arXiv subjects

Chaitali Joshi

Publications and source records attributed to Chaitali Joshi.

14 recordsLinked to original sources

arXiv2026

Many-body quantum optics in a cascaded chiral network

Chiral quantum emitters interact with light only in one propagation direction, allowing them to be linked into cascaded systems in which photons mediate ordered, long-range interactions. Such systems are predicted to host novel regimes of many-body physics of light and matter. Exploring these regimes requires arrays of identical quantum emitters with directional, low-loss coupling to guided photons, a combination that has thus far remained experimentally out of reach. Here we realize a cascaded network of superconducting qubits using an architecture that overcomes these bottlenecks. We implement a four-qubit chain spanning two modules, with separations ranging from millimeters to half a meter, and exploit the shared waveguide as a dissipative resource to stabilize reconfigurable entanglement, reaching a genuinely multipartite regime unavailable in reciprocal baths. By scattering weak pulses off the chain, we observe photons sorted in time by photon number, a signature of the strong photon-photon interactions mediated by the emitters. Together, these results provide experimental access to many-body light-matter regimes that are beyond the reach of reciprocal systems.

quant-ph↗

arXiv2025

Visualizing Dynamics of Charges and Strings in (2+1)D Lattice Gauge Theories

Lattice gauge theories (LGTs) can be employed to understand a wide range of phenomena, from elementary particle scattering in high-energy physics to effective descriptions of many-body interactions in materials. Studying dynamical properties of emergent phases can be challenging as it requires solving many-body problems that are generally beyond perturbative limits. Here, we investigate the dynamics of local excitations in a $\mathbb{Z}_2$ LGT using a two-dimensional lattice of superconducting qubits. We first construct a simple variational circuit which prepares low-energy states that have a large overlap with the ground state; then we create charge excitations with local gates and simulate their quantum dynamics via a discretized time evolution. As the electric field coupling constant is increased, our measurements show signatures of transitioning from deconfined to confined dynamics. For confined excitations, the electric field induces a tension in the string connecting them. Our method allows us to experimentally image string dynamics in a (2+1)D LGT from which we uncover two distinct regimes inside the confining phase: for weak confinement the string fluctuates strongly in the transverse direction, while for strong confinement transverse fluctuations are effectively frozen. In addition, we demonstrate a resonance condition at which dynamical string breaking is facilitated. Our LGT implementation on a quantum processor presents a novel set of techniques for investigating emergent excitations and string dynamics.

quant-ph↗

arXiv2025

Demonstrating dynamic surface codes

A remarkable characteristic of quantum computing is the potential for reliable computation despite faulty qubits. This can be achieved through quantum error correction, which is typically implemented by repeatedly applying static syndrome checks, permitting correction of logical information. Recently, the development of time-dynamic approaches to error correction has uncovered new codes and new code implementations. In this work, we experimentally demonstrate three time-dynamic implementations of the surface code, each offering a unique solution to hardware design challenges and introducing flexibility in surface code realization. First, we embed the surface code on a hexagonal lattice, reducing the necessary couplings per qubit from four to three. Second, we walk a surface code, swapping the role of data and measure qubits each round, achieving error correction with built-in removal of accumulated non-computational errors. Finally, we realize the surface code using iSWAP gates instead of the traditional CNOT, extending the set of viable gates for error correction without additional overhead. We measure the error suppression factor when scaling from distance-3 to distance-5 codes of $Λ_{35,\text{hex}} = 2.15(2)$, $Λ_{35,\text{walk}} = 1.69(6)$, and $Λ_{35,\text{iSWAP}} = 1.56(2)$, achieving state-of-the-art error suppression for each. With detailed error budgeting, we explore their performance trade-offs and implications for hardware design. This work demonstrates that dynamic circuit approaches satisfy the demands for fault-tolerance and opens new alternative avenues for scalable hardware design.

quant-ph↗

arXiv2025

Telecom-to-Visible Quantum Frequency Converter on a Silicon Nitride Chip

Quantum frequency conversion serves a key role in the realization of hybrid quantum networks by interfacing between wavelength-incompatible platforms. Here we present the first quantum frequency converter connecting visible and telecom domains on a silicon nitride (SiN) chip, using Bragg-scattering four-wave mixing to upconvert heralded single photons from 1260 to 698 nm, which covers a 192 THz span. We examine the noise sources in SiN and devise approaches to suppress noise photons at the source and target frequencies to enable measurements at the single-photon level. We demonstrate an on-chip conversion efficiency of 5% in photon flux and describe design modifications that can be implemented to significantly improve it. Our results pave the way for the implementation of CMOS-compatible devices in quantum networks.

quant-ph↗

arXiv2024

Scaling and logic in the color code on a superconducting quantum processor

Quantum error correction is essential for bridging the gap between the error rates of physical devices and the extremely low logical error rates required for quantum algorithms. Recent error-correction demonstrations on superconducting processors have focused primarily on the surface code, which offers a high error threshold but poses limitations for logical operations. In contrast, the color code enables much more efficient logic, although it requires more complex stabilizer measurements and decoding techniques. Measuring these stabilizers in planar architectures such as superconducting qubits is challenging, and so far, realizations of color codes have not addressed performance scaling with code size on any platform. Here, we present a comprehensive demonstration of the color code on a superconducting processor, achieving logical error suppression and performing logical operations. Scaling the code distance from three to five suppresses logical errors by a factor of $Λ_{3/5}$ = 1.56(4). Simulations indicate this performance is below the threshold of the color code, and furthermore that the color code may be more efficient than the surface code with modest device improvements. Using logical randomized benchmarking, we find that transversal Clifford gates add an error of only 0.0027(3), which is substantially less than the error of an idling error correction cycle. We inject magic states, a key resource for universal computation, achieving fidelities exceeding 99% with post-selection (retaining about 75% of the data). Finally, we successfully teleport logical states between distance-three color codes using lattice surgery, with teleported state fidelities between 86.5(1)% and 90.7(1)%. This work establishes the color code as a compelling research direction to realize fault-tolerant quantum computation on superconducting processors in the near future.

quant-ph↗

arXiv2024

N-Way Frequency Beamsplitter for Quantum Photonics

Optical networks are the leading platform for the transfer of information due to their low loss and ability to scale to many information channels using optical frequency modes. To fully leverage the quantum properties of light in this platform, it is desired to manipulate higher-dimensional superpositions by orchestrating linear, beamsplitter-type interactions between several channels simultaneously. We propose a method of achieving simultaneous, all-to-all coupling between N optical frequency modes via N-way Bragg-scattering four-wave mixing. By exploiting the frequency degree of freedom, additional modes can be multiplexed in an interaction medium of fixed volume and loss, avoiding the introduction of excess noise. We generalize the theory of the frequency-encoded two-mode interaction to N modes under this four-wave mixing approach and experimentally verify the quantum nature of this scheme by demonstrating three-way multiphoton interference. The two input photons are shared among three frequency modes and display interference differing from that of two classical (coherent-state) inputs. These results show the potential of our approach for the scalability of photonic quantum information processing to general N-mode systems in the frequency domain.

quant-ph↗

arXiv2024

Stabilizing remote entanglement via waveguide dissipation

Distributing entanglement between remote sites is integral to quantum networks. Here, we demonstrate the autonomous stabilization of remote entanglement between a pair of non-interacting superconducting qubits connected by an open waveguide on a chip. In this setting, the interplay between a classical continuous drive - supplied through the waveguide - and dissipation into the waveguide stabilizes the qubit pair in a dark state, which, asymptotically, takes the form of a Bell state. We use field-quadrature measurements of the photons emitted to the waveguide to perform quantum state tomography on the stabilized states, where we find a concurrence of $0.504^{+0.007}_{-0.029}$ in the optimal setting with a stabilization time constant of 56 $\pm$ 4 ns. We examine the imperfections within our system and discuss avenues for enhancing fidelities and achieving scalability in future work. The decoherence-protected, steady-state remote entanglement offered via dissipative stabilization may find applications in distributed quantum computing, sensing, and communication.

quant-ph↗

arXiv2022

Resonance fluorescence of a chiral artificial atom

We demonstrate a superconducting artificial atom with strong unidirectional coupling to a microwave photonic waveguide. Our artificial atom is realized by coupling a transmon qubit to the waveguide at two spatially separated points with time-modulated interactions. Direction-sensitive interference arising from the parametric couplings in our scheme results in a non-reciprocal response, where we measure a forward/backward ratio of spontaneous emission exceeding 100. We verify the quantum nonlinear behavior of this artificial chiral atom by measuring the resonance fluorescence spectrum under a strong resonant drive and observing well-resolved Mollow triplets. Further, we demonstrate chirality for the second transition energy of the artificial atom and control it with a pulse sequence to realize a qubit-state-dependent non-reciprocal phase on itinerant photons. Our demonstration puts forth a superconducting hardware platform for the scalable realization of several key functionalities pursued within the paradigm of chiral quantum optics, including quantum networks with all-to-all connectivity, driven-dissipative stabilization of many-body entanglement, and the generation of complex non-classical states of light.

quant-ph↗

arXiv2022

Strong kinetic-inductance Kerr nonlinearity with titanium nitride nanowires

Thin films of disordered superconductors such as titanium nitride (TiN) exhibit large kinetic inductance (KI), high critical temperature, and large quality factors at the single-photon level. KI nonlinearity can be exploited as an alternative to Josephson junctions for creating novel nonlinear quantum devices with the potential to operate at higher frequencies and at elevated temperatures. We study a means of magnifying KI nonlinearity by confining the current density of resonant electromagnetic modes in nanowires with a small volume $V \simeq 10^{-4}\text{um}^3$. Using this concept, we realize microwave-frequency Kerr cavities with a maximum Kerr-shift per photon of $K/2π= 123.5 \pm 3$ kHz and report a nonlinearity-to-linewidth ratio $K/γ= 21\%$. With improved design, our devices are expected to approach the regime of strong quantum nonlinearity in the millimeter-wave spectrum.

quant-ph↗

arXiv2022

A quantum electromechanical interface for long-lived phonons

Controlling long-lived mechanical oscillators in the quantum regime holds promises for quantum information processing. Here, we present an electromechanical system capable of operating in the GHz-frequency band in a silicon-on-insulator platform. Relying on a novel driving scheme based on an electrostatic field and high-impedance microwave cavities based on TiN superinductors, we are able to demonstrate a parametrically-enhanced electromechanical coupling of ${g/2 π} = 1.1$ MHz, sufficient to enter the strong-coupling regime with a cooperativity of $\mathcal{C} = 1200$. The absence of piezoelectric materials in our platform leads to long mechanical lifetimes, finding intrinsic values up to $τ_\text{d} = 265~ μ$s ($Q = 8.4 \times {10}^6$ at $ω_\mathrm{m}/2π= 5$ GHz) measured at low-phonon numbers and millikelvin temperatures. Despite the strong parametric drives, we find the cavity-mechanics system in the quantum ground state by performing sideband thermometry measurements. Simultaneously achieving ground-state operation, long mechanical lifetimes, and strong coupling sets the stage for employing silicon electromechanical resonators as memory elements and transducers in hybrid quantum systems, and as a tool for probing the origins of acoustic loss in the quantum regime.

quant-ph↗

arXiv2022

Deep sub-wavelength localization of light and sound in dielectric resonators

Optomechanical crystals provide coupling between phonons and photons by confining them to commensurate wavelength-scale dimensions. We present a new concept for designing optomechanical crystals capable of achieving unprecedented coupling rates by confining optical and mechanical waves to deep sub-wavelength dimensions. Our design is based on a dielectric bowtie unit cell with an effective optical/mechanical mode volume of $7.6 \times 10^{-3} {(λ/n_{\textrm{Si}})}^3$/$ 1.2 \times 10^{-3} {λ_{\textrm{mech}}}^3$. We present results from numerical modeling, indicating a single-photon optomechanical coupling of 2.2 MHz with experimentally viable parameters. Monte Carlo simulations are used to demonstrate the design's robustness against fabrication disorder.

physics.optics↗

arXiv2020

Frequency-Domain Quantum Interference with Correlated Photons from an Integrated Microresonator

Frequency encoding of quantum information together with fiber and integrated photonic technologies can significantly reduce the complexity and resource requirements for realizing all-photonic quantum networks. The key challenge for such frequency domain processing of single photons is to realize coherent and selective interactions between quantum optical fields of different frequencies over a range of bandwidths. Here, we report frequency-domain Hong-Ou-Mandel interference with spectrally distinct photons generated from a chip-based microresonator. We use four-wave mixing to implement an active frequency beam-splitter and achieve interference visibilities of $0.95 \pm 0.02$. Our work establishes four-wave mixing as a tool for selective high-fidelity two-photon operations in the frequency domain which, combined with integrated single-photon sources, provides a building block for frequency-multiplexed photonic quantum networks.

quant-ph↗

arXiv2020

Visible nonlinear photonics via high-order-mode dispersion engineering

Over the past decade, remarkable advances have been realized in chip-based nonlinear photonic devices for classical and quantum applications in the near- and mid-infrared regimes. However, few demonstrations have been realized in the visible and near-visible regimes, primarily due to the large normal material group-velocity dispersion (GVD) that makes it challenging to phase match third-order parametric processes. In this paper, we show that exploiting dispersion engineering of higher-order waveguide modes provides waveguide dispersion that allows for small or anomalous GVD in the visible and near-visible regimes and phase matching of four-wave mixing processes. We illustrate the power of this concept by demonstrating in silicon nitride microresonators a near-visible modelocked Kerr frequency comb and a narrow-band photon-pair source compatible with Rb transitions. These realizations extend applications of nonlinear photonics towards the visible and near-visible regimes for applications in time and frequency metrology, spectral calibration, quantum information, and biomedical applications.

physics.optics↗

arXiv2017

Frequency Multiplexing for Quasi-Deterministic Heralded Single-Photon Sources

Single-photon sources based on optical parametric processes have been used extensively for quantum information applications due to their flexibility, room-temperature operation and potential for photonic integration. However, the intrinsically probabilistic nature of these sources is a major limitation for realizing large-scale quantum networks. Active feedforward switching of photons from multiple probabilistic sources is a promising approach that can be used to build a deterministic source. However, previous implementations of this approach that utilize spatial and/or temporal multiplexing suffer from rapidly increasing switching losses when scaled to a large number of modes. Here, we break this limitation via frequency multiplexing in which the switching losses remain fixed irrespective of the number of modes. We use the third-order nonlinear process of Bragg scattering four-wave mixing as an efficient ultra-low noise frequency switch and demonstrate multiplexing of three frequency modes. We achieve a record generation rate of $4.6\times10^4$ multiplexed photons per second with an ultra-low $g^{2}(0)$ = 0.07, indicating high single-photon purity. Our scalable, all-fiber multiplexing system has a total loss of just 1.3 dB independent of the number of multiplexed modes, such that the 4.8 dB enhancement from multiplexing three frequency modes markedly overcomes switching loss. Our approach offers a highly promising path to creating a deterministic photon source that can be integrated on a chip-based platform.

quant-ph↗