arXiv subjects

Cheng Shao

Publications and source records attributed to Cheng Shao.

13 recordsLinked to original sources

arXiv2025

Over One Order of Magnitude Enhancement in Hole Mobility of 2D III-V Semiconductors through Valence Band Edge Shift

Two-dimensional (2D) semiconductors show great potential to sustain Moore's law in the era of ultra-scaled electronics. However, their scalable applications are severely constrained by low hole mobility. In this work, we take 2D-GaAs as a prototype of III-V semiconductors to investigate the effects of quantum anharmonicity (QA) on hole transport, employing the stochastic self-consistent harmonic approximation assisted by the machine learning potential. It is found that the room-temperature hole mobility of 2D-GaAs is reduced by $\sim$44% as the QA effects are incorporated, which is attributed to the enhanced electron-phonon scattering from the out-of-plane acoustic polarization. The valence band edge shift (VBES) strategy is proposed to increase the hole mobility by $\sim$1600% at room temperature, which can be realized by 1% biaxial compressive strain. The electron-phonon scattering rate is dramatically decreased due to the full filtering of the original interband electron-phonon scattering channels that existed in the flat hole pocket. The VBES strategy can be further extended to other 2D III-V semiconductors to promote their hole mobilities.

cond-mat.mtrl-sci↗

arXiv2025

Revisiting the Mechanisms of Thermal Transport in Vacancy-Defective Silicon

Understanding heat conduction in defective silicon is crucial for electronics and thermoelectrics. Conventional understanding relies on phonon gas picture, treating defects as scattering centers that reduce phonon lifetimes without altering frequencies and group velocities. We go beyond phonon gas picture by employing Wigner transport equation to investigate heat conduction in vacancy-defected silicon. Our findings reveal that while thermal conduction in pristine silicon stems mainly from particle-like propagation of vibrational modes, wave-like tunnelling becomes increasingly significant in the presence of vacancies. Contrary to the conventional belief that defects only perturb mode lifetimes, we demonstrate that vacancies also diminish velocity operators, a dominant factor in thermal conductivity reduction, surpassing even the effect of lifetime shortening. Furthermore, incorporating anharmonic frequencies and interatomic force constants shows that while anharmonicity suppresses thermal conductivity in pristine silicon, this effect weakens with vacancy concentration and reverses to enhance conductivity. These findings challenge conventional knowledge and provide new insights into thermal conduction in defective materials.

cond-mat.mtrl-sci↗

arXiv2025

Softening of Vibrational Modes and Anharmonicity Induced Thermal Conductivity Reduction in a-Si:H at High Temperatures

Hydrogenated amorphous silicon (a-Si:H) has garnered considerable attention in the semiconductor industry, particularly for its use in solar cells and passivation layers for high performance silicon solar cells, owing to its exceptional photoelectric properties and scalable manufacturing processes. A comprehensive understanding of thermal transport mechanism in a-Si:H is essential for optimizing thermal management and ensuring the reliable operation of these devices. In this study, we developed a neuroevolution machine learning potential based on first-principles calculations of energy, forces, and virial, which enables accurate modeling of interatomic interactions in both a-Si:H and a-Si systems. Using the homogeneous nonequilibrium molecular dynamics (HNEMD) method, we systematically investigated the thermal conductivity of a-Si:H and a-Si across a temperature range of 300-1000 K and hydrogen concentrations ranging from 6 to 12 at%. Our simulation results found that thermal conductivity of a-Si:H with 12 at% hydrogen was significantly reduced by 12% compared to that of a-Si at 300 K. We analyzed the spectral thermal conductivity, vibrational density of states and lifetimes of vibrational modes, and revealed the softening of vibrational modes and anharmonicity effects contribute to the reduction of thermal conductivity as temperature and hydrogen concentration increase. Furthermore, the influence of hydrogen concentration and temperature on diffuson and propagon contribution to thermal conductivity of a-Si:H was revealed. This study provides valuable insights for developing thermal management strategies in silicon-based semiconducting devices and advances the understanding of thermal transport in amorphous systems.

cond-mat.mtrl-sci↗

arXiv2024

Discovery of an ultrastable antiferromagnetic two-dimensional CrF3 phase with anisotropic quasi-one-dimensional mechanical, electronic, and thermal properties

We report the discovery of an ultra-stable antiferromagnetic two-dimensional (2D) CrF3 phase that is energetically more favorable than the traditionally assumed hexagonal structure. Using first-principles calculations and evolutionary structure searches, we identify a new low-energy rectangular configuration of CrF3 with remarkable anisotropic properties. Mechanically, this phase exhibits zero in-plane Poisson's ratio, a rare negative out-of-plane Poisson's ratio, and quasi-one-dimensional (quasi-1D) behavior characterized by minimal coupling between orthogonal directions. Electronically, CrF3 shows quasi-1D transport with two independent conduction bands near the Fermi level, tunable via uniaxial strain. The calculated bandgap is 3.05 eV, which can be modulated under strain, enabling control over its electronic properties. The material also displays out-of-plane antiferromagnetic ordering with a magnetic anisotropy energy of 0.098 meV per Cr atom and an estimated Neel temperature of 20 K. Additionally, we investigate the thermal conductivity of monolayer rectangular CrF3 (r-CrF3), revealing significant anisotropy in heat transport. The thermal conductivity along the y-axis is approximately 60.5 W/mK at 300 K, much higher than along the x-axis at 13.2 W/mK. The thermal anisotropic factor is 4.58, surpassing that of other 2D materials like black phosphorene, WTe2, and arsenene, highlighting r-CrF3's potential for advanced directional heat management. Consequently, the rectangular CrF3 phase is a promising candidate for applications in spintronics, strain-engineered nanoelectronics, mechanical metamaterials, and thermal management technologies.

cond-mat.mtrl-sci↗

arXiv2024

Unlocking high hole mobility in diamond over a wide temperature range via efficient shear strain

As a wide bandgap semiconductor, diamond holds both excellent electrical and thermal properties, making it highly promising in the electrical industry. However, its hole mobility is relatively low and dramatically decreases with increasing temperature, which severely limits further applications. Herein, we proposed that the hole mobility can be efficiently enhanced via slight compressive shear strain along the [100] direction, while the improvement via shear strain along the [111] direction is marginal. This impressive distinction is attributed to the deformation potential and the elastic compliance matrix. The shear strain breaks the symmetry of the crystalline structure and lifts the band degeneracy near the valence band edge, resulting in a significant suppression of interband electron-phonon scattering. Moreover, the hole mobility becomes less temperature-dependent due to the decrease of electron scatterings from high-frequency acoustic phonons. Remarkably, the in-plane hole mobility of diamond is increased by approximately 800% at 800 K with a 2% compressive shear strain along the [100] direction. The efficient shear strain strategy can be further extended to other semiconductors with face-centered cubic geometry.

cond-mat.mtrl-sci↗

arXiv2024

Diverse Responses in Lattice Thermal Conductivity of $n$-type/$p$-type Semiconductors Driven by Asymmetric Electron-Phonon Interactions

Accurately assessing the impact of electron-phonon interaction (EPI) on the lattice thermal conductivity of semiconductors is crucial for the thermal management of electronic devices and a unified physical understanding of this issue is highly desired. In this work, we predict the lattice thermal conductivities of typical direct and indirect bandgap semiconductors accounting for EPI based on mode-level first-principles calculations. It is found that EPI has a larger effect on the lattice thermal conductivity of $p$-type doping compared to $n$-type doping in the same semiconductor at high charge carrier concentrations. The stronger EPI in $p$-type doping is attributed to the relatively higher electron density of states caused by the relatively larger $p$-orbital component. Furthermore, EPI has a stronger influence on the lattice thermal conductivity of $n$-type indirect bandgap semiconductors than $n$-type direct bandgap semiconductors. This is attributed to the relatively lower electron density of states in direct bandgap semiconductors stemming from the $s$-orbital component. This work reveals that there exist diverse responses in lattice thermal conductivity of $n$-type/$p$-type semiconductors, which can be attributed to asymmetric EPIs.

cond-mat.mtrl-sci↗

arXiv2024

Giant enhancement of hole mobility for 4H-silicon carbide through suppressing interband electron-phonon scattering

4H-Silicon Carbide (4H-SiC) possesses a high Baliga figure of merit, making it a promising material for power electronics. However, its applications are limited by its low hole mobility. Herein, we found that the hole mobility of 4H-SiC is mainly limited by the strong interband electron-phonon scattering using mode-level first-principles calculations. Our research indicates that applying compressive strain can reverse the sign of crystal-field splitting and change the ordering of electron bands close to the valence band maximum. Therefore, the interband electron-phonon scattering is severely suppressed, and the out-of-plane hole mobility of 4H-SiC can be enhanced by 200% with 2% uniaxial compressive strain applied. This work provides new insights into the electron transport mechanisms in semiconductors and suggests a strategy to improve hole mobility that could be applied to other semiconductors with hexagonal crystalline geometries.

cond-mat.mtrl-sci↗

arXiv2024

Revisiting phonon thermal transport in two-dimensional gallium nitride: higher-order phonon-phonon and phonon-electron scattering

Two-dimensional gallium nitride (2D-GaN) has great potential in power electronics and optoelectronics. Heat dissipation is a critical issue for these applications of 2D-GaN. Previous studies showed that higher-order phonon-phonon scattering has extremely strong effects on the lattice thermal conductivity of 2D-GaN, which exhibits noticeable discrepancies with lattice thermal conductivity calculated from molecular dynamics. In this work, it is found that the fourth-order interatomic force constants (4th-IFCs) of 2D-GaN are quite sensitive to atomic displacement in the finite different method. The effects of the four-phonon scattering can be severely overestimated with non-convergent 4th-IFCs. The lattice thermal conductivity from three-phonon scattering is reduced by 65.6% due to four-phonon scattering. The reflection symmetry allows significantly more four-phonon processes than three-phonon processes. It was previously thought the electron-phonon interactions have significant effects on the lattice thermal conductivity of two-dimensional materials. However, the effects of phonon-electron interactions on the lattice thermal conductivity of both n-type and p-type 2D-GaN at high charge carrier concentrations can be neglected due to the few phonon-electron scattering channels and the relatively strong four-phonon scattering.

cond-mat.mtrl-sci↗

arXiv2024

Weak effects of electron-phonon interactions on the lattice thermal conductivity of wurtzite GaN with high electron concentrations

Wurtzite gallium nitride (GaN) has great potential for high-frequency and high-power applications due to its excellent electrical and thermal transport properties. However, enhancing the performance of GaN-based power electronics relies on heavy doping. Previous studies showed that electron-phonon interactions have strong effects on the lattice thermal conductivity of GaN due to the Fr\"ohlich interaction. Surprisingly, our investigation reveals weak effects of electron-phonon interactions on the lattice thermal conductivity of n-type GaN at ultra-high electron concentrations and the impact of the Fr\"ohlich interaction can be ignored. The small phonon-electron scattering rate is attributed to the limited scattering channels, quantified by the Fermi surface nesting function. In contrast, there is a significant reduction in the lattice thermal conductivity of p-type GaN at high hole concentrations due to the relatively larger Fermi surface nesting function. Meanwhile, as p-type GaN has relatively smaller electron-phonon matrix elements, the reduction in lattice thermal conductivity is still weaker than that observed in p-type silicon. Our work provides a deep understanding of thermal transport in doped GaN and the conclusions can be further extended to other wide-bandgap semiconductors, including $\beta$-Ga2O3, AlN, and ZnO.

cond-mat.mtrl-sci↗

arXiv2022

Effect of anharmonicity on the thermal conductivity of amorphous silica

Proper consideration of anharmonicity is important for the calculation of the thermal conductivity. However, how the anharmonicity influences the thermal conduction in amorphous materials is still an open question. In this work, we uncover the role of anharmonicity on the thermal conductivity of amorphous silica (a-SiO2) by comparing the thermal conductivity predicted from the harmonic theory and the anharmonic theory. Moreover, we explore the effect of anharmonicity-induced frequency shift on the prediction of the thermal conductivity. It is found that the thermal conductivity calculated by the recently developed anharmonic theory (quasi-harmonic Green-Kubo approximation, QHGK) is higher than that by the harmonic theory developed by Allen and Feldman. The use of anharmonic vibrational frequencies also leads to a higher thermal conductivity compared with that calculated using harmonic vibrational frequencies. The anharmonicity induced frequency shifts is a mechanism for the positive temperature dependence of the thermal conductivity of a-SiO2 at higher temperatures. Further investigation on mode diffusivity suggests that although anharmonicity has larger influence on locons than diffusons, the increase of the thermal conductivity due to the anharmonicity is mainly contributed by the anharmonicity induced increase of the diffusivity of diffusons. Finally, it is found that the cross-correlations between diffusons and diffusons contribute most to the thermal conductivity of a-SiO2, and the locons contribute to the thermal conductivity mainly through collaboration with diffusons. These results offer new insights into the nature of the thermal conduction in a-SiO2.

cond-mat.mtrl-sci↗

arXiv2021

Scalable monolayer-functionalized nanointerface for thermal conductivity enhancement in copper/diamond composite

Aiming at developing high thermal conductivity copper/diamond composite, an unconventional approach applying self-assembled monolayer (SAM) prior to the high-temperature sintering of copper/diamond composite was utilized to enhance the thermal boundary conductance (TBC) between copper and diamond. The enhancement was first systematically confirmed on a model interface system by detailed SAM morphology characterization and TBC measurements. TBC significantly depends on the SAM coverage and ordering, and the formation of high-quality SAM promoted the TBC to 73 MW/m^2-K from 27 MW/m^2-K, the value without SAM. With the help of molecular dynamics simulations, the TBC enhancement was identified to be determined by the number of SAM bridges and the overlap of vibrational density of states. The diamond particles of 210 {\micro\metre} in size were simultaneously functionalized by SAM with the condition giving the highest TBC in the model system and sintered together with the copper to fabricate isotropic copper/diamond composite of 50% volume fraction. The measured thermal conductivity marked 711 W/m-K at room temperature, the highest value among the ones with similar diamond-particles volume fraction and size. This work demonstrates a novel strategy to enhance the thermal conductivity of composite materials by SAM functionalization.

cond-mat.mtrl-sci↗

arXiv2017

Probing the phonon surface interaction by wave packet simulation: effect of roughness and morphology

One way to reduce the lattice thermal conductivity of solids is to induce additional phonon surface scattering through nanostructures. However, how phonons interact with boundaries, especially at the atomic level, is not well understood. In this work, we performed two-dimensional atomistic wave packet simulations to investigate the phonon surface interaction. Emphasis has been given to the angular-resolved phonon reflection at smooth, periodically rough, and amorphous surfaces. We found that the acoustic phonon reflection at a smooth surface is not simply specular. Mode conversion can occur after reflection, and the detailed energy distribution after reflection will dependent on surface condition and polarization of incident phonon. At periodically rough surfaces, the reflected wave packet distribution does not follow the well-known Ziman's model, but shows a nonmonotonic dependence on the depth of surface roughness. When an amorphous layer is attached to the surface, the incident wave packet will be absorbed by the amorphous region, and results in quite diffusive reflection. Our results clearly show that the commonly used specular-diffusive model is not enough to describe the phonon reflection at a periodically rough surface, while an amorphous layer can induce strong diffusive reflection. This work provides a careful analysis of phonon reflection at a surface with different morphology, which is important to a better understanding of thermal transport in various nanostructures.

cond-mat.mes-hall↗

arXiv2007

A Modified Iterative IOM Approach for Optimization of Biochemical Systems

The presented previously indirect optimization method (IOM) developed within biochemical systems theory (BST) provides a versatile and mathematically tractable optimization strategy for biochemical systems. However, due to the local approximations nature of the BST formalism, the iterative version of this technique possibly does not yield the true optimum solution. In this work, an algorithm is proposed to obtain the correct and consistent optimum steady-state operating point of biochemical systems. The existing linear optimization problem of the direct IOM approach is modified by adding an equality constraint of describing the consistency of solutions between the S-system and the original model. Lagrangian analysis is employed to derive the first order necessary optimality conditions for the above modified optimization problem. This leads to a procedure that may be regarded as a modified iterative IOM approach in which the optimization objective function includes an extra linear term. The extra term contains a comparison of metabolite concentration derivatives with respect to the enzyme activities between the S-system and the original model and ensures that the new algorithm is still carried out within linear programming techniques. The presented framework is applied to several biochemical systems and shown to the tractability and effectiveness of the method. The simulation is also studied to investigate the convergence properties of the algorithm and to give a performance comparison of standard and modified iterative IOM approach.

q-bio.QM↗