arXiv subjects

Cameron J. Kopas

Publications and source records attributed to Cameron J. Kopas.

13 recordsLinked to original sources

arXiv2026

Automating detection of Two-Level Systems in Superconducting Qubits

Microscopic two-level system (TLS) defects remain a primary mechanism of decoherence and operational instability in superconducting transmon qubits, necessitating scalable and automated methods for their characterization. Here, we present and benchmark two complementary analysis pipelines for extracting TLS statistics directly from time-resolved SWAP spectroscopy: one-dimensional decay-rate fitting (1D-DRF), which detects defects via localized enhancements in the qubit relaxation rate, and a deterministic, non-parametric computer-vision framework (2D-CV) that achieves two-dimensional spectral localization by exploiting the temporal persistence of coherent population suppression. We deploy both methods on SWAP spectroscopy measurements from 52 flux-tunable transmon qubits on Rigetti processors with and without moderate ($\sim 10\%$) post-fabrication frequency trimming via Alternating-Bias Assisted Annealing (ABAA). We show that both pipelines converge on a consistent global characterization of the defect landscape while exhibiting complementary sensitivity across distinct coupling regimes. Crucially, both methods independently reveal a count--loss decoupling under moderate annealing: while the total detectable TLS defect density remains statistically unchanged, the span-integrated dielectric loss is reduced by approximately a factor of two, demonstrating selective suppression of the most strongly dissipative defect channels. These results establish an automated, non-parametric analysis framework for high-throughput hardware diagnostics and provide a statistical baseline for post-fabrication defect engineering in large-scale superconducting quantum processors.

quant-ph↗

arXiv2026

Magneto-optical study of Nb thin films for superconducting qubits

Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g., two-level systems, TLS) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, $j_{c}$, in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract $j_{c}$ and correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.

cond-mat.supr-con↗

arXiv2026

Oxygen distribution and segregation at grain boundaries in Nb and Ta-encapsulated Nb thin films for superconducting qubits

We report on atomic-scale analyses of oxygen distribution and segregation at grain boundaries (GBs) of Nb and Ta-encapsulated Nb (Ta/Nb) thin films for superconducting qubits using atom-probe tomography (APT) and transmission electron microscopy (TEM). We observe oxygen segregation at grain boundaries (GBs) relative to the oxygen concentration within the grains for both Nb and Ta-capped Nb thin films for superconducting qubits and find that higher oxygen concentration in the interior of Nb grains lead to greater oxygen segregation levels at GBs. This finding emphasizes that controlling oxygen impurities in Nb during film deposition and fabrication processing is important to reduce the level of oxygen segregation at GBs in Nb. The enrichment factor (Cgb/Cgrain) for oxygen segregation at GBs in Nb is 2.7 (error bar: 0.3) for Nb films, and Ta-capped Nb thin films exhibit slightly reduced Nb GB enrichment factors of 2.3 (error bar: 0.3) while GBs in the Ta capping layer itself possess higher enrichment factors of 3.0 (error bar: 0.3). We hypothesize that the Ta capping layer can trap oxygen and thereby affect oxygen in-diffusion and segregation at GBs in the underlying Nb thin films. Finally, we find that increases in the oxygen concentration in both Nb grains and GBs correlate with a suppression in the critical temperature for superconductivity (Tc). Together, our comparative chemical and charge transport property analyses provide atomic-scale insights into a potential mechanism contributing to decoherence in superconducting qubits.

cond-mat.supr-con↗

arXiv2025

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.

quant-ph↗

arXiv2024

Enhanced Superconducting Qubit Performance Through Ammonium Fluoride Etch

The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median $\text{T}_1$ by $\sim22\%$ ($p=0.002$), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch prior to niobium deposition also show $\sim33\%$ lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials' differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS.

cond-mat.mtrl-sci↗

arXiv2024

Formation and Microwave Losses of Hydrides in Superconducting Niobium Thin Films Resulting from Fluoride Chemical Processing

Superconducting Nb thin films have recently attracted significant attention due to their utility for quantum information technologies. In the processing of Nb thin films, fluoride-based chemical etchants are commonly used to remove surface oxides that are known to affect superconducting quantum devices adversely. However, these same etchants can also introduce hydrogen to form Nb hydrides, potentially negatively impacting microwave loss performance. Here, we present comprehensive materials characterization of Nb hydrides formed in Nb thin films as a function of fluoride chemical treatments. In particular, secondary-ion mass spectrometry, X-ray scattering, and transmission electron microscopy reveal the spatial distribution and phase transformation of Nb hydrides. The rate of hydride formation is determined by the fluoride solution acidity and the etch rate of Nb2O5, which acts as a diffusion barrier for hydrogen into Nb. The resulting Nb hydrides are detrimental to Nb superconducting properties and lead to increased power-independent microwave loss in coplanar waveguide resonators. However, Nb hydrides do not correlate with two-level system loss or device aging mechanisms. Overall, this work provides insight into the formation of Nb hydrides and their role in microwave loss, thus guiding ongoing efforts to maximize coherence time in superconducting quantum devices.

cond-mat.mtrl-sci↗

arXiv2024

Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation

We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different capping materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When capping niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes.

quant-ph↗

arXiv2022

Anisotropic superconductivity of niobium based on its response to non-magnetic disorder

Niobium is one of the most studied superconductors, both theoretically and experimentally. It is tremendously important for applications, and it has the highest superconducting transition temperature, $T_{c}=9.33$ K, of all pure metals. In addition to power applications in alloys, pure niobium is used for sensitive magneto-sensing, radio-frequency cavities, and, more recently, as circuit metallization layers in superconducting qubits. A detailed understanding of its electronic and superconducting structure, especially its normal and superconducting state anisotropies, is crucial for mitigating the loss of quantum coherence in such devices. Recently, a microscopic theory of the anisotropic properties of niobium with the disorder was put forward. To verify theoretical predictions, we studied the effect of disorder produced by 3.5 MeV proton irradiation of thin Nb films grown by the same team and using the same protocols as those used in transmon qubits. By measuring the superconducting transition temperature and upper critical fields, we show a clear suppression of $T_{c}$ by potential (non-magnetic) scattering, which is directly related to the anisotropic order parameter. We obtain a very close quantitative agreement between the theory and the experiment.

cond-mat.supr-con↗

arXiv2022

Contactless Excitation of Acoustic Resonance in Insulating Wafers

Contactless excitation and detection of high harmonic acoustic overtones in a thin insulator single crystal are described using radio frequency spectroscopy techniques. Single crystal [001] silicon wafer samples were investigated, one side covered with a Nb thin film, the common starting point for fabrication of quantum devices. The coupling between electromagnetic signals and mechanical oscillation is achieved from the Lorentz force generated by an external magnetic field. This method is suitable for any sample with a metallic surface or covered with a thin metal film. High resolution measurements of the temperature dependence of the sound velocity and elastic constants of silicon are reported and compared with known results.

physics.app-ph↗

arXiv2022

Quasiparticle spectroscopy, transport, and magnetic properties of Nb films used in superconducting transmon qubits

Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and real-space real-time magneto-optical imaging. We study niobium films to provide an example of a comprehensive analytical set that may benefit superconducting circuits such as those used in quantum computers. The films show outstanding superconducting transition temperature of $T_{c}=9.35$ K and a fairly clean superconducting gap, along with superfluid density enhanced at intermediate temperatures. These observations are consistent with the recent theory of anisotropic strong-coupling superconductivity in Nb. However, the response to the magnetic field is complicated, exhibiting significantly irreversible behavior and insufficient heat conductance leading to thermo-magnetic instabilities. These may present an issue for further improvement of transmon quantum coherence. Possible mitigation strategies are discussed.

cond-mat.supr-con↗

arXiv2022

Simple coplanar waveguide resonator mask targeting metal-substrate interface

This white paper presents a single-layer mask, found at https://github.com/Boulder-Cryogenic-Quantum-Testbed/simple-resonator-mask. It is designed for fabrication of superconducting microwave resonators towards 1:1 comparisons of dielectric losses from the metal-substrate interface. Finite-element electromagnetic simulations are used to determine participation ratios of the four major regions of the on-chip devices, as well as to confirm lack of crosstalk between neighboring devices and demonstrate coupling tunability over three orders of magnitude. This mask is intended as an open-source community resource for facilitating precise and accurate comparisons of materials in the single-photon, millikelvin regime.

quant-ph↗

arXiv2022

Multi-modal electron microscopy study on decoherence sources and their stability in Nb based superconducting qubit

Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system defects at interfaces, such as the Nb/Si and Nb/air interface. One way to improve the Nb/air interface quality is by thermal annealing, as shown by extensive studies in 3D superconducting radio frequency (SRF) cavities. However, it is unclear how the microstructure and chemistry of the interface structures change during heat treatment. To address this knowledge gap, we comprehensively characterized Nb films deposited on Si wafers by physical vapor deposition, including (1) an Nb film from a transmon and (2) an Nb film without any patterning step, using an aberration-corrected transmission electron microscope. Both Nb films exhibit columnar growth with strong [110] textures. There is a double layer between the Nb film and Si substrate, which are amorphous niobium silicides with different Nb and Si concentrations. After in-situ heating of the heterostructure at 360°C inside the microscope, the composition of the double layers at the Nb-Si interface remains almost the same despite different thickness changes. The initial amorphous niobium oxide layer on Nb surface decomposes into face-centered cubic Nb nanograins in the amorphous Nb-O matrix upon heating.

cond-mat.mtrl-sci↗

arXiv2021

Low microwave loss in deposited Si and Ge thin-film dielectrics at single-photon power and low temperatures

Our study shows that deposited Ge and Si dielectric thin-films can exhibit low microwave losses at near single-photon powers and sub-Kelvin temperatures ($\approx$40 mK). This low loss enables their use in a wide range of devices, including low-loss coplanar, microstrip, and stripline resonators, as well as layers for device isolation, inter-wiring dielectrics, and passivation in microwave and Josephson junction circuit fabrication. We use coplanar microwave resonator structures with narrow trace widths of 2-16 $μ\textrm{m}$ to maximize the sensitivity of loss tangent measurements to the interface and properties of the deposited dielectrics, rather than to optimize the quality factor. In this configuration, thermally-evaporated $\approx 1 μ\textrm{m}$ thick amorphous germanium (a-Ge) films deposited on Si (100) have a single photon loss tangent of $1-2\times10^{-6}$ and, $9 μ\textrm{m}$-thick chemical vapor deposited (CVD) homoepitaxial Si has a single photon loss tangent of $0.6-2\times 10^{-5}$. Interface contamination limits the loss in these devices.

physics.app-ph↗