arXiv subjects

Carlos del Cañizo

Publications and source records attributed to Carlos del Cañizo.

6 recordsLinked to original sources

arXiv2026

Production of Upgraded Metallurgical Grade (UMG) silicon for a low-cost high-efficiency and reliable PV technology

UMG-Si has the potential to reduce the cost of PV technology and to improve its environmental profile. In this contribution, we summarize the extensive work made in the research and development of UMG technology for PV, which has led to the demonstration of UMG-Si as a competitive alternative to polysilicon for the production of high-efficiency multicrystalline solar cells and modules. The tailoring of the processing steps along the complete Ferrosolar's UMG-Si manufacturing value chain has been addressed, commencing with the purification stage that results in a moderately compensated material due to the presence of phosphorous and boron. Gallium is added as a dopant at the crystallization stage to obtain a uniform resistivity profile 1 Ohm*cm along the ingot height. Defect engineering techniques based on phosphorus diffusion gettering have been optimized to improve the bulk electronic quality of UMG-Si wafers. Black silicon texturing, compatible with subsequent gettering and surface passivation, has been successfully implemented. Industrial-type BSF and PERC solar cells have been fabricated, achieving cell efficiencies in the range of those obtained with conventional polysilicon substrates. TOPCon solar cell processing key steps have also been tested to further evaluate the potential of the material in advanced device architectures beyond PERC. Degradation mechanisms related to light exposure and operation temperature have been shown not to be significant in UMG PERC solar cells when a regeneration step is implemented, and PV modules with several years of outdoor operation have demonstrated similar performance to reference ones based on poly-Si. LCA has been carried out to evaluate the environmental impact of UMG-based PV technology when compared to the poly-Si-based one, considering different scenarios both for the manufacturing sites and the PV installations.

cond-mat.mtrl-sci↗

arXiv2022

High carrier lifetimes in UMG multicrystalline wafers after P- diffusion compatible with high-efficiency cell structures

High-quality multicrystalline Upgraded Metallurgical Grade Silicon (UMG-Si) offers significant advantages over conventional polysilicon-based PV technology, associated to lower cost, lower energy budget and lower carbon footprint. The aim of this study is twofold: on the one hand, to ascertain the efficiency potential of solar cells based on this material in terms of carrier lifetime; and on the other hand, to explore, as a result of that, the adoption of high-efficiency cell architectures by establishing an effective rear-side passivation scheme for the implementation of passivated emitter rear contact (PERC) devices. The carrier lifetime and the surface passivation efficacy are investigated for different passivating layer configurations after single and double P-diffusion gettering processes. Layer stacks consisting of Al2O3, SiOxNy and a-SiNx:H capping overlayers have been optimized, on industrial size, saw-damage-etched UMG wafers and results compared to those obtained using reference iodine-ethanol (IE) passivation. Diagnosis based on minority carrier lifetime and implied Voc (iVoc) measurements helped monitor the impact of parameter optimization on wafer quality, particularly after firing processes. Carrier lifetimes over 600 us at 10^15 cm-3 injection level as well as up to 790 us locally have been measured in UMG-Si wafers passivated with IE after a Phosphorus Diffusion Gettering (PDG), demonstrating the suitability of the material for high-efficiency cell architectures. Values higher than 300 us have been obtained with Al2O3-based passivation layers for gettered UMG wafers, with implied Voc values up to 710 mV. These record-breaking lifetimes and iVoc figures obtained with p-type multicrystalline UMG-Si material demonstrate a significant upgrading of its electronic quality by means of industry-scalable technical processes.

cond-mat.mtrl-sci↗

arXiv2021

Bulk carrier lifetime surpassing 600 us in Upgraded Metallurgical-grade Silicon multicrystalline wafers after Phosphorus Diffusion Gettering

Upgraded metallurgical-grade (UMG) Si is obtained via a purification route alternative to the one used for conventional polysilicon and with significantly reduced environmental impact. Additionally, despite a lower purity level in the feedstock than polysilicon, UMG-Si has demonstrated potential for the fabrication of highly efficient and low-cost solar cells. Low initial bulk carrier lifetimes recorded in UMG-Si bare wafers can be improved by means of an adequate Phosphorus Diffusion Gettering (PDG) process to the level of mc-Si. In this letter, optimized PDG processes for UMG-Si are reported, resulting in increased values between 20 and 250 times the original carrier lifetimes and record figures above 645 us.

cond-mat.mtrl-sci↗

arXiv2021

Phosphorous Diffusion Gettering of Trapping Centers in Upgraded Metallurgical-Grade Solar Silicon

Experimental evidence indicating the beneficial impact of a phosphorous diffusion gettering (PDG) in the reduction of trapping centers is shown, as observed by means of inductively coupled photoconductance (PC) decay and lifetime measurements carried out on upgraded metallurgical-grade silicon (UMG-Si) wafers. The presence of trapping species dominating the long time range of the PC decay of UMG material (slow traps), which is effectively removed after a PDG conducted at 780 Celsius, is detected. Notwithstanding, a second trapping mechanism, characterized by a shorter time constant, still governs the response at very low injection levels after the gettering. Furthermore, the beneficial effect of the PDG is studied as a function of processing time, showing minority carrier bulk lifetime improvements up to 18-fold, up to the range of 70 us. Thereby, the way for developing gettering strategies capable of successfully removing trap centers and improving the bulk lifetime of unconventional Si material is paved.

physics.app-ph↗

arXiv2019

How much physics is in a current-voltage curve? Inferring defect properties from photovoltaic device measurements

Defect-assisted recombination processes are critical to understand, as they frequently limit photovoltaic (PV) device performance. However, the physical parameters governing these processes can be extremely challenging to measure, requiring specialized techniques and sample preparation. And yet the fact that they limit performance as measured by current-voltage (JV) characterization indicates that they must have some detectable signal in that measurement. In this work, we use numerical device models that explicitly account for these parameters with high-throughput JV measurements and Bayesian inference to construct probability distributions over recombination parameters, showing the ability to recover values consistent with previously-reported literature measurements. The Bayesian approach enables easy incorporation of data and models from other sources; we demonstrate this with temperature dependence of carrier capture cross-sections. The ability to extract these fundamental physical parameters from standardized, automated measurements on completed devices is promising for both established industrial PV technologies and newer research-stage ones.

physics.app-ph↗

arXiv2019

Techno-economic analysis of solar PV power-to-heat-to-power storage and trigeneration in the residential sector

This article assesses whether it is profitable to store solar PV electricity in the form of heat and convert it back to electricity on demand. The impact of a number of technical and economic parameters on the profitability of a self-consumption residential system located in Madrid is assessed. The proposed solution comprises two kinds of heat stores: a low- or medium-grade heat store for domestic hot water and space heating, and a high-grade heat store for combined heat and power generation. Two cases are considered where the energy that is wasted during the conversion of heat into electricity is employed to satisfy either the heating demand, or both heating and cooling demands by using a thermally-driven heat pump. We compare these solutions against a reference case that relies on the consumption of grid electricity and natural gas and uses an electrically-driven heat pump for cooling. The results show that, under relatively favourable conditions, the proposed solution that uses an electrically-driven heat pump could provide electricity savings in the range of 70-90% with a payback period of 12-15 years, plus an additional 10-20% reduction in the fuel consumption. Shorter payback periods, lower than 10 years, could be attained by using a highly efficient thermally driven heat pump, at the expense of increasing the fuel consumption and the greenhouse gas emissions. Hybridising this solution with solar thermal heating could enable significant savings on the global emissions, whilst keeping a high amount of savings in grid electricity (> 70 %) and a reasonably short payback period (< 12 years).

physics.app-ph↗