arXiv subjects

Cheng-Xiang Wang

Publications and source records attributed to Cheng-Xiang Wang.

At least 91 records · Page 5Linked to original sources

arXiv2021

A 2D Non-Stationary Channel Model for Underwater Acoustic Communication Systems

Underwater acoustic (UWA) communication plays a key role in the process of exploring and studying the ocean. In this paper, a modified non-stationary wideband channel model for UWA communication in shallow water scenarios is proposed. In this geometry-based stochastic model (GBSM), multiple motion effects, time-varying angles, distances, clusters' locations with the channel geometry, and the ultra-wideband property are considered, which makes the proposed model more realistic and capable of supporting long time/distance simulations. Some key statistical properties are investigated, including temporal autocorrelation function (ACF), power delay profile (PDP), average delay, and root mean square (RMS) delay spread. The impacts of multiple motion factors on temporal ACFs are analyzed. Simulation results show that the proposed model can mimic the non-stationarity of UWA channels. Finally, the proposed model is validated with measurement data.

eess.SP↗

arXiv2021

A Novel 3D Non-Stationary GBSM for 6G THz Ultra-Massive MIMO Wireless Systems

Terahertz (THz) communication is now being considered as one of possible technologies for the sixth generation (6G) wireless communication systems. In this paper, a novel three-dimensional (3D) space-time-frequency non-stationary theoretical channel model is first proposed for 6G THz wireless communication systems employing ultra-massive multiple-input multiple-output (MIMO) technologies with long traveling paths. Considering frequency-dependent diffuse scattering, which is a special property of THz channels different from millimeter wave (mmWave) channels, the relative angles and delays of rays within one cluster will evolve in the frequency domain. Then, a corresponding simulation model is proposed with discrete angles calculated using the method of equal area (MEA). The statistical properties of the proposed theoretical and simulation models are derived and compared, showing good agreements. The accuracy and flexibility of the proposed simulation model are demonstrated by comparing the simulation results of the relative angle spread and root mean square (RMS) delay spread with corresponding measurements.

eess.SP↗

arXiv2021

A 3D Non-Stationary Geometry-Based Stochastic Model for Industrial Automation Wireless Communication Systems

Industrial automation is one of the key application scenarios of the fifth (5G) wireless communication network. The high requirements of industrial communication systems for latency and reliability lead to the need for industrial channel models to support massive multiple-input multipleoutput (MIMO) and millimeter wave communication. In addition, due to the complex environment, huge communication equipment, and numerous metal scatterers, industrial channels have special rich dense multipath components (DMCs). Considering these characteristics, a novel three dimensional (3D) non-stationary geometry-based stochastic model (GBSM) for industrial automation wireless channel is proposed in this paper. Channel characteristics including the transfer function, time-varying space-time-frequency correlation function (STFCF), and root mean square (RMS) delay spread, model parameters including delay scaling factor and power decay factor are studied and analyzed. Besides, according to the indoor factory scenario classification of the 3rd Generation Partnership Project (3GPP) TR 38.901, two sub-scenarios considering the clutter density are simulated. Simulated cumulative distribution functions (CDFs) of RMS delay spread show a good consistency with the measurement data.

eess.SP↗

arXiv2021

A 3D Non-Stationary Channel Model for 6G Wireless Systems Employing Intelligent Reflecting Surfaces with Practical Phase Shifts

In this paper, a three-dimensional (3D) geometry based stochastic model (GBSM) for a massive multiple-input multiple-output (MIMO) communication system employing practical discrete intelligent reflecting surface (IRS) is proposed. The proposed channel model supports the scenario where both transceivers and environments move. The evolution of clusters in the space domain and the practical discrete phase shifts are considered in the channel model. The steering vector is set at the base station for the cooperation with IRS. Through studying statistical properties, the non-stationary properties are verified. We find that IRS plays a role in separating the whole channel and make the absolute value of time autocorrelation function (ACF) larger than the situation without employing IRS. Time ACF of the case using discrete phase shifts is also compared with the continuous case.

eess.SP↗

arXiv2021

A General 3D Space-Time-Frequency Non-Stationary THz Channel Model for 6G Ultra-Massive MIMO Wireless Communication Systems

In this paper, a novel three-dimensional (3D) space-time-frequency (STF) non-stationary geometry-based stochastic model (GBSM) is proposed for the sixth generation (6G) terahertz (THz) wireless communication systems. The proposed THz channel model is very general having the capability to capture different channel characteristics in multiple THz application scenarios such as indoor scenarios, device-to-device (D2D) communications, ultra-massive multiple-input multiple-output (MIMO) communications, and long traveling paths of users. Also, the generality of the proposed channel model is demonstrated by the fact that it can easily be reduced to different simplified channel models to fit specific scenarios by properly adjusting model parameters. The proposed general channel model takes into consideration the non-stationarities in space, time, and frequency domains caused by ultra-massive MIMO, long traveling paths, and large bandwidths of THz communications, respectively. Statistical properties of the proposed general THz channel model are investigated. The accuracy and generality of the proposed channel model are verified by comparing the simulation results of the relative angle spread and root mean square (RMS) delay spread with corresponding channel measurements.

eess.SP↗

arXiv2021

A 3D Non-stationary MmWave Channel Model for Vacuum Tube Ultra-High-Speed Train Channels

As a potential development direction of future transportation, the vacuum tube ultra-high-speed train (UHST) wireless communication systems have newly different channel characteristics from existing high-speed train (HST) scenarios. In this paper, a three-dimensional non-stationary millimeter wave (mmWave) geometry-based stochastic model (GBSM) is proposed to investigate the channel characteristics of UHST channels in vacuum tube scenarios, taking into account the waveguide effect and the impact of tube wall roughness on channel. Then, based on the proposed model, some important time-variant channel statistical properties are studied and compared with those in existing HST and tunnel channels. The results obtained show that the multipath effect in vacuum tube scenarios will be more obvious than tunnel scenarios but less than existing HST scenarios, which will provide some insights for future research on vacuum tube UHST wireless communications.

eess.SP↗

arXiv2021

5G Embraces Satellites for 6G Ubiquitous IoT: Basic Models for Integrated Satellite Terrestrial Networks

Terrestrial communication networks mainly focus on users in urban areas but have poor coverage performance in harsh environments, such as mountains, deserts, and oceans. Satellites can be exploited to extend the coverage of terrestrial fifth-generation (5G) networks. However, satellites are restricted by their high latency and relatively low data rate. Consequently, the integration of terrestrial and satellite components has been widely studied, to take advantage of both sides and enable seamless broadband coverage. Due to the significant differences between satellite communications (SatComs) and terrestrial communications (TerComs) in terms of channel fading, transmission delay, mobility, and coverage performance, the establishment of an efficient hybrid satellite-terrestrial network (HSTN) still faces many challenges. In general, it is difficult to decompose a HSTN into a sum of separate satellite and terrestrial links due to the complicated coupling relationships therein. To uncover the complete picture of HSTNs, we regard the HSTN as a combination of basic cooperative models that contain the main traits of satellite-terrestrial integration but are much simpler and thus more tractable than the large-scale heterogeneous HSTNs. In particular, we present three basic cooperative models, i.e., model X, model L, and model V, and provide a survey of the state-of-the-art technologies for each of them. We discuss future research directions towards establishing a cell-free, hierarchical, decoupled HSTN. We also outline open issues to envision an agile, smart, and secure HSTN for the sixth-generation (6G) ubiquitous Internet of Things (IoT).

cs.IT↗

arXiv2021

Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges

With the rapid development of marine activities, there has been an increasing number of maritime mobile terminals, as well as a growing demand for high-speed and ultra-reliable maritime communications to keep them connected. Traditionally, the maritime Internet of Things (IoT) is enabled by maritime satellites. However, satellites are seriously restricted by their high latency and relatively low data rate. As an alternative, shore & island-based base stations (BSs) can be built to extend the coverage of terrestrial networks using fourth-generation (4G), fifth-generation (5G), and beyond 5G services. Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs. Despite of all these approaches, there are still open issues for an efficient maritime communication network (MCN). For example, due to the complicated electromagnetic propagation environment, the limited geometrically available BS sites, and rigorous service demands from mission-critical applications, conventional communication and networking theories and methods should be tailored for maritime scenarios. Towards this end, we provide a survey on the demand for maritime communications, the state-of-the-art MCNs, and key technologies for enhancing transmission efficiency, extending network coverage, and provisioning maritime-specific services. Future challenges in developing an environment-aware, service-driven, and integrated satellite-air-ground MCN to be smart enough to utilize external auxiliary information, e.g., sea state and atmosphere conditions, are also discussed.

cs.NI↗

arXiv2021

A General 3D Non-Stationary Massive MIMO GBSM for 6G Communication Systems

A general three-dimensional (3D) non-stationary massive multiple-input multiple-output (MIMO) geometry-based stochastic model (GBSM) for the sixth generation (6G) communication systems is proposed in the paper. The novelty of the model is that the model is designed to cover a variety of channel characteristics, including space-time-frequency (STF) non-stationarity, spherical wavefront, spatial consistency, channel hardening, etc. Firstly, the introduction of the twin-cluster channel model is given in detail. Secondly, the key statistical properties such as space-time-frequency correlation function (STFCF), space cross-correlation function (CCF), temporal autocorrelation function (ACF), frequency correlation function (FCF), and performance indicators, e.g., singular value spread (SVS), and channel capacity are derived. Finally, the simulation results are given and consistent with some measurements in relevant literatures, which validate that the proposed channel model has a certain value as a reference to model massive MIMO channel characteristics.

eess.SP↗

arXiv2021

A General 3D Non-Stationary Wireless Channel Model for 5G and Beyond

In this paper, a novel three-dimensional (3D) non-stationary geometry-based stochastic model (GBSM) for the fifth generation (5G) and beyond 5G (B5G) systems is proposed. The proposed B5G channel model (B5GCM) is designed to capture various channel characteristics in (B)5G systems such as space-time-frequency (STF) non-stationarity, spherical wavefront (SWF), high delay resolution, time-variant velocities and directions of motion of the transmitter, receiver, and scatterers, spatial consistency, etc. By combining different channel properties into a general channel model framework, the proposed B5GCM is able to be applied to multiple frequency bands and multiple scenarios, including massive multiple-input multiple-output (MIMO), vehicle-to-vehicle (V2V), high-speed train (HST), and millimeter wave-terahertz (mmWave-THz) communication scenarios. Key statistics of the proposed B5GCM are obtained and compared with those of standard 5G channel models and corresponding measurement data, showing the generalization and usefulness of the proposed model.

eess.SP↗

arXiv2020

A 3D Non-Stationary Channel Model for 6G Wireless Systems Employing Intelligent Reflecting Surface

As one of the key technologies for the sixth generation (6G) mobile communications, intelligent reflecting surface IRS) has the advantages of low power consumption, low cost, and simple design methods. But channel modeling is still an open issue in this field currently. In this paper, we propose a three-dimensional (3D) geometry based stochastic model (GBSM) for a massive multiple-input multiple-output (MIMO) communication system employing IRS. The model supports the movements of the transmitter, the receiver, and clusters. The evolution of clusters on the linear array and planar array is also considered in the proposed model. In addition, the generation of reflecting coefficient is incorporated into the model and the path loss of the sub-channel assisted by IRS is also proposed. The steering vector is set up at the base station for the cooperation with IRS. Through studying statistical properties such as the temporal autocorrelation function and space correlation function, the nonstationary properties are verified. The good agreement between the simulation results and the analytical results illustrates the correctness of the proposed channel model.

eess.SP↗

arXiv2020

A Novel 3D Non-Stationary Multi-Frequency Multi-Link Wideband MIMO Channel Model

In this paper, a multi-frequency multi-link three-dimensional (3D) non-stationary wideband multiple-input multiple-output (MIMO) channel model is proposed. The spatial consistency and multi-frequency correlation are considered in parameters initialization of every single-link and different frequencies, including large scale parameters (LSPs) and small scale parameters (SSPs). Moreover, SSPs are time-variant and updated when scatterers and the receiver (Rx) are moving. The temporal evolution of clusters is modeled by birth and death processes. The single-link channel model which has considered the inter-correlation can be easily extended to multi-link channel model. Statistical properties, including spatial cross-correlation function (CCF), power delay profile (PDP), and correlation matrix collinearity (CMC) are investigated and compared with the 3rd generation partner project (3GPP) TR 38.901 and quasi deterministic radio channel generator (QuaDRiGa) channel models. Besides, the CCF is validated against measurement data.

cs.IT↗

arXiv2020

6G Oriented Wireless Communication Channel Characteristics Analysis and Modeling

Based on the vision on the 6G wireless communication network, i.e., global coverage, all spectrums and all applications, we comprehensively survey 6G related wireless channel measurements, channel characteristics, and channel models for all frequency bands and all scenarios. Millimeter wave (mmWave), terahertz (THz), optical band, satellite, unmanned aerial vehicle (UAV), maritime, underwater acoustic, high-speed train (HST), vehicle-to-vehicle (V2V), massive/ ultra-massive multiple-input multiple-output (MIMO), orbital angular momentum (OAM), and industry Internet of things (IoT) communication channels were particularly investigated. The related 6G channel measurement and modeling results were also given. Finally, future research challenges on 6G channel measurements and modeling were pointed out.

eess.SP↗

arXiv2020

End-to-End Energy Efficiency Evaluation for B5G Ultra Dense Networks

Energy efficiency (EE) is a major performance metric for fifth generation (5G) and beyond 5G (B5G) wireless communication systems, especially for ultra dense networks. This paper proposes an end-to-end (e2e) power consumption model and studies the energy efficiency for a heterogeneous B5G cellular architecture that separates the indoor and outdoor communication scenarios in ultra dense networks. In this work, massive multiple-input-multiple-output (MIMO) technologies at conventional sub-6 GHz frequencies are used for long-distance outdoor communications. Light-Fidelity (LiFi) and millimeter wave (mmWave) technologies are deployed to provide a high data rate service to indoor users. Whereas, in the referenced nonseparated system, the indoor users communicate with the outdoor massive MIMO macro base station directly. The performance of these two systems are evaluated and compared in terms of the total power consumption and energy efficiency. The results show that the network architecture which separates indoor and outdoor communication can support a higher data rate transmission for less energy consumption, compared to non-separate communication scenario. In addition, the results show that deploying LiFi and mmWave IAPs can enable users to transmit at a higher data rate and further improve the EE.

eess.SP↗

arXiv2020

Deep Reinforcement Learning for Dynamic Spectrum Sensing and Aggregation in Multi-Channel Wireless Networks

In this paper, the problem of dynamic spectrum sensing and aggregation is investigated in a wireless network containing N correlated channels, where these channels are occupied or vacant following an unknown joint 2-state Markov model. At each time slot, a single cognitive user with certain bandwidth requirement either stays idle or selects a segment comprising C (C < N) contiguous channels to sense. Then, the vacant channels in the selected segment will be aggregated for satisfying the user requirement. The user receives a binary feedback signal indicating whether the transmission is successful or not (i.e., ACK signal) after each transmission, and makes next decision based on the sensing channel states. Here, we aim to find a policy that can maximize the number of successful transmissions without interrupting the primary users (PUs). The problem can be considered as a partially observable Markov decision process (POMDP) due to without full observation of system environment. We implement a Deep Q-Network (DQN) to address the challenge of unknown system dynamics and computational expenses. The performance of DQN, Q-Learning, and the Improvident Policy with known system dynamics is evaluated through simulations. The simulation results show that DQN can achieve near-optimal performance among different system scenarios only based on partial observations and ACK signals.

eess.SP↗

arXiv2020

Multi-Frequency Multi-Scenario Millimeter Wave MIMO Channel Measurements and Modeling for B5G Wireless Communication Systems

Millimeter wave (mmWave) bands have been utilized for the fifth generation (5G) communication systems and will no doubt continue to be deployed for beyond 5G (B5G). However, the underlying channels are not fully investigated at multifrequency bands and in multi-scenarios by using the same channel sounder, especially for the outdoor, multiple-input multiple-output (MIMO), and vehicle-to-vehicle (V2V) conditions. In this paper, we conduct multi-frequency multi-scenario mmWave MIMO channel measurements with 4*4 antennas at 28, 32, and 39 GHz bands for three cases, i.e., the human body and vehicle blockage measurements, outdoor path loss measurements, and V2V measurements. The channel characteristics, including blockage effect, path loss and coverage range, and non-stationarity and spatial consistency, are thoroughly studied. The blockage model, path loss model, and time-varying channel model are proposed for mmWave MIMO channels. The channel measurement and modeling results will be of great importance for further mmWave communication system deployments in indoor hotspot, outdoor, and vehicular network scenarios for B5G.

eess.SP↗

arXiv2020

A Non-Stationary VVLC MIMO Channel Model for Street Corner Scenarios

In recent years, the application potential of visible light communication (VLC) technology as an alternative and supplement to radio frequency (RF) technology has attracted people's attention. The study of the underlying VLC channel is the basis for designing the VLC communication system. In this paper, a new non-stationary geometric street corner model is proposed for vehicular VLC (VVLC) multiple-input multiple-output (MIMO) channel. The proposed model takes into account changes in vehicle speed and direction. The category of scatterers includes fixed scatterers and mobile scatterers (MS). Based on the proposed model, we derive the channel impulse response (CIR) and explore the statistical characteristics of the VVLC channel. The channel gain and root mean square (RMS) delay spread of the VVLC channel are studied. In addition, the influence of velocity change on the statistical characteristics of the model is also investigated. The proposed channel model can guide future vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) optical communication system design.

eess.SP↗

arXiv2020

Effects of Digital Map on the RT-based Channel Model for UAV mmWave Communications

Based on the geometry and ray tracing (RT) theory, a millimeter wave (mmWave) channel model and parameter computation method for unmanned aerial vehicle (UAV) assisted air-to-ground (A2G) communications are proposed in this paper. In order to speed up the parameter calculation, a reconstruction process of scene database on the original digital map is developed. Moreover, the effects of reconstruction accuracy on the channel parameter and characteristic are analyzed by extensive simulations at 28 GHz under the campus scene. The simulation and analysis results show that the simplified database can save up to 50% time consumption. However, the difference of statistical properties is slight in the campus scenario.

eess.SP↗