arXiv subjects

Chan-Byoung Chae

Publications and source records attributed to Chan-Byoung Chae.

At least 181 records · Page 10Linked to original sources

arXiv2016

RF Lens-Embedded Massive MIMO Systems: Fabrication Issues and Codebook Design

In this paper, we investigate a radio frequency (RF) lens-embedded massive multiple-input multiple-output (MIMO) system and evaluate the system performance of limited feedback by utilizing a technique for generating a suitable codebook for the system. We fabricate an RF lens that operates on a 77 GHz (mmWave) band. Experimental results show a proper value of amplitude gain and an appropriate focusing property. In addition, using a simple numerical technique--beam propagation method (BPM)--we estimate the power profile of the RF lens and verify its accordance with experimental results. We also design a codebook--multi-variance codebook quantization (MVCQ)--for limited feedback by considering the characteristics of the RF lens antenna for massive MIMO systems. Numerical results confirm that the proposed system shows significant performance enhancement over a conventional massive MIMO system without an RF lens.

cs.IT↗

arXiv2016

Smart Small Cell with Hybrid Beamforming for 5G: Theoretical Feasibility and Prototype Results

In this article, we present a real-time three dimensional (3D) hybrid beamforming for fifth generation (5G) wireless networks. One of the key concepts in 5G cellular systems is the small cell network, which settles the high mobile traffic demand and provides uniform user-experienced data rates. The overall capacity of the small cell network can be enhanced with the enabling technology of 3D hybrid beamforming. This study validates the feasibility of the 3D hybrid beamforming, mostly for link-level performances, through the implementation of a realtime testbed using a software-defined radio (SDR) platform and fabricated antenna array. Based on the measured data, we also investigate system-level performances to verify the gain of the proposed smart small cell system over long term evolution (LTE) systems by performing system-level simulations based on a 3D ray-tracing tool.

cs.NI↗

arXiv2016

Molecular MIMO: From Theory to Prototype

In diffusion-based molecular communication, information transport is governed by diffusion through a fluid medium. The achievable data rates for these channels are very low compared to the radio-based communication system, since diffusion can be a slow process. To improve the data rate, a novel multiple-input multiple-output (MIMO) design for molecular communication is proposed that utilizes multiple molecular emitters at the transmitter and multiple molecular detectors at the receiver (in RF communication these all correspond to antennas). Using particle-based simulators, the channel's impulse response is obtained and mathematically modeled. These models are then used to determine inter-link interference (ILI) and inter-symbol interference (ISI). It is assumed that when the receiver has incomplete information regarding the system and the channel state, low complexity symbol detection methods are preferred since the receiver is small and simple. Thus four detection algorithms are proposed---adaptive thresholding, practical zero forcing with channel models excluding/including the ILI and ISI, and Genie-aided zero forcing. The proposed algorithms are evaluated extensively using numerical and analytical evaluations.

cs.ET↗

arXiv2016

A Comprehensive Survey of Recent Advancements in Molecular Communication

With much advancement in the field of nanotechnology, bioengineering and synthetic biology over the past decade, microscales and nanoscales devices are becoming a reality. Yet the problem of engineering a reliable communication system between tiny devices is still an open problem. At the same time, despite the prevalence of radio communication, there are still areas where traditional electromagnetic waves find it difficult or expensive to reach. Points of interest in industry, cities, and medical applications often lie in embedded and entrenched areas, accessible only by ventricles at scales too small for conventional radio waves and microwaves, or they are located in such a way that directional high frequency systems are ineffective. Inspired by nature, one solution to these problems is molecular communication (MC), where chemical signals are used to transfer information. Although biologists have studied MC for decades, it has only been researched for roughly 10 year from a communication engineering lens. Significant number of papers have been published to date, but owing to the need for interdisciplinary work, much of the results are preliminary. In this paper, the recent advancements in the field of MC engineering are highlighted. First, the biological, chemical, and physical processes used by an MC system are discussed. This includes different components of the MC transmitter and receiver, as well as the propagation and transport mechanisms. Then, a comprehensive survey of some of the recent works on MC through a communication engineering lens is provided. The paper ends with a technology readiness analysis of MC and future research directions.

cs.ET↗

arXiv2015

Stable Distributions as Noise Models for Molecular Communication

In this work, we consider diffusion-based molecular communication timing channels. Three different timing channels are presented based on three different modulation techniques, i.e., i) modulation of the release timing of the information particles, ii) modulation on the time between two consecutive information particles of the same type, and iii) modulation on the time between two consecutive information particles of different types. We show that each channel can be represented as an additive noise channel, where the noise follows one of the subclasses of stable distributions. We provide expressions for the probability density function of the noise terms, and numerical evaluations for the probability density function and cumulative density function. We also show that the tails are longer than Gaussian distribution, as expected.

cs.IT↗

arXiv2015

Energy Model for Vesicle-Based Active Transport Molecular Communication

In active transport molecular communication (ATMC), information particles are actively transported from a transmitter to a receiver using special proteins. Prior work has demonstrated that ATMC can be an attractive and viable solution for on-chip applications. The energy consumption of an ATMC system plays a central role in its design and engineering. In this work, an energy model is presented for ATMC and the model is used to provide guidelines for designing energy efficient systems. The channel capacity per unit energy is analyzed and maximized. It is shown that based on the size of the symbol set and the symbol duration, there is a vesicle size that maximizes rate per unit energy. It is also demonstrated that maximizing rate per unit energy yields very different system parameters compared to maximizing the rate only.

cs.ET↗

arXiv2015

Molecular Communications: Channel Model and Physical Layer Techniques

This article examines recent research in molecular communications from a telecommunications system design perspective. In particular, it focuses on channel models and state-of-the-art physical layer techniques. The goal is to provide a foundation for higher layer research and motivation for research and development of functional prototypes. In the first part of the article, we focus on the channel and noise model, comparing molecular and radio-wave pathloss formulae. In the second part, the article examines, equipped with the appropriate channel knowledge, the design of appropriate modulation and error correction coding schemes. The third reviews transmitter and receiver side signal processing methods that suppress inter-symbol-interference. Taken together, the three parts present a series of physical layer techniques that are necessary to producing reliable and practical molecular communications.

cs.ET↗

arXiv2015

Performance Analysis of Massive MIMO for Cell-Boundary Users

In this paper, we consider massive multiple-input multiple-output (MIMO) systems for both downlink and uplink scenarios, where three radio units (RUs) connected via one digital unit (DU) support multiple user equipments (UEs) at the cell-boundary through the same radio resource, i.e., the same time-frequency slot. For downlink transmitter options, the study considers zero-forcing (ZF) and maximum ratio transmission (MRT), while for uplink receiver options it considers ZF and maximum ratio combining (MRC). For the sum rate of each of these, we derive simple closed-form formulas. In the simple but practically relevant case where uniform power is allocated to all downlink data streams, we observe that, for the downlink, vector normalization is better for ZF while matrix normalization is better for MRT. For a given antenna and user configuration, we also derive analytically the signal-to-noise-ratio (SNR) level below which MRC should be used instead of ZF. Numerical simulations confirm our analytical results.

cs.IT↗

arXiv2015

Large-scale Antenna Operation in Heterogeneous Cloud Radio Access Networks: A Partial Centralization Approach

To satisfy the ever-increasing capacity demand and quality of service (QoS) requirements of users, 5G cellular systems will take the form of heterogeneous networks (HetNets) that consist of macro cells and small cells. To build and operate such systems, mobile operators have given significant attention to cloud radio access networks (C-RANs) due to their beneficial features of performance optimization and cost effectiveness. Along with the architectural enhancement of C-RAN, large-scale antennas (a.k.a. massive MIMO) at cell sites contribute greatly to increased network capacity either with higher spectral efficiency or through permitting many users at once. In this article, we discuss the challenging issues of C-RAN based HetNets (H-CRAN), especially with respect to large-scale antenna operation. We provide an overview of existing C-RAN architectures in terms of large-scale antenna operation and promote a partially centralized approach. This approach reduces, remarkably, fronthaul overheads in CRANs with large-scale antennas. We also provide some insights into its potential and applicability in the fronthaul bandwidthlimited H-CRAN with large-scale antennas.

cs.NI↗

arXiv2015

Compressed Channel Feedback for Correlated Massive MIMO Systems

Massive multiple-input multiple-output (MIMO) is a promising approach for cellular communication due to its energy efficiency and high achievable data rate. These advantages, however, can be realized only when channel state information (CSI) is available at the transmitter. Since there are many antennas, CSI is too large to feed back without compression. To compress CSI, prior work has applied compressive sensing (CS) techniques and the fact that CSI can be sparsified. The adopted sparsifying bases fail, however, to reflect the spatial correlation and channel conditions or to be feasible in practice. In this paper, we propose a new sparsifying basis that reflects the long-term characteristics of the channel, and needs no change as long as the spatial correlation model does not change. We propose a new reconstruction algorithm for CS, and also suggest dimensionality reduction as a compression method. To feed back compressed CSI in practice, we propose a new codebook for the compressed channel quantization assuming no other-cell interference. Numerical results confirm that the proposed channel feedback mechanisms show better performance in point-to-point (single-user) and point-to-multi-point (multi-user) scenarios.

cs.IT↗

arXiv2015

Molecular MIMO Communication Link

In this demonstration, we will present the world's first molecular multiple-input multiple-output (MIMO) communication link to deliver two data streams in a spatial domain. We show that chemical signals such as concentration gradients could be used in MIMO fashion to transfer sequential data. Until now it was unclear whether MIMO techniques, which are used extensively in modern radio communication, could be applied to molecular communication. In the demonstration, using our devised MIMO apparatus and carefully designed detection algorithm, we will show that we can achieve about 1.7 times higher data rate than single input single output (SISO) molecular communication systems.

cs.ET↗

arXiv2015

Detection Algorithms for Molecular MIMO

In this paper, we propose a novel design for molecular communication in which both the transmitter and the receiver have, in a 3-dimensional environment, multiple bulges (in RF communication this corresponds to antenna). The proposed system consists of a fluid medium, information molecules, a transmitter, and a receiver. We simulate the system with a one-shot signal to obtain the channel's finite impulse response. We then incorporate this result within our mathematical analysis to determine interference. Molecular communication has a great need for low complexity, hence, the receiver may have incomplete information regarding the system and the channel state. Thus, for the cases of limited information set at the receiver, we propose three detection algorithms, namely adaptive thresholding, practical zero forcing, and Genie-aided zero forcing.

cs.ET↗

arXiv2015

A Universal Channel Model for Molecular Communication Systems with Metal-Oxide Detectors

In this paper, we propose an end-to-end channel model for molecular communication systems with metal-oxide sensors. In particular, we focus on the recently developed table top molecular communication platform. The system is separated into two parts: the propagation and the sensor detection. There is derived, based on this, a more realistic end-to-end channel model. However, since some of the coefficients in the derived models are unknown, we collect a great deal of experimental data to estimate these coefficients and evaluate how they change with respect to the different system parameters. Finally, a noise model is derived for the system to complete an end-to-end system model for the tabletop platform.

cs.ET↗

arXiv2014

Effect of Receptor Density and Size on Signal Reception in Molecular Communication via Diffusion with an Absorbing Receiver

The performance of molecular communication is significantly impacted by the reception process of the messenger molecules. The receptors' size and density, however, have yet to be investigated. In this letter, we analyze the effect of receptor density and size on the signal reception of an absorbing receiver with receptors. The results show that, when the total receptor area is the same, better hitting probability is achieved by using a higher number of relatively small receptors. In addition, deploying receptors, which cover a small percentage of the receiver surface, is able to create an effective communication channel that has a detectable signal level.

cs.ET↗

arXiv2014

ISI Mitigation Techniques in Molecular Communication

Molecular communication is a new field of communication where molecules are used to transfer information. Among the proposed methods, molecular communication via diffusion (MCvD) is particularly effective. One of the main challenges in MCvD is the intersymbol interference (ISI), which inhibits communication at high data rates. Furthermore, at the nano scale, energy efficiency becomes an essential problem. Before addressing these problems, a pre-determined threshold for the received signal must be calculated to make a decision. In this paper, an analytical technique is proposed to determine the optimum threshold, whereas in the literature, these thresholds are generally calculated empirically. Since the main goal of this paper is to build an MCvD system suitable for operating at high data rates without sacrificing quality, new modulation and filtering techniques are proposed to decrease the effects of ISI and enhance energy efficiency. As a transmitter-based solution, a modulation technique for MCvD, molecular transition shift keying (MTSK), is proposed in order to increase the data rate via suppressing the ISI. Furthermore, for energy efficiency, a power adjustment technique that utilizes the residual molecules is proposed. Finally, as a receiver-based solution, a new energy efficient decision feedback filter (DFF) is proposed as a substitute for the decoders such as minimum mean squared error (MMSE) and decision feedback equalizer (DFE). The error performance of DFF and MMSE equalizers are compared in terms of bit error rates, and it is concluded that DFF may be more advantageous when energy efficiency is concerned, due to its lower computational complexity.

cs.ET↗

arXiv2014

Effect of Degradation in Molecular Communication: Impairment or Enhancement?

In the nanonetworking literature, many solutions have been suggested to enable the nanomachine-to-nanomachine communication. Among these solutions, we focus on what constitutes the basis for molecular communication paradigms --molecular communication via diffusion (MCvD). In this paper, we start with an analytical modeling of a spherical absorbing receiver under messenger molecule degradation and show that our formulations are in agreement with the simulation results of a similar topology. Next, we identify how such signal characteristics as pulse peak time and pulse amplitude are affected by degradation. Indeed, we show analytically how in MCvD, signal shaping is achieved through degradation. We also compare communication under messenger molecule degradation with the case of no-degradation and electromagnetic communication in terms of channel characteristics. Lastly, we evaluate the communication performance of the scenarios having various degradation rates. Here, we assess the system performance according to traditional network metrics such as the level of inter-symbol interference, detection performance, bit error rate, and channel capacity. Our results indicate that introducing degradation significantly improves the system performance when the rate of degradation is appropriately selected. We make a thorough analysis of the communication scenario by taking into account different detection thresholds, symbol durations, and communication distances.

cs.ET↗

arXiv2014

Arrival Modeling and Error Analysis for Molecular Communication via Diffusion with Drift

The arrival of molecules in molecular communication via diffusion (MCvD) is a counting process, exhibiting by its nature binomial distribution. Even if the binomial process describes well the arrival of molecules, when considering consecutively sent symbols, the process struggles to work with the binomial cumulative distribution function (CDF). Therefore, in the literature, Poisson and Gaussian approximations of the binomial distribution are used. In this paper, we analyze these two approximations of the binomial model of the arrival process in MCvD with drift. Considering the distance, drift velocity, and the number of emitted molecules, we investigate the regions in which either Poisson or Gaussian model is better in terms of root mean squared error (RMSE) of the CDFs; we confirm the boundaries of the region via numerical simulations. Moreover, we derive the error probabilities for continuous communication and analyze which model approximates it more accurately.

cs.ET↗

arXiv2014

Symbol interval optimization for molecular communication with drift

In this paper, we propose a symbol interval optimization algorithm in molecular communication with drift. Proper symbol intervals are important in practical communication systems since information needs to be sent as fast as possible with low error rates. There is a trade-off, however, between symbol intervals and inter-symbol interference (ISI) from Brownian motion. Thus, we find proper symbol interval values considering the ISI inside two kinds of blood vessels, and also suggest no ISI system for strong drift models. Finally, an isomer-based molecule shift keying (IMoSK) is applied to calculate achievable data transmission rates (achievable rates, hereafter). Normalized achievable rates are also obtained and compared in one-symbol ISI and no ISI systems.

cs.IT↗