arXiv subjects

Cecilia Laschi

Publications and source records attributed to Cecilia Laschi.

At least 19 recordsLinked to original sources

arXiv2026

To Coordinate or Not to Coordinate? Learning to Swim with Eight Soft Arms

Does effective swimming with multiple underactuated soft arms require explicit coordination between arms? We hypothesize that an eight-arm swimmer can control its swimming speed and direction by independently learning each arm's actuation amplitude under a shared rhythmic drive, without prescribed inter-arm phase coupling. To test this hypothesis, we compare three reinforcement learning-based control strategies using proximal policy optimization (PPO): (1) learning arm-specific actuation amplitudes without inter-arm phase coupling, (2) learning actuation amplitudes with prescribed inter-arm phase coupling, and (3) directly learning actuator commands through end-to-end PPO without an explicit rhythmic structure. Across 200 episodes with randomized three-dimensional velocity commands, the controller without phase coupling satisfies the tracking criterion in 169 episodes, compared with 117 for the phase-coupled controller and 28 for end-to-end PPO. Straight-line swimming and commanded direction-change trials further demonstrate more accurate velocity tracking without phase coupling. These findings suggest that effective eight-arm swimming does not require prescribed inter-arm phase coupling, but can instead be achieved through learned arm-specific amplitude modulation within a rhythmic control structure.

cs.RO↗

arXiv2026

Toward Trustworthy Physical AI for Human Interaction

Robots are entering human spaces faster than we can establish when they deserve trust. We propose a framework for trustworthy physical AI that integrates Safety, Behavioral Intelligibility, and Perceptual Alignment across embodiment, control, cognition, and design. Trustworthiness emerges from aligning physical capabilities, observable behavior, and expectations people form during interaction.

cs.RO↗

arXiv2026

Soft yet Effective Robots via Holistic Co-Design

Soft robots promise inherent safety via their material compliance for seamless interactions with humans or delicate environments. Despite progress, the field struggles to balance task-specific performance with broader factors like durability and manufacturability--a difficulty that we find is compounded by traditional sequential design processes with their lack of feedback loops. In this perspective, we review emerging co-design approaches that simultaneously optimize the soft robot's body and brain, enabling the discovery of unconventional designs highly tailored to the given tasks. Their adoption is limited by narrow objectives, gaps between simulated and real performance, and computational cost. To address these challenges, we propose a holistic co-design framework that incorporates a broader range of design values, integrates real-world prototyping to refine evaluations, and boosts efficiency through surrogate metrics and model-based control strategies. Finally, we outline research priorities in design priors and metrics, AI-assisted evaluation, and balancing computational refinement with physical testing and safety with performance.

cs.RO↗

arXiv2026

Cosserat Modeling of Trimmed Helicoid Soft Arms with a Separated-Section Constitutive Law

Cosserat rod models for soft robots usually construct sectional stiffness by summing material properties over a common cross-section. This assumption becomes inaccurate for trimmed helicoid arms, where load-bearing helix domains are separated and connected only through sparse fused crossings. This paper formulates a separated-section constitutive law that evaluates each helix domain in its local frame and pulls its constitutive response back to the backbone, yielding an effective backbone stiffness. Sparse-fusion mechanics captures the additional compliance caused by relative motion between neighboring domains and determines channel-wise reduction profiles $η_c(s/L)$ for bending, torsion, and extension. The resulting effective sectional stiffness is strongly anisotropic: bending and extension are reduced by about one order of magnitude, whereas torsion remains close to the effective backbone stiffness. The resulting sectional law is embedded in a geometrically exact dynamic Cosserat model with GVS discretization and routed-tendon actuation. Across 103 measured configurations, the three datasets give pooled normalized position errors of $7.7 \ \%$, $6.7 \ \%$, and $7.8 \ \%$, while each full-arm solve requires approximately $0.3 \ \mathrm{s}$ on one CPU core (Intel Xeon, Cascade Lake, $2.8 \mathrm{GHz}$), enabling rapid model-based planning, state and load estimation, and morphology--control co-design for architected soft robots.

cs.RO↗

arXiv2026

Embodied Snap: Octopus-Inspired Distributed Reach-and-Attach with a Speed-Limited Soft Arm

Reach-and-attach of soft robotic arms with passive suction requires accurate targeting and sufficient contact speed, yet geared actuators can impose a speed limit that improved trajectory tracking alone cannot overcome. This paper proposes an embodied snap controller that separates slow servo-driven preloading from rapid elastic release, enabling a compliant arm to move beyond its direct tendon-driven speed limit. Octopus biology motivates the controller's section-wise organizational prior, rather than reproduction of the octopus nervous system. A learned policy shared across three sections selects preloads, aim, tendon slack, and release timing, determining where, how, and when to load and release the body. The policy is optimized offline using a hardware-validated recurrent model within experimentally supported bounds. Across five optimization seeds and 400 unseen simulated targets, attachment success is $(73\pm4)\%$ at a $5\text{ cm}$ lateral tolerance, and the shared policy reaches the matched centralized controller's mean final reward after a median $17\%$ of the common evaluation budget. Hardware characterization achieves tip speeds of 1.56-1.64 m/s, at least $108\%$ above direct tendon-driven release. In 18 open-loop hardware trials across six placements, 17 exceed the 1 m/s snap threshold and nine retrieve the object, with successful retrieval at five placements. These results demonstrate a practical division of responsibility in the control problem: learned control prepares the body, and passive body mechanics execute the rapid movement needed for dynamic reach-and-attach.

cs.RO↗

arXiv2026

Safety Control of a Hyper-redundant Robot via Adaptive Weighted Control Barrier Functions

Hyper-redundant robots are well suited for confined-space manipulation due to their high dexterity, but safe operation in cluttered environments remains challenging. In addition, their slender structures often lead to uneven load distributions and nonuniform tracking errors along the body. To address these issues, this work proposes a weighted control barrier functions (W-CBFs) framework that enforces safety constraints while reducing tracking errors caused by uneven loading. The proposed controller was first evaluated on a circular path-following task under different obstacle configurations. With fixed weights, compared to the non-weighted method, the maximum reduction in root-mean-square (RMS) tracking error was 59.6\% in simulation and 87.7\% in physical experiments. An adaptive weighting strategy was then investigated based on the discrepancy between simulated and experimental performance under different mapping functions. The RMS errors were further reduced by 21.9\% and 8.5\%, respectively, although the error increases when obstacles were located close to the robot body. Finally, the robot was evaluated in a cleaning task requiring coverage of a rectangular area and compared with manual teleoperation. Although the controller was not explicitly optimized for area coverage, the autonomous strategy achieved comparable or better coverage performance while avoiding collisions with the surrounding frame, whereas collisions occurred during manual operation.

cs.RO↗

arXiv2026

Geometric Shortcuts for Complex Trunk Postures: Dual-Helicity Coupling Enables Low-Dimensional Control

How do elephant trunks generate complex postures without relying solely on fine segmental activation? We propose that part of this complexity arises from a low-dimensional geometric shortcut: dual-helicity coupling between opposite-handed oblique muscles. In a simplified soft-robotic prototype, varying only two geometric parameters generates a broad library of elephant-like postures, suggesting a dual-layer control architecture with implications for continuum robot design and biological hypotheses.

cs.RO↗

arXiv2026

A Quantitative Comparison of Centralised and Distributed Reinforcement Learning-Based Control for Soft Robotic Arms

This paper presents a quantitative comparison between centralised and distributed multi-agent reinforcement learning (MARL) architectures for controlling a soft robotic arm modelled as a Cosserat rod in simulation. Using PyElastica and the OpenAI Gym interface, we train both a global Proximal Policy Optimisation (PPO) controller and a Multi-Agent PPO (MAPPO) under identical budgets. Both approaches are based on the arm having $n$ number of controlled sections. The study systematically varies $n$ and evaluates the performance of the arm to reach a fixed target in three scenarios: default baseline condition, recovery from external disturbance, and adaptation to actuator failure. Quantitative metrics used for the evaluation are mean action magnitude, mean final distance, mean episode length, and success rate. The results show that there are no significant benefits of the distributed policy when the number of controlled sections $n\le4$. In very simple systems, when $n\le2$, the centralised policy outperforms the distributed one. When $n$ increases to $4< n\le 12$, the distributed policy shows a high sample efficiency. In these systems, distributed policy promotes a stronger success rate, resilience, and robustness under local observability and yields faster convergence given the same sample size. However, centralised policies achieve much higher time efficiency during training as it takes much less time to train the same size of samples. These findings highlight the trade-offs between centralised and distributed policy in reinforcement learning-based control for soft robotic systems and provide actionable design guidance for future sim-to-real transfer in soft rod-like manipulators.

cs.RO↗

arXiv2026

Octopus-inspired Distributed Control for Soft Robotic Arms: A Graph Neural Network-Based Attention Policy with Environmental Interaction

This paper proposes SoftGM, an octopus-inspired distributed control architecture for segmented soft robotic arms that learn to reach targets in contact-rich environments using online obstacle discovery without assuming full obstacle geometry at the start of each episode. SoftGM formulates each arm section as a cooperative agent and represents the arm-environment interaction as a graph. SoftGM uses a two-stage graph attention message passing scheme following a Centralised Training Decentralised Execution (CTDE) paradigm with a centralised critic and decentralised actor. We evaluate SoftGM in a Cosserat-rod simulator (PyElastica) across three tasks that increase the complexity of the environment: obstacle-free, structured obstacles, and a wall-with-hole scenario. Compared with six widely used MARL baselines (IDDPG, IPPO, ISAC, MADDPG, MAPPO, MASAC) under identical information content and training conditions, SoftGM matches strong CTDE methods in simpler settings and achieves the best performance in the wall-with-hole task. Robustness tests with observation noise, single-section actuation failure, and transient disturbances show that SoftGM maintains comparable performance under non-ideal simulated conditions while keeping control effort bounded, suggesting that selective contact-relevant information routing improves resilience in the tested settings.

cs.RO↗

arXiv2026

A Continual Learning Framework for Adaptive Control of Modular Soft Robots

Soft robots have attracted significant attention in applications such as medical intervention, rehabilitation, and robotic manipulation due to their inherent compliance, flexibility, and high degrees of freedom. Modular soft robots (MSRs), composed of multiple interconnected segments, represent an emerging class of robotic systems with highly deformable and reconfigurable structures capable of performing complex tasks. However, designing controllers for MSRs remains challenging due to their nonlinear dynamics, modeling complexity, and hyper-redundant nature. Existing approaches typically require controllers to be retrained from scratch whenever the robot morphology changes. In this work, we address these challenges through a continual learning inspired control framework capable of incrementally adapting to changes in robot morphology while preserving previously acquired knowledge. Specifically, the proposed framework enables the controller to sequentially learn new MSR configurations without forgetting previously learned ones. In addition, for MSRs with fixed configurations, the same framework can be employed in a distributed manner to learn module-specific dynamics, enabling localized control and improved precision. The proposed approach is validated through closed-loop trajectory tracking experiments in simulation using a tendon-driven soft robot, as well as on a real-world three-module pneumatic soft robotic arm. Furthermore, we demonstrate the adaptive capabilities of the framework through a reaching experiment in which the controller selectively activates only the necessary modules to reach a virtual target position, thereby reducing computational overhead.

cs.RO↗

arXiv2026

Unified Structural-Hydrodynamic Modeling of Underwater Underactuated Mechanisms and Soft Robots

Underwater robots are widely deployed for ocean exploration and manipulation. Underactuated mechanisms are advantageous in aquatic environments because reducing actuator count lowers motor-leakage risk while introducing inherent mechanical compliance. However, accurate modeling of underwater underactuated and soft robotic systems remains challenging, as it requires identifying high-dimensional structural and hydrodynamic parameters. In this work, we propose a trajectory-driven global optimization framework for unified structural-hydrodynamic modeling of underwater multibody systems. Inspired by the Covariance Matrix Adaptation Evolution Strategy (CMA-ES), the proposed approach simultaneously identifies coupled elastic, damping, and distributed hydrodynamic parameters through trajectory-level matching between simulated and experimental motion. This enables high-fidelity reproduction of underactuated mechanisms and compliant soft robotic systems in underwater environments, using as little as a single video recording. We first validate the framework on a link-by-link underactuated multibody mechanism, demonstrating accurate identification of distributed hydrodynamic coefficients, with normalized end-effector position error below 5% across multiple trajectories, initial conditions, and both active-passive and fully passive configurations. The modeling strategy is further validated on an asymmetric octopus-inspired soft arm, confirming its effectiveness for compliant soft robotic systems. Finally, eight identified arms are assembled into a swimming octopus robot, where the unified parameter set enables realistic whole-body behavior without additional retuning. These results demonstrate the scalability and transferability of the proposed structural-hydrodynamic modeling framework across underwater underactuated and soft robotic systems.

cs.RO↗

arXiv2026

Rod models in continuum and soft robot control: a review

Continuum and soft robots can transform automation tasks requiring compliant interaction in constrained or unstructured environments, including healthcare, agriculture, marine, and space applications. However, their complex mechanics introduce significant challenges in modeling and control. Low-dimensional continuum mechanical models, such as rod theories, effectively capture the large deformations of slender bodies in contact-rich scenarios while balancing accuracy and computational efficiency. This paper presents a vertical survey of rod models for continuum and soft robots, spanning their mathematical foundations, robot modeling, and control applications. We review the main rod theories adopted in soft robotics and introduce a deformation-based classification of rod models for continuum and soft robots. Furthermore, we survey recent model-based and learning-based control strategies leveraging rod models, highlighting their role in manipulation and physical interaction tasks. Finally, we discuss advantages, limitations, research gaps, and emerging directions of rod-based approaches. This paper aims to serve as a reference for developing models and control strategies for continuum and soft robots.

cs.RO↗

arXiv2026

Source-Free Bistable Fluidic Gripper for Size-Selective and Stiffness-Adaptive Grasping

Conventional fluid-driven soft grippers typically depend on external sources, which limit portability and long-term autonomy. This work introduces a self-contained soft gripper with fixed size that operates solely through internal liquid redistribution among three interconnected bistable snap-through chambers. When the top sensing chamber deforms upon contact, the displaced liquid triggers snap-through expansion of the grasping chambers, enabling stable and size-selective grasping without continuous energy input. The internal hydraulic feedback further allows passive adaptation of gripping pressure to object stiffness. This source-free and compact design opens new possibilities for lightweight, stiffness-adaptive fluid-driven manipulation in soft robotics, providing a feasible approach for targeted size-specific sampling and operation in underwater and field environments.

cs.RO↗

arXiv2026

Shape Control of a Planar Hyper-Redundant Robot via Hybrid Kinematics-Informed and Learning-based Approach

Hyper-redundant robots offer high dexterity, making them good at operating in confined and unstructured environments. To extend the reachable workspace, we built a multi-segment flexible rack actuated planar robot. However, the compliance of the flexible mechanism introduces instability, rendering it sensitive to external and internal uncertainties. To address these limitations, we propose a hybrid kinematics-informed and learning-based shape control method, named SpatioCoupledNet. The neural network adopts a hierarchical design that explicitly captures bidirectional spatial coupling between segments while modeling local disturbance along the robot body. A confidence-gating mechanism integrates prior kinematic knowledge, allowing the controller to adaptively balance model-based and learned components for improved convergence and fidelity. The framework is validated on a five-segment planar hyper-redundant robot under three representative shape configurations. Experimental results demonstrate that the proposed method consistently outperforms both analytical and purely neural controllers. In complex scenarios, it reduces steady-state error by up to 75.5% against the analytical model, and accelerates convergence by up to 20.5% compared to the data-driven baseline. Furthermore, gating analysis reveals a state-dependent authority fusion, shifting toward data-driven predictions in unstable states, while relying on physical priors in the remaining cases. Finally, we demonstrate robust performance in a dynamic task where the robot maintains a fixed end-effector position while avoiding moving obstacles, achieving a precise tip-positioning accuracy with a mean error of 10.47 mm.

cs.RO↗

arXiv2026

Physical Human-Robot Interaction for Grasping in Augmented Reality via Rigid-Soft Robot Synergy

Hybrid rigid-soft robots combine the precision of rigid manipulators with the compliance and adaptability of soft arms, offering a promising approach for versatile grasping in unstructured environments. However, coordinating hybrid robots remains challenging, due to difficulties in modeling, perception, and cross-domain kinematics. In this work, we present a novel augmented reality (AR)-based physical human-robot interaction framework that enables direct teleoperation of a hybrid rigid-soft robot for simple reaching and grasping tasks. Using an AR headset, users can interact with a simulated model of the robotic system integrated into a general-purpose physics engine, which is superimposed on the real system, allowing simulated execution prior to real-world deployment. To ensure consistent behavior between the virtual and physical robots, we introduce a real-to-simulation parameter identification pipeline that leverages the inherent geometric properties of the soft robot, enabling accurate modeling of its static and dynamic behavior as well as the control system's response.

cs.RO↗

arXiv2026

Octopus-like Reaching Motion: A Perspective Inspired by Whipping

The stereotypical reaching motion of the octopus arm has drawn growing attention for its efficient control of a highly deformable body. Previous studies suggest that its characteristic bend propagation may share underlying principles with the dynamics of a whip. This work investigates whether whip-like passive dynamics in water can reproduce the kinematic features observed in biological reaching and their similarities and differences. Platform-based whipping tests were performed in water and air while systematically varying material stiffness and driving speed. Image-based quantification revealed that the Ecoflex Gel 2 arm driven at 150 rpm (motor speed) reproduced curvature propagation similar to that observed in octopus reaching. However, its bend-point velocity decreased monotonically rather than exhibiting the biological bell-shaped profile, confirming that the octopus reaching movement is not merely a passive whipping behavior. The absence of propagation in air further highlights the critical role of the surrounding medium in forming octopus-like reaching motion. This study provides a new perspective for understand biological reaching movement, and offers a potential platform for future hydrodynamic research.

cs.RO↗

arXiv2026

From Shallow Waters to Mariana Trench: A Survey of Bio-inspired Underwater Soft Robots

Sample Exploring the ocean environment holds profound significance in areas such as resource exploration and ecological protection. Underwater robots struggle with extreme water pressure and often cause noise and damage to the underwater ecosystem, while bio-inspired soft robots draw inspiration from aquatic creatures to address these challenges. These bio-inspired approaches enable robots to withstand high water pressure, minimize drag, operate with efficient manipulation and sensing systems, and interact with the environment in an eco-friendly manner. Consequently, bio-inspired soft robots have emerged as a promising field for ocean exploration. This paper reviews recent advancements in underwater bio-inspired soft robots, analyses their design considerations when facing different desired functions, bio-inspirations, ambient pressure, temperature, light, and biodiversity , and finally explores the progression from bio-inspired principles to practical applications in the field and suggests potential directions for developing the next generation of underwater soft robots.

cs.RO↗

arXiv2026

Soft Responsive Materials Enhance Humanoid Safety

Humanoid robots are envisioned as general-purpose platforms in human-centered environments, yet their deployment is limited by vulnerability to falls and the risks posed by rigid metal-plastic structures to people and surroundings. We introduce a soft-rigid co-design framework that leverages non-Newtonian fluid-based soft responsive materials to enhance humanoid safety. The material remains compliant during normal interaction but rapidly stiffens under impact, absorbing and dissipating fall-induced forces. Physics-based simulations guide protector placement and thickness and enable learning of active fall policies. Applied to a 42 kg life-size humanoid, the protector markedly reduces peak impact and allows repeated falls without hardware damage, including drops from 3 m and tumbles down long staircases. Across diverse scenarios, the approach improves robot robustness and environmental safety. By uniting responsive materials, structural co-design, and learning-based control, this work advances interact-safe, industry-ready humanoid robots.

cs.RO↗