arXiv subjects

Cheng-Xiang Wang

Publications and source records attributed to Cheng-Xiang Wang.

At least 109 records · Page 6Linked to original sources

arXiv2020

BER Performance of Spatial Modulation Systems Under a Non-Stationary Massive MIMO Channel Model

In this paper, the bit error rate (BER) performance of spatial modulation (SM) systems is investigated both theoretically and by simulation in a non-stationary Kronecker-based massive multiple-input-multiple-output (MIMO) channel model in multi-user (MU) scenarios. Massive MIMO SM systems are considered in this paper using both a time-division multiple access (TDMA) scheme and a block diagonalization (BD) based precoding scheme, for different system settings. Their performance is compared with a vertical Bell labs layered space-time (V-BLAST) architecture based system and a conventional channel inversion system. It is observed that a higher cluster evolution factor can result in better BER performance of SM systems due to the low correlation among sub-channels. Compared with the BD-SM system, the SM system using the TDMA scheme obtains a better BER performance but with a much lower total system data rate. The BD-MU-SM system achieves the best trade-off between the data rate and the BER performance among all of the systems considered. When compared with the V-BLAST system and the channel inversion system, SM approaches offer advantages in performance for MU massive MIMO systems.

eess.SP↗

arXiv2020

Cell-Free Satellite-UAV Networks for 6G Wide-Area Internet of Things

In fifth generation (5G) and beyond Internet of Things (IoT), it becomes increasingly important to serve a massive number of IoT devices outside the coverage of terrestrial cellular networks. Due to their own limitations, unmanned aerial vehicles (UAVs) and satellites need to coordinate with each other in the coverage holes of 5G, leading to a cognitive satellite-UAV network (CSUN). In this paper, we investigate multi-domain resource allocation for CSUNs consisting of a satellite and a swarm of UAVs, so as to improve the efficiency of massive access in wide areas. Particularly, the cell-free on-demand coverage is established to overcome the cost-ineffectiveness of conventional cellular architecture. Opportunistic spectrum sharing is also implemented to cope with the spectrum scarcity problem. To this end, a process-oriented optimization framework is proposed for jointly allocating subchannels, transmit power and hovering times, which considers the whole flight process of UAVs and uses only the slowly-varying large-scale channel state information (CSI). Under the on-board energy constraints of UAVs and interference temperature constraints from UAV swarm to satellite users, we present iterative multi-domain resource allocation algorithms to improve network efficiency with guaranteed user fairness. Simulation results demonstrate the superiority of the proposed algorithms. Moreover, the adaptive cell-free coverage pattern is observed, which implies a promising way to efficiently serve wide-area IoT devices in the upcoming sixth generation (6G) era.

eess.SP↗

arXiv2020

Enabling 5G on the Ocean: A Hybrid Satellite-UAV-Terrestrial Network Solution

Current fifth generation (5G) cellular networks mainly focus on the terrestrial scenario. Due to the difficulty of deploying communications infrastructure on the ocean, the performance of existing maritime communication networks (MCNs) is far behind 5G. This problem can be solved by using unmanned aerial vehicles (UAVs) as agile aerial platforms to enable on-demand maritime coverage, as a supplement to marine satellites and shore-based terrestrial based stations (TBSs). In this paper, we study the integration of UAVs with existing MCNs, and investigate the potential gains of hybrid satellite-UAV-terrestrial networks for maritime coverage. Unlike the terrestrial scenario, vessels on the ocean keep to sea lanes and are sparsely distributed. This provides new opportunities to ease the scheduling of UAVs. Also, new challenges arise due to the more complicated maritime prorogation environment, as well as the mutual interference between UAVs and existing satellites/TBSs. We discuss these issues and show possible solutions considering practical constraints.

eess.SP↗

arXiv2020

Rethinking Blockchains in the Internet of Things Era from a Wireless Communication Perspective

Due to the rapid development of Internet of Things (IoT), a massive number of devices are connected to the Internet. For these distributed devices in IoT networks, how to ensure their security and privacy becomes a significant challenge. The blockchain technology provides a promising solution to protect the data integrity, provenance, privacy, and consistency for IoT networks. In blockchains, communication is a prerequisite for participants, which are distributed in the system, to reach consensus. However, in IoT networks, most of the devices communicate through wireless links, which are not always reliable. Hence, the communication reliability of IoT devices influences the system security. In this article, we rethink the roles of communication and computing in blockchains by accounting for communication reliability. We analyze the tradeoff between communication reliability and computing power in blockchain security, and present a lower bound to the computing power that is needed to conduct an attack with a given communication reliability. Simulation results show that adversarial nodes can succeed in tampering a block with less computing power by hindering the propagation of blocks from other nodes.

cs.CR↗

arXiv2020

Optimal Beamforming for Hybrid Satellite Terrestrial Networks with Nonlinear PA and Imperfect CSIT

In hybrid satellite-terrestrial networks (HSTNs), spectrum sharing is crucial to alleviate the "spectrum scarcity" problem. Therein, the transmit beams should be carefully designed to mitigate the inter-satellite-terrestrial interference. Different from previous studies, this work considers the impact of both nonlinear power amplifier (PA) and large-scale channel state information at the transmitter (CSIT) on beamforming. These phenomena are usually inevitable in a practical HSTN. Based on the Saleh model of PA nonlinearity and the large-scale multi-beam satellite channel parameters, we formulate a beamforming optimization problem to maximize the achievable rate of the satellite system while ensuring that the inter-satellite-terrestrial interference is below a given threshold. The optimal amplitude and phase of desired beams are derived in a decoupled manner. Simulation results demonstrate the superiority of the proposed beamforming scheme.

cs.NI↗

arXiv2020

A Big Data Enabled Channel Model for 5G Wireless Communication Systems

The standardization process of the fifth generation (5G) wireless communications has recently been accelerated and the first commercial 5G services would be provided as early as in 2018. The increasing of enormous smartphones, new complex scenarios, large frequency bands, massive antenna elements, and dense small cells will generate big datasets and bring 5G communications to the era of big data. This paper investigates various applications of big data analytics, especially machine learning algorithms in wireless communications and channel modeling. We propose a big data and machine learning enabled wireless channel model framework. The proposed channel model is based on artificial neural networks (ANNs), including feed-forward neural network (FNN) and radial basis function neural network (RBF-NN). The input parameters are transmitter (Tx) and receiver (Rx) coordinates, Tx-Rx distance, and carrier frequency, while the output parameters are channel statistical properties, including the received power, root mean square (RMS) delay spread (DS), and RMS angle spreads (ASs). Datasets used to train and test the ANNs are collected from both real channel measurements and a geometry based stochastic model (GBSM). Simulation results show good performance and indicate that machine learning algorithms can be powerful analytical tools for future measurement-based wireless channel modeling.

eess.SP↗

arXiv2020

A Novel 3D Space-Time-Frequency Non-Stationary Channel Model for 6G THz Indoor Communication Systems

Terahertz (THz) communication is now being considered as one of possible technologies for the sixth generation (6G) communication systems. In this paper, a novel three-dimensional (3D) space-time-frequency non-stationary massive multiple-input multiple-output (MIMO) channel model for 6G THz indoor communication systems is proposed. In this geometry-based stochastic model (GBSM), the initialization and evolution of parameters in time, space, and frequency domains are developed to generate the complete channel transfer function (CTF). Based on the proposed model, the correlation functions including time auto-correlation function (ACF), spatial crosscorrelation function (CCF), and frequency correlation function (FCF) are investigated. The results show that the statistical properties of the simulation model match well with those of the theoretical model. The stationary intervals at different frequencies are simulated. The non-stationarity in time, space, and frequency domains is verified by theoretical derivations and simulations.

eess.SP↗

arXiv2020

Genetic Algorithm Optimized Support Vector Machine in NOMA-Based Satellite Networks with Imperfect CSI

With the help of a power-domain non-orthogonal multiple access (NOMA) scheme, satellite networks can simultaneously serve multiple users within limited time/spectrum resource block. However, the existence of channel estimation errors inevitably degrade the judgment on users' channel state information (CSI) accuracy, thus affecting the user pairing processing and suppressing the superiority of the NOMA scheme. Inspired by the advantages of machine learning (ML) algorithms, we propose an improved support vector machine (SVM) scheme to reduce the inappropriate user pairing risks and enhance the performance of NOMA based satellite networks with imperfect CSI. Particularly, a genetic algorithm (GA) is employed to optimize the regularization and kernel parameters of the SVM, which effectively improves the classification accuracy of the proposed scheme. Simulations are provided to demonstrate that the performance of the proposed method is better than that with random user paring strategy, especially in the scenario with a large number of users.

eess.SP↗

arXiv2020

A Novel Massive MIMO Beam Domain Channel Model

A novel beam domain channel model (BDCM) for massive multiple-input multiple-output (MIMO) communication systems has been proposed in this paper. The near-field effect and spherical wavefront are firstly assumed in the proposed model, which is different from the conventional BDCM for MIMO based on the far-field effect and plane wavefront assumption. The proposed novel BDCM is the transformation of an existing geometry-based stochastic model (GBSM) from the antenna domain into beam domain. The space-time non-stationarity is also modeled in the novel BDCM. Moreover, the comparison of computational complexity for both models is studied. Based on the numerical analysis, comparison of cluster-level statistical properties between the proposed BDCM and existing GBSM has shown that there exists little difference in the space, time, and frequency correlation properties for two models. Also, based on the simulation, coherence bandwidths of the two models in different scenarios are almost the same. The computational complexity of the novel BDCM is much lower than the existing GBSM. It can be observed that the proposed novel BDCM has similar statistical properties to the existing GBSM at the clusterlevel. The proposed BDCM has less complexity and is therefore more convenient for information theory and signal processing research than the conventional GBSMs.

eess.SP↗

arXiv2020

A Practical Non-Stationary Channel Model for Vehicle-to-Vehicle MIMO Communications

In this paper, a practical model for non-stationary Vehicle-to-Vehicle (V2V) multiple-input multiple-output (MIMO) channels is proposed. The new model considers more accurate output phase of Doppler frequency and is simplified by the Taylor series expansions. It is also suitable for generating the V2V channel coefficient with arbitrary velocities and trajectories of the mobile transmitter (MT) and mobile receiver (MR). Meanwhile, the channel parameters of path delay and power are investigated and analyzed. The closed-form expressions of statistical properties, i.e., temporal autocorrelation function (TACF) and spatial cross-correlation function (SCCF) are also derived with the angle of arrival (AoA) and angle of departure (AoD) obeying the Von Mises (VM) distribution. In addition, the good agreements between the theoretical, simulated and measured results validate the correctness and usefulness of the proposed model.

eess.SP↗

arXiv2020

Artificial Intelligence Enabled Wireless Networking for 5G and Beyond: Recent Advances and Future Challenges

The fifth generation (5G) wireless communication networks are currently being deployed, and beyond 5G (B5G) networks are expected to be developed over the next decade. Artificial intelligence (AI) technologies and, in particular, machine learning (ML) have the potential to efficiently solve the unstructured and seemingly intractable problems by involving large amounts of data that need to be dealt with in B5G. This article studies how AI and ML can be leveraged for the design and operation of B5G networks. We first provide a comprehensive survey of recent advances and future challenges that result from bringing AI/ML technologies into B5G wireless networks. Our survey touches different aspects of wireless network design and optimization, including channel measurements, modeling, and estimation, physical-layer research, and network management and optimization. Then, ML algorithms and applications to B5G networks are reviewed, followed by an overview of standard developments of applying AI/ML algorithms to B5G networks. We conclude this study by the future challenges on applying AI/ML to B5G networks.

cs.NI↗

arXiv2019

Maritime Coverage Enhancement Using UAVs Coordinated with Hybrid Satellite-Terrestrial Networks

Due to its agile maneuverability, unmanned aerial vehicles (UAVs) have shown great promise for ondemand communications. In practice, UAV-aided aerial base stations are not separate. Instead, they rely on existing satellites/terrestrial systems for spectrum sharing and efficient backhaul. In this case, how to coordinate satellites, UAVs and terrestrial systems is still an open issue. In this paper, we deploy UAVs for coverage enhancement of a hybrid satellite-terrestrial maritime communication network. Under the typical composite channel model including both large-scale and small-scale fading, the UAV trajectory and in-flight transmit power are jointly optimized, subject to constraints on UAV kinematics, tolerable interference, backhaul, and the total energy of UAV for communications. Different from existing studies, only the location-dependent large-scale channel state information (CSI) is assumed available, because it is difficult to obtain the small-scale CSI before takeoff in practice, and the ship positions can be obtained via the dedicated maritime Automatic Identification System. The optimization problem is non-convex. We solve it by problem decomposition, successive convex optimization and bisection searching tools. Simulation results demonstrate that the UAV fits well with existing satellite and terrestrial systems, using the proposed optimization framework.

cs.IT↗

arXiv2018

A Study of Delay Drifts on Massive MIMO Wideband Channel Models

In this paper, we study the effects of the variations of the propagation delay over large-scale antenna-arrays used in massive multiple-input multiple-output (MIMO) wideband communication systems on the statistical properties of the channel. Due to its simplicity and popularity, the Elliptical geometry-based stochastic channel model (GBSM) is employed to demonstrate new non-stationary properties of the channel in the frequency and spatial domains caused by the drift of delays. In addition, we show that the time of travel of multi-path components (MPCs) over large-scale arrays may result in overlooked frequency and spatial decorrelation effects. These are theoretically demonstrated by deriving the space-time-frequency correlation functions (STFCFs) of both narrowband and wideband Elliptical models. Closed-form expressions of the array-variant frequency correlation function (FCF), power delay profile (PDP), mean delay, and delay spread of single- and multi-confocal Elliptical models are derived when the angles of arrival (AOAs) are von Mises distributed. In such conditions, we find that the large dimensions of the antenna array may limit the narrowband characteristic of the single-ellipse model and alter the wideband characteristics (PDP and FCF) of the multi-confocal Elliptical channel model. Although we present and analyze numerical and simulation results for a particular GBSM, similar conclusions can be extended to other GBSMs.

cs.IT↗

arXiv2017

Beamspace SU-MIMO for Future Millimeter Wave Wireless Communications

For future networks (i.e., the fifth generation (5G) wireless networks and beyond), millimeter-wave (mmWave) communication with large available unlicensed spectrum is a promising technology that enables gigabit multimedia applications. Thanks to the short wavelength of mmWave radio, massive antenna arrays can be packed into the limited dimensions of mmWave transceivers. Therefore, with directional beamforming (BF), both mmWave transmitters (MTXs) and mmWave receivers (MRXs) are capable of supporting multiple beams in 5G networks. However, for the transmission between an MTX and an MRX, most works have only considered a single beam, which means that they do not make full potential use of mmWave. Furthermore, the connectivity of single beam transmission can easily be blocked. In this context, we propose a single-user multi-beam concurrent transmission scheme for future mmWave networks with multiple reflected paths. Based on spatial spectrum reuse, the scheme can be described as a multiple-input multiple-output (MIMO) technique in beamspace (i.e., in the beam-number domain). Moreover, this study investigates the challenges and potential solutions for implementing this scheme, including multibeam selection, cooperative beam tracking, multi-beam power allocation and synchronization. The theoretical and numerical results show that the proposed beamspace SU-MIMO can largely improve the achievable rate of the transmission between an MTX and an MRX and, meanwhile, can maintain the connectivity.

cs.NI↗

arXiv2016

Channel Measurements and Models for High-Speed Train Wireless Communication Systems in Tunnel Scenarios: A Survey

The rapid developments of high-speed trains (HSTs) introduce new challenges to HST wireless communication systems. Realistic HST channel models play a critical role in designing and evaluating HST communication systems. Due to the length limitation, bounding of tunnel itself, and waveguide effect, channel characteristics in tunnel scenarios are very different from those in other HST scenarios. Therefore, accurate tunnel channel models considering both large-scale and small-scale fading characteristics are essential for HST communication systems. Moreover, certain characteristics of tunnel channels have not been investigated sufficiently. This article provides a comprehensive review of the measurement campaigns in tunnels and presents some tunnel channel models using various modeling methods. Finally, future directions in HST tunnel channel measurements and modeling are discussed.

cs.NI↗

arXiv2016

Capacity and Delay Tradeoff of Secondary Cellular Networks with Spectrum Aggregation

Cellular communication networks are plagued with redundant capacity, which results in low utilization and cost-effectiveness of network capital investments. The redundant capacity can be exploited to deliver secondary traffic that is ultra-elastic and delay-tolerant. In this paper, we propose an analytical framework to study the capacity-delay tradeoff of elastic/secondary traffic in large scale cellular networks with spectrum aggregation. Our framework integrates stochastic geometry and queueing theory models and gives analytical insights into the capacity-delay performance in the interference limited regime. Closed-form results are obtained to characterize the mean delay and delay distribution as functions of per user throughput capacity. The impacts of spectrum aggregation, user and base station (BS) densities, traffic session payload, and primary traffic dynamics on the capacity-delay tradeoff relationship are investigated. The fundamental capacity limit is derived and its scaling behavior is revealed. Our analysis shows the feasibility of providing secondary communication services over cellular networks and highlights some critical design issues.

cs.NI↗

arXiv2016

A Dual-Directional Path-loss Model in 5G Wireless Fractal Small Cell Networks

With the anticipated increase in the number of low power base stations (BSs) deployed in small cell networks, blockage effects becoming more sensitive on wireless transmissions over high spectrums, variable propagation fading scenarios make it hard to describe coverage of small cell networks. In this paper, we propose a dual-directional path loss model cooperating with Line-of-Sight (LoS) and Non-Line-of-Sight (NLoS) transmissions for the fifth generation (5G) fractal small cell networks. Based on the proposed path loss model, a LoS transmission probability is derived as a function of the coordinate azimuth of the BS and the distance between the mobile user (MU) and the BS. Moreover, the coverage probability and the average achievable rate are analyzed for 5G fractal small cell networks. Numerical results imply that the minimum intensity of blockages and the maximum intensity of BSs can not guarantee the maximum average achievable rate in 5G fractal small cell networks. Our results explore the relationship between the anisotropic path loss fading and the small cell coverage in 5G fractal small cell networks.

cs.NI↗

arXiv2016

Wireless Fractal Cellular Networks

With the seamless coverage of wireless cellular networks in modern society, it is interesting to consider the shape of wireless cellular coverage. Is the shape a regular hexagon, an irregular polygon, or another complex geometrical shape? Based on fractal theory, the statistical characteristic of the wireless cellular coverage boundary is determined by the measured wireless cellular data collected from Shanghai, China. The measured results indicate that the wireless cellular coverage boundary presents an extremely irregular geometrical shape, which is also called a statistical fractal shape. Moreover, the statistical fractal characteristics of the wireless cellular coverage boundary have been validated by values of the Hurst parameter estimated in angular scales. The statistical fractal characteristics of the wireless cellular coverage boundary can be used to evaluate and design the handoff scheme of mobile user terminals in wireless cellular networks.

cs.NI↗