arXiv subjects

Chau Yuen

Publications and source records attributed to Chau Yuen.

At least 379 records · Page 21Linked to original sources

arXiv2021

Reconfigurable Intelligent Surface-Assisted Aerial-Terrestrial Communications via Multi-Task Learning

The aerial-terrestrial communication system constitutes an efficient paradigm for supporting and complementing terrestrial communications. However, the benefits of such a system cannot be fully exploited, especially when the line-of-sight (LoS) transmissions are prone to severe deterioration due to complex propagation environments in urban areas. The emerging technology of reconfigurable intelligent surfaces (RISs) has recently become a potential solution to mitigate propagation-induced impairments and improve wireless network coverage. Motivated by these considerations, in this paper, we address the coverage and link performance problems of the aerial-terrestrial communication system by proposing an RIS-assisted transmission strategy. In particular, we design an adaptive RIS-assisted transmission protocol, in which the channel estimation, transmission strategy, and data transmission are independently implemented in a frame. On this basis, we formulate an RIS-assisted transmission strategy optimization problem as a mixed-integer non-linear program (MINLP) to maximize the overall system throughput. We then employ multi-task learning to speed up the solution to the problem. Benefiting from multi-task learning, the computation time is reduced by about four orders of magnitude. Numerical results show that the proposed RIS-assisted transmission protocol significantly improves the system throughput and reduces the transmit power.

cs.NI↗

arXiv2021

Deep Learning Based Defect Detection for Solder Joints on Industrial X-Ray Circuit Board Images

Quality control is of vital importance during electronics production. As the methods of producing electronic circuits improve, there is an increasing chance of solder defects during assembling the printed circuit board (PCB). Many technologies have been incorporated for inspecting failed soldering, such as X-ray imaging, optical imaging, and thermal imaging. With some advanced algorithms, the new technologies are expected to control the production quality based on the digital images. However, current algorithms sometimes are not accurate enough to meet the quality control. Specialists are needed to do a follow-up checking. For automated X-ray inspection, joint of interest on the X-ray image is located by region of interest (ROI) and inspected by some algorithms. Some incorrect ROIs deteriorate the inspection algorithm. The high dimension of X-ray images and the varying sizes of image dimensions also challenge the inspection algorithms. On the other hand, recent advances on deep learning shed light on image-based tasks and are competitive to human levels. In this paper, deep learning is incorporated in X-ray imaging based quality control during PCB quality inspection. Two artificial intelligence (AI) based models are proposed and compared for joint defect detection. The noised ROI problem and the varying sizes of imaging dimension problem are addressed. The efficacy of the proposed methods are verified through experimenting on a real-world 3D X-ray dataset. By incorporating the proposed methods, specialist inspection workload is largely saved.

eess.IV↗

arXiv2021

Reconfigurable Intelligent Surface-Assisted MAC for Wireless Networks: Protocol Design, Analysis, and Optimization

Reconfigurable intelligent surface (RIS) is a promising reflective radio technology for improving the coverage and rate of future wireless systems by reconfiguring the wireless propagation environment. The current work mainly focuses on the physical layer design of RIS. However, enabling multiple devices to communicate with the assistance of RIS is a crucial challenging problem. Motivated by this, we explore RIS-assisted communications at the medium access control (MAC) layer and propose an RIS-assisted MAC framework. In particular, RISassisted transmissions are implemented by pre-negotiation and a multi-dimension reservation (MDR) scheme. Based on this, we investigate RIS-assisted single-channel multi-user (SCMU) communications. Wherein the RIS regarded as a whole unity can be reserved by one user to support the multiple data transmissions, thus achieving high efficient RIS-assisted connections at the user. Moreover, under frequency-selective channels, implementing the MDR scheme on the RIS group division, RISassisted multi-channel multi-user (MCMU) communications are further explored to improve the service efficiency of the RIS and decrease the computation complexity. Besides, a Markov chain is built based on the proposed RIS-assisted MAC framework to analyze the system performance of SCMU/MCMU. Then the optimization problem is formulated to maximize the overall system capacity of SCMU/MCMU with energy-efficient constraint. The performance evaluations demonstrate the feasibility and effectiveness of each

cs.NI↗

arXiv2021

Channel Estimation for Intelligent Reflecting Surface Assisted Backscatter Communication

Intelligent reflecting surface (IRS) is a promising technology to improve the performance of backscatter communication systems by smartly reconfiguring the multi-reflection channel. To fully exploit the passive beamforming gain of IRS in backscatter communication, channel state information (CSI) is indispensable but more practically challenging to acquire than conventional IRS-assisted systems, since IRS passively reflects signals over both the forward and backward (backscattering) links between the reader and tag. To address this issue, we propose in this letter a new and efficient channel estimation scheme for the IRS-assisted backscatter communication system. To minimize the mean-square error (MSE) of channel estimation, we formulate and solve an optimization problem by designing the IRS training reflection matrix for channel estimation under the constraints of unit-modulus elements and full rank. Simulation results verify the effectiveness of the proposed channel estimation scheme as compared to other baseline schemes.

cs.IT↗

arXiv2021

Intelligent Spectrum Learning for Wireless Networks with Reconfigurable Intelligent Surfaces

Reconfigurable intelligent surface (RIS) has become a promising technology for enhancing the reliability of wireless communications, which is capable of reflecting the desired signals through appropriate phase shifts. However, the intended signals that impinge upon an RIS are often mixed with interfering signals, which are usually dynamic and unknown. In particular, the received signal-to-interference-plus-noise ratio (SINR) may be degraded by the signals reflected from the RISs that originate from non-intended users. To tackle this issue, we introduce the concept of intelligent spectrum learning (ISL), which uses an appropriately trained convolutional neural network (CNN) at the RIS controller to help the RISs infer the interfering signals directly from the incident signals. By capitalizing on the ISL, a distributed control algorithm is proposed to maximize the received SINR by dynamically configuring the active/inactive binary status of the RIS elements. Simulation results validate the performance improvement offered by deep learning and demonstrate the superiority of the proposed ISL-aided approach.

eess.SP↗

arXiv2021

Underwater Acoustic Communication Receiver Using Deep Belief Network

Underwater environments create a challenging channel for communications. In this paper, we design a novel receiver system by exploring the machine learning technique--Deep Belief Network (DBN)-- to combat the signal distortion caused by the Doppler effect and multi-path propagation. We evaluate the performance of the proposed receiver system in both simulation experiments and sea trials. Our proposed receiver system comprises of DBN based de-noising and classification of the received signal. First, the received signal is segmented into frames before the each of these frames is individually pre-processed using a novel pixelization algorithm. Then, using the DBN based de-noising algorithm, features are extracted from these frames and used to reconstruct the received signal. Finally, DBN based classification of the reconstructed signal occurs. Our proposed DBN based receiver system does show better performance in channels influenced by the Doppler effect and multi-path propagation with a performance improvement of 13.2dB at $10^{-3}$ Bit Error Rate (BER).

eess.AS↗

arXiv2021

The Study of Urban Residential's Public Space Activeness using Space-centric Approach

With the advancement of the Internet of Things (IoT) and communication platform, large scale sensor deployment can be easily implemented in an urban city to collect various information. To date, there are only a handful of research studies about understanding the usage of urban public spaces. Leveraging IoT, various sensors have been deployed in an urban residential area to monitor and study public space utilization patterns. In this paper, we propose a data processing system to generate space-centric insights about the utilization of an urban residential region of multiple points of interest (PoIs) that consists of 190,000m$^2$ real estate. We identify the activeness of each PoI based on the spectral clustering, and then study their corresponding static features, which are composed of transportation, commercial facilities, population density, along with other characteristics. Through the heuristic features inferring, the residential density and commercial facilities are the most significant factors affecting public place utilization.

stat.AP↗

arXiv2021

Time-Series Regeneration with Convolutional Recurrent Generative Adversarial Network for Remaining Useful Life Estimation

For health prognostic task, ever-increasing efforts have been focused on machine learning-based methods, which are capable of yielding accurate remaining useful life (RUL) estimation for industrial equipment or components without exploring the degradation mechanism. A prerequisite ensuring the success of these methods depends on a wealth of run-to-failure data, however, run-to-failure data may be insufficient in practice. That is, conducting a substantial amount of destructive experiments not only is high costs, but also may cause catastrophic consequences. Out of this consideration, an enhanced RUL framework focusing on data self-generation is put forward for both non-cyclic and cyclic degradation patterns for the first time. It is designed to enrich data from a data-driven way, generating realistic-like time-series to enhance current RUL methods. First, high-quality data generation is ensured through the proposed convolutional recurrent generative adversarial network (CR-GAN), which adopts a two-channel fusion convolutional recurrent neural network. Next, a hierarchical framework is proposed to combine generated data into current RUL estimation methods. Finally, the efficacy of the proposed method is verified through both non-cyclic and cyclic degradation systems. With the enhanced RUL framework, an aero-engine system following non-cyclic degradation has been tested using three typical RUL models. State-of-art RUL estimation results are achieved by enhancing capsule network with generated time-series. Specifically, estimation errors evaluated by the index score function have been reduced by 21.77%, and 32.67% for the two employed operating conditions, respectively. Besides, the estimation error is reduced to zero for the Lithium-ion battery system, which presents cyclic degradation.

cs.LG↗

arXiv2021

A Transfer Learning-based State of Charge Estimation for Lithium-Ion Battery at Varying Ambient Temperatures

Accurate and reliable state of charge (SoC) estimation becomes increasingly important to provide a stable and efficient environment for Lithium-ion batteries (LiBs) powered devices. Most data-driven SoC models are built for a fixed ambient temperature, which neglect the high sensitivity of LiBs to temperature and may cause severe prediction errors. Nevertheless, a systematic evaluation of the impact of temperature on SoC estimation and ways for a prompt adjustment of the estimation model to new temperatures using limited data have been hardly discussed. To solve these challenges, a novel SoC estimation method is proposed by exploiting temporal dynamics of measurements and transferring consistent estimation ability among different temperatures. First, temporal dynamics, which is presented by correlations between the past fluctuation and the future motion, is extracted using canonical variate analysis. Next, two models, including a reference SoC estimation model and an estimation ability monitoring model, are developed with temporal dynamics. The monitoring model provides a path to quantitatively evaluate the influences of temperature on SoC estimation ability. After that, once the inability of the reference SoC estimation model is detected, consistent temporal dynamics between temperatures are selected for transfer learning. Finally, the efficacy of the proposed method is verified through a benchmark. Our proposed method not only reduces prediction errors at fixed temperatures (e.g., reduced by 24.35% at -20°C, 49.82% at 25°C) but also improves prediction accuracies at new temperatures.

cs.LG↗

arXiv2021

WiMesh: Leveraging Mesh Networking For Disaster Communication in Poor Regions of the World

This paper discusses the design, implementation and field trials of WiMesh - a resilient Wireless Mesh Network (WMN) based disaster communication system purpose-built for underdeveloped and rural parts of the world. Mesh networking is a mature area, and the focus of this paper is not on proposing novel models, protocols or other mesh solutions. Instead, the paper focuses on the identification of important design considerations and justifications for several design trade offs in the context of mesh networking for disaster communication in developing countries with very limited resources. These trade-offs are discussed in the context of key desirable traits including security, low cost, low power, size, availability, customization, portability, ease of installation and deployment, and coverage area among others. We discuss at length the design, implementation, and field trial results of the WiMesh system which enables users spread over large geographical regions, to communicate with each other despite the lack of cellular coverage, power, and other communication infrastructure by leveraging multi-hop mesh networking and Wi-Fi equipped handheld devices. Lessons learned along with real-world results are shared for WiMesh deployment in a remote rural mountainous village of Pakistan, and the source code is shared with the research community.

cs.NI↗

arXiv2020

Refined Nonlinear Rectenna Modeling and Optimal Waveform Design for Multi-User Multi-Antenna Wireless Power Transfer

In this paper, we study the optimal waveform design for wireless power transfer (WPT) from a multi-antenna energy transmitter (ET) to multiple single-antenna energy receivers (ERs) simultaneously in multi-path frequency-selective channels. First, we propose a refined nonlinear current-voltage model of the diode in the ER rectifier, and accordingly derive new expressions for the output direct current (DC) voltage and corresponding harvested power at the ER. Leveraging this new rectenna model, we first consider the single-ER case and study the multisine-based power waveform design based on the wireless channel to maximize the harvested power at the ER. We propose two efficient algorithms for finding high-quality suboptimal solutions to this non-convex optimization problem. Next, we extend our formulated waveform design problem to the general multi-ER case for maximizing the weighted sum of the harvested powers by all ERs, and propose an efficient difference-of-convex functions programming (DCP)-based algorithm for solving this problem. Finally, we demonstrate the superior performance of our proposed waveform designs based on the new rectenna model over existing schemes/models via simulations.

cs.IT↗

arXiv2020

Secure Beamforming for Multiple Intelligent Reflecting Surfaces Aided mmWave Systems

In this letter, secure beamforming in a multiple intelligent reflecting surfaces (IRSs)-aided millimeter-wave (mmWave) system is investigated. In this system, the secrecy rate is maximized by controlling the on-off status of each IRS as well as optimizing the phase shift matrix of the IRSs. This problem is posed as a joint optimization problem of transmit beamforming and IRS control, whose goal is to maximize the secrecy rate under the total transmission power and unit-modulus constraints. The problem is difficult to solve optimally due to the nonconvexity of constraint conditions and coupled variables. To deal with this problem, we propose an alternating optimization (AO)-based algorithm based on successive convex approximation (SCA) and manifold optimization (MO) technologies. Numerical simulations show that the proposed AO-based algorithm can effectively improve the secrecy rate and outperforms the traditional single IRS-aided scheme.

eess.SP↗

arXiv2020

Multiple-Perspective Clustering of Passive Wi-Fi Sensing Trajectory Data

Information about the spatiotemporal flow of humans within an urban context has a wide plethora of applications. Currently, although there are many different approaches to collect such data, there lacks a standardized framework to analyze it. The focus of this paper is on the analysis of the data collected through passive Wi-Fi sensing, as such passively collected data can have a wide coverage at low cost. We propose a systematic approach by using unsupervised machine learning methods, namely k-means clustering and hierarchical agglomerative clustering (HAC) to analyze data collected through such a passive Wi-Fi sniffing method. We examine three aspects of clustering of the data, namely by time, by person, and by location, and we present the results obtained by applying our proposed approach on a real-world dataset collected over five months.

cs.LG↗

arXiv2020

Deep Reinforcement Learning Based Massive Access Management for Ultra-Reliable Low-Latency Communications

With the rapid deployment of the Internet of Things (IoT), fifth-generation (5G) and beyond 5G networks are required to support massive access of a huge number of devices over limited radio spectrum radio. In wireless networks, different devices have various quality-of-service (QoS) requirements, ranging from ultra-reliable low latency communications (URLLC) to high transmission data rates. In this context, we present a joint energy-efficient subchannel assignment and power control approach to manage massive access requests while maximizing network energy efficiency (EE) and guaranteeing different QoS requirements. The latency constraint is transformed into a data rate constraint which makes the optimization problem tractable before modelling it as a multi-agent reinforcement learning problem. A distributed cooperative massive access approach based on deep reinforcement learning (DRL) is proposed to address the problem while meeting both reliability and latency constraints on URLLC services in massive access scenario. In addition, transfer learning and cooperative learning mechanisms are employed to enable communication links to work cooperatively in a distributed manner, which enhances the network performance and access success probability. Simulation results clearly show that the proposed distributed cooperative learning approach outperforms other existing approaches in terms of meeting EE and improving the transmission success probability in massive access scenario.

eess.SP↗

arXiv2020

Urban Space Insights Extraction using Acoustic Histogram Information

Urban data mining can be identified as a highly potential area that can enhance the smart city services towards better sustainable development especially in the urban residential activity tracking. While existing human activity tracking systems have demonstrated the capability to unveil the hidden aspects of citizens' behavior, they often come with a high implementation cost and require a large communication bandwidth. In this paper, we study the implementation of low-cost analogue sound sensors to detect outdoor activities and estimate the raining period in an urban residential area. The analogue sound sensors are transmitted to the cloud every 5 minutes in histogram format, which consists of sound data sampled every 100ms (10Hz). We then use wavelet transformation (WT) and principal component analysis (PCA) to generate a more robust and consistent feature set from the histogram. After that, we performed unsupervised clustering and attempt to understand the individual characteristics of each cluster to identify outdoor residential activities. In addition, on-site validation has been conducted to show the effectiveness of our approach.

stat.AP↗

arXiv2020

Edge Intelligence for Autonomous Driving in 6G Wireless System: Design Challenges and Solutions

In a level-5 autonomous driving system, the autonomous driving vehicles (AVs) are expected to sense the surroundings via analyzing a large amount of data captured by a variety of onboard sensors in near-real-time. As a result, enormous computing costs will be introduced to the AVs for processing the tasks with the deployed machine learning (ML) model, while the inference accuracy may not be guaranteed. In this context, the advent of edge intelligence (EI) and sixth-generation (6G) wireless networking are expected to pave the way to more reliable and safer autonomous driving by providing multi-access edge computing (MEC) together with ML to AVs in close proximity. To realize this goal, we propose a two-tier EI-empowered autonomous driving framework. In the autonomous-vehicles tier, the autonomous vehicles are deployed with the shallow layers by splitting the trained deep neural network model. In the edge-intelligence tier, an edge server is implemented with the remaining layers (also deep layers) and an appropriately trained multi-task learning (MTL) model. In particular, obtaining the optimal offloading strategy (including the binary offloading decision and the computational resources allocation) can be formulated as a mixed-integer nonlinear programming (MINLP) problem, which is solved via MTL in near-real-time with high accuracy. On another note, an edge-vehicle joint inference is proposed through neural network segmentation to achieve efficient online inference with data privacy-preserving and less communication delay. Experiments demonstrate the effectiveness of the proposed framework, and open research topics are finally listed.

cs.NI↗

arXiv2020

Joint Channel Estimation and Signal Recovery in RIS-Assisted Multi-User MISO Communications

Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks. Their dynamic and low-power configuration enables coverage extension, massive connectivity, and low-latency communications. Channel estimation and signal recovery in RISbased systems are among the most critical technical challenges, due to the large number of unknown variables referring to the RIS unit elements and the transmitted signals. In this paper, we focus on the downlink of a RIS-assisted multi-user Multiple Input Single Output (MISO) communication system and present a joint channel estimation and signal recovery scheme based on the PARAllel FACtor (PARAFAC) decomposition. This decomposition unfolds the cascaded channel model and facilitates signal recovery using the Bilinear Generalized Approximate Message Passing (BiG-AMP) algorithm. The proposed method includes an alternating least squares algorithm to iteratively estimate the equivalent matrix, which consists of the transmitted signals and the channels between the base station and RIS, as well as the channels between the RIS and the multiple users. Our selective simulation results show that the proposed scheme outperforms a benchmark scheme that uses genie-aided information knowledge. We also provide insights on the impact of different RIS parameter settings on the proposed scheme.

cs.IT↗

arXiv2020

Peer-to-Peer Energy Systems for Connected Communities: A Review of Recent Advances and Emerging Challenges

After a century of relative stability of the electricity industry, extensive deployment of distributed energy resources and recent advances in computation and communication technologies have changed the nature of how we consume, trade, and apply energy. The power system is facing a transition from its traditional hierarchical structure to a more deregulated model by introducing new energy distribution models such as peer-to-peer sharing for connected communities. The proven effectiveness of P2P sharing in benefiting both prosumers and the grid has been demonstrated in many studies and pilot projects. However, there is still no extensive implementation of such sharing models in today's electricity markets. This paper aims to shed some light on this gap through a comprehensive overview of recent advances in the P2P energy system and an insightful discussion of the challenges that need to be addressed in order to establish P2P sharing as a viable energy management option in today's electricity market. To this end, in this article, we provide some background on different aspects of P2P sharing. Then, we discuss advances in P2P sharing through a systematic domain-based classification. We also review different pilot projects on P2P sharing across the globe. Finally, we identify and discuss a number of challenges that need to be addressed for scaling up P2P sharing in the electricity market followed by concluding remarks at the end of the paper.

cs.DC↗