arXiv subjects

Chan-Byoung Chae

Publications and source records attributed to Chan-Byoung Chae.

At least 163 records · Page 9Linked to original sources

arXiv2017

Amplify-and-Forward Two-Way Relaying System over Free-Space Optics Channels

In this paper, we analyze the performance of a two- way subcarrier intensity-modulated (SIM) amplify-and-forward (AF) relaying system over free-space optics (FSO) communication channels. The analysis takes into consideration attenuations due to atmospheric turbulence, geometric spread and pointing errors at the same time. We derive, in generalized infinite power series expressions, the tight upper and lower bounds of the overall outage probability and average probability of errors of the system. The study finds that this two-way subcarrier intensity- modulated AF relaying system using a binary phase shift keying (BPSK) modulation could be used for practical applications in case of a weak turbulence regime in which the required SNR is about 30 dB to obtain the average bit error probability of 10-6. It is also noted that the pointing errors clearly degrade the performance of the two-way subcarrier intensity-modulated AF relaying system.

cs.IT↗

arXiv2017

Spatial Diversity in Molecular Communications

In this work, spatial diversity techniques in the area of multiple-input multiple-output (MIMO) diffusion-based molecular communications (DBMC) are investigated. For transmitter-side spatial coding, Alamouti-type coding and repetition MIMO coding are proposed and analyzed. At the receiver-side, selection diversity, equal-gain combining, and maximum-ratio combining are studied as combining strategies. Throughout the numerical analysis, a symmetrical $2\times 2$ MIMO-DBMC system is assumed. Furthermore, a trained artificial neural network is utilized to acquire the channel impulse responses. The numerical analysis demonstrates that it is possible to achieve a diversity gain in molecular communications. In addition, it is shown that for MIMO-DBMC systems repetition MIMO coding is superior to Alamouti-type coding.

cs.ET↗

arXiv2017

Spatial Coding Techniques for Molecular MIMO

This paper studies spatial diversity techniques applied to multiple-input multiple-output (MIMO) diffusion-based molecular communications (DBMC). Two types of spatial coding techniques, namely Alamouti-type coding and repetition MIMO coding are suggested and analyzed. In addition, we consider receiver-side equal-gain combining, which is equivalent to maximum-ratio combining in symmetrical scenarios. For numerical analysis, the channel impulse responses of a symmetrical $2 \times 2$ MIMO-DBMC system are acquired by a trained artificial neural network. It is demonstrated that spatial diversity has the potential to improve the system performance and that repetition MIMO coding outperforms Alamouti-type coding.

cs.ET↗

arXiv2017

Machine Learning based Channel Modeling for Molecular MIMO Communications

In diffusion-based molecular communication, information particles locomote via a diffusion process, characterized by random movement and heavy tail distribution for the random arrival time. As a result, the molecular communication shows lower transmission rates. To compensate for such low rates, researchers have recently proposed the molecular multiple-input multiple-output (MIMO) technique. Although channel models exist for single-input single-output (SISO) systems for some simple environments, extending the results to multiple molecular emitters complicates the modeling process. In this paper, we introduce a technique for modeling the molecular MIMO channel and confirm the effectiveness via numerical studies.

cs.ET↗

arXiv2017

Multiple Access for 5G New Radio: Categorization, Evaluation, and Challenges

Next generation wireless networks require massive uplink connections as well as high spectral efficiency. It is well known that, theoretically, it is not possible to achieve the sum capacity of multi-user communications with orthogonal multiple access. To meet the challenging requirements of next generation networks, researchers have explored non-orthogonal and overloaded transmission technologies-known as new radio multiple access (NR-MA) schemes-for fifth generation (5G) networks. In this article, we discuss the key features of the promising NR-MA schemes for the massive uplink connections. The candidate schemes of NR-MA can be characterized by multiple access signatures (MA-signatures), such as codebook, sequence, and interleaver/scrambler. At the receiver side, advanced multi-user detection (MUD) schemes are employed to extract each user's data from non-orthogonally superposed data according to MA-signatures. Through link-level simulations, we compare the performances of NR-MA candidates under the same conditions. We further evaluate the sum rate performances of the NR-MA schemes using a 3-dimensional (3D) ray tracing tool based system-level simulator by reflecting realistic environments. Lastly, we discuss the tips for system operations as well as call attention to the remaining technical challenges.

cs.IT↗

arXiv2017

Effective Enzyme Deployment for Degradation of Interference Molecules in Molecular Communication

In molecular communication, the heavy tail nature of molecular signals causes inter-symbol interference (ISI). Because of this, it is difficult to decrease symbol periods and achieve high data rate. As a probable solution for ISI mitigation, enzymes were proposed to be used since they are capable of degrading ISI molecules without deteriorating the molecular communication. While most prior work has assumed an infinite amount of enzymes deployed around the channel, from a resource perspective, it is more efficient to deploy a limited amount of enzymes at particular locations and structures. This paper considers carrying out such deployment at two structures--around the receiver (Rx) and/or the transmitter (Tx) site. For both of the deployment scenarios, channels with different system environment parameters, Tx-to-Rx distance, size of enzyme area, and symbol period, are compared with each other for analyzing an optimized system environment for ISI mitigation when a limited amount of enzymes are available.

cs.ET↗

arXiv2017

Compact Full Duplex MIMO Radios in D2D Underlaid Cellular Networks: From System Design to Prototype Results

This paper considers the implementation and application possibilities of a compact full duplex multiple-input multiple-output (MIMO) architecture where direct communication exists between users, e.g., device-to-device (D2D) and cellular link coexisting on the same spectrum. For the architecture of the compact full duplex radio, we combine an analog self-interference canceler based dual-polarization with high cross-polarization discrimination (XPD) and Long Term Evolution (LTE)-based per-subcarrier digital self-interference canceler. While we consider the compactness and power efficiency of an analog solution, we focus on the digital canceler design with robustness to a frequency-selective channel and high compatibility with a conventional LTE system. For an over-the-air wireless experiment of full duplex testbed with a two-user-pair, we implement a full duplex MIMO physical layer (PHY), supporting 20 MHz bandwidth, on an FPGA-based software-defined radio platform. Further, we propose a novel timing synchronization method to construct a more viable full duplex MIMO link. By having the full duplex link prototype fully operating in real-time, we present the first characterization of the proposed compact full duplex MIMO performance depending on the transmit power of the full duplex node. We also show the link quality between nodes. One of the crucial insights of this work is that the full duplex operation of a user is capable of acquiring the throughput gain if the user has self-interference capability with guaranteed performance.

cs.IT↗

arXiv2017

Nonlinear Self-Interference Cancellation for Full-Duplex Radios: From Link- and System-Level Performance Perspectives

One of the promising technologies for LTE Evolution is full-duplex radio, an innovation is expected to double the spectral efficiency. To realize full-duplex in practice, the main challenge is overcoming self-interference, and to do so, researchers have developed self-interference cancellation techniques. Since most wireless transceivers use power amplifiers, especially in cellular systems, researchers have revealed the importance of nonlinear self-interference cancellation. In this article, we first explore several nonlinear digital self-interference cancellation techniques. We then propose a low complexity pre-calibration-based nonlinear digital self-interference cancellation technique. Next we discuss issues about reference signal allocation and the overhead of each technique. For performance evaluations, we carry out extensive measurements through a real-time prototype and link-/system-level simulations. For link-level analysis, we measure the amount of cancelled self-interference for each technique. We also evaluate system-level performances through 3D ray-tracing-based simulations. Numerical results confirm the significant performance improvement over a half-duplex system even in interference-limited indoor environments.

cs.IT↗

arXiv2016

Prototyping Real-Time Full Duplex Radios

In this article, we present a real-time full duplex radio system for 5G wireless networks. Full duplex radios are capable of opening new possibilities in contexts of high traffic demand where there are limited radio resources. A critical issue, however, to implementing full duplex radios, in real wireless environments, is being able to cancel self-interference. To overcome the self-interference challenge, we prototype our design on a software-defined radio (SDR) platform. This design combines a dual-polarization antenna-based analog part with a digital self-interference canceller that operates in real-time. Prototype test results confirm that the proposed full-duplex system achieves about 1.9 times higher throughput than a half-duplex system. This article concludes with a discussion of implementationchallenges that remain for researchers seeking the most viable solution for full duplex communications.

cs.IT↗

arXiv2016

Cramer-Rao Lower Bound for DoA Estimation with RF Lens-Embedded Antenna Array

In this paper, we consider the Cramer-Rao lower bound (CRLB) for estimation of a lens-embedded antenna array with deterministic parameters. Unlike CRLB of uniform linear array (ULA), it is noted that CRLB for direction of arrival (DoA) of lens-embedded antenna array is dominated by not only angle but characteristics of lens. Derivation is based on the approximation that amplitude of received signal with lens is approximated to Gaussian function. We confirmed that parameters needed to design a lens can be derived by standard deviation of Gaussian, which represents characteristic of received signal, by simulation of beam propagation method. Well-designed lens antenna shows better performance than ULA in terms of estimating DoA. This is a useful derivation because, result can be the guideline for designing parameters of lens to satisfy certain purpose.

cs.IT↗

arXiv2016

A Machine Learning Approach to Model the Received Signal in Molecular Communications

A molecular communication channel is determined by the received signal. Received signal models form the basis for studies focused on modulation, receiver design, capacity, and coding depend on the received signal models. Therefore, it is crucial to model the number of received molecules until time $t$ analytically. Modeling the diffusion-based molecular communication channel with the first-hitting process is an open issue for a spherical transmitter. In this paper, we utilize the artificial neural networks technique to model the received signal for a spherical transmitter and a perfectly absorbing receiver (i.e., first hitting process). The proposed technique may be utilized in other studies that assume a spherical transmitter instead of a point transmitter.

cs.ET↗

arXiv2016

QoE-aware Scalable Video Transmission in MIMO~Systems

An important concept in wireless systems has been quality of experience (QoE)-aware video transmission. Such communications are considered not only connection-based communications but also content-aware communications, since the video quality is closely related to the content itself. It becomes necessary therefore for video communications to utilize a cross-layer design (also known as joint source and channel coding). To provide efficient methods of allocating network resources, the wireless network uses its cross-layer knowledge to perform unequal error protection (UEP) solutions. In this article, we summarize the latest video transmission technologies that are based on scalable video coding (SVC) over multiple-input multiple-output (MIMO) systems with cross-layer designs. To provide insight into video transmission in wireless networks, we investigate UEP solutions in the delivering of video over massive MIMO systems. Our results show that in terms of quality of experience (QoE), SVC layer prioritization, which was considered important in the prior work, is not always beneficial in massive MIMO systems; consideration must be given to the content characteristics.

cs.IT↗

arXiv2016

On the Impact of Time-Synchronization in Molecular Timing Channels

This work studies the impact of time- synchronization in molecular timing (MT) channels by analyzing three different modulation techniques. The first requires transmitter-receiver synchronization and is based on modulating information on the release timing of information particles. The other two are asynchronous and are based on modulating information on the relative time between two consecutive releases of information particles using indistinguishable or distinguishable particles. All modulation schemes result in a system that relate the transmitted and the received signals through an additive noise, which follows a stable distribution. As the common notion of the variance of a signal is not suitable for defining the power of stable distributed signals (due to infinite variance), we derive an expression for the geometric power of a large class of stable distributions, and then use this result to characterize the geometric signal-to-noise ratio (G-SNR) for each of the modulation techniques. In addition, for binary communication, we derive the optimal detection rules for each modulation technique. Numerical evaluations indicate that the bit error rate (BER) is constant for a given G-SNR, and the performance gain obtained by using synchronized communication is significant. Yet, it is also shown that by using two distinguishable particles per bit instead of one, the BER of the asynchronous technique can approach that of the synchronous one.

cs.IT↗

arXiv2016

Chemical Propagation Pattern for Molecular Communications

In a diffusion-based molecular communication system, molecules are employed to convey information. When propagation and reception processes are considered in a framework of first passage processes, we need to focus on absorbing receivers. For this kind of molecular communication system, the characteristics of the channel is also affected by the shape of the transmitter. In the literature, most studies focus on systems with a point transmitter due to circular symmetry. In this letter, we address propagation and reception pattern for chemical signals emitted from a spherical transmitter. We also investigate the directivity gain achieved by the reflecting spherical transmitter. We quantify the power gain by measuring the received power at different angles on a circular region. Moreover, we define three metrics, i.e., the half-power pattern-width, the directivity gain, and the peak time of the signal, for analyzing the received signal pattern.

cs.ET↗

arXiv2016

SMIET: Simultaneous Molecular Information and Energy Transfer

The performance of communication systems is fundamentally limited by the loss of energy through propagation and circuit inefficiencies. In this article, we show that it is possible to achieve ultra low energy communications at the nano-scale, if diffusive molecules are used for carrying data. Whilst the energy of electromagnetic waves will inevitably decay as a function of transmission distance and time, the energy in individual molecules does not. Over time, the receiver has an opportunity to recover some, if not all of the molecular energy transmitted. The article demonstrates the potential of ultra-low energy simultaneous molecular information and energy transfer (SMIET) through the design of two different nano-relay systems, and the discusses how molecular communications can benefit more from crowd energy harvesting than traditional wave-based systems.

cs.ET↗

arXiv2016

Frequency Assignment Problem with Net Filter Discrimination Constraints

Managing radio spectrum resources is a crucial issue. The frequency assignment problem (FAP) basically aims to allocate, in an efficient manner, limited number of frequencies to communication links. Geographically close links, however, cause interference, which complicates the assignment, imposing frequency separation constraints. The FAP is closely related to the graph-coloring problem and it is an NP-hard problem. In this paper, we propose to incorporate the randomization into greedy and fast heuristics. As far as being implemented, the proposed algorithms are very straight forward and are without system parameters that need tuned. The proposed algorithms significantly improve, quickly and effectively, the solutions obtained by greedy algorithms in terms of the number of assigned frequencies and the range. The enhanced versions of proposed algorithms perform close to the lower bounds while running for a reasonable duration. Another novelty of our study is its consideration of the net filter discrimination effects in the communication model. Performance analysis is done by synthetic and measured data, where the measurement data includes the effect of the real 3-dimensional (3D) geographical features in the Daejeon region in Korea. In both cases, we observe a significant improvement by employing randomized heuristics.

cs.NI↗

arXiv2016

Effective inter-symbol interference mitigation with a limited amount of enzymes in molecular communications

In molecular communication via diffusion (MCvD), the inter-symbol interference (ISI) is a well known severe problem that deteriorates both data rates and link reliability. ISI mainly occurs due to the slow and highly random propagation of the messenger molecules, which causes the emitted molecules from the previous symbols to interfere with molecules from the current symbol. An effective way to mitigate the ISI is using enzymes to degrade undesired molecules. Prior work on ISI mitigation by enzymes has assumed an infinite amount of enzymes randomly distributed around the molecular channel. Taking a different approach, this paper assumes an MCvD channel with a limited amount of enzymes. The main question this paper addresses is how to deploy these enzymes in an effective structure so that ISI mitigation is maximized. To find an effective MCvD channel environment, this study considers optimization of the shape of the transmitter node, the deployment location and structure, the size of the enzyme deployed area, and the half-lives of the enzymes. It also analyzes the dependence of the optimum size of the enzyme area on the distance and half-life.

cs.ET↗

arXiv2016

Performance Analysis of Self-Interference Cancellation in Full-Duplex Large-Scale MIMO Systems

This paper presents the performance analysis of the self-interference cancellation (SIC) methods in full-duplex largescale multiple-input multiple-output systems. To mitigate selfinterference (SI), we assume that the full duplex-base station (BS) uses SI-subtraction or spatial suppression. Analytical and numerical results confirm that the SI-subtraction outperforms the spatial suppression for SIC in a perfect channel estimation case. It is also concluded that the uplink and overall ergodic rates performance of the spatial suppression is respectively better than those of the SI-subtraction in a imperfect channel estimation case under a given system constraint such as uplink/downlink sum rates and the total transmit power at the BS.

cs.IT↗