycrystalline (Ba0.6K0.4)Fe2As2 bulks and round wires with high grain boundary density have transport critical current densities well over 0.1 MAcm-2 (SF, 4.2 K), more than 10 times higher than that of any other ferropnictide wire. The enhanced grain connectivity is ascribed to their much improved phase purity and to the enhanced vortex stiffness of this low-anisotropy compound (Gamma ~ 1-2) compared to YBa2Cu3O7-x (Gamma ~ 5).

cond-mat.supr-con↗

arXiv2012

Anisotropy of the irreversibility field for Zr-doped $(Y,Gd)Ba_2Cu_3O_{7-x}$ thin films up to 45T

The anisotropic irreversibility field B$_{Irr}$ of two $YBa_2Cu_3O_{7-x}$ thin films doped with additional rare earth (RE)=(Gd,Y) and Zr and containing strong correlated pins (splayed BaZrO$_{3}$ nanorods, and $RE_2O_3$ nanoprecipitates), has been measured over a very broad range up to 45T at temperatures 56 K<T<$T_c$. We found that the experimental angular dependence of $B_{Irr}(θ)$ does not follow the mass anisotropy scaling $B_{Irr}(θ)=B_{Irr}(0)(cos^2θ+γ^{-2}sin^2θ)^{-1/2}$, where $γ=(m_c/m_{ab})^{1/2}=5-6$ for the RE-doped $YBa_2Cu_3O_{7-x}$ (REBCO) crystals, m$_{ab}$ and m$_{c}$ are the effective masses along the ab plane and the c-axis, respectively, and $θ$ is the angle between B and the c-axis. For B parallel to the ab-planes and to the c-axis correlated pinning strongly enhances B$_{Irr}$, while at intermediate angles, $B_{Irr}(θ)$ follows the scaling behavior $B_{Irr}(θ)\propto(cos^2θ+γ_{RP}^2sin^2θ)^{1/2}$ with the effective anisotropy factor $γ_{RP}\approx3$ significantly smaller than the mass anisotropy would suggest. In spite of the strong effects of c-axis BaZrO$_{3}$ nanorods, we found even greater enhancements of B$_{Irr}$ for fields along the ab-planes than for fields parallel to the c-axis, as well as different temperature dependences of the correlated pinning contributions to B$_{Irr}$ for B//ab and B//c. Our results show that the dense and strong pins, which can now be incorporated into REBCO thin films in a controlled way, exert major and diverse effects on the measured vortex pinning anisotropy and the irreversibility field over wide ranges of B and T. In particular, we show that the relative contribution of correlated pinning to B$_{Irr}$ for B//c increases as the temperature increases due to the suppression of thermal fluctuations of vortices by splayed distribution of BaZrO$_{3}$ nanorods.

cond-mat.supr-con↗

arXiv2011

Significant enhancement of upper critical fields by doping and strain in Fe-based superconductors

We report measurements of Hc2(T) up to 85 Tesla on Ba1-xKxAs2Fe2 single crystals and FeSe1-xTex films tuned by doping and strain. We observed an Hc2 enhancement by nearly 25 T at 30 K for the optimally-doped Ba1-xKxAs2Fe2 as compared to the previous results and extraordinarily high slopes dHc2/dT = 250-500 T/K near Tc in FeSe1-xTex indicating an almost complete suppression of the orbital pair-breaking. Theoretical analysis of Hc2(T) in FeSe1-xTex and the optimally doped Ba1-xKxAs2Fe2 predicts an inhomogeneous Fulde-Ferrel-Larkin-Ovchinnikov state for H//ab and T < 3-10 K, and shows that Hc2 in multiband Fe based superconductor can be enhanced by doping and strain much more effectively than by the conventional way of increasing disorder.

cond-mat.supr-con↗

arXiv2011

The behavior of grain boundaries in the Fe-based superconductors

The Fe-based superconductors (FBS) are an important new class of superconducting materials. As with any new superconductor with a high transition temperature and upper critical field, there is a need to establish what their applications potential might be. Applications require high critical current densities, so the usefulness of any new superconductor is determined both by the capability to develop strong vortex pinning and by the absence or ability to overcome any strong current-limiting mechanisms of which grain boundaries in the cuprates are a cautionary example. In this review we first consider the positive role that grain boundary properties play in the metallic, low temperature superconductors and then review the theoretical background and current experimental data relating to the properties of grain boundaries in FBS polycrystals, bi-crystal thin films, and wires. Based on this evidence, we conclude that grain boundaries in FBS are weak linked in a qualitatively similar way to grain boundaries in the cuprate superconductors, but also that the effects are a little less marked. Initial experiments with the textured substrates used for cuprate coated conductors show similar benefit for the critical current density of FBS thin films too. We also note that the particular richness of the pairing symmetry and the multiband parent state in FBS may provide opportunities for grain boundary modification as a better understanding of their pairing state and grain boundary properties are developed.

cond-mat.supr-con↗

arXiv2010

Strong vortex pinning in Co-doped BaFe2As2 single crystal thin films

We report measurements of the field and angular dependences of Jc of truly epitaxial Co-doped BaFe2As2 thin films grown on SrTiO3/(La,Sr)(Al,Ta)O3 with different SrTiO3 template thicknesses. The films show Jc comparable to Jc of single crystals and a maximum pinning force Fp(0.6Tc) > 5 GN/m3 at H/Hirr ~ 0.5 indicative of strong vortex pinning effective up to high fields. Due to the strong correlated c-axis pinning, Jc for field along the c-axis exceeds Jc for H//ab plane, inverting the expectation of the Hc2 anisotropy. HRTEM reveals that the strong vortex pinning is due to a high density of nanosize columnar defects.

cond-mat.supr-con↗

arXiv2009

Weak-link behavior of grain boundaries in superconducting Ba(Fe1-xCox)2As2 bicrystals

We show that despite the low anisotropy, strong vortex pinning and high irreversibility field Hirr close to the upper critical field Hc2 of Ba(Fe1-xCox)2As2, the critical current density Jgb across [001] tilt grain boundaries (GBs) of thin film Ba(Fe1-xCox)2As2 bicrystals is strongly depressed, similar to high-Tc cuprates. Our results suggest that weak-linked GBs are characteristic of both cuprates and pnictides because of competing orders, low carrier density, and unconventional pairing symmetry.

cond-mat.supr-con↗